Sequence File has not been released
Hi,
After the execution is complete, I get (TestStand 3.5) a debug warning stating that a Sequence file has not been released!
The indicated file is my main sequence.
What does it mean?
Where and how am I suppose to release it?
Any clue as to where to start fixing this problem?
Thanks
Rafi
Hey Rafi
This error is occurring because somewhere there is a reference to an object that is not being closed. The first step would be to open just your operator interface(OI) and close it to see if the error occurs. If it does, then there is an object in your OI that isn't being closed. The next step would be to open an example sequence file in your OI and see if the error occurs. If it does, most likely the problem is still within your OI. If the example sequence file runs fine, then the problem is in your sequence file itself. Usually this error occurs in code modules that are being called and not in code that is native to the TestStand API. The native API tries to close everything for you to avoid this problem.
Thanks,
Pat P.
Software Engineer
National Instruments
Similar Messages
-
Have been using Adobe CreatePDF for many months successfully.
Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
Tom.I am still experiencing this problem. Customer service from Adobe has been abysmal!
I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
Note: This problem is happening always now, regardless of time being used.
Tom -
Hi,
I have a excel file that I have been using since beginning of year.
Yesterday, I tried to open it but a message comes out "
Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
After I click yes, the page is blank. The file is about 400kb in size.
I have try open and repair and third party repair program and not working also.
I would appreciate a lot if you can help me.
Thank you very much.Per your post, this problem might be caused by malware on the affected machine.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx) to kill the malware, and then repair Excel file itself.
If this is not the case, feel free to post back and let me know. Thanks.
Tony Chen
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I dot correct this?
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
The situation:
We are working with the InCopy feature (checking in and checking out ICML files).
The problem:
I might have saved a document with an ICML file still checked out.
The question:
Is there a way to find out which document was saved with the ICML file still checked out?
or in other words:
Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
Thanks for any help!Hello Sumit Singh,
thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
So, is there a way to trace back where an ICML has been used?
Is it possible to find out in which document the ICML is still checked out? -
I have downloaded CS5.5 three times and whenever I choose the set.up.exe file I receive a message that there is an error in the download and a file was not downloaded properly, but everything has been downloaded and has come through.
what files (name and extension) have you downloaded and what are their file sizes?
-
Purchased a used ipad on ebay, seller says it is locked in icloud and not released. He said he got it from a friend, but didn't know the id or password to get ot released from icloud. I asked if it was stolen of which I have not heard from him yet. Does anyone know how to get it reset so it can be used? HELP please!!
You cannot, and Apple won't unlock it for you. Ask eBay for a refund.
(111289) -
Are we still using Mavericks?
10.9.5 Mac OS X Mavericks
...until further notice, LOL
PS: my mini G4 PPC runs 10.5.8 -
When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file".
Win7 Pro, 64bit
Acrobat XI Pro, tryalCreate a one word pdf file. Try converting to word. If that fails, try a complete uninstall, run the cleaner tool, then re-install.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs -
Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.
pklfromarlington wrote:
Bob, Hate to steal your thunder but am hooked to an external hard drive using Time Machine and er information is where it shoudl be. Yes, I have combed the files, used Finder and any other tools I know.
You did not steal my thunder. You asked for advice, I provided advice. I assumed that since you nor the "support team" could find your files that you did not have any backup. You should have told us you do regular backups. We have no way to know otherwise unless you tell us. -
Adobe Reader will not email my .pdf files. Message: "Email has not been set up on this device."
Adobe Reader will not email my .pdf files. Message: "Email has not been set up on this device." I have 4 email accounts that have been set up. When trying to email from Adobe, the email screen does come up, but does not allow me to enter any recipients in the field, and when I try, the email page's fields simply goes blank and disappears, taking me back to the document I am trying to send. After trying repeatedly, I get the message about needing to set up my email. My mother and I have also noticed that when we try to open documents sent in A.R., they may open, or just go blank. Any suggestions or fixes?
Setting up your email is a bit out of the scope of this forum. I'd suggest asking for help in the Apple forums devoted to the iPad. Good luck.
-
The file '/foo.aspx' has not been pre-compiled, and cannot be requested
Hi All
I am using odp .net to access oracle data. I have also added oracle.dataaccess in my asp .net references. Everything works fine in my development and when I run the code through debugger. However, when I deploy the project in IIS, it gave me following error...
"The file '/foo.aspx' has not been pre-compiled, and cannot be requested
This is pretty generic error and I found out this is related to .Net assemblies.
By further investigation, I found that oracle.dataacess.dll is not present in the bin directory of a deployed web site. I am not sure why .net is dropping that dll in the deployment wizard.
Did anyone encounter this problem before?
I got a workaround for now that manually copting dll into the bin directory of deplyed web site. However, I am looking for more robust and technical answer..
The strange thing is I have been deploying the web site the same way for last 8 months and never encountered this problem.
thanks a lot..
Message was edited by:
amazonIf you add a reference to Oracle.DataAccess at design time it will be added as an assembly definition to web.config. Then you don't need a copy in your bin dir and it will be found in the GAC.
Eric -
Prepare has not been completed succesfully
Hi Experts,
I started an upgrade release 4.6C to ECC 6.0 on windows 2003 db version is SQL Server 2005,
I am getting an error message at the begining of prepare phase,
I've also updated sapup.exe version and source system kernel to 2364,
how can i prevent this error,
ERROR: PREPARE has not been completed successfully.
Correct the problems reported by PREPARE otherwise
you cannot start the upgrade.
here is UpgDialog.log
Target SAP system is AHQ
Enter the SAP instance number [00]:
? INSTANCE NUMBER =
Waiting for input since 30.Eki.2008 10:31:46
> INSTANCE NUMBER = 00
Type of database system is mss
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 = E:\upgdvds\upgmaster_51033520\UMN_WINDOWS_I386
Reading data from "Upgrade Master CD/DVD"...
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/3 upgrade to release
600 of EA-APPL
600 of EA-DFPS
600 of EA-FINSERV
600 of EA-GLTRADE
600 of EA-HR
400 of EA-IPPE
600 of EA-PS
600 of EA-RETAIL
600 of ECC-DIMP
600 of ERECRUIT
600 of FI-CA
600 of FI-CAX
600 of FINBASIS
600 of INSURANCE
600 of IS-CWM
600 of IS-H
600 of IS-M
600 of IS-OIL
600 of IS-PS-CA
600 of IS-UT
600 of LSOFE
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
600 of SAP_APPL
700 of SAP_BASIS
700 of SAP_BW
600 of SAP_HR
600 of SEM-BW
2005_1_700 of ST-PI
Target SAP system is AHQ, MSSQL database
? continue
? cancel
Waiting for input since 30.Eki.2008 10:34:32
> continue
ERROR: PREPARE has not been completed successfully.
Correct the problems reported by PREPARE otherwise
you cannot start the upgrade.
? continue
? cancel
And also in /usr/sap/put/log directoy these logs existent;
SAPup.log;
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
SEVERE ERROR: problems with SERVER mode - abort
...CANCELED at 20081030104921.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030105012
...end dialogue at 20081030105013
...begin dialogue at 20081030105013
...end dialogue at 20081030105015
...begin dialogue at 20081030105034
...end dialogue at 20081030105039
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105039
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105039
...end dialogue at 20081030105041
...STARTED at 20081030105041.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030105041
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030105041
...begin dialogue at 20081030105041
...end dialogue at 20081030105104
...CANCELED at 20081030105104.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.011.
...begin dialogue at 20081030105626
...end dialogue at 20081030105627
...begin dialogue at 20081030105627
...end dialogue at 20081030105630
...begin dialogue at 20081030105711
...end dialogue at 20081030105715
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105715
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105715
...end dialogue at 20081030105719
...CANCELED at 20081030105719.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030105752
...end dialogue at 20081030105753
...begin dialogue at 20081030105753
...end dialogue at 20081030105756
...begin dialogue at 20081030105814
...end dialogue at 20081030105818
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105818
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105818
...end dialogue at 20081030105824
...STARTED at 20081030105824.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030105824
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030105824
...begin dialogue at 20081030105824
...end dialogue at 20081030110026
...CANCELED at 20081030110026.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110034
...end dialogue at 20081030110035
...begin dialogue at 20081030110035
...end dialogue at 20081030110038
...begin dialogue at 20081030110054
...end dialogue at 20081030110104
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110104
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110104
...end dialogue at 20081030110123
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110134
...end dialogue at 20081030110140
...begin dialogue at 20081030110140
...end dialogue at 20081030110143
...begin dialogue at 20081030110149
...end dialogue at 20081030110154
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110154
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110154
...end dialogue at 20081030110155
...STARTED at 20081030110155.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030110155
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030110155
...begin dialogue at 20081030110155
...end dialogue at 20081030110328
...CANCELED at 20081030110328.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110335
...end dialogue at 20081030110335
...begin dialogue at 20081030110335
...end dialogue at 20081030110337
...begin dialogue at 20081030110342
SEVERE ERROR: problems with SERVER mode - abort
...CANCELED at 20081030110342.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110858
...end dialogue at 20081030110859
...begin dialogue at 20081030110859
...end dialogue at 20081030110901
...begin dialogue at 20081030110937
...end dialogue at 20081030110940
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110940
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110940
...end dialogue at 20081030110941
...STARTED at 20081030110941.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030110941
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030110941
...begin dialogue at 20081030110941
...end dialogue at 20081030110945
...CANCELED at 20081030110945.
CHANGES.LOG
MILESTONE
"BEG_IR"
"STO_IR"
"20081030104921"
"20081030104921"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105012"
"20081030105012"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105013"
"20081030105013"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105013"
"20081030105013"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105015"
"20081030105015"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105034"
"20081030105034"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105039"
"20081030105039"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105039"
"20081030105039"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105104"
"20081030105104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030105104"
"20081030105104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105626"
"20081030105626"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105627"
"20081030105627"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105627"
"20081030105627"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105630"
"20081030105630"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105711"
"20081030105711"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105715"
"20081030105715"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105715"
"20081030105715"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105719"
"20081030105719"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030105719"
"20081030105719"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105752"
"20081030105752"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105753"
"20081030105753"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105753"
"20081030105753"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105756"
"20081030105756"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105814"
"20081030105814"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105818"
"20081030105818"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105818"
"20081030105818"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110026"
"20081030110026"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110026"
"20081030110026"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110034"
"20081030110034"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110035"
"20081030110035"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110035"
"20081030110035"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110038"
"20081030110038"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110054"
"20081030110054"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110104"
"20081030110104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110104"
"20081030110104"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110123"
"20081030110123"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110134"
"20081030110134"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110140"
"20081030110140"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110140"
"20081030110140"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110143"
"20081030110143"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110149"
"20081030110149"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110154"
"20081030110154"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110154"
"20081030110154"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110328"
"20081030110328"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110328"
"20081030110328"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110337"
"20081030110337"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110342"
"20081030110342"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110342"
"20081030110342"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110858"
"20081030110858"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110859"
"20081030110859"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110859"
"20081030110859"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110901"
"20081030110901"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110937"
"20081030110937"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110940"
"20081030110940"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110940"
"20081030110940"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110945"
"20081030110945"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110945"
"20081030110945"
"0"
"0"
"0"
"0"
TOOLOUT.LOG
SAPup> Starting subprocess disp+work.exe with id 732 at 20081030103432
EXECUTING C:\usr\sap\AHQ\SYS\exe\run\disp+work.exe -V
disp+work information
kernel release 46D
kernel make variant 46D
DBMS client library SQL_Server_7.00
DBSL shared library version 46D.00
compiled on NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00
compile time Jan 14 2008 08:47:41
update level 0
patch number 2364
source id 0.2364
supported environment
database (SAP, table SVERS) 46A
46B
46C
46D
DBMS server MSSQL 6.5.213 or higher
MSSQL 7.0.1 or higher
operating system Windows NT 4.0
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
System build information:
LCHN : 955407
disp+work patch information
( 0.001) Correct cursor preservation (I) (note 307486)
( 0.002) SU53 reports always 'Check on S_TCODE SU53' (note 310513)
( 0.003) PXA: Emergency mode (note 307976)
( 0.004) Correct shortcut handling under EASY ACCESS (note 309791)
( 0.005) POST driver: no set locale (note 310076)
( 0.006) ASSIGN attr+off(len) TO <fs> (note 302214)
( 0.007) Contextmenu for tableview cells (note 309755)
( 0.008) Rfc and full screen (note 308383)
( 0.009) Dropdown listbox performance (note 307795)
( 0.010) Correct cursor preservation (II) (note 307486)
( 0.011) Spool-Patch-Collection 26 (note 92482)
( 0.012) Correct cursor preservation (III) (note 307486)
( 0.013) Correct cursor preservation (IV) (note 307486)
( 0.014) Core in dyCheckRadioGroups() (note 308958)
( 0.019) STAT: DB Resonse Time for SQL Server (note 310288)
( 0.021) Rfc authority problem (note 93254)
( 0.024) RFC extended trace information (note 311386)
( 0.027) CALL SCREEN: error 'MISMATCH DYNPRO NAME / CONTENT' (note 310186)
( 0.028) ABAP: OO-Transactions and event LOAD-OF-PROGRAM (note 312244)
( 0.029) Profile 'abap/oo_warn' suppress OO-context errors (note 182767)
( 0.031) Occasional core when reading statistics file (note 313669)
( 0.032) ABAP: unnecessary class-constructor calls (2) (note 213622)
( 0.035) Corrections in errormessage handling (sapdext) (note 312252)
( 0.040) TSTC: transaction is not an oo-transaction (note 315037)
( 0.044) F4 on checkbuttons (note 312258)
( 0.045) Core in moveleft() (note 312418)
( 0.046) Error trace: invalid dynpro dynpabsv.c 3490 (note 314373)
( 0.047) Error trace: memory conflict diagscrol.c (note 313967)
( 0.048) Iterator problem with iXML collections fixed (note 315119)
( 0.050) Invocation of not-implemented methods (note 314064)
( 0.051) Core at dynamic invoke with interface reference (note 314487)
( 0.052) GW: Avoid multiple send (note 314495)
( 0.053) Spool-Patch-Collection 27 (note 92482)
( 0.054) Printing via e-mail (note 311037)
( 0.055) User default time zone from TTZCU-TZONEDEF (note 314300)
( 0.056) Bad batch job statistic (note 315147)
( 0.057) LOOP AT SCREEN: counter field increased (note 314516)
( 0.058) Missing init. in temse (note 314094)
( 0.065) GW: shared block leak with multiple reg programs (note 309969)
( 0.067) RFC: load balancing over SAPRouter (note 316221)
( 0.068) No debugging until login while remote debugging (note 316456)
( 0.069) Open SQL: INTO CORRESPONDING with JOINs (note 315747)
( 0.071) Support 'Windows NT 5.1' (note 316188)
( 0.072) Destroyed dynpro load (note 207817)
( 0.073) Error in spool entry queue (note 316148)
( 0.074) mySAP.com workplace single signon enabling (note 177895)
( 0.075) Sap statistic destroys eye catcher (note 317178)
( 0.076) Syslog messages while printing (note 316630)
( 0.077) Performance optimization for list boxes (note 214806)
( 0.078) Loop in batch input (note 316686)
( 0.080) Loop in batch input 2 (note 316686)
( 0.081) Don't block s-messages in local update processing (note 312252)
( 0.084) Correct error message in conversion exit 'ALPHA' (note 318027)
( 0.085) Destroyed dynpro load (note 207817)
( 0.086) Print from rfc server (note 318692)
( 0.087) Unknown syntax errors after changing the kernel (note 142888)
( 0.088) RFC: error discarding unneeded tables (note 319634)
( 0.089) Sapstartsrv handle service stop and shutdown correctly (note 142100)
( 0.091) GW: Nonblocking connect problems (note 319675)
( 0.092) Tstc: transaction is not an oo-transaction (note 315037)
( 0.093) Coredump with 'INSERT LINES OF ...' (note 142100)
( 0.094) Corrupted cluster item displayed (note 318904)
( 0.096) BDC: Enable input in list screens (note 212569)
( 0.099) Hanging apps after writing core (note 320168)
( 0.102) Syntax warning for literals crossing line boundaries (note 319328)
( 0.103) Generation error at statement 'IF itab IS SUPPLIED' (note 321069)
( 0.105) Spool-Patch-Collection 28 (note 92482)
( 0.109) Several errors within footline (note 312848)
( 0.111) Check dynpro processor state (note 301406)
( 0.112) Memory usage roll area 0+1 (note 322070)
( 0.113) Sapstartsrv: GetProcessList exception, librfc32 delayload (note 142100)
( 0.114) Rfc call and default fontsize data (note 323342)
( 0.115) OBJECTS_NOT_COMPATIBLE with READ TABLE (note 323039)
( 0.116) Random syntax errors (MOVE-CORRESPONDING) (note 207149)
( 0.117) SKIP 1ST SCREEN: ignore GRAPH dynpros (note 317917)
( 0.118) Japanese IXML, table TCP0F (note 301406)
( 0.119) SE30 errors (note 170470)
( 0.121) Correct call of POV modules for comboboxes (note 323141)
( 0.122) Exception in NiExit (note 319675)
( 0.123) GW: No restart during db reconnect (note 321863)
( 0.125) TX variants: correct reset field input (note 325275)
( 0.126) ITS_LOGIN_CHECK_RFC rejected as XXPASS caller (note 324758)
( 0.129) Error message: correct cursor setting (note 318292)
( 0.130) Check dynpro processor state (II) (note 301406)
( 0.131) Correct SET FOCUS CONTROL for NO-PAI (note 322455)
( 0.132) Init tcview components (note 323686)
( 0.133) BDC: No loosing track of data during F4-Help (note 323061)
( 0.136) BDC: Avoid duplicate messages in log (note 324490)
( 0.138) Resize: docking control - dynpro (note 323974)
( 0.139) GW: Secinfo for start of external programs (note 323925)
( 0.140) False error texts for workplace ticket logon (note 325222)
( 0.141) "user locked" for logon attempt at CUA master system (note 325213)
( 0.143) HPL2 driver: unreadable text for green/red (note 323460)
( 0.146) Loop of dispatcher (note 325559)
( 0.148) Spool-Patch-Collection 29 (note 92482)
( 0.149) Control Framework global flush mode (note 316243)
( 0.150) TX variants: correct reset field input (II) (note 325275)
( 0.152) Em detach before process restart (note 326876)
( 0.153) Workplace: multiple logon popup for wingui sessions (note 326604)
( 0.154) ABAP Debugger: Rollback before restart (note 325903)
( 0.156) Conversion X to STRING (note 327086)
( 0.158) Bugfix new-page print on + message (note 107321)
( 0.159) IXML: coredump when parsing empty XML document (note 326888)
( 0.160) Resume in current screen after returning from exit module (note 327803)
( 0.161) SORT: close extract file, if runtime error occurs (note 328691)
( 0.162) Adapt ABAP runtime to new signal handling (note 329091)
( 0.163) BDC: corresponding screen to bsdup-entry in dybimsgi (note 330071)
( 0.164) Stat-file is not deleted in old 4.6 releases (note 329603)
( 0.169) Do not change loopheader during help processing (note 330761)
( 0.171) Disabling GUI in aRFC when called from tRFC (note 329811)
( 0.174) Test dynpro: do not call POV modules (note 332538)
( 0.175) No commit during wait in update task (note 332077)
( 0.176) Printing frames in text mode (note 320792)
( 0.177) Spool-Patch-Collection 30 (note 92482)
( 0.178) TSTC transaction is not an oo-transaction (note 315037)
( 0.179) RFC-Import of deep structures failed (note 333694)
( 0.180) STRING_BAD_REF in control break processing (note 332663)
( 0.181) Increase structure stack (note 332500)
( 0.184) PXA: initialization (note 160875)
( 0.185) PXA_NO_FREE_SPACE (note 147568)
( 0.186) Update task: increase vb2Cnt for update type 5 (note 333878)
( 0.187) Correct handling of empty loop lines (note 334886)
( 0.188) TX variants: correct reset field input (III) (note 325275)
( 0.189) EmHyperContextCreate() => alreday exists (note 334389)
( 0.192) Default cursor: reset cursor offset (note 334951)
( 0.194) Invalid client index of sap gateway (note 333949)
( 0.195) RFC authority check failed (note 93254)
( 0.196) BDC: No loosing track of data after F4-Help (note 323061)
( 0.197) ABAP: optimized dynamic SELECT clauses (note 324772)
( 0.198) Bugfix new-page print on + message (note 107321)
( 0.199) Bugfix displaying printer name after print (note 107321)
( 0.201) Error recovery (in ni datagram) after workprocess-restart (note 335967)
( 0.207) Diag: correct list size (note 337298)
( 0.209) GW: memory block freed twice (note 337957)
( 0.210) Incorrect logon ticket expiration calculation (note 337794)
( 0.218) Errortrace: invalid offset (dybasfield.c 95) (note 337820)
( 0.219) Deactivate LIST TO MEMORY on selection screen (note 313558)
( 0.220) Dbbmng0.c: generic invalidation of shared buffer objects (note 338451)
( 0.221) Itab operations on tableview-controls (note 339270)
( 0.222) GW: RFC attached gui (note 337425)
( 0.223) ASSIGN: set output length accurately (note 338925)
( 0.224) Tabstrip pages and wrong scroll offset (note 339469)
( 0.225) Set pf-status excluding and rollout (note 338954)
( 0.226) Auth problems with 20 characters transactions (note 339913)
( 0.227) Batch input: new algorithm for QID-generation (note 338246)
( 0.229) Inappropriate short dump ZDATE_ILLEGAL_LOCTIME (note 323954)
( 0.230) Print of a list dumps (note 338994)
( 0.231) Archive device (note 339659)
( 0.232) S-messages in CTU-log (note 339302)
( 0.238) Correct trace SET PARAMETER (note 340096)
( 0.240) Print of a list dumps (II) (note 338994)
( 0.242) Start Row Start Column for Dynproresizing (note 351685)
( 0.243) GW: Bad em context handling (note 351526)
( 0.244) SORT AS TEXT: length too short (note 350526)
( 0.245) Get cursor information on pushbutton (note 351890)
( 0.247) ABAP: Slin default check; type I vs. type P (note 351976)
( 0.248) GW: CCMS Monitoring Patch-Collection 1 (note 202591)
( 0.249) Short dump CALL_TRANSACTION_LOCKED (note 350360)
( 0.250) Controls and list processing (note 352065)
( 0.251) Blanks in authorization values (note 207196)
( 0.252) Tableview line/column selection (note 350363)
( 0.253) Spool-Patch-Collection 31 (note 352269)
( 0.254) Decrease and increase for dynpro and window (note 352542)
( 0.255) ABAP Debugger: Avoid DEBUGGER_ILLEGAL_VALUE in RFC-Debug. (note 182989)
( 0.256) Incomplete DATA in D010INC and D010TAB (note 352480)
( 0.257) Diag: warning and resize (note 212524)
( 0.258) Workplace: provide logon ticket for X.509 logon (note 350776)
( 0.260) StartRow StartColumn for Dynproresizing (note 351685)
( 0.261) EmHyperContexts: reduce memory consumption (note 353103)
( 0.262) Invalid focus memory (note 353496)
( 0.263) EmHyperContexts: reduce memory consumption (II) (note 353103)
( 0.266) Slow SetQoS due to unnecessary DNS query (note 180940)
( 0.268) ABAP-Exception-Handling: Internal State-Stack (note 350146)
( 0.269) BDC: no user command allowed on SAPMSYST 0040 (note 163639)
( 0.270) Wrong portability warnings from extended syntax check (note 353681)
( 0.271) Passing EXP-IMP parameters in RFC calls (note 352629)
( 0.272) Spool-Patch-Collection 31a (note 352269)
( 0.273) Modal level and suppress dialog (note 355616)
( 0.274) DBIF_RSQL_INVALID_REQUEST with very old cluster records (note 353651)
( 0.275) Horizontal radiobutton groups (note 355260)
( 0.276) Proportional cut for variable Dynpro-objects (note 351685)
( 0.277) Hostname resolution blocks processes (note 356788)
( 0.278) Tabstrip pages and wrong scroll offset (note 339469)
( 0.280) Core in DiagiTableHeader (note 159421)
( 0.281) GW: Bad statistic after summer time switch (note 353893)
( 0.283) CPIC-Timeout for frontend printing (note 352269)
( 0.284) List scrollbar and docking control (note 357241)
( 0.285) Sy-SubRc 8 with SELECT SINGLE on logic cluster table (note 355714)
( 0.287) Missing entry in table FIDO (note 357019)
( 0.290) BDC: conversion of old batch-input logfiles (note 356758)
( 0.293) Invalid sapgui data (note 358681)
( 0.294) Reading of ASTAT records fails in 4.6D (note 358532)
( 0.295) ABAP: Loop in function LookForFref (note 357698)
( 0.297) Muliconnect error reporting (note 358171)
( 0.298) RFC: data dependent read error (note 358557)
( 0.300) Protect against 'error in datastream' (note 359511)
( 0.301) Treatment of looplines by loc. horiz. resize (note 212861)
( 0.302) Initial values with DynpValuesUpdate (note 359873)
( 0.303) ABAP: warning for duplicate keys removed (note 359114)
( 0.304) Core dump when calling RfcClose (note 359865)
( 0.306) Suppression of unnecessary syslog messages (note 359523)
( 0.308) System Core Dump with F4-Button in R/3-Dialog(modal) setting (note 212861)
( 0.309) Core dump in RFC engine (note 353136)
( 0.311) Start EASY-ACCESS only for dialog sessions (note 360980)
( 0.314) Check if dynpro exists before access it (note 361120)
( 0.315) Optimize concatenate for STRING (note 327185)
( 0.317) New RFC logon method 'external identification' (note 358469)
( 0.319) List scrolling: last line missing (note 362181)
( 0.320) GW: Set locale in update task (note 360971)
( 0.321) SORT: avoid EXSORT_TOO_MANY_PARALLEL_SORTS (note 361532)
( 0.322) Extended syntax check with BETWEEN ... AND (note 361470)
( 0.323) ICMAN fails to open event flags for HTTP connections (note 360696)
( 0.326) Open SQL: improved statement generation for UPTO (note 361392)
( 0.327) Check (ABAP_ASSERT) in ASSIGN to avoid core (note 363059)
( 0.329) Bad NOWP request (note 365156)
( 0.330) ABAP; SCAN STRUCTURE: error in SELECT-ENDSELECT logic (note 363992)
( 0.331) Native SQL: return code for EXECUTE PROCEDURE (note 364707)
( 0.332) Semaphore error in ASTAT (note 363499)
( 0.333) Printing with format LETTER (note 363624)
( 0.334) Problems with missing or short quickinfo (note 363394)
( 0.335) Parameters in macro _splitpathU swapped (note 365337)
( 0.339) Modified length mismatch (note 207817)
( 0.340) Problems with missing or short quickinfo (2) (note 363394)
( 0.341) Errortrace invalid value dybas.c 0179 (note 337820)
( 0.342) Errortrace invalid parameter dynpdiag 1131 (note 337820)
( 0.343) Errortrace dytracefocus invalid container (note 353496)
( 0.346) Spool-Patch-Collection 32 (note 352269)
( 0.347) Invalid focus memory 2 (note 353496)
( 0.348) Prevent duplicate RFC struct parameter transmission (note 365916)
( 0.351) Native SQL: memory leak for stored procedures (note 367509)
( 0.352) Resizing side to side and one below other Dynpro-Objects (note 367811)
( 0.353) Check ztta/dynpro_area (note 167229)
( 0.354) Problems with missing or short quickinfo (3) (note 363394)
( 0.355) GW: Bad NOWP request II (note 365156)
( 0.358) Breakpoint in ABAP Debugger at CONTINUE (note 368433)
( 0.359) Errortrace: should not happen (dycuahlp 1661) (note 369415)
( 0.360) Reactivate suspended clients (note 367384)
( 0.361) Disable persistent trace for RFC-Library (note 364034)
( 0.365) Large file support (note 330992)
( 0.366) IMPORT: avoid IMPORT_INIT_DECOMPRESS_FAILES (note 370053)
( 0.367) BAPI_USER_CHANGE returns wrong/blank error message (note 369761)
( 0.368) ABAP debugger: field display and global TABLES-parameters (note 370103)
( 0.369) ABAP debugger: empty source display (note 370717)
( 0.370) Saplicense: license buffer not initialized (note 371301)
( 0.371) List token in SELECT (note 370587)
( 0.373) GW: Duplicate conversation ids in gateway work processes (note 371481)
( 0.375) Dynamic Type at CREATE DATA (note 371607)
( 0.376) Printing selection page & long transaction (note 370661)
( 0.377) Library iXML: correction of CDATA size problem (note 371846)
( 0.378) DEC field input for none DDIC fields (note 373047)
( 0.379) Spool-Patch-Collection 33 (note 352269)
( 0.380) C-Call ABAP_CALLSTACK (note 371779)
( 0.381) Loop during decompression of corrupted Sources/Loads (note 374200)
( 0.382) Extended table compression for certain RFC connections (note 373452)
( 0.383) SORT: avoid EXSORT_TOO_MANY_PARALLEL_SORTS and recursion (note 361532)
( 0.384) PostScript error with TrueType fonts (note 373604)
( 0.385) XML-Import failed after empty structure tags (note 374447)
( 0.386) Disable QoS support by default (note 180940)
( 0.387) Message display type (note 368333)
( 0.389) DEC field input for none DDIC fields II (note 373047)
( 0.390) Long running report (note 373343)
( 0.391) Illegal request looping in dispatcher (note 373345)
( 0.394) Fix printing selection page & long transaction (note 370661)
( 0.397) Reserve address space for Extended Memory (note 373326)
( 0.399) VALUE /namespace/const (note 371720)
( 0.402) DYNG: get translated buttontexts from D021T (note 363394)
( 0.403) Correct returncode for SET_DYNP_FIELD_VALUE (note 374941)
( 0.404) Refresh control from screen (note 375251)
( 0.406) Receive result of aRFC (note 375356)
( 0.410) Disp+Work doesn't start up (note 376242)
( 0.414) DEC field input for none DDIC fields (note 373047)
( 0.415) Core dump in GenViewGetPbagRudi (note 375055)
( 0.416) DBIF_REPO_PART_NOT_FOUND during Garbage-Collection (note 374884)
( 0.417) Control focus correction (note 374510)
( 0.418) Title problems (note 374560)
( 0.419) Window width > 255 cause list problems (note 375856)
( 0.420) IS REQUESTED/SUPPLIED and RETURNING parameter (note 375329)
( 0.423) DEC field input for none DDIC fields (note 373047)
( 0.424) Core in appl info (note 376906)
( 0.425) Core in DiagIConvert, if trace level 3 (note 377184)
( 0.426) Correction for Spool-Patch-Collection 33 (note 352269)
( 0.429) Change default for cursor preservation (note 378706)
( 0.430) Error trace from dyariftb() (note 378093)
( 0.431) Enqueue table overflow, syslog message corrected (note 378682)
( 0.433) DEC field input for none DDIC fields (note 373047)
( 0.434) Illegal chars set spooljob to error (note 379119)
( 0.435) Debugger: data references and tables of type I (note 378838)
( 0.436) Set DISPLAY AGAIN in TH (note 380164)
( 0.437) Prepare: several mySAP.com components in one DB (note 379572)
( 0.439) Workplace: disable password logon (note 379081)
( 0.445) DiagSetCodepage() failed (note 382240)
( 0.446) Sapstartsrv update available.log on Start/Stop (note 142100)
( 0.447) Ldapreg: ITS LDAP registration (note 379691)
( 0.448) GW: Wp stuck in PRIV mode (note 381870)
( 0.449) Too many invalidations on USRBF2 (note 319727)
( 0.450) Correct static focus on subscreens (note 380809)
( 0.451) Correct HOLD DATA message (note 381528)
( 0.452) Trace DYNP_SET/GET_STATUS (note 381694)
( 0.453) Init screen buffer parameters (note 382032)
( 0.454) No core in dypov_treatDpovtabRow (note 381221)
( 0.455) Server shutdown after bind error (note 382440)
( 0.457) Handling of fatally corrupted cluster records (note 381968)
( 0.466) EXPORT: dynamic export of strings (note 384694)
( 0.467) Message in help: no core dump (note 384639)
( 0.468) Pull up other objects down of table after TABLE_PBO_DONE (note 383033)
( 0.469) Tablecontrol init and context (note 373977)
( 0.470) Correction of the nls locale check tool (note 40815)
( 0.471) GW: Missing aRFC response (note 384015)
( 0.472) GW: Core during write of statistic (note 384433)
( 0.473) Wp stuck in PRIV mode (II) (note 381870)
( 0.474) Shared Pool disturbed corrected (note 384810)
( 0.477) SORT/EXTRACT: large file support (note 384257)
( 0.478) Codepage problem: sap8000 (shift_jis) (note 384947)
( 0.479) Active/Inactive-Handling (note 385628)
( 0.480) Sporadic logon failures in batch processing (note 385894)
( 0.483) GW: Free unallocated memory (note 387747)
( 0.484) SORT/EXTRACT: large file support (II) (note 384257)
( 0.487) Open SQL: several minor errors (note 386783)
( 0.489) RABAX no dbrollback and dbcommit at core (note 386268)
( 0.490) C-call DY_GET_S_MESSAGE available (note 383089)
( 0.491) Correct I message for batch input (note 386661)
( 0.492) Do not skip message popup (note 385147)
( 0.493) Async RFC: set size of full screen (note 385132)
( 0.494) Correct error messages for CALL SUBSCREEN (note 386674)
( 0.495) Logon tickets slightly too long valid (note 387595)
( 0.496) Format error during output of empty strings (note 385796)
( 0.497) RFC: patch collection (46D) (note 387366)
( 0.498) Method calls in arithmetics (note 387066)
( 0.499) Reallocate the number of boxes for resizing (note 388988)
( 0.500) Generate correct forkey selects in dynpro (note 388699)
( 0.501) Destroyed dynpro load (note 207817)
( 0.502) Open a new audit file next day after maxsize event (note 321148)
( 0.503) Delete audit files with extended filenames (SM18) (note 370829)
( 0.504) DiagSetCodepage() failed (note 382240)
( 0.507) Missing arfc response (II) (note 384015)
( 0.508) Generation of very long sources: repeating END_INBUF (note 389041)
( 0.509) Correct hold control framework focus (note 389364)
( 0.510) BDC: F1 or F4-request in bdcdata (note 323061)
( 0.511) Overflow of memory (note 370661)
( 0.512) PARAMETERS referencing a named DDIC include (note 389940)
( 0.515) DB2/390: default dbs/db2/use_hints=abap->1 (note 162034)
( 0.516) Recovery from NI-error after WP-restart (note 335967)
( 0.517) Avoid RFC server timeout (note 390219)
( 0.522) Avoid core in ABAP debugger by bad string references (note 391169)
( 0.523) Keep scrollposition (note 391871)
( 0.524) ABAP debugger: Display header for bad object reference (note 391187)
( 0.530) Enqueue traces during transaction reset (note 392873)
( 0.531) Garbage-Collection beyond 600MB (note 393378)
( 0.534) Enqueue traces during transaction reset (II) (note 392873)
( 0.535) CPICFAIL in smq1 after kernel upgrade (note 394549)
( 0.536) APO: correct internal table processing in COM routines (note 395695)
( 0.537) DYNPRO_FIELD_CONVERSION on Get Parameter (output) (note 395450)
( 0.538) Core in dyGetDataR() (note 395299)
( 0.540) Core in DpFreeResource after restart (note 394454)
( 0.542) Restore of sy.datar when popping screen (note 393511)
( 0.543) Open SQL: Memory leak when updating with %_HINTS (note 393897)
( 0.547) List scrolling: last line missing(2) (note 362181)
( 0.548) DiagSetCodepage() failed (note 382240)
( 0.549) Limit on number of sessions per logon (note 392369)
( 0.552) ABAP: error in string access with offset or length (note 396800)
( 0.553) Wrong portability warnings from SLIN (note 353681)
( 0.555) SY-VLINE in Thai on AS/400 (note 391627)
( 0.557) Unsuccessful READ on a SORTED TABLE (note 395205)
( 0.559) Sapstartsrv shutdown one process after the other (note 142100)
( 0.560) GW: COMPUTE_INT_TIMES_OVERFLOW in SAPLSALK (note 395671)
( 0.561) MS: improved trace features (note 396750)
( 0.562) ABAP: PERFORM .. CHANGING VALUE(<itab-line>-comp) (note 399078)
( 0.564) No hint generation in case of SELECT SINGLE (note 397170)
( 0.565) READ TABLE with attribute keys (note 399263)
( 0.566) Error in msg-server communication (note 398525)
( 0.568) Spool-Patch-Collection 34 (note 352269)
( 0.569) GW: Destroyed update start message (note 157840)
( 0.576) ABAP debugger: display active calls (note 399920)
( 0.577) ABAP debugger: display of interface aliases (note 399915)
( 0.578) ABAP: SET LOCALE and SUBMIT / CALL TRANSACTION (note 399918)
( 0.579) Enforce minimal patch level for database library (note 400216)
( 0.581) Ticket logon resets initial flag (password) (note 402076)
( 0.582) New translations cause locks on D020 (note 36795)
( 0.585) Catching of problems during string <-> char handling (note 402340)
( 0.586) GET LOCALE: language incorrect (note 402801)
( 0.587) Icons are not printed properly (note 402967)
( 0.588) Em context destroyed after exception (note 403562)
( 0.589) Dummy call: super constructor (note 401553)
( 0.590) Visibility of local types (note 401910)
( 0.591) Coredump with READ TABLE and float attributes (note 400516)
( 0.592) Offset/length specifiers in a table key definition (note 402255)
( 0.594) Resize: docking control - dynpro (note 323974)
( 0.598) Avoid inconsistent overall source time stamp (note 405821)
( 0.599) PXA: correct unfound object cache & statistic counters (note 406075)
( 0.600) SY-VLINE and JAVASCRIPT in Thai on AS/400 (note 391627)
( 0.601) Avoid inconsistent overall source time stamp (II) (note 405821)
( 0.605) RFC_DEBUGGING_NO_DIALOG_USER (note 407471)
( 0.606) Core in dyAbapGetContainerPosition (note 405930)
( 0.607) X.509 certificate logon: timezone not set (note 408601)
( 0.608) Unsuccessful READ on a SORTED TABLE (II) (note 409175)
( 0.609) IPC, max shm size detection accelerated (note 406738)
( 0.610) Graphical characters and page borders (note 406673)
( 0.611) SE30: close measurement on /n (note 381500)
( 0.612) Detail selection does not work correct (note 400090)
( 0.613) Negative value for hdcurrow is not permitted (note 352542)
( 0.624) Cutting terminal names (note 412628)
( 0.625) Update debugging (note 336925)
( 0.626) Control for Table-Control in Resizing is wrong (note 388988)
( 0.627) Correct treatment of field symbols (note 406306)
( 0.629) Init params of ab_ListGetFieldName (local field symbols) (note 413506)
( 0.630) Open SQL: more than 255 alias names in SELECT list (note 411136)
( 0.631) Open SQL: wrong SY-DBCNT for FETCH NEXT (note 412399)
( 0.632) Core in db_blob (note 412063)
( 0.633) Core in DiagGetWindowDimension (note 412168)
( 0.634) Core by 'Display current statement' in debugger (LREF) (note 411673)
( 0.636) Coredump in PfOpenScratchFile (note 414242)
( 0.637) VALUE class=>const (note 413384)
( 0.639) Hebrew Sapscript printing causes signal 11 (note 155261)
( 0.640) Workarea change in case of SELECT SINGLE with SY-SUBRC 4 (note 410175)
( 0.641) Function DB_DBSCHEMA returns correct result now (note 411971)
( 0.642) Wrong syntax error at literals in macros (note 411757)
( 0.643) Change of an interface (note 411769)
( 0.647) Dbbuf: restrict rtbb/buffer_length to 200000 [kB] (note 414220)
( 0.649) Inserted option WAN_CONN into RfcOpenEx (note 415169)
( 0.650) SU01: error texts for invalid passwords (note 369761)
( 0.651) CONVERT TIME STAMP... for 9999/31/12 23:59:59 (note 401610)
( 0.653) Text of check- and radiobuttons with icon (note 414703)
( 0.654) MESSAGE ... INTO no rabax at message x (note 408740)
( 0.655) New list line at program load (note 412142)
( 0.656) Displaying frames in lists (note 412787)
( 0.657) Selection page and empty report (note 370661)
( 0.658) VMIT (NT): higher precision (note 414135)
( 0.659) Runtime error DSTEP_WRONG_PROGRAM (note 416350)
( 0.660) Core in csulzh.c (note 413899)
( 0.661) Msg_server accept ad-msg opcode 60 AD_SELFIDENT (note 415447)
( 0.662) Highlighting in Hebrew list printing (note 353987)
( 0.663) Extended syntax check with BETWEEN ... AND (2) (note 361470)
( 0.664) Breakpoint at (RFC) function module (note 414952)
( 0.665) Don't break iXML because of missing character (note 410929)
( 0.667) WP opmode switch (note 415840)
( 0.674) Msg_server accept ad-msg opcode 60 AD_SELFIDENT (note 415447)
( 0.675) Duplicate key in VBMOD (note 416961)
( 0.676) Trace spa/gpa memory overflow (note 34533)
( 0.677) Dbbuf: check rtbb/buffer_length and rtbb/max_tables (note 414220)
( 0.678) Display '?' in DropdownListboxes (note 417405)
( 0.679) Correct call dialog for system messages (I) (note 416053)
( 0.680) Correct call dialog for system messages (II) (note 417096)
( 0.682) Memory leak in short storage (MEMSAV) (note 419819)
( 0.683) Spooler C-call info msg in trace (note 418740)
( 0.684) Dithering of color bitmaps (note 410727)
( 0.685) Standalone enqueue server prepared (note 419283)
( 0.686) Correction of the nls locale check tool (note 40815)
( 0.687) System Core Dump in C-Destructors of ABAP Objects (note 416163)
( 0.688) QHi Experts,
After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
Thanks -
GeoRaptor 3.0 for SQL Developer 3.0 and 2.1 has now been released
Folks,
I am pleased to announce that, after 5 months of development and testing, a new release of GeoRaptor for SQL Developer 2.1 and 3.0 is now available.
GeoRaptor for SQL Developer 3 is available via the SQL Developer Update centre. GeoRaptor 3 for SQL Developer 2.1 is being made available
via a download fro the GeoRaptor website.
No release notes have been compiled as the principal developer (oops, that's me!) is currently busy doing real work for a change (another 3 weeks), earning a living
and keeping the wolves at bay. More extensive notes (with images) will be compiled when I get back. (Unless anyone is offering! See next.)
We are still looking for people to:
1. Provide translations of the English dialog menus etc.
2. Write more extensive user documentation. If you use a particular part of GeoRaptor a lot and think
you have found out all its functionality and quirks, contact us and offer to write a few pages of
documentation on it. (Open Office or Microsoft Word is fine.) Easiest way to do this is to simply
make screen captures and annotate with text.
3. Conduct beta testing.
Here are the things that are in the new release.
New functionality:
Overhaul of Validation Functionality.
1. User can specify own validation SELECT SQL as long as it returns three required columns. The SQL is thus totally editable.
2. Validation update code now allows user to associate a PL/SQL function with an error number which is applied in the UPDATE SQL.
3. UPDATE SQL can use WHERE clause of validation SELECT SQL (1) to update specific errors.
NOTE: The generated UPDATE statement can be manually edited. It is NEVER run by GeoRaptor. To run any UPDATE, copy the statement
to the clipboard and run in an appropriate SQL Worksheet session within SQL Developer.
4. Main validation table allows:
a. Sorting (click on column header) and
b. Filtering.
c. Copying to Clipboard via right mouse click sub menu of:
- Geometry's SDO_ELEM_INFO array constructor.
- SDO_GEOMETRY constructor
- Error + validation string.
d. Access to Draw/Zoom functions which were previously buttons.
e. Added a new right mouse click menu "Show Feature's Individual Errors" that gathers up all the errors
it can process - along with the ring / element that is host to the error (if it can) - and displays
them in the Attribute/Geometry tabs at the bottom of the Map Window (where "Identify" places its results).
The power of this will be evident to all those who have wanted a way of stepping through errors in a geometry.
f. Selected rows can now be deleted (select rows: press <DELETE> key or right mouse click>Delete).
g. Table now has only one primary key column, and has a separate error column holding the actual error code.
h. Right mouse click men added to table menu to display description of error in the new column (drawn from Oracle documentation)
i. Optimisations added to improve performance for large error lists.
5. Functionality now has its own validation layer that is automatically added to the correct view.
Access to layer properties via button on validation dialog or via normal right mouse click in view/layer tree.
Improved Rendering Options.
1. Linestring colour can now be random or drawn from column in database (as per Fill and Point colouring)
2. Marking of SDO_GEOMETRY objects overhauled.
- Ability to mark or LABEL vertices/points of all SDO_GEOMETRY types with coordinate identifier and
option {X,Y} location. Access is via Labelling tab in layer>properties. Thus, coordinate 25 of a linestring
could be shown as: <25> or {x,y} or <25> {x,y}
- There is a nice "stacked" option where the coordinate {x,y} can be written one line below the id.
- For linestrings and polygons the <id> {x,y} label can be oriented to the angle between the vectors or
edges that come in, and go out of, a vertex. Access is via "Orient" tick box in Labelling tab.
- Uses Tools>Preferences>GeoRaptor>Visualisation>SDO_ORDINATE_ARRAY bracket around x,y string.
3. Start point of linestring/polygon and all other vertices can be marked with user selectable point marker
rather than previously fixed markers.
4. Can now set a NULL point marker by selecting "None" for point marker style pulldown menu.
5. Positioning of the arrow for linestring/polygons has extra options:
* NONE
* START - All segments of a line have the arrow positioned at the start
* MIDDLE - All segments of a line have the arrow positioning in the middle.
* END - All segments of a line have the arrow positioning in the END.
* END_ONLY - Only the last segment has an arrow and at its end.
ScaleBar.
1. A new graphic ScaleBar option has been added for the map of each view.
For geographic/geodetic SRIDs distances are currently shown in meters;
For all SRIDs an attempt is made to "adapt" the scaleBar units depending
on the zoom level. So, if you zoom right in you might get the distance shown
as mm, and as you zoom out, cm/m/km as appropriate.
2. As the scaleBar is drawn, a 1:<DEMONINATOR> style MapScale value is written
to the map's right most status bar element.
3. ScaleBar and MapScale can be turned off/on in View>Properties right mouse
click menu.
Export Capabilities.
1. The ability to export a selection from a result set table (ie result of
executing ad-hoc SQL SELECT statement to GML, KML, SHP/TAB (TAB file
adds TAB file "wrapper" over SHP) has been added.
2. Ability to export table/view/materialised view to GML, KML, SHP/TAB also
added. If no attributes are selected when exporting to a SHP/TAB file, GeoRaptor
automatically adds a field that holds a unique row number.
3. When exporting to KML:
* one can optionally export attributes.
* Web sensitive characters < > & etc for KML export are replaced with > < & etc.
* If a column in the SELECTION or table/view/Mview equals "name" then its value is
written to the KML tag <name> and not to the list of associated attributes.
- Similarly for "description" -> <description> AND "styleUrl" -> <styleUrl>
4. When exporting to GML one can optionally export attributes in FME or OGR "flavour".
5. Exporting Measured SDO_GEOMETRY objects to SHP not supported until missing functionality
in GeoTools is corrected (working with GeoTools community to fix).
6. Writing PRJ and MapInfo CoordSys is done by pasting a string into appropriate export dialog box.
Last value pasted is remembered between sessions which is useful for users who work with a single SRID.
7. Export directory is remembered between sessions in case a user uses a standard export directory.
8. Result sets containing MDSYS.SDO_POINT and/or MDSYS.VERTEX_TYPE can also be written to GML/KML/SHP/TAB.
Example:
SELECT a.geom.sdo_point as point
FROM (SELECT sdo_geometry(2002,null,sdo_point_type(1,2,null),sdo_elem_info_array(1,2,1),sdo_ordinate_array(1,1,2,2)) as geom
FROM DUAL) a;
SELECT mdsys.vertex_type(a.x,a.y,a.z,a.w,a.v5,a.v6,a.v7,a.v8,a.v9,a.v10,a.v11,a.id) as vertex
FROM TABLE(mdsys.sdo_util.getVertices(mdsys.sdo_geometry(2002,null,null,sdo_elem_info_array(1,2,1),sdo_ordinate_array(1,1,2,2)))) a;
9. A dialog appears at the end of each export which details (eg total) what was exported when the exported recordset/table contains more
than on shape type. For example, if you export only points eg 2001/3001 from a table that also contains multipoints eg 2005/3005 then
the number of points exported, and multipoints skipped will be displayed.
10. SHP/TAB export is "transactional". If you set the commit interval to 100 then only 100 records are held in memory before writing.
However, this does not currently apply to the associated DBASE records.
11. SHP/TAB export supports dBase III, dBase III + Memo, dBase IV and dBase IV + Memo.
Note: Memo allows text columns > 255 characters to be exported. Non-Memo formats do not and any varchar2 columns will be truncated
to 255 chars. Some GIS packages support MEMO eg Manifold GIS, some do not.
12. Note. GeoRaptor does not ensure that the SRID of SDO_GEOMETRY data exported to KML is in the correct Google Projection.
Please read the Oracle documentation on how to project your data is this is necessary. An example is:
SELECT OBJECTID,
CODIGO as name,
NOME as description,
MI_STYLE,
SDO_CS.TRANSFORM(shape,'USE_SPHERICAL',4055) as shape
FROM MUB.REGIONAL;
13. NOTE: The SHP exporter uses the Java Topology Suite (JTS) to convert from SDO_GEOMETRY to the ESRI Shape format. JTS does not handle
circular curves in SDO_GEOMETRY objects you must "stroke" them using sdo_util.arc_densify(). See the Oracle documentation on how
to use this.
Miscellaneous.
1. Selection View - Measurement has been modified so that the final result only shows those geometry
types that were actually measured.
2. In Layer Properties the Miscellaneous tab has been removed because the only elements in it were the
Geometry Output options which have now been replaced by the new GML/KML/etc export capabilities.
3. Shapefile import's user entered tablename now checked for Oracle naming convention compliance.
4. Identify based on SDO_NN has been removed from GeoRaptor given the myriad problems that it seems to create across versions
and partitioned/non-partitioned tables. Instead SDO_WITHIN_DISTANCE is now used with the actual search distance (see circle
in map display): everything within that distance is returned.
5. Displaying/Not displaying embedded sdo_point in line/polygon (Jamie Keene), is now controlled by
a preference.
6. New View Menu options to switch all layers on/off
7. Tools/Preferences/GeoRaptor layout has been improved.
8. If Identify is called on a geometry a new right mouse click menu entry has been added called "Mark" which
has two sub-menus called ID and ID(X,Y) that will add the labeling to the selected geometry independently of
what the layer is set to being.
9. Two new methods for rendering an SDO_GEOMETRY object in a table or SQL recordset have been added: a) Show geometry as ICON
and b) Show geometry as THUMBNAIL. When the latter is chosen, the actual geometry is shown in an image _inside_ the row/column cell it occupies.
In addition, the existing textual methods for visualisation: WKT, KML, GML etc have been collected together with ICON and THUMBNAIL in a new
right mouse click menu.
10. Tables/Views/MViews without spatial indexes can now be added to a Spatial View. To stop large tables from killing rendering, a new preference
has been added "Table Count Limit" (default 1,000) which controls how many geometry records can be displayed. A table without a spatial
index will have its layer name rendered in Italics and will write a warning message in red to the status bar for each redraw. Adding an index
which the layer exists will be recognised by GeoRaptor during drawing and switch the layer across to normal rendering.
Some Bug Fixes.
* Error in manage metadata related to getting metadata across all schemas
* Bug with no display of rowid in Identify results fixed;
* Some fixes relating to where clause application in geometry validation.
* Fixes bug with scrollbars on view/layer tree not working.
* Problem with the spatial networks fixed. Actions for spatial networks can now only be done in the
schema of the current user, as it could happen that a user opens the tree for another schema that
has the same network as in the user's schema. Dropping a drops only the network of the current connected user.
* Recordset "find sdo_geometry cell" code has been modified so that it now appears only if a suitable geometry object is
in a recordset. Please note that there is a bug in SQL Developer (2.1 and 3.0) that causes SQL Developer to not
register a change in selection from a single cell to a whole row when one left clicks at the left-most "row number"
column that is not part of the SELECT statements user columns, as a short cut to selecting a whole row. It appears
that this is a SQL Developer bug so nothing can be done about it until it is fixed. To select a whole row, select all
cells in the row.
* Copy to clipboard of SDO_GEOMETRY with M and Z values forgot has extraneous "," at the end.
* Column based colouring of markers fixed
* Bunch of performance improvements.
* Plus (happily) others that I can't remember!If you find any bugs register a bug report at our website.
If you want to help with testing, contact us at our website.
My thanks for help in this release to:
1. John O'Toole
2. Holger Labe
3. Sandro Costa
4. Marco Giana
5. Luc van Linden
6. Pieter Minnaar
7. Warwick Wilson
8. Jody Garnett (GeoTools bug issues)
Finally, when at the Washington User Conference I explained the willingness of the GeoRaptor Team to work
for some sort of integration of our "product" with the new Spatial extension that has just been released in SQL
Developer 3.0. Nothing much has come of that initial contact and I hope more will come of it.
In the end, it is you, the real users who should and will decide the way forward. If you have ideas, wishes etc,
please contact the GeoRaptor team via our SourceForge website, or start a "wishlist" thread on this forum
expressing ideas for future functionality and integration opportunities.
regards
Simon
Edited by: sgreener on Jun 12, 2011 2:15 PMThank you for this.
I have been messing around with this last few days, and i really love the feature to pinpoint the validation errors on map.
I has always been so annoying to try pinpoint these errors using some other GIS software while doing your sql.
I have stumbled to few bugs:
1. In "Validate geometry column" dialog checking option "Use DimInfo" actually still uses value entered in tolerance text box.
I found this because in my language settings , is the decimal operators
2. In "Validate geometry column" dialog textboxs showing sql, doesn't always show everything from long lines of text (clipping text from right)
3. In "Validate geometry column" dialog the "Create Update SQL" has few bugs:
- if you have selected multiple rows from results and check the "Use Selected Geometries" the generated IN-clause in SQL with have same rowid (rowid for first selected result) for all entries
Also the other generated IN clause in WHERE-clause is missing separator if you select more than one corrective function
4. "Validate geometry column" dialog stays annoyingly top most when using "Create Update SQL" dialog -
A Required COM Add-in program for XL Reporter has not been loaded and ....
A Required COM Add-in program for XL Reporter has not been loaded and prohibits Microsoft Excel from running. For more information, click help.
XL 2007, with the Trust level for macros set to minimum. SBO 2007 PL 42.
Thanks
CharlesRead the following solution from SAP for your problem:
When we open XL Reporter we get an error
message "A required COM add-in program for XL Reporter has not been loaded
and prohibits Microsoft Excel from running." when trying to open a report
definition.
SOLUTION FOR THE PROBLEM:
Reason and Prerequisites
You need to be an administrator on the local machine to add COM add-ins.
Solution
The user should be added as a member of the administrator role on the
local computer the first time you start Excel from XL Reporter the first
time so that the COM addin are registered, then you can remove the user
from the administrator group again.
Manually Loading the XL Reporter Excel COM Add-In
Symptom
If you install Microsoft Office after installing the XL Reporter
application or use another Windows user than the one you used when
installing XL Reporter, you can get an error message.
Reason and Prerequisites
The reason for this is that the report writer COM Add-in has not been
loaded, which prohibits Microsoft Excel from running.
Solution
1. Start Microsoft Excel. If you already have the COM Add-ins command on
the Tools menu, go to step 7.
2. In the Tools menu, choose Customize.
This opens the Customize window.
3. Choose the Commands tab and select Tools from the Categories pane on
the left.
4. In the Command pane on the right, scroll down to the COM Add-ins
command.
5. Select the COM Add-ins command, hold down the mouse button, and drag
COM Add-ins from the Commands pane over to the Tools menu on the Microsoft
Excel men bar. When the Tools menu commands appear, point to where you
want the COM Add-ins command to appear on the menu and release the mouse
button.
6. To close the Customize window, choose Close.
7. On the Tools menu, choose the new COM Add-ins option.
This opens the COM Add-ins window.
8. In the window, choose Add to open the Add Add-in window.
9.Select the IXXLReporter.dll file located in the Client directory in the
XL Reporter program installation area and choose OK.
10. In the COM Add-ins window, select the XL Reporter checkbox and choose
OK.
Maybe you are looking for
-
Error in creating Enterprise manager repository
Error in Enterprise manager repository oracle@oracle:~> emca -repos create STARTED EMCA at Mar 8, 2009 9:14:45 PM EM Configuration Assistant, Version 10.2.0.1.0 Production Copyright (c) 2003, 2005, Oracle. All rights reserved. Enter the following inf
-
Win 8 is unsupported on late 2013
Hi, For some reason when I run Bootcamp to install Winodws 8 it comes up with a message that says its not supported. I have a Late 2013 iMac 27" which by all acounts is supposed to be supported. Does anyone know how to overcome this? My About info
-
How to convert mp3 songs into mp4
Help?
-
Bluetooth but no GSM in Flight mode ?
Hi, Is there a way on E61 to get Bluetooth working but not GSM when you use it in plane/flight mode ? or in an other mode ? Thanks Vince
-
I did not recieve an e-mail from apple about the change of security questions. What do i do ?
I want to buy something on the app store but they asked me to do some security questions. But i forgot the answers. So, i went to "Manage Apple ID" and clicked the send e-mail button. But i did not recieve it. I checked the spam and trash but did not