Sequence / interval mode in Noia N73 and N95.

The camera in my Nokia N73 has a sequence mode where it takes 6 pictures in a sequence.
I read that Nokia N95 has a similar mode where you could set time between pictures and number of pictures that should be taken.
Is there any software I can load into my Nokia N73 that gives me the same functionality as in the Nokia N95?
I want have a sequence/interval mode where I can set time between pictures and number of pictures.

I'm afraid thats not possible...
Also,n73 Sequence mode is useless...It never works!
I've tried 4~5 firmwares! but it never works!
Just takes random shots and shuts down!
Its given me anywhere from 2~9 shots...very Frustrating!

Similar Messages

Gen 4 iPad will wake up from "sleep mode" on its own and stay on till fully discharged, getting fairly hot in the process

Gen 4 iPad will wake up from "sleep mode" on its own and stay on till fully discharged, getting fairly hot in the process

I think I have the same problem. The whole sequence is:
* Put MacBook Pro to sleep by closing lid.
* After some period of time that varies, I notice sleep LED is no longer pulsing.
* The case is VERY hot.
* When I open the lid, the display stays black.
* No sequence of keys or closing/opening lid wakes display.
* Only way to recover is to power cycle.
* Problem is VERY intermittant -- I do not know how to reproduce it at will. AppleCare service had it for a whole week and couldn't reproduce it, whereas for me it occurs once every 1 or 2 days.
Actions:
* AppleCare service replaced the main logic board in early June, but it didn't help.
* I did a clean erase and install, but it didn't help.
* AppleCare service had the unit for a full week in July and couldn't reproduce the problem, so they returned it and it still had the problem.
I have a Logitech Bluetooth mouse, don't know model other than M-RBB93. I'll UNset "Allow Bluetooth to wake..." and will also turn off the bluetooth mouse before closing lid. I'll post my results.
Meanwhile, please let me know if anyone determines a solution!

[svn:fx-3.x] 10689: Modify TileBase renderer creation sequence to match those of List and DataGrid .

Revision: 10689
Author:   [email protected]
Date:     2009-09-29 11:11:24 -0700 (Tue, 29 Sep 2009)
Log Message:
Modify TileBase renderer creation sequence to match those of List and DataGrid.
QE Notes: None
Doc Notes: None
Bugs: SDK-23487
Reviewer: Corey
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/components/TileList, HorizontalList
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23487
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/listClasses/TileBase. as

zeratul289 wrote:
Look for this:
Subsection "Display"
Depth 24
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
And change it to this:
Subsection "Display"
Depth 24
Modes "1280x1024" "800x600" "640x480"
ViewPort 0 0
EndSubsection
The resolution for your monitor was missing for that particular depth.
Close. worked after I added the "1024x768" mode as well as "1280x1024".

Transferring from N73 to N95

Hi
Can anyone help me. I got a N95 last week, and some how I managed to delete folders in it!! I was trying to delete my music which wouldn't play. Any way after speaking to Nokia my music now works, but I can not get my contacts and messages to transfer from my N73 to N95. I was trying to transfer them by blue tooth. I have tried so many times now. I also don't have a cable to connect my N73 to computer to do it that way. Have I deleted something that I shouldn't have. Can you tell me how to transfer my contacts?
Thanks

a simple way to transfer things is to use the " data transfer" application found on your N73 to send data to the N95 through bluetooth. as i believe the app can be found under tools or utilities.
if you have sync your contacts with a computer , you can sync again and let the computer restore you contacts back.
another method which is lengthy is to use the memory card:
1- Make sure your memory card is inserted in your old phone.
2- Launch Contacts application and then select Options | Mark/Unmark | Mark all. It will select all contacts you have on the phone.
3- Copy all the contacts to the memory card by selecting Options | Copy | To memory card.
4- Now you have your contacts in the memory card. They are stored in vCard format under \Others\Contacts folder.
5- The next step is to transfer your vCard files to the new phone. If your phones use the same format of memory card, for example Mini SD, it is much easier. Simply remove your memory card from the old phone and then insert it in the new phone.
5- What should you do if your phones use different format of memory cards, for example one is using Mini SD and another one is using RS MMC? You need to transfer the files using memory card on your PC. Copy all the files under \Others\Contacts folder from one memory card to the other one.
6-OK, now you have the memory card inserted on your new phone. Launch Contacts application then select Options | Copy | From memory card. It will import all the vCard files from the memory card to your Contacts application.
Fear not those who argue but those who dodge

Updated my n73 and lost all my games

Hi I updated my n73 and lost all my games but when I look on my memory card they are there, is there a way of getting them back. I have tried using the app manager but it says there are installed
Thnx Icheb

04-Nov-200706:01 PM
icheb wrote:
Hi I updated my n73 and lost all my games but when I look on my memory card they are there, is there a way of getting them back. I have tried using the app manager but it says there are installed
Thnx Icheb
If it is not possible to get them re-installed by inserted your memory card in. Snake is avilable as a .sis file on Nokia Web site support for N95, this can be installed on N73 too. My phone is APAC code,the rest just hidden under download program you can connect to cataloque by eGPRS and you will find a SpaceImpact for free and Sudoku is there to DL but have to pay for full, anyway very cheap.
Hope you will find them too.Message Edited by delixis on 06-Nov-200706:59 AM
C6-00 with 8GB MicroSD

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

Iphone in recovery mode,i'm restoring and updating to itunes but download cannot be completed... my phone wont open, i can't even turn the power on.what to do? pls help

iphone in recovery mode,i'm restoring and updating to itunes but download cannot be completed...
my phone wont open, i can't even turn the power on.
what to do? pls help
(iphone 4 and iphone 4s)

So I just did this on my iPhone 4 and it worked like a charm it unlocked it immediately. My phone was put into recovery mode and I know that not all data is deleted it just puts the phone into a sort of hibernation in order for the files to stay uncorrupted. I went to http://www.recovery-ipad.com/iphone-stuck-in-recovery-mode.html downloaded the software it unlocked my phone in a matter of minutes. Calls, messages, photos, apps, and voicemail was all there as if it never happened If you leave it unregistered you don't have to pay for it works for either windows or mac. Hope this helps!

My ipod touch is stuck in recovery mode I tried RecBoot and the reiBoot both fail to get me out of recovery I get error 28 instad now what?

My ipod Touch 2nd Gen 8GB is stuck in recovery mode I tried RecBoot and when that couldn't do it I tried reiBoot both failed to fix my problem what do you suggest?

Start off with some basic steps:
- Make sure iTunes is up to date
- Try another usb cable
- Try another usb port
In the article Resolve iOS update and restore errors this is what it says about error 28:
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

My iphone 4 went into recovery mode for some reason and it is unable to be restored. any ideas how to fix this?

my iphone went into recovery mode for some reason and is unable to be restored. it wont turn on and when plugged into a charger it shows a usb and itunes symbol. so i plugged it into my mac and connected to itunes then itunes said it has detected a phone in recovery mode and needs to be restored. so it goes through the restoration process for a couple minutes or so then stops and says itunes is unable to restore because an unknown error occurred (2001) or (2006) and other times i try it says its unable to restore because itunes cant detect the device... any ideas how to fix this?

Errors 2000-2009 (from Apple support): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604. If the issue persists, it may be related to conflicting security software.
2001: Use up to date software. Make sure your device is in DFU Mode: http://www.iclarified.com/entry/index.php?enid=1034
2006: Use a different USB cable. Possibly the one that came with your iPhone.

AppleTV: How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming from my iTunes?

How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming music from my iTunes?
Thanks.

Thank you Winston. I guess we need to ask that this feature gets added at least as an option in an upcoming release. When someone is using shuffle, it helps to know what is playing while viewing pictures.
Where is my Apple request button when one needs it ? :-) Cheers, C

HT4314 There is a defect in SpellTower. I was in the middle of a game of Puzzle Mode on my iPhone and had passed the 63,000 point level. The game then disappeared without any record. My wife had a similar problem on her iPad in Tower mode. Fibonacci44

Has anyone else had the following problem with Spell Tower? I was in the middle of a game in Puzzle mode on my iPhone and had passed the 63,000 point mark. I paused the game (as I had many times before). When I tried to resume the game, the game had vanished without any record. My wife had a similar problem in Tower Mode. In addition, the Apple support page says that, to report an issue, one should click on a specified link at the bottom of the information page for the App in question. There is no such link on the SpellTower information page. Fibonacci44

There are two separate issues here.
1. There is a potential problem with the game Spelltower. That needs to be discussed directly with Spelltower. My attempted emails to Spelltower have been bounced.
2. Apple, on its own webpage, purports to establish a procedure for reporting an issue with an app. But that procedure does not work with Spelltower because someone at Apple neglected to include a link on the relevant information page. I have been trying to find that contact info without success. Apple should take ownership of supplying that contact info.

My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen.

My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen after update os7 to os7.04
My phone is completely disabled, what can i do ?

Connect to iTunes. The phone is in Recovery mode. Follow the directions in this support document. http://support.apple.com/kb/HT1808

Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.

Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.

Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.

How to export photos with editing from preview mode to hard drive and external hard drive?

I have applied changes to the photos in the preview mode. Unfortunately, I can't export them from preview mode to hard drive and external drives. Whenever the external drive is plugged, the changes I made are not applied to the photos on the both hard drives.

Sorry what do you mean Preview Mode? There is no Preview mode or module in LR. There is a Library and Develop module in LR. The Library module does have the ability to do some adjustments and the Develop module has all the image adjustments.
In any event to export an image you can either right click on it and select Export or when in the Library module you click the button that says Export.

In an HDV sequence can I "scrub" the timeline and record it via FW to tape?

In an HDV sequence can I "scrub" the timeline and record it via FW to tape?
In standard definition I used to be able to do this via Firewire to my mini-dv deck. But now I am working with the Canon Vixia30, an HDV camera. I'd like to be able to scrub the time line back and forth at varying speeds and record this scrubbing live (rather than doing it with Motion software.) Is there anyway to "record" this action, either onto tape or digitally, while maintaining the HD resolution?
If possible I'd like to figure out how to do this without buying extra equipment. I understand I could get a Matrox MO2 Mini box ($450.) to output the live HD signal, but then how to record the HD signal from the Matrox box? (my camera only has HDMI out, not in.)
Thank you for your input.

And if you capture your footage as ProRes (as I see discussed in another thread), you cannot output to HDV via firewire. It would be pointless. To go from a lossy format to ProRes to edit...then convert back to HDV. Typically people who shoot HDv never master back to HDV, as it isn't a mastering format.
And yes, the MAX is totally worth it. Compression times faster than RT (meaning less time to compress than the timeline is long...I did 90 min timeline in 75 min yesterday). Worth it? Depends how much your time is worth. TO me, I'd like to have the compression done in 75 minutes opposed to 3-4 hours.
Shane

Sequence / interval mode in Noia N73 and N95.

Similar Messages

Maybe you are looking for