Seperate valuation for material in different location/plant

Dear Guru,
According to our business process, we do have stor. loc at HQ (Malaysia) & Brunei. Even the stor. loc at different country, both falls under same plant & c/code. But HQ selling prod. to Brunei branch. So far they use SD consignment process to the  customer at brunei. Stock transfer from HQ to Brunei branch.
Now, user wanted to have business process such below;
EXP:
Plant A u2013 HQ (this plant already exist with mat master)
-     Mat 1 u2013 RM1 (material master u2013 acct. view 1)
Plant B u2013 brunei ( so far dont have such plant, only stor loc. available at brunei but now we would like to create plant for brunei since user request business process as stated below)
(both under same c/code)
Now the business process they request is;
Plant B raised PO to plant A
-     Means plant A is vendor for plant B
-     Here the price stated as rm2 & qty 1      
Plant A raised SO (based on plant Bu2019s PO)
-     Means plant B is customer for plant A
-     SO price & qty based on PO (rm2 & qty1)
- complete the SO & PO process (including material movement)
- mat master for mat 1 at plant A u2013 shows 1 qty reduced (under mat cost rm1)
- mat master for mat 1 at plant B u2013 shows 1 qty increase with mat cost rm2
Beside this all other acct entry will take place such COGS (SO). User wanted both PO & SO process. User unlikely keen to do STO coz it only applies material cost. User wanted to see separate valuation for brunei branch & would have P & L report for HQ & brunei.
- I guess split valuation is not a right choice to show the PO & SO process.
What is the best solution for this business needsu2026
Any idea?
rgds,
nanthakumar

Hi Hammad Shahid,
In SPRO (OPJJ) check which checking rule has the following setting storage location check - No storage loc check box is not active that combination of checking rule and checking group should be used .
In OPJJ you can see the details of whether storage location stock to be considered or plant level stock to be considered.
if you activate the check no storage loc insp then stock is considered as plant level, if you uncheck it stock will be considered for ATP @ stocrage loc level mainatined in the transaction during ATP check.
Hope work for you.
Regards,
R.Brahmankar

Similar Messages

  • No characteristics found for configuration valuation for material YYTESMAT-

    Hi
       in tcode PDN I am createing a filter and asing material yytesmat to it
    when i try to assing characteristic to it i am getting error
    'No characteristics found for configuration valuation for material YYTESMAT'
    pls help how to solve this error
    FYI :I have enter characteristic name in classifcation tab while creating material
    pls reply psl reply
    Edited by: pankesh betala on Jun 2, 2010 10:34 AM
    Edited by: pankesh betala on Jun 3, 2010 8:04 AM

    Hi,
    As you said there is no data in material master for this material. this may be the reason for this. Try loading this material master and perform attribute change run. This should solve the issue.
    thanks,
    JituK

  • Thread: moving price for material is negative:1111 plant 100

    hi
    while doing MIRO we are getting the below mentioned error
    moving price for material is negative: 1111 plant 100
    please suggest me how to rectify this issue.
    Regards
    Rajinder Sharma

    Hi Sharma,
       Please go through the below thread if would help you to solve the problem
    Miro : Moving average price for material is negative:mat  XXXXX plant yyyy
    Shankar.

  • Different Valuations for material under a Plant

    Dear experts,
    I have created the a plant & assigned different storage locations under the plant. Is it possible to have MAP (Valuation) at storage location level?
    Is it possible to have split valuation at a plant level or is it at the Company code level?
    If it is possible can you send the configuration to my ID vskrishna#gmail.com
    Useful answers shall be duly rewarded.
    Useful answers duly rewarded

    Hi,
    It is not possible to have split valuation activated at storage location level. But yes, it is possible to activate it at plant level.
    In Material Master Table, at the time of creation of master data, there is a field in Accounting-1 view. The field name is "Valuation Category".
    OMWC & OMW0 are t-codes for configuring & activating split valuation.
    Specify the valuation category (u can create user defined category also as per your requirement) when creating material at plant level and goto organizational level tab. Select valuation type created through above t-codes to split valuation of material.
    Also please note and ensure that if you want to have split valuation of a particular material then it has to have price indicator "V" at header level. And only at split level you can have indicator "S". Bocs if you put indicator "S" at header level you can not have split valuation activated.
    please revert in case of any doubt.

  • Split valuation for  material with two different price indicator S and V

    Hello Gurus,
    Is it possible to maintain split valuation for same material with two different price indicator S and V.
    For Ex. Material A is manufactured can be manufactured in house ,  procured from outside vendor and can be purchased from subcontracting vendor by providing raw material.
    We want to keep  Price control V for same material " A"  which is procured from outside vendor.
    And price control S for inhouse produced same material " A".
    Besically this material is semifinished and having BOM for subcontracting.
    Please advice.

    Hi
    When the material is split valuated, you maintain the accounting view for the material 1st with valuation category, here the price control should be V.
    When you will extend the material to valuation type "Inhouse mfgd" maintain the price control as S, for valuation type "Procured form outside vendor" maintain it as V.
    Regards
    Prasad

  • How to change commodity Code for material grp in certain plant

    Hi,
    I would like to change commodity code for some material group under certain plant
    May I know how to do this.
    I went to the following SPRO path, however, the table does not mention the plant and the material group for me to change.
    SD>Foreign Trade/Customs>Basic Data For Foreign Trade>Define Commodity Code/Import Code Numbres by Country.
    Please let me know.
    Thank.
    Tuff

    Hi,
    Commodity codes are define at country code level not on basis of plant or material group
    Weather it is one plant or many plants belongs from one company or different companies the commodity code is unique and it define by country legal authorities which are responsible for foreign trade.
    You can add commodity code for country and then you individually or by mass change you can change in material master.
    Kapil

  • Parallel currency valuation for material management

    Dear all,
    My comapny is maintaining parallel currency in company code in new GL, does this impact material management also.
    Should we need to activate material ledger for parallel valuation in material management, but the company is not actually into production but it still require activation of material ledger.
    Regards,

    Hi Shilpa,
    How I understand it using the U.S as my example:
    In the first transaction code, in other words, F.05 or FAGL_FC_VAL  are used if the currency in the transaction is not the same as the local currency of the company.  For instance, U.S GAAP mandates companies to report their financial statements in local or functional currency.  So let's say the transaction currency for a U.S company code is/was GBP.  However, GBP is not the local currency of the U.S company code so you would to have perform foreign currency valuation with any of the above named transaction codes using the exchange rate of the key date specified at the time of the valuation.  This valuation will then give you a gain or loss as a result of differences between the original amount and the revaluated amount.
    The second transaction code FAGL_FC_TRANS valuates the balances or additional currencies.  But to be able to run this second transaction code, you would first have to perform FAGL_FC_VAL or F.05 first (this is a prerequisite). 
    So even if you are to perform currency translation, you will still need to run FAGL_FC_VAL first.
    Regards,
    Elias

  • Changing commodity Code for material grp under certain plant

    Hi,
    I would like to change commodity code for some material group under certain plant
    May I know how to do this.
    I went to the following SPRO path, however, the table does not mention the plant and the material group for me to change.
    SD>Foreign Trade/Customs>Basic Data For Foreign Trade>Define Commodity Code/Import Code Numbres by Country.
    Please let me know.
    Thank.
    Tuff

    Hi Tuffy,
    The commodity codes are defined by Country, not at Plant-Material group level.
    You can find this customising on: SPRO > Materials Management > Purchasing > Foreign Trade/Customs > Basic Data for Foreign Trade > Define Commodity Codes / Import Code Numbers by Country.
    I hope this help.
    Kind regards,
    Sandra

  • PLANT FOR GOODS ENTRY DIFFERENT FROM PLANT IN PURCHASE ORDER

    Good Morning.
    My customer, asked me, if it was possible to make a purchase order in a single company and relevant purchase organization and plant, and the  goods entry for another plant referred to another company.
    Ex. Purchase Order for Company 01 and Plant 01
    Goods Entry for Company 02 and Plant 02.
    Thank you in advance for your cooperation
    Francisco

    Hi Francisco
    It is not possible to have PO on 1 Co and Plant 1 and GRN on Co 2 and plant 2.
    Whereas it is not logical also.
    Because Plants are Valuation area and ,If you have balance sheet on valuation area then in that case you can understand what would have happened if this scenario would have been feasible.
    Well what you can do..
    Create PO on Co Code1 and Plant 1
    Do MIGO ..so u will receive material in Plant 1 ...eg store location 1
    Then after that do Intercompany Stock Transfer
    A number of procedures are available to enable you to transfer materials from one plant to another:
    Stock Transfer Between Plants in One Step
    Stock Transfer Between Plants in Two Steps
    Stock Transport Order Without Delivery
    Stock Transport Order with Delivery via Shipping
    Stock Transport Order with Delivery and Billing Document/Invoice
    Please click on the below link to get more info on Stock transfer
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm
    let me know if you need more info
    Regards
    Shailesh Meshram
    SAP MM/SNC

  • I want to have 2 seperate libraries with content in different locations, can this be done?

    Hi there, I have 2 uses for itunes, one is for my mobile DJ business and for this I store all of my music on a 2TB external firewire 800 HDD I use Traktor Pro to mix, but find itunes very good for creating playlists.  I would however like to be able to store seperate content on my internal drive in a different library for personal use as a great deal of the stuff in my DJ collection I personally have no time for, and do not want the inconvenience of needing to connect my external HDD to be able to listen to my own collection.  I have a SSD installed and have tried depressing the CMD button during startup of the application although no option for creating a new library presents its self, it may be that the start up is too quick for me to be able out this.  Any ideas guys? Many thanks.

    Trying2loveMac wrote:
    Can this be done? If so, how?
    there may be other (better) ways out there but all i can think of is this:
    1) make one iTunes library the main one and "consolidate" files that aren't in it, but in the other computer's libraries, to it.
    you can use home sharing for this but home sharing won't copy ratings, playcounts, and original "date added". a 3rd party tool such as PowerTunes would be very useful if those details are important to you.
    2) once the "main" library is created, copy the entire iTunes folder (not just the iTunes music or media folder) to the media server, launch iTunes while holding the option(⌥) key, click on choose library when prompted, and select the iTunes folder you copied to the new location.
    3) repeat with the other Macs.
    with a setup such as this, be aware that only one iTunes at a time can access the library. if your intention is to enable multiple machines to access the library simultaneously, you will probably have look into a NAS with a built-in iTunes server.

  • Split Valuation For Material Having No Open PO & Stock

    Hi Experts,
    Will somebody throw light on split valuation where there is no any open PR, PO & Stock for that material but system does not allow to make material split valuated.
    System shows error meassge giving old PO nos list.
    (Logically all these POS whole business transcations/cycle is  completed )
    I want split valaution to be done to the material whose stock is nil also there is no any open PR,PO for that plant in the system.
    But I dont prefer to delete line items of the old PO for doing the split valuation.
    Please suggest solution
    Thanks in advance.
    Ramesh
    Edited by: RameshChandra  Soni on May 17, 2008 11:46 AM

    Hi,
    You can find severaé threads about this on this forum.
    Some hints:
    1. In MM02 try to set the split valuation > Save > SAP will give error message > Push the appearing 'Display errors' button > SAP will say what hinders you from being able to set the split valuation.
    2. As I remember stock has to be zero in current and previous period. (You can set your stock to zero in the previous period using MB1A201posting date in the past; after having set split valuation you can reset your stock level via MB1A+202).
    3. IMPORTANT: you have to archive all existing batch records.
    4. etc
    BR
    Csaba

  • Historical valuation for material

    Hi SAP Experts,
    How should I do to control stock materials under historical value?
    If such material is set with standard price, it will not respect the value of each entry: standard price will be maintened.
    If material is set with moving average price, system will calculate moving average price for each entry.
    Someone know how to do it in Sap?
    Tks a lot!
    Patricia

    Hi Patricia,
    what you probably mean is how do you calculate at the end of the month a real unit cost price for each material and the answer is you need to use the material ledger / actual costing  solution from SAP. In this way you valuate all transactions during the month at standard price. At month end closing you can then let SAP run through all these transactions and calculate a "real" cost based on the real quantities and costs that the different transactions produced (purchasing with purchasing variances, production orders with real quantities of material and activities consumed), activity prices taking into account the real costs in the costs centers, etc...and then post additions to the different cost of goods sold accounts to reflect these new unit costs.
    Hope it help, altough you probably found this by now as well.
    best regards,
    Luis
    Edited by: Luis Rocha on May 31, 2011 4:58 PM

  • Split valuation for material

    Dear all,
    I'm facing issue when trying to assign "Valuation category" to Material in Material master Accounting view.
    Purpose of doing this is to achieve split valuation. But system is blocking me to do that due to PO created for the material before.
    Refer below that steps happen for the scenario:
    1. Material 123 created without split valuation.
    2. Create PO 999 for the material 123, follow by full GR of qty 10 and eventually "delivery completed" marked for the material.
    3. Using MIGO movement 261 to perform GI qty 10 for production usage.
    4. Now Production order has been finished, and wish to bring back the qty 10 to Non-valuated stock.
    5. Goto MM02 change Material 123 to assign "Valuation category" in Accounting view. Error returned by system " Purchase order 999 item 00010 already exist".
    For the case, do you know how to get rid of the error in order for me to assign "Valuation category" after PO has been created for the Material?
    Please comment.

    Hi,
    Have you activated Split valuation ???? Before using valuation category.
    the process you followed is correct. Now the stock is 0.
    You need to configure Split Valuation :
    1.To use split valuation, you have to activate it using TCode 'OMW0'.
    2.To select split valuation ('OMWC'), proceed as follows: 
    2.1. Determine the valuation categories and valuation types that are allowed for all valuation areas: 
    - global valuation categories via menu "Goto --> Global Categories" 
    - global valuation types via menu "Goto --> Global Types" 
    2.2. Allocate the valuation types to the valuation categories. 
    a) Select "Goto --> Global Categories". 
    b) Position the cursor on a valuation category and select 
    "Goto --> Global Categories --> Assignments --> 'Types->Category'". 
    c) Activate the valuation types you want. 
    2.3. Determine the local valuation categories for each valuation area. 
    a) Select "Goto --> Local definitions". 
    b) Position the cursor on a valuation area and select 
    "Goto --> Local Definitions --> Allocate Categoires->Org.units (button Cats->(OU)". 
    You obtain a list of the global valuation categories. 
    c) Activate the categories to be used in this valuation area. 
    The system creates the local valuation types based on the allocations under point 2.2.
    Now you assign the Valuation Category in Material MAster Accouinting View.
    Hope this is useful for you.
    Regards,
    Smitha

  • Tcode MB1B (Transfer Postings) material with different Valuation class

    Hi,
    is it possible to avoide tcoce MB1B for material with different valuation class?
    Materia1 (001000) has valuation class: 3000
    Materia2 (300000) has valuation class: 7900
    I don't want allowed MB1B with Material1 (3000) to Material2 (7900).
    Thanks.
    regards, Dieter

    Hi,
    Yes, It is possible to avoide tcoce MB1B for material with different valuation class.
    Regards
    Md.MahaboobKhan

  • Restrict PO creation as material blck for quality reason in other plant

    Hi QM Experts,
    one material (say MAT-1) in maintained in  two plants (Say- X & Y).
    qm in procurement active in material for both the plants.
    created two Q-info records with material MAT-1, vendor ( Say- V-1). one info record for plant X & other for plant Y.
    while creating PO for material -( MAT-1)  in plant X, system giving error- material blocked for quality reason.
    even though in Q-info record for plant X, material is not blocked . it is blocked in Q-info record of plant Y.
    why system looking for plant Y, even when we are trying to create PO in plant X for same material and vendor.
    please guide on same,
    Thanks & Regards,
    Roshan
    Edited by: roshan s on Dec 16, 2011 6:29 AM

    hi,
    Please check ur Q-info of Mat-1 V1 and X properly and please also check ur material master in X, whethere some control key is defined in QM in Procurement or Not. If any control key is there than chcek the settings of that control key and as per ur requirement remove it .
    regards

Maybe you are looking for