Seq editor E box?

Very simple question but I recently installed Test stand 2013 and every time I run a sequence I get this dialog box in the corner. Seq Editor E(lapsed timer?) cant resize cant close and generally its in the way. How do I turn this off?

Looking at the bottom of the Sequence Editor window, it looks like the model is called "TestStandModel.seq", which lends credence to the idea that this is a custom model (we do not provide a built-in model with that name). Also, it looks like the name of the dialog box is being cut off--I bet if you resize it with your mouse, you'll see a more complete name for the box. It looks like some kind of execution monitor window.
This is almost certainly a process model customization, and could likely be disabled by editing the process model to skip or remove the steps which display the dialog. If you'd like to look through the process model and try to find the relevant code, you can just double-click the text at the bottom that says "TestStandModel.seq" to open the process model.
Also, if you obtained the model from another developer at your company, it might be worth talking to that person to get more insight on why the dialog exists or how you might disable it for your testing.
Daniel E.
TestStand Product Support Engineer
National Instruments

Similar Messages

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

Suppress default editor dialog box

Is there any way to suppress default editor dialog box that comes at 1st launch of Dreamweaver CS5. I need to automate some stuff and cant figure out how to handle it.
I cannot attach screenshot of this dialog box here, but it says that "Dreamweaver CS5 will set itself as Default editor for the following file types:" and gives option as jsp, asp, css etc.
Any help would be appreciated.

wsalopek wrote:
Suffice it to say for the purpose of this thread that when I did the ICS "upgrade" to my Droid 4, nothing but trouble followed until I did a hard reset and had to reinstall/customize everything...lots and lots of frustration and lost time, including a whole day when my phone was not usable at all (slow/rebooting on it's own/battery running hot/high cpu usage/battery dying in 90 minutes)...and I an NOT the only one.
Anyway, my wife has a Droid 4 as well, and she is being pestered by the dialog box that keeps asking her if she wants to do the upgrade. We do NOT want that "upgrade" installed on my wife's phone, but dealing with that dialog box is getting very tiresome.
Anyone know how to suppress that dialog box so it stops popping up?
Thanks...
There is no way to do this that meets the ToS on this board (as Verizon wants everyone to be at the same software level for a particular phone model). Search forums other than this one and the Motorola one for the information you need.

Dialog Boxes in TestStand Seq Editor Scroll

I am relatively new to TestStand and I have a question. I noticed that the drop-down dialog boxes in TestStand only drop one item and then force you to scroll through all the options using tiny arrows. Is there any way to make these dialog boxes drop down the way they would in a normal program (show all options). This is worse than Microsoft's "personalized menus" option.
Thanks,
Toby

Toby,
I am running Windows XP on my end, and the combo boxes work as expected. When you click the arrow, all of the options are listed. I'm sorry again for the inconvenience!
Matt S
National Instruments
Applications Engineer
Attachments:
XP.jpg ‏55 KB

In the expression editor dialog box my TAB key doesn't function correctly

This is bizarre behavior that seems to have started recently.
In Visual Studio 2012, an SSRS project, any expression editor dialog:
The tab key doesn't work right.
Open the expression editor and:
* I see a blinking cursor and I can type in the expression box.
* If I hit the tab key, the cursor disappears and I cannot type. I appear to lose focus in the editor but focus doesn't appear to go anywhere else in the dialog box.
* If I hit the tab key a 2nd time, the cursor is still gone and I cannot type.
* If I hit the tab key a 3rd time, I can finally type again and note that I am now
3 tabstops in. In other words it seems like the tabs were working but I lost the ability to type anything until I "tab" 3 magical times.
I can work around this by hitting tab key then grabbing the mouse and clicking where the cursor SHOULD be which returns focus to the text area.
Hopefully this image helps clarify:
Anybody know what is wrong?
Microsoft Visual Studio Professional 2012
Version 11.0.61030.00 Update 4
Microsoft .NET Framework
Version 4.5.50709
Installed Version: Professional
LightSwitch for Visual Studio 2012 04938-004-0034007-02367
Microsoft LightSwitch for Visual Studio 2012
Office Developer Tools 04938-004-0034007-02367
Microsoft Office Developer Tools
Team Explorer for Visual Studio 2012 04938-004-0034007-02367
Microsoft Team Explorer for Visual Studio 2012
Visual Basic 2012 04938-004-0034007-02367
Microsoft Visual Basic 2012
Visual C# 2012 04938-004-0034007-02367
Microsoft Visual C# 2012
Visual C++ 2012 04938-004-0034007-02367
Microsoft Visual C++ 2012
Visual F# 2012 04938-004-0034007-02367
Microsoft Visual F# 2012
Visual Studio 2012 Code Analysis Spell Checker 04938-004-0034007-02367
Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
Visual Studio 2012 SharePoint Developer Tools 04938-004-0034007-02367
Microsoft Visual Studio 2012 SharePoint Developer Tools
ASP.NET and Web Tools 2012.3.41009
Microsoft Web Developer Tools contains the following components:
Support for creating and opening ASP.NET web projects
Browser Link: A communication channel between Visual Studio and browsers
Editor extensions for HTML, CSS, and JavaScript
Page Inspector: Inspection tool for ASP.NET web projects
Scaffolding: A framework for building and running code generators
Server Explorer extensions for Windows Azure Web Sites
Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Windows Azure
Color Theme Designer 1.0
Designer for creating new color themes
NuGet Package Manager 2.8.50126.400
NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
PreEmptive Analytics Visualizer 1.0
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 11.0.3369.0
SQL Server Data Tools 11.1.40706.0
Microsoft SQL Server Data Tools
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 11.0.3369.0
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3369.0
BIDSHelper
BIDS Helper 2012 - An add-in to extend SQL Server Data Tools - Business Intelligence (SSDTBI formerly BI Development Studio)
(c) 2014 Version 1.6.6.0
http://www.codeplex.com/bidshelper
SQL Prompt 6
For more information about SQL Prompt, see the Red Gate website at
http://www.red-gate.com
For customer support, call 1-866-733-4283.
Copyright © 2006–2009 Red Gate Software Ltd

Hi Bostaevski,
Thank you for posting in MSDN forum.
According to your description, as you said that the cursor disappears and cannot type issue. It seems that the issue may be not Visual Studio the VS IDE issue.
In addition, I find a similar thread about the
Expression Editor Cursor Issue,
please see:
http://www.beta.microsoft.com/VisualStudio/feedbackdetail/view/780682/vs-2012-rdlc-expression-editor-cursor-issue#.
Therefore, I suggest you could also try to press alt with left and right arrow keys and check if it is works fine.
Thnank for your understanding!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Font in editor field (box)

Well, why not set monospace font for editor box (like in wiki)?
Last edited by eruditorum (2013-02-04 03:41:03)

Is this about the forums?

Opening Sample editor = White box!

Hello,
I dont do much audio work, but today I wanted to edit a sample in the sample editor. When I tried to open said editor, a blank white window appeared in its place, with a blue scroll blob on the upper left corner (which does nothing) and the typical 3 window-sizing dots above it.
This is where it gets odd. After this current song is open, opening new templates and/or creating a blank template result in the same blank window when trying to open the sample editor. However, if I quit Logic an THEN create a new project, the sample editor opens fine. It even opens fine in all my autoloads/templates that previously did not work! However, once I got back to this song, this problem occurs again.
Any idea whats causing these issues? What is my best options for rectifying the situation both now (currently in the middle of a project) and in the future? Should rebuild my entire template from scratch? I just recently did this, but may have started off an old template.
Thanks in advance for your help!

Actually, the white window fix and the Quad fix are the one/two reasons I'd consider 7.2.x.
You say you never have white window & dropout problems. With maybe one exception, I've never had the dropout problem (are you referring to SIDS?). The white window thing started when I ramped up my sampler instrument usage dramatically. So my theory, which is mine, which is my theory which is mine (I'm talking about my theory, which, by the way, is mine) is that the graphics display start to go south when Logic is maxing out on RAM.
Or it could be something else, which is another one of my theories.

Current SPL in arrange ever linked to position in Seq. Editor? Save us time

I am looking in the arrange menu, and say that the SPL position marker is on 1min and 4 seconds in it's SMPTE time. Now when I double click on that track, the Seq. editor opens, and it doesn't have the SPL where it was on its Arrange menu location. (It's at the beggining of the track) Is there a way to have the SPL be in the same position when Seq. editor is open?
Thanks guys!

This is what this issue means to me.......The SPL in arrange menu HAS NO CONNECTION for reference to the Start point and SPL within the Seq. editor????? EVEN if CATCH and Link are initiated....doesn't make sense to me
-Mike

How do I add a 2nd editor to dreamweaver's list of "Open With"?

When in Dreamweaver I sometimes want to open some source code using an external editor. Dreamweaver "Open With" functionality allows dreamweaver or a lookup of an editor. I don't see any way to set multiple choices and still have an optional lookup a program to open it with. I would like to create the following.
Dreamweaver
ExternalEditor
Look Up Program to Open with.
I have discovered I am getting tired of looking up the same editor many times and I would like the editor to remain on the list. Is this possible with DW(CS4) 10.0 Build 4117.
Thanks. Andy

In DW from the menu bar...
Edit...Preferences...
Select "File Types / Editors" from Category panel on left
In "External Code Editor" text box, enter the full path of the text editor program you want to use (or click "Browse..." to browse to it).
I've found this a little flaky, though. It does show the External editor in "Open With..." for html files, but not, say, for .txt files, even after I removed it from the "Open in Code View" list (on the same page). I had to add the extension to the configuration panel below to get it to work with text files. "Open With..." shows Dreamweaver if you want to use code view.

Stopping cell editing in a JTable using a JComboBox editor w/ AutoComplete

Hi there! Me again with more questions!
I'm trying to figure out the finer parts of JTable navigation and editing controls. It's getting a bit confusing. The main problem I'm trying to solve is how to make a JTable using a combo box editor stop editing by hitting the 'enter' key in the same fashion as a JTextField editor. This is no regular DefaultCellEditor though -- it's one that uses the SwingX AutoCompleteDecorator. I have an SSCCE that demonstrates the issue:
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.AbstractCellEditor;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JTable;
import javax.swing.WindowConstants;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.TableCellEditor;
import javax.swing.table.TableModel;
import org.jdesktop.swingx.autocomplete.AutoCompleteDecorator;
public class AutoCompleteCellEditorTest extends JFrame {
public AutoCompleteCellEditorTest() {
    JTable table = new JTable();
    Object[] items = {"A", "B", "C", "D"};
    TableModel tableModel = new DefaultTableModel(2, 2);
    table.setModel(tableModel);
    table.getColumnModel().getColumn(0).setCellEditor(new ComboCellEditor(items));
    getContentPane().add(table);
    setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
    pack();
private class ComboCellEditor extends AbstractCellEditor implements TableCellEditor {
    private JComboBox comboBox;
    public ComboCellEditor(Object[] items) {
      this.comboBox = new JComboBox(items);
      AutoCompleteDecorator.decorate(this.comboBox);
    public Object getCellEditorValue() {
      return this.comboBox.getSelectedItem();
    public Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected, int row, int column) {
      comboBox.setSelectedItem(value);
      return comboBox;
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new AutoCompleteCellEditorTest().setVisible(true);
}Problem 1: Starting to 'type' into the AutoCompleteDecorate combo box doesn't cause it to start editing. You have to hit F2, it would appear. I've also noticed this behaviour with other JComboBox editors. Ideally that would be fixed too. Not sure how to do this one.
Problem 2: After editing has started (say, with the F2 key), you may start typing. If you type one of A, B, C, or D, the item appears. That's all good. Then you try to 'complete' the edit by hitting the 'enter' key... and nothing happens. The 'tab' key works, but it puts you to the next cell. I would like to make the 'enter' key stop editing, and stay in the current cell.
I found some stuff online suggesting you take the input map of the table and set the Enter key so that it does the same thing as tab. Even though that's not exactly what I desired (I wanted the same cell to be active), it didn't work anyway.
I also tried setting a property on the JComboBox that says that it's a table cell editor combo box (just like the DefaultCellEditor), but that didn't work either. I think the reason that fails is because the AutoCompleteDecorator sets isEditable to true, and that seems to stop the enter key from doing anything.
After tracing endless paths through processKeyBindings calls, I'm not sure I'm any closer to a solution. I feel like this should be a fairly straightforward thing but I'm having a fair amount of difficulty with it.
Thanks for any direction you can provide!

Hi Jeanette,
Thanks for your advice. I looked again at the DefaultCellEditor. You are correct that I am not firing messages for fireEditingStopped() and fireEditingCancelled(). Initially I had copied the behaviour from DefaultCellEditor but had trimmed it out. I assumed that since I was extending AbstractCellEditor and it has them implemented correctly that I was OK. But I guess that's not the case! The problem I'm having with implementing the Enter key stopping the editing is that:
1) The DefaultCellEditor stops cell editing on any actionPerformed. Based on my tests, actionPerformed gets called whenever a single key gets pressed. I don't want to end the editing on the AutoCompleteDecorated box immediately -- I'd like to wait until the user is happy with his or her selection and has hit 'Enter' before ending cell editing. Thus, ending cell editing within the actionPerformed listener on the JComboBox (or JXComboBox, as I've made it now) will not work. As soon as you type a single key, if it is valid, the editing ends immediately.
2) I tried to add a key listener to the combo box to pick up on the 'Enter' key and end the editing there. However, it appears that the combo box does not receive the key strokes. I guess they're going to the AutoCompleteDecorator and being consumed there so the combo box does not receive them. If I could pick up on the 'Enter' key there, then that would work too.
I did more reading about input maps and action maps last night. Although informative, I'm not sure how far it got me with this problem because if the text field in the AutoCompleteDecorator takes the keystroke, I'm not sure how I'm going to find out about it in the combo box.
By the way, when you said 'They are fixed... in a recent version of SwingX', does that mean 1.6.2? That's what I'm using.
Thanks!
P.S. - Maybe I should create a new question for this? I wanted to mark your answer as helpful but I already closed the thread by marking the answer to the first part as correct. Sorry!
Edited by: aardvarkk on Jan 27, 2011 7:41 AM - Added SwingX versioning question.

Script editor ICM 6 - "...don't own the script lock"

I'm running UCCE 6 (ICM 6.0) and I just installed the ICM Internet Script Editor on my computer.
When I try to save changes to a script I get the following error:
"You can not update the script because you don't own the script lock"
When I open the script locks, under file/script locks, it shows that I have it open.
We currently VNC to the HDS/AW in order to create/update scripts.
thanks

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
I don’t know what version of ICM you're running but in my case (ver 6) it was a security setting for my user account:
In Configuration Manager under User List, I went to my account and I unchecked the “Read only” check box and checked the “Webview and Script Editor only” box.

Why wont my photoshop editor work?

I recently bought and installed Premiere Elements 11 onto my MacBook. When I try to open the editor, a box comes up that says I can try the trial or purchase. i have already purchased and downloaded, so what's going on?

plummieo
Activation and serial number issues need to be addressed by Adobe directly.
Please use the following link to get to Adobe Chat who should quickly and effective define and resolve your issue.
Once the link opens, click on the "I still need help" button to get the Adobe Chat pop up.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues
Thanks.
ATR

Feature request - disabled auto-select in function editor

PLEASE add a setting to disable this. It is very annoying.

Hi Ben,
There are a few enhancements that could be made to improve the productivity of heavy script builders:
1) Reinstate the "Advanced Editor" button on the right side of the formula bar. It's tiring having to click the View tab, click the editor button, and then flip back to the view tab to apply and close (or use the pull-down menu on the left). Leave the View
tab as is - just put the button back as a shortcut to open the editor dialog box. Thanks!
2) When you create a custom function, the function tab appears...which means that PQ knows that it's working with a function. It would be useful if, in addition to creating the function tab, PQ unchecks the load to workbook check box. Loading a
custom function to the workbook serves no practical purpose. The problem is that I invariably forget to uncheck the box after creating a new custom function, and have to re-enter the function, uncheck the box, then delete the now useless worksheet. Phew!
3) Would be really nice if there was a window that allowed the input of test function arguments, and displayed the results of intermediate expressions calculated eagerly. Such functionality would be a huge boost for troubleshooting complex custom functions.

Pattern or beat editor for drums

How do I use Ultrabeat's pattern editor, but use BFD as the software instrument? It doesn't need to be Ultrabeat, but I'd like to be able to have a pattern editor or beat editor as the interface, but use BFD for the sounds.
I can sorta do this with BFD as the instrument and use the Hyper Editor, but I can't find any way to save Hyper Sets.
I've seen stand alone pattern editors (Doggie Box) and VST plugins (FL Studio), but I can't figure out how to use them.
Any help is greatly appreciated.

The Hyper editor is my tool of choice for drum programming, as the key parameters it displays are timing and velocity for each note, unlike the matrix where it's two principle parameters are timing and length, which you mostly don't care about for drum programming.
Also, you can have independent display quantisation per note, and the drum voices are named, and it has other advantages too.

Field Tree Dialog box - Detached

Here's my problem, I accidently clicked and dragged the field tree dialog box in the editor and detached it from the main editor dialog box and now it just kind of floats out there. I work with two monitors and now when I open the editor, I get the editor dialog box on one screen and my field tree dialog box on the other. I know that I have done this before and never found a solution. Luckily we had an upgrade to Crystal and the reinstall fixed my problem. But alas, I have done it again. Does anyone know if there is anyway besides a reinstall to fix this problem?

Hi -
Thanks for your fast response. When I right click on the top bar where it says Field Tree I get this menu: Restore, Move, Minimize, Maximize and Hide. If I right click on the bottom bar of the Field Tree or in the dialog box, I get the options to Allow Docking, Hide, Find in Formulas. So I click on u2018Allow Dockingu2019 - nothing happens. Then I double click on the dialog box and nothing happens either. I can still move the Field Tree box anywhere, but can't seem to dock it. It seems like the u2018Allow Dockingu2019 option is for an item in the Field Tree and not really for the box itself.
Can you tell what I am doing wrong?

Seq editor E box?

Similar Messages

Maybe you are looking for