Sequence ID search in archived messages
Hi All,
I was looking to see if the sequence ID search will work on archived messages? I don't see any technical attributes section for extended search in archived messages tab in message monitoring of PO 7.4 SP6. Any idea?
thx
mike
>>>I was looking to see if the sequence ID search will work on archived messages.
If i go with the help documentation, I don't think that is possible. (In fact i don't see any other option other than Correlation ID under filters, i'm on SP08)
Advanced Message Search - Advanced Adapter Engine - SAP Library
Technical Attributes
Searching by technical attributes is possible only for the messages displayed in the Database tab. It allows you to find messages whose header contains information about a specific error category, quality of service, IDoc number, IDoc type, IDoc message type, protocol, transport, and many other technical details. You can also search for a message using Correlation ID. You can also use individual elements of Correlation ID like Interchange Number,Sender ID and Receiver ID as search parameters when using the advanced message search. For more information, see Searching EDI Messages using Correlation ID
Note You can use Correlation ID as a search parameter in the Archive database to search archived messages.
Similar Messages
-
User defined message search on Archived messages in PI 7.31
Hello Experts,
We are using XMLDAS to archive the messages of the adapter engine into a file system.
User defined search is working fine for the messages in the database, based on the UDMS criteria, in database tab of message monitoring. And as per SAP, "Extracted attributes are archived together with the message and could be used for searching".
But for us,once the messages are archived into a file system, the UDMS criteria is not working from the archive tab in message monitor.We are able to retrieve the messages in the archive tab based on the message id and also the payload content from it but not using UDMS.
Please let us know if we need to do any specific configuration for the UDMS criteria to work on archived messages as well.
Regards,
RamHello Michael,
Please check following links for configuration and re-check.
PI 7.3 – Adapter User-Defined Message Search without TREX
Configuring User-Defined Message Search - Advanced Adapter Engine - SAP Library
Also I believe you are searching for new / fresh messages after you configured UDMS. I believe it will not show up old message list prior to UDMS config.
Hope it helps
Regards,
Azhar -
User Defined message search on archived messags
hi all,
Am not able to retrieve search result in archived messages when using user defined message search. any idea ?
tx
mikeHello Michael,
Please check following links for configuration and re-check.
PI 7.3 – Adapter User-Defined Message Search without TREX
Configuring User-Defined Message Search - Advanced Adapter Engine - SAP Library
Also I believe you are searching for new / fresh messages after you configured UDMS. I believe it will not show up old message list prior to UDMS config.
Hope it helps
Regards,
Azhar -
Serching Archived messages -sxmb_moni
Dear All
i have archived messages in SAP PI and i need to know how to search archived messages in XI.. we need to search messages in allready archived ..please let me know if we can serach messgaes through SXMB_MONI ..it is dificult to serch messages by going through one by one ..
Regards
BudhikeHi Budhike,
Yes its possible and we 2 possible search features to search for Archived messages.
using SXMB_MONI
Archived XML messages(Search using Archive)
Arhcived XML messages (using ID)
Using an archive - Mostly Date wise
Using a message ID - Either Message ID or Pipeline ID
Refer to below SAP Help link that brief on the concept and steps
http://help.sap.com/saphelp_nwpi711/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
Regards
Sekhar
Edited by: sekhar on Feb 10, 2010 6:06 AM -
Hi Frnds,
Is there any way to filter the archived messages..
When i got for sxmb_moni and archived xmls(using archive),i could see only message id's .. i want to search the messages of a particular interface in the archive..
Can we search it like that?
coz opening each and every message id will take yearsHi,
Try with the below steps:
1. start SXMB_ADM
2. choose Schedule archiving jobs
3. click "Archive Administration"
4. click "Information System"
5. click "Customizing"
6. select your object "SAP_BC_XMB" and click "Fill Structures"
7. run it as a background task
Ref: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
Thanks, -
How to find the IDOC for the archived message in integration engine
Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh -
I'm missing older, non-archived messages in my IMAP inbox
I'm running T-Bird 31.2.0 on a Win 7 PC. I use T-Bird as an IMAP desktop client. Recently I noticed that all my messages earlier than 10/12/2014 have disappeared from my Inbox. When I run a search, the missing messages show up in the search results, but I can't get to them.
My Archive folders have messages from 06/01/2014 - 9/16/2014, but nothing from 01/01/2013 - 5/31/2014 or from 9/17/2014 - 10/11/2014.
I've checked my profile, and there doesn't appear to be a second folder for this account. I tried deleting .msf and repairing folder. No change.
Any thoughts?I posted a similar issue. I discovered there was a destructive TB update that purged all my sent mail. I've asked if there was a backup made as part of the upgrade but no one has responded yet (so, i'm assuming no). As a first time, and very new TB user, I would never have thought that I had to do weekly backups (doing that now). Also, turns out that TB was not/is not posting my sent mail back to my host email account (just keeping it locally) - that is most likely why the upgrade deleted all my mail. The upgrade did not respect the settings (never delete messages) and performed a synch anyway and deleted all my local sent mail. Pretty crappy really....
-
HI Guys,
Still not clear to me how/where should I monitor archived messages in PI 7.1.
TO be honest is the first time I am facing such topic.
It looks like the archive is based on archiving/date ad message id.
Any way to monitor archive interface by namespace or interface name?
Archiving procedure has been defined,but interfaces to be archived have been just defined thereofore I guess
the only archived messages will be the ones from today + retention period.
Can anyone confirm it?
thanks in advance for your input.
Regards,
GiammaDear Giamma,
yes, there is such an option like you are looking for.
We decided to replace the "Search using ID" in SXMB_MONI with a new powerful functionality that enables you to monitor your archived messages using any active archive infostructure for archiving object BC_XMB.
This feature has been introduced as of PI 7.10 SP 11. An advance version is available per SAP note 1463896.
Just define a new archive infostructure according to your needs (f.e., add fields for service, party, interface and namespace), activate it and run the new search using this new infostructure.
Best regards,
Harald Keimer
XI Development Support
SAP AG, Walldorf -
Log 1 sequence# 638 cannot be archived
Hello,
I've this error when i start my OAS script and i found nothing about these error.
Could you help me to correct this error please ?
ORA-16038: log 1 sequence# 638 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 1 thread 1: '/home/oracle/oradata/orcl/redo01.log'
Then, after that:
opmnctl: starting opmn and all managed processes...
and after a long time to wait opmnctl...I obtain that :
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=rd-srv-oas:6200
1 of 2 processes started.
ias-instance id=infra.rd-srv-oas
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/OC4J_SECURITY/default_island
Error
--> Process (pid=1522)
time out while waiting for a managed process to start
Log:
/home/oracle/infra/opmn/logs/OC4J~OC4J_SECURITY~default_island~1
TZ set to Europe/Paris
Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://rd-srv-oas:1810/emd/console/aboutApplication
Starting Oracle Enterprise Manager 10g Application Server Control ...... started successfully.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=rd-srv-oas:6201
3 of 6 processes started.
ias-instance id=portal.rd-srv-oas
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_island
Error
--> Process (pid=3334)
time out while waiting for a managed process to start
Log:
/home/oracle/portal/opmn/logs/OC4J~home~default_island~1
ias-component/process-type/process-set:
OC4J/OC4J_Portal/default_island
Error
--> Process (pid=3335)
time out while waiting for a managed process to start
Log:
/home/oracle/portal/opmn/logs/OC4J~OC4J_Portal~default_island~1
ias-component/process-type/process-set:
OC4J/TestWeb/default_island
Error
--> Process (pid=3336)
time out while waiting for a managed process to start
Log:
/home/oracle/portal/opmn/logs/OC4J~TestWeb~default_island~1
TZ set to Europe/Paris
Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://rd-srv-oas:1814/emd/console/aboutApplication
Starting Oracle Enterprise Manager 10g Application Server Control ...... started successfully.
Thanks a lot !!!
M.
Message was edited by:
Manu[demo oracle test10]$ oerr ora 19809
19809, 00000, "limit exceeded for recovery files"
//*Cause: The limit for recovery files specified by the
// DB_RECOVERY_FILE_DEST_SIZE was exceeded.
//*Action:The error is accompanied by 19804. See message 19804 for further
// details.
[demo oracle test10]$ oerr ora 19804
19804, 00000, "cannot reclaim %s bytes disk space from %s limit"
// *Cause: Oracle cannot reclaim disk space of specified bytes from the
// DB_RECOVERY_FILE_DEST_SIZE limit.
// *Action: There are five possible solutions:
// 1) Take frequent backup of recovery area using RMAN.
// 2) Consider changing RMAN retention policy.
// 3) Consider changing RMAN archivelog deletion policy.
// 4) Add disk space and increase DB_RECOVERY_FILE_DEST_SIZE.
// 5) Delete files from recovery area using RMAN.
[demo oracle test10]$Your DB is not able to archive a logfile, because of no more space in FLASHBACK area. If you have enough space on disk you can increase the value of DB_RECOVERY_FILE_DEST_SIZE parameter, if not you should take one of other actions above to reduce occupied space in directory identified by DB_RECOVERY_FILE_DEST parameter.
Anyway, you should periodically clean up the flashback area in some way.
Paul -
ORA-16038: log 1 sequence# 607 cannot be archived Error..
hi I Have a Problem to Start my Database.
My Database is Not in Archive Mode..
to know the detail error message is Given..
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16038: log 1 sequence# 607 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 1 thread 1:
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\REDO01.LOG'
I cam not recover My Database..
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
I think recovery nolonger needed..
pls any one help me..Hi
ORA-19809: limit exceeded for recovery filesYou have two options now. First is to set the db_recovery_file_dest_size to a bigger size (if you have disk space available ie) and second to use RMAN to delete the archivelogs.
Rgds
Adnan -
Query Archived Message Tracking Logs
Hi,
How can we query archived message tracking logs restored from backup from EMS?
Regards,
Irfan
Irfan Goolab SALES ENGINEER (Microsoft UC) MCP, MCSA, MCTS, MCITP, MCTHi Irfan,
I am a little confused, could you please describe your requirements in more detail ?
If you want to restore a message , you can use "Search-Mailbox" cmdlt to find and recover it;
More details for your reference:
https://technet.microsoft.com/en-us/library/ff660637(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?
No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that. -
Can I search email archive on iCloud server from iOS device, or can I only search what it has downloaded locally?
I currently have an iPhone and iPad, and am soon changing over to a Mac. When that happen I'd like to try to see what I can migrate over from the Google ecosystem to the iCloud ecosystem.
1) Currently I have the Gmail iOS app (a webapp container) that can search server-side of several years of email archive. Can iCloud do this using the iOS native mail application? Or is the search just limited to what the device has downloaded locally?
2) Do I have to use a @me.com address for the full iCloud email sync to take place between server, Mac, and iOS devices?
Believe it or not I've read quite a bit about the iCloud services, but the answers to these questions were far from clear. Many thanks for the help.2) iCloud only syncs email between .me/.mac addresses. For other accounts like google, you set up the account in the mail app and if they're IMAP accounts, you can sync between the google server and any devices you have defined that account on.
I'm not absolutely sure about 1) since I haven't had to search going back years - I use MailSteward for that on the mac. On my iPhone/iPad, when I go into a mailbox and the emails are not immediately available, it downloads them. I suspect for a search, you need the emails downloaded. -
How to delete the archived messages?
Archiving is setup and running in our PI systems. ( I used the SDN doc, "Archive and Delete Messages in SAP. XI: A Step-by-Step Guide")
I'm now looking to automate the deletion of the archived messages (NOT the deletion of the original message in the DB, but the data that has been written out to the O/S -- the actual archived data file.
Any pointers on how to accomplish this?
Thanks in advance.
-Joe RufoThe archive job creates the files in the files system you configured. These files contain the archived messages..
What you can do is run periodic jobs to deletes files which are older than a certain date...
If there are certain types of messages you want to hold on for a longer period...then archive them seperately... and run a different batch job to clear the files...
regards,
Arvind R -
My iPad is not recognized by Finder or iTunes when it is plugged into the computer. i ran the Restore sequence and got an error message stating "The iPad could not be restored. An unknown error occurred (1611). Can this be fixed?
iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125
Maybe you are looking for
-
Adobe premiere update/aspect ratio problem/vista
Can someone please help... I have already set up a video in Premiere 6.0 with a 16:9 aspect ratio. When it exports, the aspect ratio is between 16:9 and 4:3. My DVD authoring program reads it as 4:3, and cuts off part of the video, or adds black bars
-
HPE-390t Bluetooth issues on Win7 Ultimate
I have an HPE-390t that is running Win7 Ultimate (which came with it when I purchased it from HP). Lately, Bluetooth has been very iffy on the machine and I'm not sure if it's a hardware or software issue and how to resolve it either way. Sometimes
-
Upgrade issue in ECC6.0 for include structure
Hi All, I have the following issue while upgrading to ecc6.0. data:begin of it_cats, include structure cosp, end of it_cats. I am geeting syntax error as include structure is not allowed in ecc6.0.What is the replacement for this? Thank
-
OWB installs some tables under the target schema (including, for example, WB_RT_PARAMETERS, WB_RT_PLATFORM_PROPERTIES). These tables are in the same schema as all of our application target tables. Our DBAs want to know: (1) Is there some way to have
-
I purchased 4 songs from newly lauched store india, they charged Rs 48 (Rs 12 each) But my A/c debited with first with Rs 60 and soon after that with Rs 48 . No previous bill was pending. why ?? and how to get Rs 60 back. Purchase is successful and