Sequence is not yet defined in this session

Hello everybody
I have package, that contain some steps. I create batch log in the start (using BATCH.nextval sequence) and to close batch log in the end (using BATCH.currval sequence) of package, also after each step of the package I create batch_process log (using BATCH.currval and BATCH_PROCESS.nextval sequences). Log works fine, if the package status is "SUCCESS".
But when I get an error through any step, I try to create errored batch_process log (using BATCH.currval and BATCH.nextval sequences) and to close batch log (using BATCH.currval sequence) with error also. So, when I try to create errored batch_process log, T get an error: BATCH.CURRVAL is not yet defined in this session.
Help, please, to solve this error.
Best regards

Are you trying to handle the error in a scenario and accessing batch.currval from within that scenario ?
If that is the case, then you need to know that each scenario creates its own session and connection to the DB. So, the currval becomes undefined within that session.

Similar Messages

Sequence : .CURRVAL is not yet defined in this session

Hi ,
I had created a sequence with the name 'myseq' and used next function to retrieve the value.
But when used currval function
I am getting the following error:
sequence MYSEQ.CURRVAL is not yet defined in this session

898763 wrote:
Hi ,
I had created a sequence with the name 'myseq' and used next function to retrieve the value.
But when used currval function
I am getting the following error:
sequence MYSEQ.CURRVAL is not yet defined in this sessionYou don't need currval. The typical scenario is either to use the sequence value and store it in a variable. Then reuse this variable. Or better insert into a table that has a db trigger that fills the ID column from the sequence. In the latter case you would use the returning clause to fetch the new ID value.
example pl/sql code
declare
v_empno ename%empno%type;
begin
/* the empno column is filled by a DB-Trigger from a seqeunce */
insert into emp (ename)
values ('Ellison')
returning empno into v_empno;
/* do more stuff here, using the variable v_empno */
end;
/

ORA-08002: sequence PSP_SEQ.CURRVAL is not yet defined in this session

Hi,
I have installed an application on a standalone PC.
I migrated it to my production environment and now I get this error.
In this situation I fill in a new record (but without showing first the records already available) : i.e only the second part of a form with a report and only with create- abilities.
It works well on my standalone PC.
What can be the reason ?
Any reaction will be appreciated.
Leo

You have to use nextval to get it current in your session.
If you just want to know the current value use the user_sequences data dictionary view
select last_number from user_sequences
where sequence_name = 'PSP_SEQ';Edited by: Keith Jamieson on Mar 18, 2009 4:28 PM
can't type correctly

Is not defined in this session

SELECT cycle_flag, sequence_name FROM ALL_SEQUENCES
I picked 'record_SEQ' sequence from the listing.
select record_SEQ.Currval from dual; ==> ORA-08002: sequence record_SEQ.Currval is not defined in this session.
where is the problem ?

As per the link you posted it says , this error comes up when there is no value >...but I can see the last value in the sequence is 20632 (using TOAD's sequence tab and highlight the particular sequence).
So, This error is confusing
Total Questions: 3 (3 unresolved) ?????one answered and Marked as answered.
Edited by: user575089 on Dec 23, 2009 12:47 AM

" . . . product is not yet supported by this online service"

I need support for my new iMac and get this when entering my serial number: " . . . product is not yet supported by this online service." Please tell me what went wrong and how to get support. I chatted with them yesterday and we did a restore. Since it took a couple of hours, I thought that I would return today to finish the issues.

I need support for my new iMac and get this when entering my serial number: " . . . product is not yet supported by this online service." Please tell me what went wrong and how to get support. I chatted with them yesterday and we did a restore. Since it took a couple of hours, I thought that I would return today to finish the issues.

Structure not yet maintained for this combination of characteristics

Hi,
I have crated infor structure, maintained parameter. Created planning hierarchy also.
When I use transaction MC93 to create flexible plan, I am getting error message ""Structure not yet maintained for this combination of characteristics""
Please suggest to overcome this issue.
thanks and regards
murugesan

Dear Murugesan,
could you elaborate (explain in more detail) about the step you do to fix this issue?
right now i am encountering the same problem?
Thank you in advance for your help.

Field symbol has not yet been defined-ALV Grid Display in Report

Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O

Sequence will not validate with run time prompts in business rules

I am in Hyperion Planning v 1.1.1.3, with Workforce initialized. I am creating a sequence of business rules. The rules use run time prompts within them and validate when used on their own. However, when I insert them in a sequence the sequence will not validate, apparently due to the run time prompts.
The sequence returns the error: Cannot calculate. Essbase Error(1200323): Error parsing formula for [FIX STATEMENT] (line 7): expression expected after [(].
Line 7 in the business rule is as follows:
FIX ([rtpYear],[rtpScenario],[rtpVer],[rtpCC],[rtpBU],[rtpEmp])
The problem is not isolated to this business rule, it occurs with any rule I try.
Can sequences function with run time prompts in the included business rules?
Stephen

I have figured out that if any rtp is hidden in the business rule, the sequence will not validate. Is this expected behavior for sequences?
Additionally, hiding the variables in the sequence has no effect if the variables are not hidden in the rule. When launched from a menu in a web form, the user is prompted for values for all variables (except for the Execution Database Name) although they are prepopulated based on the members in the POV, Page, etc. Is this also expected behavior?
I also find that it won't validate if "Merge launch variables" is selected (I have included rules associated with different plan types and with different dimensionality, so this may be expected). The user is prompted to provide values for every variable in each rule in the sequence, many of them duplicates (though, again, they are prepopulated based on members in the form).
Stephen

Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.

Hi,
I am getting a pop-up message(Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.Make edits in checked-out enterprise global template to make them
available for all users of this project server) when trying to insert a new column in the Gannt Chart View.
Due to this what all are the columns that inserted in the project plan, will be lost when open the project in the next time.
I have opened the Enterprise Global Template and cross checked for Gaant Chart view it is showing the table as "Entry" only.
The requirement is what all columns are required for the project plan, manager will insert in the project first time. Next time on-wards it needs to be display the columns when opened the project from server by default.
We are unable to reproduce this issue in our Dev Envt.
Could anyone of you please help me.
Thanks in Advance!
Regards,
Venkat

Hi Venkat,
I suggest to remove Gantt Chart view and Entry table from Eglobal. These are default views from client and it is highly recommended to not use them in Enterprise Global.
Whatever a user ist doing on a view or table which is included in Enterprise Global will be reset on next open - therefore you receive this message.
If you need some server wide defined views and tables, create them. But remove Gantt Chart and Entry.
Does that help?
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Currency translation key 899 has not yet been defined

Hello,
While executing report S_PL0_86000028 in production client I am getting message 'Currency translation key 899 has not yet been defined' Message No. KH292.
However, the same message does not appear in quality/development client.
Any idea as to what could be the reason for different behaviour of report between produciton and quality ?
This is an information message. However are there any possibilities of the incorrect report figures being displayed due to this error ?
Regards
Jayesh.

Hi,
I had this message a few years ago in an investment report, SAPNET note 68264 solved that case. Search SAPNET notes there are some old ones (eg 111575, 117829) maye they are helpful.
best regards, Christian

[svn:cairngorm3:] 15301: - Fixing a bug in the case where a Message is dispatched without a ModuleId defined to a Module type which is not yet instantiated .

Revision: 15301
Revision: 15301
Author:   [email protected]
Date:     2010-04-09 03:30:11 -0700 (Fri, 09 Apr 2010)
Log Message:
- Fixing a bug in the case where a Message is dispatched without a ModuleId defined to a Module type which is not yet instantiated.
- Updating the sample to show this use-case.
Modified Paths:
    cairngorm3/trunk/libraries/Module/src/com/adobe/cairngorm/module/ModuleMessageDispatcher. as
    cairngorm3/trunk/libraries/ModuleTest/src/CairngormModuleLibSample.mxml

Hello,
The error
2. How to get rid of "ORA-06512: at"FLOWS_030100.WWV_FLOW_RENDER_QUERY", line 636"?you can also find in the new features application. I wrote a post about that some days ago:
Bug in New Features Application?
Had some trouble to get the PDF print working, too. Printing works fine for standard reports, but for interactive report I am not able to get it working. Sometimes I am getting only blank pages (and no file) and sometimes I am getting PDF's which just contain an internal 500 error. Some details are in this thread: Print Interactive Reports does not work
Maybe that's related to the error of kkkannan74.
Regards, Tine.

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

HT2589 when I try and log in my i-tunes account or my app store account on my i-phone it says "this apple I.D has not yet been used on the i-tunes store" it gives me 2 optins "cancel" or "review" I press review, enter my bank details but they decline..why

Hi can anybody help or advise me? I've recently bought the i-phone 4s, I've set up my apple I.D and password but everytime I try and log in it says "this apple I.D has not yet been used on the i-tunes store" I click "review" follow the instructions and agree to the terms and condition's, enter my bank details but it declines every time? I've tried both my accounts and its declined both, this stops me from logging in so I can't download anything for free or buy anything, my sister had the option of skipping the bank details part when she created her apple I.D and just enters her's when buying something, why do I not have that option?? And why is it declining my bank details...please HELP!!!!!

The details I'm entering are correct, I choose visa as my card type, enter my card number, enter my expiry date and my last 3 digts on the reverse of the card, enter my address and zip code plus my home telephone number, click continue and it says "the payment method you have selected has been declined, please enter another payment method". I've lost count how many times I've tried, I've typed my details in slowly making sure I put them in properlly and it still declines it, I've even tried makeing a new apple I.D and when I get to the bank details part it declines it again so I am forced to press cancel and all details are not saved so its just like I'm hitting a brick wall, its ******* me off!!! I can't even download any of the free app's because to do so you must log in but when I do it says "this apple I.D has not yet been used in the i-tunes store" review my details and can't get past the bank details part. So doesn't log me in, I'm honestly out of ideas

Why when i want to download a free app from app store it asks for my apple id and when i give my apple id it then says "this apple id has not yet been used in the itunes store". i dont even know what that means and it will this happen everytime?

why when i want to download a free app from app store it asks for my apple id and when i give my apple id it then says "this apple id has not yet been used in the itunes store". i dont even know what that means and it will this happen everytime?

If you are within 14 days of purchase you can still return the iPhone and get the phone that suits your needs, however, I think you will find that no matter which phone you get the content provider will want to know how you are going to pay for future purchases. For Android phones it is Google, and they will certainly want to know.
To create an Apple account without a credit card see: http://support.apple.com/kb/HT2534

Whenever i try to login with my apple ID , it says this ID is not yet used on itunes. & because of this i can't even download apps. Please someone tell me what should i do ? ASAP.

Whenever i try to login with my apple ID , it says this ID is not yet used on itunes. & because of this i can't even download apps. Please someone tell me what should i do ? ASAP.

Read here:
http://support.apple.com/kb/ht2589

Sequence is not yet defined in this session

Similar Messages

Maybe you are looking for