Sequence "could not be found" PP to SG - and other annoyance WRT formats.

Hello guys
I am getting really frustrated here, trying to use SG to grade a PP sequence.
When I send to SG from PP (CC versions) I get a big red splash screen saying SG cannot find the sequence, and it gives the path to the PP project.
This is a show stopper!
Then if I try to open the BPAV folder containing the  XDCAM footage so I can grade the clips or at least create a Lumetri preset from SG to apply in PP, it seems SpeedGrade CANNOT OPEN XDCAM FOOTAGE?????
Seriously guys, you have to be kidding me!
This is 2013. XDCAM is hardly a new format???
What is going on there, I see the pathetic list of formats accepted, are you planning on working on this at some point, or should one be looking for viable alternatives.
Extremely unimpressed.
Mark.

You can also do a manual updagrade from the below links:
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5679
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5678

Similar Messages

  • My iPad2 "could not be found on the network" and won't sync

    Please Help!
    My iPad 2   won't sync and doesn't seem to be "seen" by my PC.
    I have rebooted, restored and reset the iPad, and installed latest ios.
    PC is running Windows 8 with latest iTunes whic has been re-installed.
    The USB port and cable work fine - I don't have the the same problem with my iPhone 4S.
    The iPad logo comes up in iTunes as a device, and I get the "pinging" noise when connecting. The iPad details come up in iTunes, but I can't back up or connect or do anything witht it.
    It won't sync and I get error messages:"iTunes was unable to load data class information from Sync Services"
    and in one of my explorations
    "iPad could not be found on the network"
    Sometimes when the Ipad is connected iTunes will be ok for a short time, then go into "not responding"
    When I try Windows Explorer the iPad does not show in the "Removable Storage" section like it used to, and like my iPhone still does.
    In Device Manager, Apple iPad Properties, I get the message "This device cannot start (Code 10)". On line searchinh suggests this could be a driver problem however when checking for drivers I got the message saying my drivers were up to date.
    Please HELPPPPPP!!
    Thanks

    It's now sorted - a driver problem
    I found this tip in another thread. Thanks LexLester
    LexLester 
    Re: How to transfer pictures from iPad to PC?     06-Dec-2013 09:51    (in response to amershiraz) 
    When you are connecting your iPad with your PC, go to Control Panel, click 'view devices and printers' under Hardware and Sound. Your iPad device should be shown in there even it is not showing in My Computer. See whether there's troubleshoot for Apple iPad. Then troubleshoot it. It should be the device driver which is not functioning or being disabled or not up to date. You should be able to find your iPad under the Portable Devices in My Computer after the troubleshooting.

  • Recieving error 8001: Database connection could not be found

    In hyperion reports 11.1.1.3 I am trying to create a new report. I created a new connection and after i created a new grid I wanted to see what is looks like. when I launched it. I recieved the error 8001: The database could not be found 8c5a0a4_13c44c8A227_-7d10 I tried other connections I recieved the same error. Just to make sure I tested an extising report and it worked fine. Can some one please tell me what I am missing and what do i need to do to get this wo work. Any help is appreciated

    I logged out of Hyperion reports and logged back into the application and I had a connection with no issues

  • IP SLA Detailed daily, weekly Report could not be found

    Hello.
    I use Cisco Prime LMS 4.2.1. When i generate IPSLA Detailed  UDP Jitter Report with granularity "Minute"  "Hourly" everything is OK, but when i with "Daily" "Weekly" i get this message: "Report could not be found". Report "Availability" and "Latency" generate well.
    In IPSLA System summary i see again only "Availability" and "Latency" reports.
    System Consolidation Daily Job generates every day. And inside job i can see that UDP Jitter rows is proccesed.
    By the way, I can generate UDP Jitter report from CLI.
    In Relise notes LMS 4.2 i saw open bug CSCtv11780:
    An error message "Report could not found" is displayed when you generate a report using:
    •System: Management Type in the Report Attributes column, and
    •any other attributes, such as Location from System Inventory Group in the Rules for Attributes column.
    Someone help me, please.

    SharePoint guys figured it out. That error about the missing DLL is very misleading because it's still not there after we got it all working.
    needed to install sql 2012 sp2 msas oledb driver
    some users didn't have limited read access to the root web app
    Jakub @ Adelaide, Australia Blog

  • Compressor could not be found...

    Someone gave me a .mov file on a disc that I saw working on their pc.
    When I try to open on my powerbook, I get a message that 'compressor could not be found...' and it could not be downloaded.
    I'm running qt 6.5.2 and I think the file is qt 7. If that's the problem, I don't want to upgrade.....is there a work around so I can edit the clip with what I have?

    If you can open the file in QT (even if the video window is white) you should be able to check the compression by opening MovieInfo. If it says it is H264 compression then you are out of luck in terms of display in QT 6. Someone may eventually come up with a non-QT viewer for that compression type but I haven't heard of any at present. So far QT 7 is required to display any form of H264 compression.

  • Err 404 The URL could not be found on the server

    I attempted to purchase a song and got this error message, error 404 the URL could not be found on the server. Now every time I download any song, it attempts to find the song and gives me the same error message. I don't care if I lose the song. I would just like to make it stop trying to download it.
    Any ideas?

    I've the same problem, and I've reported for the problem, but I received an non-reply, such as "do you have a good internet connection?", etc...
    When I start iTunes, it ask me for my iTunes Store password, then it try to download the missing file I have buyed, but always with the same error message: There was a problem downloading "Fool to Cry / Sucking In the Seventies / The Rolling Stones". The URL "http://a438.phobos.apple.com/r10/Music/y1969/m12/d31/s06.dwrnogas.a.mp4" could not be found on the server.

  • URL could not be found on server

    Please help!  All of a sudden every single podcast I try to download says The URL "0" could not be found on the server.  I've tried uninstalling and reinstalling.  I tried upgrading to the latest version.  Nothing helps!  I didn't change anything...I'm not sure why the sudden change.  Any help?!

    I've the same problem, and I've reported for the problem, but I received an non-reply, such as "do you have a good internet connection?", etc...
    When I start iTunes, it ask me for my iTunes Store password, then it try to download the missing file I have buyed, but always with the same error message: There was a problem downloading "Fool to Cry / Sucking In the Seventies / The Rolling Stones". The URL "http://a438.phobos.apple.com/r10/Music/y1969/m12/d31/s06.dwrnogas.a.mp4" could not be found on the server.

  • Need Registry Help / Clarification on "Word (version XP or onwards) could not be found"

    In regards to "Word (version XP or onwards) could not be found on this machine" and the registry hack I have a few questions.
    Current Set up: Windows 7, 32-bit.
    LiveCycle ES2, All of the patches have been applied to LiveCycle ES2
    MS Word 2010, winword.exe found in C:\Program Files\Microsoft Office\Office14\
    I have read: http://forums.adobe.com/message/3983628
    And I get that the only way to fix this is by doing this:
    Problem is the Registry. LiveCycle searches only the following folders.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\10.0\Word\InstallRoot
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\11.0\Word\InstallRoot
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\12.0\Word\InstallRoot
    But word 2010 is under
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\14.0\Word\InstallRoot
    So, solution is (for win x32):
    Create following Path in Registry:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\12.0\Word\InstallRoot
    create new "string value" "Path" with value "C:\Program Files\Microsoft Office\Office14\"
    Quotes are not necessary.
    The question I have is about what sections in the Registry need to have the Path added.
    Is it only:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\12.0\Word\InstallRoot
    Or do these areas need it as well?
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\12.0\Word
    And last:
    Does the adding the Path apply to only the 12.0 or does this need to be added to the 14.0 folders too?
    I've never played with the Registry, and after applying the hack to the
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\12.0\Word\InstallRoot folder, I still cannot import Word files.
    So I'm guessing it is just my ignorance on how the Registry works, or I misunderstood something in the instructions.
    Thanks for the help! 

    Gave up on the whole scenario, and got the free LiveCycle ES4 upgrade when I updated to Adobe Pro XI.
    Import functions from Word now work.

  • C2 223 A valid bill of material could not be found for material 5089

    Hi Experts
    I have Production orders that use a phantom material 63955 with Std costing control.  This material uses three materials (5089,5233 & 5235) of moving average control.
    Material 63955 is a HALB and uses all the numbers 5089,5233 and 5235 which are ROH.
    With costing material 63955 with CK11N or CK40N, the error is
    C2223 A valid bill of material could not be found for material 5089 and the same for 5233 and 5235
    Diagnosis
    Material 5233 is marked as a phantom assembly. When the system tried to explode a valid bill of material for material 5233, it could not find one.
    System Response
    The system generates a normal reservation for 5233.
    Procedure
    Check the bill of material for material 5233
    The 5* numbers do not have a bill of material and are purchased externally.
    What must I do now please?  These materials cannot be costed.
    Kind regards
    Dawn

    Hi..
    You  check whether material 5233 have procurement type ‘E’ or ‘X’ and
    special procurement type ‘50’ in MRP2 view of Material master.
    Material 5233 with the above conditions is Phantom assembly.
    If Material 5233 is material master for external purchasing, Material 5233
    should have procurement type ‘F’ and special procurement type  space.

  • After Effects warning - The file Plug-ins/cineware ae default.c4d could not be found

    Hello,
    Running AE CC and whenever I start a New MAXON Cinema 4D File I get this error message.
    After Effects warning: The file '/Applications/Adobe After Effecgts CC/Plug-ins/MAXON CINEWARE AE/(CINEWARE Support)/default.c4d' could not be found.
    I looked and the files are still in the plugin folder and all looks well. Can't seem to find any specific info on the forums or when I checked the FAQ.
    Thanks,
    Dan

    When did you install the 12.2 update? The reason that I ask is that we had a brief problem when we first uploaded the update, in which not all of the Cinema 4D components were included. That problem only lasted for a few hours, but it meant that people who updated immediately after we released the update had problems like the one that you're describing.
    Try uninstalling and then re-installing After Effects. This will ensure that you are downloading the current and known-good update files.

  • The software could not be found on any servers at this time

    Hello,
    Within the last few days OSD from within the OS has started to fail. The error it provides is
    The software could not be found on any servers at this time. I find this error misleading since I can PXE, connecting to the same server, and the OS installs without issue.
    For giggles I did try and install some updates and other software from the server and they installed using Software Center. With that my boundaries are setup and the client is communicating with the DP.
    Distribution Point='http://<server.domain>/SMS_DP_SMSPKG$/Content_f90faa01-0846-4704-9d86-d788273ab397.1', Locality='LOCAL' ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_50cea2c8-29cb-48c4-830b-571f72e14c04.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_d5a14c61-8ab2-4ec9-808a-ab6f89ab56f8.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_0ea10922-95d6-4751-a3da-3dab19e70fa4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_310e7d49-0dd2-479b-886d-9c822ff214c4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_cc2d6253-a90d-489b-b294-7eb3ed645029.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_a41d3047-5a90-400b-bc76-7808ff0c8503.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_fed1abf3-ab3b-45ef-9c20-8a419c2a13b6.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_879fade3-5b18-4959-bb2b-bc8a9bed1f71.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_16bba65e-16a6-49bd-b757-536e65ff94f1.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_4a8abdc6-2c2e-4f4c-b2ab-38306ba90425.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_0b1e115f-d8cf-4b2a-944e-bdd888c1775e.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_384b9d17-1502-467a-99ca-2669f0d1b5c7.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_68117c8a-50c3-4b95-9e3e-965238fe749a.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_a38b2000-a2d6-4974-8409-827a76ad1b17.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    The number of discovered DPs(including Branch DP and Multicast) is 0 ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    I have a feeling the final line is the indicator to my problem, but I dont understand why. Unfortunately this seems to be happening at other sites as well.
    Edit
    I checked the boundary groups and made sure that they had at least 1 site server assigned. I also checked the permissions of Production (not-working) to Test (working) and they line up. When I choose 1 application/update to install the line
    The number of discovered DPs (including Branch DP and Multicast) is 0
    changes to 1. I also do not have the servers DP set to pre-deploy, if I recall that is the wording on the first tab of the DP settings. Also browsing the HTTP address provides results.

    Hi,
    The task sequence for unknown and known is the same.
    That is what I want to confirm. I did more research, and some indicate boundary issue:
    https://social.technet.microsoft.com/forums/systemcenter/en-US/75b22009-48ea-43b6-8992-b1f3d3bbe51c/the-software-could-not-be-found-on-any-servers-at-this-time
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

    When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • Error -Account 'Down-payments clearing account' could not be found for area

    When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
    Account 'Down-payments clearing account' could not be found for area 01
    Message no. AU133
    Please help me to rectify the same.
    Thanks in advance
    Deepak

    HI
    Please pay attention at  the possible causes of message AU133:
    1. Error AU133:
       a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
    structure.
       b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
    2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not  permitted.Check whether your account determination is correct               
       (Transaction AO90) in Asset Accounting Customizing. The same applies
       for the 'Contra account: Down payment posting'.
    3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
    4.Check if you need  revaluation accounts in depreciation areas involved   (AO90):
      -Revaluation acquis. and production costs
      -Offsetting account: Revaluation APC
    Please run also programm RACKONTO where missing or wrong customizing
    the accoutn determinations per company code is displayed
    Also have a look at note 7595 in this regard.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Photoshop Image Processor.jsx could not be found. CS5

    I like to use Bridge to export groups of photos and with past versions I've been able to select photos, go to Tools>Photoshop>Image Process and select one of my custom actions.  Now I get this error: Photoshop Image Processor.jsx could not be found.
    Any thoughts?
    Thanks

    By default the image processor script should be placed in the Application
    folder (on root level, not in the user
    account)/AdobePhotoshop/presets/scripts/ image Processor.jsx
    Also by default in Bridge preferences Start up Scripts Adobe Photoshop
    should have a checkmark in front of it.
    If you changed any of these there lies your fault, if it happened to fail
    out of the blue you first should try restart Bridge holding down option key
    and choose refresh preferences.
    First check if it works now and if it does again set preferences to your
    wishes. (obvious not deselecting the PS script... )
    Now I get this error: Photoshop Image Processor.jsx could not be found.

  • AE CS6 won't export MP4. "Some of the required components could not be found."

    After Effects CS6 (from Production Premium) running on 64-bit Windows 7 Enterprise SP1.
    Processor: Intel Core i7-3930K CPU @ 3.20GHz
    AMD Radeon HD 7900 Series video card
    64 Gb Corsair Ram (DDR3)
    Quicktime 7.7.4 Installed
    Currently attempting to export a short (2 second) video based on the predefined "H.264" preset with the only alterations being that I want the VBR 1 Pass to target 3.5Mbs (though I've changed this with no difference in outcome) and I want the video to multiplex as MP4. I immediatley get the error prompt: "Some of the required components could not be found."
    *Just tried using the 3GPP multiplexer and received the same error message. If I try to use the MPEG4 format I get an "unknown exception" error.*
    I've exported literally hundreds of items as H.264 with a MP4 multiplexer on this machine with current hardware and software. And now...no dice. After Effects boots correctly (or at least it seems that way) though I think it takes a little longer than it used to (not sure if the system cache just needs to be rebuilt).
    After Effects CS6 has all available Adobe updates. Quicktime 7.7.4 is also up-to-date. Video Card driver is up-to-date.
    What could be going on? I'd prefer to skip re-installing this program. I've had to do this numerous times already with this suite throughout the past 12 months; really getting sick of the down-time during reinstall. Worth noting that I have closed the program, closed all programs, restarted computer multiple times.
    I am currently going through my Adobe program files for After Effects. I am specifically looking through the 'Support Files' directory. A couple interesting things: 1. My 'MediaIO->Codecs' directory was last updated on 11/8/2013 (perhaps an AE update??) but each of the files within said directory have a last modified date of late September. Did something get wrongfully deleted in the hypothetical update? 2. In 'Media Core plugins->Common' I again have a last modified date of 11/8/2013, but again each of my files within the common directory were last modified late September. I have many expected .prm files but NO ImporterMPEG4.prm; should I have a MPEG4 specific importer file, or does the MPEG importer file do all of the work. Also, I have no ExporterMP4 (or anything of the MPEG, MPEG2, MPEG4 flavor). Should I have one of these?
    Don't know if this last paragraph helps at all but my fingers are crossed.

    Thanks Katrina for all your help.
    I talked to an Apple tech support person. Actually, my call had to be elevated to the next support level. Joy. You are correct, there are multiple listings of the files in the error report even though there is only one copy.
    The support person had me do a few things. Here is what eventually seems to fix things:
    1) For the mp3's that DID copy but were listed as not found... Some files were duplicated so deleting the duplicate with the "!" was an easy fix. I found one file that I could search by song name in iTunes but could not find it by song name search on the iPod. Looking at the iPod playlist I found the file listed by the filename (not song name) and the file played fine. Then in iTunes I double clicked on the song name ("!" showing) and selected locate. I then pointed to the location on the NAS. Resync and now the name of the song on the iPod changed from filename to song name. The file was no longer listed in the error report.
    2) For the m4a files that didn't sync... the problem songs appeared three times in a search in iTunes. Two of the listings showed the "!" next to the name. I deleted these two for each song that didn't sync and all transferred fine afterward.
    Perhaps there is an issue with ID3 tags since I use filenames more than tags in organization. Still, I would think that iTunes would not get so confused or be a little more friendly with its errors, especially considering how long its been around.
    Thanks again for your help. Looks like I have a manual way to correct this issue.

Maybe you are looking for