Sepia Tone
PSE 4.0; WIN XP; Can anyone tell me how to get a sepia tone rendition of an image. I can get from color to b/w (Image>Mode>gray Scale, etc.) but don't know how to get the brown-bronze Sepia.
Have not been successful using the HELP file. Appreciate any advice either to this forum or to my email at : [email protected]
Marc,<br /><br />Since this question comes up so often, here is my "canned" sepia presentation. It is for PSE2 so there might be slight differences in PSE4. <br /><br />Method 1<br />--------<br />1. If image is greyscale, convert to RGB:<br /> Image -> Mode -> RGB Color<br />2. Enhance -> Adjust Color -> Hue/Saturation<br />3. Click Colorize box to convert picture to one color<br />4. Slide hue to the left to get a sepia tone, and adjust saturation.<br /> Try 30 and 25 for starters.<br />5. Optionally, add contrast:<br /> or<br /> Enhance -> Adjust Brightness/Contrast -> Levels<br /><br />Note: steps 2,5 can be done on adjustment layers.<br /><br />Method 2<br />--------<br />1. If image is in greyscale, convert it to RGB:<br /> Image -> Mode -> RGB Color<br />2. Remove any color: <br /> Enhance -> Adjust Color -> Remove Color<br />3. Enhance -> Adjust Color -> Color Variations. <br />4. Select Midtones<br />5. Start with Amount slider one notch left of the middle. <br />6. Increase Red once.<br />7. Decrease Blue once.<br />8. If results not OK,<br /> Reset Image, move Amount Slider and try again.<br />9. Optionally: <br /> Fine-tune color with Hue/Saturation layer.<br /> To make photo look grainy, Filter -> Noise -> Add Noise<br /><br />Method 3<br />--------<br />1. In Layer Styles, choose Photographics Effects -> Sepia Tone.<br />2. Make further adjustments using Enhance -> Adjust Color -> Hue/Saturation<br /><br />Method 4<br />--------<br />1. If image is in RGB, remove color: Enhance -> Color -> Remove Color. <br />2. If image is in grayscale, convert it to RGB: Image -> Mode -> RGB Color.<br />3. Choose Layer -> New Fill Layer -> Solid Color. <br /> Name the layer, choose Overlay from Blend Mode drop down menu. <br />4. Pick a sepia color using color picker, click OK.<br />5. Go to Layers palette and lower adjustment layers opacity to 40 % <br /> (experiment with this setting, it's just a starting point). <br />6. For softer effect, change adjustment layer Blend Mode to Color. <br />7. To further adjust color, double-click adjustment layer icon in palette.<br /><br />Method 5<br />--------<br />1. Create a solid color adjustment layer above your image, with your choice of brown. <br />2. Set the solid color adjustment layer's blend mode to color.<br /> You may want to desaturate image before applying the brown tone:<br /> Enhance -> Adjust Color -> Remove Color<br /> You don't have to do this but it is something to consider. <br />3. Futher adjust by double clicking adjustment layer icon to change <br /> color, or adding a hue/saturation layer to adjust color.<br /><br />Method 6 (Gradient Map)<br />-----------------------<br />1. Desaturate image: Enhance -> Adjust color -> Remove color <br />2. Create Gradient Map adjustment layer.<br />3. When Gradient Map dialog comes up, you are on default gradient. Click it to open full Gradient dialog. Select sepia from Patti's Classic Duotones.<br /> (Classic Duotones are at www.adobestudioexchange.com/item/10279).<br />4. Set blend mode of gradient layer to Multiply. <br /> Shortcut: In step 2 hold down <Alt> when clicking adjustment layer icon. This allows you to choose Multiply blend mode before selecting gradient.<br />5. Further adjust sepia by adding Hue/Saturation layer.<br /><br />Method 7<br />--------<br />Print -> Properties -> Effects -> Monochrome Effects
Similar Messages
-
Hi All,
I have looked at the presets for sepia tone, it basically sucks.... Any body who has ever done sepia toning would find the results garish. But I can not for the life of me figure out how to duplicate the look my self, or how to adjust the result of the preset.
May be I am just tired (worked 12 hours today....)
Could some body please give me an idea how to achieve a BxW Toned look to photos? I would like to do sepia for this client, but may need to do other colors in the future.
Thanks in advance!! And if it is really easy and I missed it, I apologize, like I said I am tired and need to get this done. Thanks again
PaulI'm using PS Elements 2.0 with Windows. Trying to do a photocollage of old (sepia) photos. I edited the photos individually, then moved them to the large photocollage, and while highlighted, added the sepia tone with Layers, Hue/Saturation, colorize, then set the 3 settings for each. (When I initially had tried to add the sepia and then move the individual photos over, it came up blank, because only the fill layer was moved, rather than the image.) When I tested these individually by printing them out, it worked fine. But when I created the final photocollage, moved the images separately over to it, and re-created the sepia tone with my test settings, the first one or two worked fine, but then all the others showed up with the same setting - they all had the same sepia tone, but not the one I had set for them. In addition, they were all washed out - no contrast, different shade of sepia than I wanted, very faded with low resolution. Even black ornamental touches showed up as sepia when I moved them, without my adding any sepia to them. I was also unable to edit them in their Layers fill palette - when I lowered or raised the settings arrow, nothing changed in the photos. I was only able to use the Enhance/Brightness-Contrast settings to set more contrast, but not able to change the sepia color. When I increased the contrast, eventually it got very RED and unattractive. When I printed these out, they were not much better than before I added more contrast. Why is this happening, and what can I do about it? What is the best way to get sepia tone in PS Elements?
-
Sepia Tone Photographs in Photoshop Elements 9
Yesterday, I purchased Photoshop Elements 9 to replace and upgrade my earlier version (Photospho Elements 7).
What is the best way to convert a photograph to a sepia tone photograph in Photoshop Elements 9.
Thanks so very much for your help and assistance.Another way:
Open picture file
Open Photofilter adjustment layer at the top of the stack of layers in the layers palette
Select Sepia from the filter dropdown
Adjust density with the slider. -
Can I remove sepia tone but keep crop and other tone settings?
I can't figure out how to remove the creative setting "Sepia tone" without resetting all settings on an image. Is there a way?
You may be able to Copy the latest settings (using the COPY button below the History Panel). Highlight the latest settings in the History Panel and click COPY.
In the Pop-up screen, select only those changes that you made after applying the Preset, such as exposure, etc by ticking appropriate boxes.
Then Click on History Step before the Sepia Tone step. Click Copy.
It may not work if some of your changes after applying the Sepia Tone altered any settings that the Sepia Tone also alters. You can find what changes the Sepia Tone Preset makes, by right clicking on it in the Presets panel. Export it to, say, your desktop and view its contents using a text editor. The Sepia Tone does change the Tone Curve, Converts to Black and White, and alters Gray Scale Settings among other changes.
So maybe if you experiment with the Copy and paste, you may get close to removing its effects.
Otherwise, I do not know of a way of removing it without also undoing all your post Sepia Tone changes.
Maybe someone else knows a way. -
ColorSync and color profile stuck in sepia tone!
This is a detailed post explaining my problem and everything I've tried. Please help me!
My 1-year-old likes to jam on the keyboard of my iMac G4 (he's a regular mac lover, he is), and as such sometimes messes things up. I never thought he could do any damage to the OS that I couldn't fix, and I have the restore set. Now he's messed it up and I DON'T have the restore set.
Model: iMac G4 800mhz w/ upgraded memory and OS X 10.4.7.
Basically my screen is displaying in nothing but sepia tones. The desktop environment, applications, video, 3D apps...everything. Here is the list of things I attempted that have not worked thus far:
1. Tried changing the filters settings in ColorSync Utility. No filters were set.
2. Tried changing color profiles in Displays, only made slight changes to the same sepia tones (contrast and whatnot)
3. Used First Aid to Verify and Repair my profiles. No problems detected. Still sepia.
4. Tried to create a Calibrated Generic RGB profile without using Expert Mode, to no avail.
I have no idea how to tweak individual RGB settings, especially with no plain RGB shades to work with. Please explain this to me as if I were a 3rd grader...I know that if my baby was able to change this in a few seconds, it's got to be something really simple or else he's an evil mastermind. I'm just missing it somewhere. Help me!Check System Preferences>Universal Access>Seeing to see if any options are turned on that shouldn't be. Some of them can be easily turned on with keyboard shortcuts.
-
All of My B&W pics have a unwanted sepia tone???
All of my B&W photos have a sepia tone to them when I open them in Bridge or Photoshop. Opening them in Autodesk Sketechbook Pro no such issue.
When a folder containing B&W photos is loading in Bridge the thumbnails are initially grayscale but develop the sepia cast after it has completely opened.
In Photoshop I can go to view - proof setup - monitor rgb and get rid of the sepia cast My color setting are appear to correct.Thanks for reply. I'm currently working with cs5 in Windows 7 Home. After opening Photoshop and I go to file- open the selected file opens with all the B&W pictures without having the toning sepia. However,the moment I select a file to open the resulting thumbnail at the bottom of the window has the sepia toning and the file opens with the sepia toning. Also remember original email i do not have this issue when opening a B&W file in Autodesk Sketchbook Pro which makes me believe it is a Photoshop issue.
kurt
From: "Noel Carboni " <[email protected]>
To: " ooncho " < kurtpen @comcast.net>
Sent: Sunday, February 26, 2012 11:56:05 AM
Subject: All of My B&W pics have a unwanted sepia tone???
Re: All of My B&W pics have a unwanted sepia tone???
created by Noel Carboni in Photoshop General Discussion - View the full discussion
In short, your monitor profile is bad or at least doesn't even closely match the output characteristics of your monitor. This profile is associated with the monitor at the operating system level.
What operating system do you have?
-Noel
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link .
Start a new discussion in Photoshop General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http ://forums.adobe.com/message/2936746#2936746 . -
Colorsync : sepia tone versus sepia image correction
Hello,
When using Colorsync, you can change an image to *"sepia tone"* using a predefined profile. But there's also a "Sepia" slider when you click on the *"image correction"* button. However, they give a totally different result...
The first one gives a result that looks more or less like the ones being taken immediately from a camera with the sepia filter selected, while the second one (from the "image correction" slider) seems totally wrong. How come?
If I do the conversion to sepia in (e.g.) Picasa or Photoshop, they seem to look like the (correct?) "sepia tone"-version. But on the other side, (e.g.) Pixelmator and Seashore give the (wrong?) "image correction"-version...
Now, I'm interpreting them as "correct" and "wrong", but actually, I can't image that (e.g.) Pixelmator would do a "totally wrong" sepia conversion — so that brings me to this: *what's the difference between these two sepia-versions*?
I don't have enough knowledge about this, so I hope someone can help me out here...
-- Many thanks for you reply,
Franky BackeljauwI tried using the algorithm, but it turned my image
purple rather than brow. :(The Delphi code has bug.
A simpler version does work:
import javax.swing.*;
import java.awt.*;
import java.awt.image.*;
public class Sepia{
public static void main(String[] args){
ImageIcon iic = new ImageIcon("Pic6.jpg");
Image img = iic.getImage();
ImageFilter filter = new SepiaFilter();
img = Toolkit.getDefaultToolkit().createImage
(new FilteredImageSource(img.getSource(), filter));
iic.setImage(img);
JLabel lab = new JLabel(iic);
JOptionPane.showMessageDialog(null, lab);
System.exit(0);
class SepiaFilter extends RGBImageFilter {
int depth;
public SepiaFilter(int d){
if (d < 0){
d = 0;
depth = d;
canFilterIndexColorModel = true;
public SepiaFilter(){
this(20);
public int filterRGB(int x, int y, int rgb){
int r, g, b, gry;
Color c = new Color(rgb);
r = c.getRed();
g = c.getGreen();
b = c.getBlue();
gry = (r + g + b) / 3;
r = g = b = gry;
r = r + (depth * 2);
g = g + depth;
if (r > 255){
r = 255;
if (g > 255){
g = 255;
c = new Color(r, g, b);
return c.getRGB();
} -
I've seen once how to convert to B&W and Sepia, but can't find it now. Need tips. Thank you
In the adjustments panel you have a monochrome mixer to convert to BW and there is also a Sepia Tone Adjustment, for my taste a value of 0.3/0.4 looks best.
-
B9180 problem b&w prints gets sepia tone
i've got a bit odd problem now suddenly after sometime using this great printer my black and white (b&w) prints gets a sepia (light brown/yellow) tone when printing it with just grayscale with grayink only
software when printing, Aperture 2 and ImageNest RIP 2
any idea what's wrong?
cheers/TonyHi Tony,
The only thing I can think of is that you may be converting to your output profile prior to printing. BW printing is a non icc process and ICC color management can cause what you describe.
If you are not doing this then it is either a problem in your printer of your print driver settings. I use both Aperature and ImageNest myself and haven't had any issues.
Hope this was a help. ImageNest has an article on it at: It has the epson settings but it is the same for HP. I called and asked: http://www.bluecubit.com/adv-epson-bw-mode.php -
In the library view, lightroom starts changing color photos to b & W with a sepia tone
I have a mac mac and lightroom 6. The changes occur one picture at a time without my doing anything. How to stope this? Is there any way to reverse the changes made to a group of files?
Sounds like you have a preset being assigned to the group either manually or during the import process.
Check the history panel in the Develop module to see if a preset got assigned.
If yes, you need to verify how it got assigned and yes it can be undone. -
In Photoshop CS4 extended, trying to apply sepia filter to a photo, need help
I've been re-watching the videos on smart filters, and also I remember having seen one video (either in NAPP or here or on Lynda.com) where one can make a nice sepia tone color for a photo. I see the option in the filter menu, at the bottom of the layers panel, and one can choose sepia, and then a layer appears, called photo filter 1, above my "smart object" image, but then I don't see any change. What do I do next, to get the sepia effect applied over my original (now smart) image? Can someone take me from there, or give me a reference to the training video that covers this?
Thanks in advance.Here's two other ways when in cmyk, but the settings below may need some
tweaking depending on which cmyk profile your using and your idea of what sepia
should look like.
For these to work, you'll have to desaturate the layer: To retain the smart
object, you could double click on the smart object icon, then in the image
that opens, go to Image>Adjustments>Desaturate and then save. This will
update the smart object in your original image.
1. Add a Color fill adjustment layer and set the layer blending mode to either overlay, softlight
or color.
2. Use a color balance adjustment layer and only adjust the Midtones.
MTSTUNER -
Sepia color though the whole catalog (LR 3.6)
All of my photos now have a sepia tone where they used to show white. In the develop module the white in the histogram is also now sepia. I have tried restoring a backup and it has the same problem for all 15000 photos. Any ideas on how I can fix this?
In B&W all colors convert except white that stays in this brownish orangeYou don't "play with the profiles" - you use the correct one; the one that accurately describes your display.
If the one you had was broken, as it apparently was here, you can use sRGB as a temporary solution until you can make a good profile with a calibrator. sRGB isn't the correct profile, it's just better than a broken one. Any other profile you might find there will be more wrong.
Just so it's clear... -
Photoshop images showing as sepia in lightroom help me please
hi i'm working on black and white medium format images i've cropped and added text in photoshop cc but when i import to lightroom they have a sepia tone can anyone help with this thank you
You have not provided any system info or other details like what image files, so no, nobody can really help you. The blanket answer would be that you are not using color management, but that's pretty much all. Ask in the LR/ PS forums and provide the required details.
Mylenium -
Does the photos app let you use the sepia option?
Did Apple take away the sepia tone for editing pictures? If not, how do I find it? I have looked everywhere.
It appears so. I've tried to simulate it with a variety of edits with no success. Tell Apple what additional features you want in Photos or features returned via https://www.apple.com/feedback/photos.html
-
Help me format my external drive
Ok here is my problem, the drive got corrupted (my fault, the drive was getting scanned and it lost power) now i hade hopes of restoring it, but that fell through (nothing important was on it) so now i try to format the drive and i get an input and out put error, then i try to partion it, but that also fails.....so then i connected it to my windows and to access the drive i have to go through disk manager and the partion and the format fails...this also happens to another drive of mine that was corrupted form another issue......
i have giiven u every piece of inforamtion i have, please help me, also i want all information on the enclousre, and azny update drivers for it, i hope i have given enough information
Here is the EXACT drive in question.
http://www.geeks.com/details.asp?invtid=AP35-C&cat=CAS
Here is the EXACT hard drive i use.
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=932&p_created=1049408910&p_sid=N_BmnJ5i&p_lva=&p_sp=cF9zcmNoPTEm cF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MiZwX3Byb2RzPSZwX2NhdHM9JnBfcHY9JnBf Y3Y9JnBfc2VhcmNoX3R5cGU9c2VhcmNoX2ZubCZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PXdkMjUwMGxi &p_li=&ptopview=1
here is all the information on my compouter
Cingullar
4/26/05 11:33 PM
Hardware:
Hardware Overview:
Machine Name: PowerBook G4 15"
Machine Model: PowerBook5,6
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.67 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.1f1
Serial Number: YD5220XLRG4
Network:
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:88:bf:e8
Media Options:
Media Subtype: none
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 192.168.2.6
IPv4:
Addresses: 192.168.2.6
Configuration Method: DHCP
Interface Name: en1
Router: 192.168.2.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Default Zone: *
Interface Name: en1
Network ID: 65307
Node ID: 151
DNS:
Domain Name: Belkin
Server Addresses: 192.168.2.1
DHCP Server Responses:
Domain Name: Belkin
Domain Name Servers: 192.168.2.1
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.2.1
Server Identifier: 192.168.2.1
Subnet Mask: 255.255.255.0
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: No
HTTP Proxy Enabled: No
HTTP Proxy Port: 8999
HTTP Proxy Server: 127.0.0.1
HTTPS Proxy Enabled: No
HTTPS Proxy Port: 8999
HTTPS Proxy Server: 127.0.0.1
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:9c:3d:aa
Media Options:
Media Subtype: autoselect
Internal Modem:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:ff:fe:88:bf:e8
Media Options: Full Duplex
Media Subtype: autoselect
VPN (L2TP):
Type: PPP (L2TP)
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Software:
System Software Overview:
System Version: Mac OS X 10.4.6 (8I127)
Kernel Version: Darwin 8.6.0
Boot Volume: Steven
Computer Name: Cingullar
User Name: Steven Feldman (steven)
ATA:
ATA Bus:
MATSHITADVD-R UJ-845E:
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
ATA Bus:
FUJITSU MHT2080AH:
Capacity: 74.53 GB
Model: FUJITSU MHT2080AH
Revision: 81EC
Serial Number: NP0PT552APF0
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Steven:
Capacity: 74.41 GB
Available: 3.25 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /
Audio (Built In):
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Internal Microphone:
Controls: Left, Right
Playthrough: Yes
PluginID: TAS
Line Level Input:
Controls: Left, Right
Playthrough: Yes
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Left, Right
PluginID: TAS
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth:
Apple Bluetooth Software Version: 1.7.3f4
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Pictures
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents/Shared
Requires Authentication: Yes
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
CingularUpdator:
Name: CingularUpdator
Address: 00-02-ee-e2-f3-ae
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: Yes
Connected: No
MotorolaPhone:
Name: MotorolaPhone
Address: 00-14-9a-79-ad-51
Type: Cellular Phone
Services: Voice Gateway, Hands-Free voice gateway, OBEX Object Push, OBEX File Transfer, Dial-up networking Gateway
Paired: Yes
Favorite: Yes
Connected: No
CingularUpdator:
Name: CingularUpdator
Address: 00-02-ee-e2-eb-ee
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: No
Connected: No
Nokia6820Greg:
Name: Nokia6820Greg
Address: 00-02-ee-e2-58-0b
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: No
Connected: No
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: Yes
Outgoing Serial Ports:
Serial Port 1:
Address: 00-02-EE-E2-EB-EE
Name: CingularUpdator-1
RFCOMM Channel: 15
Requires Authentication: No
Serial Port 2:
Address: 00-02-EE-E2-EB-EE
Name: CingularUpdator-2
RFCOMM Channel: 1
Requires Authentication: No
Serial Port 3:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 4/26/05 11:06 PM
Result: Passed
Apple Hardware Test:
Last Run: 4/10/06 3:26 PM
Version: 2.5 PB
Test Suite: Extended Test
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-845E:
Firmware Revision: DMP2
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Graphics/Displays:
ATI Mobility Radeon 9700:
Chipset Model: ATY,RV360M11
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4e50
Revision ID: 0x0000
ROM Revision: 113-xxxxx-145
Displays:
Color LCD:
Display Type: LCD
Resolution: 1280 x 854
Depth: 32-bit Color
Built-In: Yes
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
Memory:
SODIMM0/J25LOWER:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
SODIMM1/J25UPPER:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
PCI Cards:
TXN,PCIXXXX-00:
Name: cardbus
Type: cardbus
Bus: PCI
Slot: PC Card
Vendor ID: 0x104c
Device ID: 0xac56
Revision ID: 0x0000
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Dynamic Power Step: No
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3854
Remaining Capacity (mAh): 1464
Amperage (mA): 2433
Voltage (mV): 12116
Cycle Count: 158
AC Charger Information:
AC Charger (Watts): 65
Connected: Yes
Charging: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
Printers:
DESKJET 3820:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://HEWLETT-PACKARD/DESKJET 3820?serial=CN28J1B11118
PPD: hp deskjet 3820
PPD File Version: 1.0
PostScript Version: (3011.104) 0
DESKJET 3820:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://HEWLETT-PACKARD/DESKJET 3820?serial=CN28J1B11118
PPD: hp deskjet 3820
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5550:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5550?serial=MY37I1S1SB2L
PPD: hp deskjet 5550
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5550:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5550?serial=MY37I1S1SB2L
PPD: hp deskjet 5550
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5600:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: Yes
URI: usb://hp/deskjet 5600?serial=MY48A4N3SS79
PPD: hp deskjet 5600
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5600:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5600?serial=MY48A4N3SS79
PPD: hp deskjet 5600
PPD File Version: 1.0
PostScript Version: (3011.104) 0
hppsc131:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: smb://Home/Stevenpc/hppsc131
PPD: Generic PostScript Printer
PPD File Version: 1.0
PostScript Version: (2000.0) 1
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x5b
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x003f
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x1a
Bluetooth HCI:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Internal Keyboard/Trackpad:
Version: 0.28
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer
Product ID: 0x020e
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x1b
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x3b
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)
Current Wireless Network: belkin54g
Wireless Channel: 11
Firewall:
Apple Remote Desktop:
Policy: Denied
TCP Ports: 3283, 5900
iPhoto Bonjour Sharing:
Policy: Denied
TCP Ports: 8770
Remote Login - SSH:
Policy: Denied
TCP Ports: 22
diablo II:
Policy: Allowed
TCP Ports: 6112
UDP Ports: 6112
Personal File Sharing:
Policy: Denied
TCP Ports: 548, 427
Network Time:
Policy: Allowed
UDP Ports: 123
Adobe Version Cue CS2:
Policy: Allowed
TCP Ports: 3703, 427, 50800
iTunes Music Sharing:
Policy: Allowed
TCP Ports: 3689
FTP Access:
Policy: Denied
TCP Ports: 21
iChat Bonjour:
Policy: Denied
TCP Ports: 5297, 5298
Personal Web Sharing:
Policy: Denied
TCP Ports: 80, 427, 443
Remote Apple Events:
Policy: Denied
TCP Ports: 3031
d2:
Policy: Allowed
TCP Ports: 6112
UDP Ports: 6112
Windows Sharing:
Policy: Denied
TCP Ports: 139
Printer Sharing:
Policy: Denied
TCP Ports: 631, 515
Locations:
School EtherNet:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: sfh-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: sfh-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: sfh-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: sfh-px1
Auto Discovery Enabled: 0
SOCKS Proxy Enabled: 1
SOCKS Proxy Port: 8002
SOCKS Proxy Server: sfh-px1
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exceptions List: Localhost, 127.0.0.1, .*.
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: Sfh-fs1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: Sfh-fs1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: Sfh-fs1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: Sfh-fs1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: Sfh-fs1
SOCKS Proxy Enabled: 0
SOCKS Proxy Port: 8002
SOCKS Proxy Server: Sfh-fs1
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exceptions List: Localhost, 127.0.0.1, .*.
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: Sfh-fs1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: Sfh-fs1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: Sfh-fs1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: Sfh-fs1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: Sfh-fs1
Dads House:
Active Location: No
Services:
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 0
Auto Discovery Enabled: 0
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Ethernet:
Media Subtype: autoselect
MTU: 1500
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Location (1/4/06 4:15 PM):
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Moms Wireless:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (L2TP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
Automactic:
Active Location: Yes
Services:
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Ethernet:
Media Subtype: autoselect
MTU: 1500
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 0
HTTP Proxy Enabled: 0
HTTP Proxy Port: 8999
HTTP Proxy Server: 127.0.0.1
HTTPS Proxy Enabled: 0
HTTPS Proxy Port: 8999
HTTPS Proxy Server: 127.0.0.1
Auto Discovery Enabled: 0
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Authorization Name: Nighteaater537
Authorization Password: <002d003d 002d003d 002d003d >
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Remote Address: 772-546-3768
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 1
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 180
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 1
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (L2TP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
MacTOPc:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (PPTP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
CCP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
School:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Proxy Enabled: 1
FTP Passive Mode: 0
FTP Proxy Port: 8002
FTP Proxy Server: sfh-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: sfh-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: sfh-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: sfh-px1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 0
FTP Proxy Port: 8002
FTP Proxy Server: ic-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: ic-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: ic-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: ic-px1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: ic-px1
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Modems:
Modem Information:
Modem Model: Jump
Interface Type: I2S
Modulation: V.92
Hardware Version: Version 1.0
Driver: MotorolaSM56K.kext (v1.3.3)
Country: B5 (United States, Latin America)
Applications:
Acrobat Reader 5:
Version: 5.0.5
Last Modified: 10/19/05 10:31 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Acrobat Reader 5.0
Acrobat Distiller 7.0:
Version: 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Acrobat Distiller™ 7.0.7, 1984-2006 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app
Acrobat Uninstaller:
Version: Acrobat Uninstaller version 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Acrobat Uninstaller version 7.0.7, Copyright © 2005 by Adobe Systems, Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Acrobat Uninstaller.app
Adobe Acrobat 7.0 Professional:
Version: 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Adobe® Acrobat® 7.0.7, ©1984-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Adobe Acrobat 7.0 Professional.app
Bridge:
Version: 1.0.0.545
Last Modified: 11/11/05 11:58 AM
Kind: PowerPC
Get Info String: 1.0.0.545 (93460), Copyright 2003-2005, Adobe
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Bridge/Bridge.app
Adobe GoLive CS2:
Version: 8.0
Last Modified: 11/11/05 12:31 PM
Kind: PowerPC
Get Info String: 8.0, Copyright © 1997-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe GoLive CS2/Adobe GoLive CS2.app
Adobe Help Center:
Version: Adobe Help Center 1.0.0.793
Last Modified: 11/11/05 11:58 AM
Kind: PowerPC
Get Info String: Adobe Help Center 1.0.0.793 (C) 2005 Adobe Systems, Inc. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Help Center.app
Illustrator:
Version: 12.0.0
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Get Info String: 12.0.0, Copyright © 1987-2005 Adobe Systems Inc. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Adobe Illustrator.app
Demonstrator:
Version: 2.0
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Get Info String: 1.0
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Demonstrator/Demonstrator.app
Analyze Documents:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
Make Calendar:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
Collect for Output:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
Contact Sheets:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
Dataset Batch PDF from Text:
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Datasets.localized/Dataset Batch PDF from Text.app
Export Flash Animation:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
Web Gallery:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
Adobe InDesign CS2:
Version: 4.0.0.421
Last Modified: 11/11/05 12:07 PM
Kind: PowerPC
Get Info String: 4.0, Copyright 2000-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe InDesign CS2/Adobe InDesign CS2.app
Adobe ImageReady CS2:
Version: 9.0x196
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 9.0x196, Copyright © 1998-2005 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Adobe ImageReady CS2.app
Adobe Photoshop CS2:
Version: 9.0 (9.0x196)
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 9.0 (9.0x196), Copyright ©1990-2005 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Adobe Photoshop CS2.app
Constrain 350, Make JPG 30:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain 350, Make JPG 30.exe
Constrain to 200x200 pixels:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain to 200x200 pixels.exe
Constrain to 64X64 pixels:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain to 64X64 pixels.exe
Make Button:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make Button.exe
Make GIF (128 colors):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (128 colors).exe
Make GIF (32, no dither):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (32, no dither).exe
Make GIF (64 colors):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (64 colors).exe
Make JPEG (quality 10):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 10).exe
Make JPEG (quality 30):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 30).exe
Make JPEG (quality 60):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 60).exe
Metal Slide Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Metal Slide Thumbnail.exe
Multi-Size Save:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Multi-Size Save.exe
Rounded Rect Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Rounded Rect Thumbnail.exe
Slide Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Slide Thumbnail.exe
Unsharp Mask:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Unsharp Mask.exe
Aged Photo:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Aged Photo.exe
Conditional Mode Change:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Conditional Mode Change.exe
Constrain to 300 pixels:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Constrain to 300 pixels.exe
Constrain to 64 pixels:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Constrain to 64 pixels.exe
Drop Shadow Frame:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Drop Shadow Frame.exe
Make Button:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Make Button.exe
Make Sepia Tone:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Make Sepia Tone.exe
Save As JPEG Medium:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Save As JPEG Medium.exe
Save As Photoshop PDF:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Save As Photoshop PDF.exe
VersionCueCS2:
Version: 2.0
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 2.0, Copyright ©2001-2004 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/bin/VersionCueCS2.app
VersionCueCS2Status:
Version: 1.0.0
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/bin/VersionCueCS2Status.app
VC2Native:
Version: 2.0
Last Modified: 11/11/05 12:02 PM
Get Info String: 2.0.0, © 2003-2004 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/plugins/com.adobe.versioncue.nativecomm_2.0.0/res/macosx/VC2Native.app
Uninstall Version Cue CS2:
Version: 0.1
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/Uninstall Version Cue CS2.app
DJ-1800 2.2.1:
Version: 2.2.1
Last Modified: 10/31/05 5:57 PM
Kind: PowerPC
Get Info String:Alot of information...
First observation, is that your internal hard disk has too much on it - on an
80gb internal hard disk, you want to keep 10% available for system usage,
which would be 8gb vs the 3 and change gb available shown in your
posted information above.
See if I got this right...you have an external powered enclosure with a WD
250gb ultra ata hard drive that has worked before on your PB. Snap,
crackle, pop, power goes, and the HD is corrupted. Your PowerBook,
however, still recognizes the external HD as a device, right? You tried
hooking into a Windows-based system, and couldn't access anything.
Assuming your PB recognizes it as a hard drive, have you brought up the
Apple disk utility and tried to repair the drive (select external hard drive
on left side of disk utility, then first aid tab, repair disk)? Results?
Maybe you are looking for
-
I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?
-
Right now I have a 2 text variables that display the 0Version and the fiscal/period as a column heading on one line. Below that is the key figure amounts. Is there any way to have the following: 0Version on one line, Fiscal/Period on the next line ,
-
Assign One Position to More than one Employee Subgroup
Dear Gurus, Please is it possible to assign one position to more than one employee subgroup? Secondly, I have a case here where employees in a particular cadre called Junior staff have different leave quota based on no particular criteria. This means
-
Hello, I have been using photoshop CS 5 for about 6 months now, and have yet to have a problem with it (except one, but I wont get into that). Until reacently it has been running very smoothly. One day I was making a few things (400x300) so not that
-
Interpret frames limited to 99fps?
Finally upgraded to CS4 and I see the interpret frames is still limited to 99fps?