Sequence and Capture Settings Match, Still Need To Render

I am capturing my video footage through a AJA Kona board using the SDI input. I have set my capture setting in FCP to 525 29.97 DV, and have set my sequence setting to match, also 525 29.97 DV. Yet when I overwrite the footage to the the sequence it needs to be rendered. I was under the impression that if the sequence and capture settings match I would not have to render. Is this not true?

The orginal footage is not DV, it is DVCPRO 25. I am capturing in the DV setting because of the length of the footage. The DVCPRO deck doesn't have a firewire output.

Similar Messages

  • Sequence and Capture Settings Help Needed

    Hi there...
    Need some advice on setting my Sequence and Capture Settings in FCP 6.0.4.
    I have a Sony HDR-SR1 (AVCHD) and I know I how to bring the footage in through "Log and Transfer", but I'm not sure what I should be bring the footage in as.
    Should I capture with HDV, or can I bring the footage in as ProRes 422 (HQ)? Once captured, should the Sequence be set to HDV - 1080i/60, or should it be set to the ProRes setting? Or, does AIC still play a factor in this and I should choose that?
    Correct me if I'm wrong, but if I bring in as HDV, the file size will be very large. But if I bring it in at ProRes 422, the filesize will be smaller, but how much will I lose in compression?
    Also, does anyone know if I'm stuck shooting 1080i/60 or can I get 1080i/50 or 720p/24/25/30?

    The orginal footage is not DV, it is DVCPRO 25. I am capturing in the DV setting because of the length of the footage. The DVCPRO deck doesn't have a firewire output.

  • Sequence and Capture presets for 16x9 minidv

    FCP 6.0.6
    checking capture presets for sd mini dv shot in sd 16x9 (US).
    what are proper sequence and capture settings?
    in sequence setting - should frame size box remain ntsc dv (3:2) and then just check 16x9 anamorphic box?
    in capture settings - frame size should it be ntsc dv (3:2) and then check 16x9 anamorphic box?
    thanks in advance

    Go to the menu Final Cut Pro > Easy Set Up and from the drop down menu choose USE: DV-NTSC Anamorphic.
    Click Setup.
    That will make all the correct settings at once.
    MtD

  • Right sequence and export settings in Premiere Pro CS6, video with still images

    I am trying to run a video on my website (self hosted). This video, made with Premiere Pro CS6, consists of still images with different video effects.
    This video is only 50 seconds, but when I transform this in the ogg, webm and mp4 format, I obtain file with large size and the quality is not good.
    Could you please guide me to find out the right sequence and export settings in Premiere Pro CS6 to obtain a video for the best possible quality on the web?
    A precise description of the settings would be awesome. 
    Thank you
    Silvia

    Make the export setting the resolution you want to use on the web.
    Make the sequence settings accordantly to these export settings

  • I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

    I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

    According to:
    http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
    It has DVI ports.  This means you are best to use an adapter that supports DVI.  Note there is no audio that carries over DVI.  What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

  • My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I downloaded the latest version of Adobe Reader (11.0.07) and installed it. Message said install successful. But APEX learning software does a check to see if my system has Adobe Reader and it says I still need to install it. What's up? This has happened

    I downloaded the latest version of Adobe Reader (11.0.07) and installed it. Message said install successful. But APEX learning software does a check to see if my system has Adobe Reader and it says I still need to install it. What's up? This has happened to me numerous times throughout the years. I need to get to the bottom of this problem. Thanks for your help.

    You still don't give us the message you are receiving.  My guess: you are trying to open a PDF in a browser that uses its own PDF viewer, not the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • My IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

    my IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

    Yes I have put in the correct password, its all numbers so can't get it wrong really.
    It has connected before as has my iPod and that won't connect either. I have checked that they aren't on the blocked list of the wi fi. Managed to download the new version of iOS and that hasn't made a difference.
    I have the wi fi plugged directly into the computer rather than the booster hub as the computer won't connect to it when its in the hub. I did get the iPad to connect to the internet when it twas in the hub but once I upgraded the iOS it won't accept the wifi password in the hub either.

  • Why do i still need to render if in prores422lt?

    i was wondering why i still need to render in a timeline that is 422LT and the clip i just dropped in is also 422LT? is it because the clip isn't the same dimensions as the timeline? for example my timeline is 1920, but the clip i am dropping in is from a screenshot that is 1680x1050. the front bumpers and titles are already dropped in and they are at 1920, and when i drop in the smaller clip with the same codec, it shows as red.

    The best thing to do is to screen capture in the frame resolution of your program. Watch the frame rate on the delivered SnapzPro media. The frame rate is usually screwy and has to be fixed in Cinema Tools.

  • Still need to render after using Compressor 4...

    Hi there.
    Having a small problem figuring out why I still need to render a video clip after using Compresor 4.
    I am able to add the fiile to Compressor 4 successfully.
    I select "Apple ProRes-422" as my codec
    I chose a destination and click submit.
    It takes the file - and does its thing and places it in the correct folder.
    When I go to Final Cut Express (4.0.1)- and "Import" the file - I see the long red line at the top and it says my clip is unrendered...
    It seemed so straight forward when I looked at the YouTube videos...
    I am currently on Lion...
    Thanks,
    SparkyCanada

    That would explain it...
    Thanks!
    SparkyCanada

  • Help choosing capture,sequence and export settings?

    Hello, Im new to Final Cut. Im using final cut pro 6.0.2 and trying to teach my self the basics of this program. I Shoot with a Canon GL2 in the 16:9 setting and I'm not sure what the optimal settings are for the sequence, capture and export settings. Someone recommended the DV NTSC anamorphic for capture and sequence settings which seems to work fine except when I export to QT movie it appears to be displaying in 4:3 instead of how it previews which is 16:9. Any help would be greatly appreciated.

    Hi CJ,
    Welcome to the discussion agora,
    ...the DV NTSC anamorphic for capture and sequence settings which seems to work fine except when I export to QT movie it appears to be displaying in 4:3 instead of how it previews which is 16:9.
    That's normal. Are you watching it in QT? QT displays square pixels while your movie has rectangular ones.
    Go to QT main menu>Window>show movie properties>presentation check box and change *conform aperture*.
    Since you say that you are new to FCP bookmark these links as they might turn useful in many occasions:
    http://www.kenstone.net/fcphomepage/fcp_homepageindex.html#fcp
    http://movielibrary.lynda.com/html/modListing.asp#titleListing
    g.

  • Unrendered Audio - sequence and clip settings are the same

    When I drag a clip to the timeline a redline appears on the top of the timeline. I know this means that there is a setting issue between the sequence and the clips. All the settings are the same with the exception of the:
    audio format - Clip: 8 bit integer
    Seq: 32 Bit Floating
    Audio Rate - Clip: 48000 5kh
    Seq: 48.0 KH
    The clips which is 1 1/2 HR takes 6 minutes to render.
    Does anyone know why I need to render this clip?
    Macbook Pro   Mac OS X (10.4.8)  

    Here: a foolproof way to ensure clip-sequence settings match up:
    http://web.mac.com/steelepro/iWeb/steelecuts.com/fcs%20detective/6FD1D5FD-0C56-4 F06-992C-902D00556549.html
    And if you still have the problem, why not convert it to AIFF via QT?

  • Sequence and Capture Presets

    I've shot and captured 35 hours of footage originally shot in HD (output in standard def 16:9) using Final Cut 5.0. After loading it and spending hours organizing it, I found my Sequence Present is 3:2 - Also the Aspect Ratio is set to NTSC-CCIR 601/DV Anamorphic 16:9 is off. Compressor is DV/DVCPro NTSC. Pixel Ratio is also NTSC-CCRI 601/DV.
    Capture Preset is NTSC (3:2) Anamorphic is unchecked. Compressor is DV-NTSC. input is DCR TRV 900. I captured from a Z1U.
    Can anyone tell me- aside from being a dumb *** in the first place- how I can redeem my project> ? I need this to be for professional broadcast (standard def, 16:9) - I'm on deadline and want to avoid recapturing. If I DO need to recapture, can retain markings/ subclips?
    Thanks a bunch!

    Well there's a couple of things to check.
    What settings did you use on the Z1U? (HDV, 1080i, 30fps?)
    Did you use the capture preset mentioned in your post to capture the material? (check in the browser or item properties)
    If that's the case, you have an offline version of your material and you will have to recapture the whole thing (use the HDV capture preset) or online your final edit (basically only recapturing the material used in the final edit)
    I'm not sure how the online process will work in this case as I only have experience with PAL. It could prove to be tricky but someone here in the discussions forum must know if and how it's possible.
    - Aleksander
    G5 2 GhZ dual Mac OS X (10.4.8)
    G5 2 GhZ dual   Mac OS X (10.3.9)  

  • Sequence size different from clip size = need to render?

    Dear All
    I would like to edit DV-Pal clips (720*576) in a sequence that has identical settings except the frame size: 1440*576. The final product is then a video with the width of 2(720576).
    If I drag into that sequence a clip, FCP asks me to render it. Is there a way around this (for a basic real time edit)? I lowered render options (in sequence settings) to a minimum, still it needs to render. I lowered sequence resolution to half the desired output (720*288) still it wants me to render.
    I coudn't find any thread discussing this problem.
    thank you,
    Hynek

    Dear Michael
    I don't intend to do a stereoscopic movie. Still I see similarities, or am I wrong.
    I would like to run different clips next to each other, and sometimes I would like to stretch one clip over the whole 1440*575 canvas (of course loosing some image at the top and bottom).
    The only way I found around rendering my sequence all the time, is to edit my video in a 720*576 sequence by dragging two clips in, resizing them to 50%, and putting them next to each other (each on a different track). Once I have done my edit I take each cut into the 1440*576 sequence and I scale each clip to 100 percent (with copy attributes). I have to do some repositioning of the clips on the canvas (again time can be saved with copy attributes). Then I render it all ONCE.
    now is there an faster way? can I learn something from your work flow?
    greetings,
    H

  • Help with sequence and export settings

    hi
    need to edit some clips made with camtasia using the tech smith codec
    first i convert clips to dvd using stoki converter
    then when i start prem cs4 i not sure which settings to use in the "new sequence" window under the editing mode drop down
    also not sure of the settings at export settings under the format drop down
    need to maintain the best quality
    thanks

    For the answer to "what Sequence Preset?" you will want to match your Imported footage 100%, even if that means choosing the Desktop Preset, and then customizing all aspects of it, to match.
    For the Export, start with "how do I intend to deliver this material?" That will give you the basic settings, and then you can tweak those to suit. How do you plan to deliver the material?
    Good luck,
    Hunt
    PS - this ARTICLE might prove useful.

Maybe you are looking for