Sequence clip with red line above
I imported several clips from a Nikon D300s camera into PP, and put on a sequence timeline. 4 show the yellow line above, indicating matching settings, but 2 show red lines, and I don't know what is different. All were done at the same time, and shouldn't have any different settings, to not match like the others. What could be the reason?
Originally, I created the sequence by matching the camera settings, and then imported all the video clips. that's why I don't know why 4 would have yellow lines and 2 red, since they were all from the same source camera and day. All had been put on one sequence.
After finding I could have separate sequences within a project, today, I dragged the original, untrimmed AVI files to the new sequence box so they would match for sure, and then I copied and pasted the same (but trimmed) file to this sequence, so each of the 6 has its own sequence. Still the 2 have the red line. I didn't find any effects to clear either.
Similar Messages
-
How do I get it so after initially importing my video the line above the time line will be green instead of red. It stays red until after I render the whole clip. I am importing my video clips from my camcorder. How do you determine the correct project settings if that is the issue?
Thanksfreedog69
How do I get it so after initially importing my video the line above the
time line will be green instead of red.
Not possible as worded. If you have the correct project preset, there will
be no colored line over this Timeline content.
If you do not have the correct project preset, there will be a red line
over this Timeline content.
What version of Premiere Elements are you using and on what computer
operating system is it running? APE 8 Windows XP 3GB of ram Pentium Dual core
Proc 2.41 Ghz
If you are talking "red" line, then you must be working with a version of
Premiere Elements earlier than 11. Assuming that....
If your project preset matches the properties of your source media, then,
when you bring one of those files to the Timeline, you will get no colored
line over the Timeline. But, after that, after you edit that content, a red
line will appear. That is when you render the Timeline content to turn the
line green.Thereafter, that original content will never revert to the no
colored line status as you work through editing that project. It will just go
through the red green color indicator system.
No colored line and green = the program telling you that you now have the
best possible preview of the Timeline content when viewing it in the Edit
Mode monitor playback. Red line = the program telling you that you do not
have the best possible preview of the Timeline content and, if you want that,
then you can press the Enter key of the computer main keyboard to make that
happen.
What are the properites of your source media... Canon HF 10 camera and
Panasonic HV-720
video and audio compression
frame size
frame size
interlaced or progressive
file extension
pixel aspect ratio
General Panasonic HV-720
ID : 1 (0x1)
Complete name : K:\Busters_Tap\New
Matches-CamB\f0069412.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 2.00 GiB
Duration : 58mn 59s
Overall bit rate : 4 854 Kbps
Maximum Overall bit rate : 18.0 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected] (mailto:[email protected])
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=1, N=30
Codec ID : 27
Duration : 58mn 59s
Bit rate mode : Variable
Bit rate : 4 267 Kbps
Maximum bit rate : 16.8 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.069
Stream size : 1.76 GiB (88%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 58mn 59s
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -558ms
Stream size : 162 MiB (8%)
Text
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Duration : 58mn 58s
Delay relative to video : 34ms
General- Canon HF 10
ID : 0 (0x0)
Complete name : K:\Busters_Tap\New Matches
CAM-A\00001.MTS
Format : BDAV
Format/Info : Blu-ray Video
File size : 1.90 GiB
Duration : 49mn 5s
Overall bit rate : 5 551 Kbps
Maximum Overall bit rate : 13.7 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected] (mailto:[email protected])
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : 27
Duration : 49mn 5s
Bit rate mode : Variable
Bit rate : 5 066 Kbps
Maximum bit rate : 12.0 Mbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.109
Stream size : 1.74 GiB (91%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 49mn 5s
Bit rate mode : Constant
Bit rate : 256 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -66ms
Stream size : 89.9 MiB (5%)
What brand/model/settings camera provided you will the source media for the
Premiere Elements 10 project. Canon HF 10 and Panasonic HV-720
In a message dated 1/9/2014 5:00:15 P.M. Eastern Standard Time,
[email protected] writes:
Re: Red line above the time line
created by A.T. Romano (http://forums.adobe.com/people/A.T.+Romano) in
Premiere Elements - View the full discussion
(http://forums.adobe.com/message/5998225#5998225) -
My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc. Will a hard restart wipe all that out?
Agree with Richard:
-Your device needs both the CR and LF. To accomplish this:
option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
Details can be seen in this link:
http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
"Adding Termination Characters to VISA Serial Writes in LabVIEW"
Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
If someone find a working link please post it.
Regards -
Encore / Images Blacked out with RED line on top
New at this. I have 1.67gb left in my project. (I have a lot of photos) Any way when I add more (Shift / Ctrl / g ) When I look at the bottom Left where the slides show up I just loaded 2 of the 60 photos I can see but the other 58 are black. All 60 have this red line above them.
Can anyone teach me what's going on here:)
THANKSJoseph,
You are possibly (note: "possibly") on the right track with the elimination of each slide show, until you find the one that is "possibly" causing the problem.
Get a spool of DVD-RWs (rewritables), and do a Project with one of your slide shows, then burn to DVD-RW and test that. Does all work as it should? In that Project, add another slide show, repeat the DVD-RW burn again. Still OK? Add another, and another. If the process hangs, errors out, on one, check it completely to see if you can spot a problem with it. Sometimes, it's some tiny glitch that ruins the whole Project, and you have to spend some time searching through tons of good assets, just to find the offending one, or ones.
As for the size concern, take a look at the Disc Tab in your Project Panel. There will be a diagram of the DVD with the used portion colored in. Does it show that you still have room? If not, check the CD-ROM area, just below, to see if you accidently added some content there. If you have exceeded the capacity of a 4.7GB DVD, Encore should give you an error message, suggesting that you go with a DVD-9 (Dual Layer), instead of a DVD-5.
Question: where did you get the info, that you still have 1.38GB of space on this Project, the Disc Tab in the Project Panel? If so, that should tell you that you DO have room, i.e. the Project is not too large. It would then follow, that you likely have some problem and my first statements might help you track these down.
Good luck,
Hunt
[EDIT] PS, Harm is only trying to help you explain your problem in enough detail, so that the folk who hang out here, can, in turn, help you solve your problem. As you can see from my response, I'm doing a lot of guessing, and much/all of it might be wrong. With more detail (per Harm's link), others will see what you started with, what you have done so far, and maybe even some hardware issues. The first couple of folk, who responded to you, are some of the best on this board. -
Sorry about the long title.....its my first post.
My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period. My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
Apple Retail Store - Genius Bar -
My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?
I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry. -
I am unable to drag any playlists to my ipod- the circle with red line through it shows up and precludes it from being accepted- what is up ?
Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao. -
My Imac is showing gray screen with red line when booting and restarts again
My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help
The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode -
Solo Button in Channel Strip with Red Line
Solo Button in Channel Strip with Red Line through it and it won't solo?
How'd it happen and how do you get rid of it?
Thanks!Try This----From the Manual
Logic Pro, Express: Solo Safe mode may not remain disabled for a particular channel strip
Symptoms
In certain projects, "Solo Safe" mode for a channel strip may enable each time you load the project, even after you disable it and save the project.
Resolution
When a channel strip in Logic is "Solo Safe", it remains audible, even when other channel strips are soloed. Solo Safe is indicated by a diagonal red line through the solo button on a channel strip.
You can manually toggle the solo safe status of a channel strip by Control-clicking its solo button. There are times when you may find that a particular audio channel strip in a project reverts to solo safe mode when you load the project, even after you manually disable solo safe. Here is why that may happen and steps you can take to prevent it from occurring.
A Logic project contains a special audio channel strip used for pre-listening to audio in the Sample Edit window, Audio Bin, and Loop Browser. When you create a Logic project from one of the factory templates, this channel strip is assigned to "Audio 256". This channel strip stays in solo safe mode so that you can always preview audio. The image below shows the channel strip for a new, empty project.
If there is no audio channel strip in a project assigned to "Audio 256", Logic will use the highest-numbered available audio channel for pre-listening. When the project is loaded, that channel strip will be put into solo safe mode. You may find this happens in older projects that you open in Logic 8, or in cases where you have deleted the "Audio 256" channel strip in a Logic 8 project. To prevent this from affecting channel strips you are using in a project's arrangement, follow these steps:
Choose Window > Environment.
From the Environment window menu, choose New > Channel Strip > Auxiliary. A channel strip will appear in the environment.
Select the channel strip. It will highlight.
In the Device parameter box in the upper left of the Environment window, click the arrows to the right of "Channel" and choose Audio > Audio 256 from the menu.
Select the text tool, click on the name below the channel strip and name it "Prelisten". -
What does a red line above finder icon mean
Just notice this 2 red line above finder icon. This is since i downloaded Lion. Thank for any help.
ChuckHey Chuck,
I had the same problem, and today I found a solution on an other forum that worked for me.
First you need to open the library folder for your user. The library is hidden in Lion, but you can open the folder by typing "open ~/Library/" in Terminal. Then go to 'Preferences' and delete the file 'com.apple.finder.plist'. Finally, type "killall Dock" in Terminal to restart Dock. I hope this will work for you as well.
Mikael -
Battery Icon with Red Line on BB 8310
So, how pervasive is the problem of theBlackberry 8310 and its icon with the red line across from it? Is it a problem with the battery? Or is it a problemwith the phone? IS there any fix?
Mine came brand new in a box a few daysago. It came with a blue battery (C-S2). As soon as I put the battery into thephone, the dreaded Icon (battery with a red line through it) showed up. I charged it, thinking that means the batteryis empty and left it charging for over 5 hours, hoping the Icon will go away.It never did, and now 4 days later and an infinite number of battery pulls, some with a twist or two, it is still there. If it was any otherpiece of technology I would dismiss it as junk. But, oh, this is the famous BB.
Instead, I did some research, have spentupwards of 15 hours over the last 4 days, trying to figure it out. I ran intolots of things on the Net, including the crackberry postings with people sayingthat they got rid of the problem by dropping (!!) the BB from 3-4 feet,sometimes repeatedly, until it fixed itself. Others report the problem aftersome time of use (flaky construction?). On this forum alone there are at least4 recent postings with the identical problem (search for “8310 battery line”and find the post of “Spyridonas” 12-13-08, of “black_black_b” 06-10-09, of “hades” 09-27-09 and of “Alien_X” 09-28-09. None of those seems to have got the attentionof anyone from RIM, and nobody offered any meaningful solution. As people have reported time and again, it isvery unlikely to be the problem with the battery, so we are left to conclude thatthe phones are lemons.
We spend lots of money for a useless pieceof junk and nobody at RIM cares. If this was a car, it would have been recalled a long time ago. I will get my money back and buy somethingelse, maybe a Nokia or even a Moto. Watch out RIM, you are pissing off a lot ofpeople, and some of them are the wrong people to piss off.Alien_X wrote:
I did not overlook anything.
I think you did. You pointed out each instance you could find when this fix did not work. You failed to point out the dozens of times this fix did work.
So, to answer your initial post questions:
So, how pervasive is the problem of theBlackberry 8310 and its icon with the red line across from it?
Not very pervasive. It certainly is not one of the top ten problems judging from the questions I see asked here and elsewhere.
Is it a problem with the battery?
Could be. Have you tried a brand new battery (I forget if you said).
Or is it a problemwith the phone?
Again, could be. There could be an issue with your battery contacts on the device.
IS there any fix?
For most, yes. We've been over that.
Try cleaning the contacts on the device. See if that helps. Try a new battery... and often new batteries are very low or close to dead upon purchase so follow the directions above to charge and bootup.
Alien_X wrote:
To: JSanders,
I had already seen this bit of lame “advice” that has been circulating on BB boards and hadtried it several times,
Oh, thank you so much. You know, you get what you give. Your initial post above did not state what you had tried several times. We don't read minds, well, I don't at least.
Alien_X wrote:
Anytime you buy a brand new item and it fails to work after 4 days of trying anything you can find I”d say you got a lemon.
You've had it four days, brand new, and you haven't returned it for a new device? That would be my first suggestion had you stated that first off. I would not keep that device if first off it didn't work. But a lemon? Nah, it's not a pervasive problem inherent to the model, which is what a lemon is normally defined as.
Alien_X wrote:
My name is neither Gambino nor Gotti,
eh, your threats make it seem so, or that you want to be. Has nothing to do with race, just your attitude here.
Alien_X wrote:
To: JSanders,
offer no meaningful assistance whatsoever, especially for a problem that has been known for at least 10 months.
Four days or ten months?
Alien_X wrote:
Sorry to everyone else, but the personal attack was not warranted and it needed a response.
This is a community support forum. Your post above just reaks of attitude. If you're expecting users here to flock to your post to help out with that kind of attitude and silly threats, well, as you can see, it just didn't happen.
Try being nice and seeking assistance, you might just get a better response. There's been NO personal attacks on you, I don't operate that way.
Alien_X wrote:
To: JSanders,
On Moto, much as you deride it,
I'm afraid that is just indicative of whole problem here, I don't think you are reading these posts. I didn't deride the Motorola. I said you'd love it, unless you consider that derision. How odd that you would. They have great devices.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Part of footage becomes black with red bar above it?
When I throw my footage into FCPX, before it finishes the background analyzing it is fine. But after, it makes part of my footage black with a red bar above the part that is black. Does anyone know what this is and how to fix it? Here is a picture of what the timeline looks like: http://cl.ly/image/2E1Z0t1y2L1x
Thanks!Select the clips in the browser, right-click and choose Transcode Media. There'll be an option to optimize.
You may also need to trash the thumbnails from the Render folder, but that won't effect the project. -
I have a curve that only displays the battery icon with the red line thru it.
I have tried 3 different batteries in it and have also tried reloading the OS thru DM but no luck. I have a second Curve that works just fine with all the batteries I have for it.
Is there anyother way to reload the OS without using DM to do it? or any other cure for the battery problem
keswan
Tech Assistant
Smith International
Two to the body, One to the head
We prefer them alive
But, We'll take them deadHi and welcome to the forums!
Try doing the application load with the battery out. It will error out and give a message similar to "unable to connect to device during a multi-stage load operation". Once you get the error, put the battery back in and try the application load again.
You may have to try this four or five times, but if you can "spark" it for the second it looks for the PIN and gets connected you can finish the load.
Make sense?
Thanks,
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Battery symbol with red line thru it
how do you fix the blackberry with a battery symbol with a red line thru it?
Try this first:
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Battery with red line after dropping 8800
Yesterday I dropped my 8800 on a laminate floor. Screen went all white. I took out battery for a few secs, then had blank screen with green led flashing. Now it just has a battery icon with a red line through it. Have I killed it? Be grateful for some help....
download desktop manager from this link
http://na.blackberry.com/eng/services/devices/
and this is the user guide
http://na.blackberry.com/eng/deliverables/5837/BlackBerry_Desktop_Manager-4.7-US.pdf
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.
Maybe you are looking for
-
Issue with Gregorian Calendar and setting Day of the week
Hi This may have a simple solution, but its currently got me stumped. Basically, after some calculation I determine the date that a particular event should occur on. These events are listed in a JTable where the column headers are the dates of the be
-
2009 Macbook white slow to boot after upgrade from 10.5.8 (Leopard)to Mountain Lion SSD
Ok, I have a 2009 Macbook White w/ 2Gz Core 2 Duo, 2Gb RAM, 120Gb HDD and NV9400M graphics. Mountain Lion finally tempted me to do the upgrade and I wanted to take the opportunity to upgrade to SSD as well. Here's what I did: Originally my 120Gb
-
I am a designer and not a Java programmer - don't hate me - and i am using a small calendar applet on a web page. This has color configured from javascript parameters as follows: <param name=bgcolor value=13684944> <param name=bgcolor2 valu
-
Graphics Card shortage for G5 Dual 2.0 GHz?
This is more a comment maybe out of frustration than anything. Sorry. I have a G5 Tower Dual 2.0 GHz with ATI 9800 Pro w/128 Ram. 1.5 Meg of memory. Been a Apple/Mac supporter for over 20+ years. If anyone has any suggestions as you read on, please l
-
Mail crashes all the time on opening
I have going crazy with MAIL. It´s crashing all the time when i open it.. I have used the disk utility, verified and repaired permissions, verified the disk and so on... What can i do to reuse Mail... Leave it here the crash report: Process: Mail [14