Sequence matches clip, but still needs rendering.... what am I doing wrong?

Ok, I've spent HOURS tweaking these settings, and I can't figure it out.
I have files from a Flip Cam that I converted using to a .mov file using MPEG Straemclip with the following settings:
1280x720
16:9 Anamorphic
29.97 fps
Compression: DV/DVCPRO - NTSC
Pixel Aspect Ratio: Square
Field Dominance - None
I'm using FCP 5.1.4, and I'm almost positive that my sequence settings match perfectly. The audio is not an issue - it's working fine. But the video refuses to work properly, and it constantly needs rendering. Any idea what I'm doing wrong? Anything new I can check?
Thanks in advance. I'm pulling my hair out.

DV/DVCPRO and 1280x720...those are incompatible. DV is a 720x480 format. 1280x720 is HD, and typically is either DVCPRO HD, HDV or ProRes.
You exported incorrectly from MPEG STREAMCLIP. You need to export out as DVCPRO HD if you are using FCP 5.1. Or Apple Intermediate Codec.
Shane

Similar Messages

  • I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

    I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

    "If you're on your home screen, where your apps and folders are, you can't."
    I can on mine.
    For anyone having this issue, take your device out of the case and try it naked before trying a reset, restore or Genius Bar appointment.

  • I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

    I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

    What version of OS X do you have? Messages requires 10.8. Previously it was iChat (but does not have iMessage capability to send texts to an iOS device).
    Matt

  • I originally set up my iTunes account on my computer at work, now that I got a home computer and authorized it, i have not been able to sync my apps from my iTouch to my home coumpter, it transferrred my music but nothing else. What am I doing wrong?

    I originally set up my iTunes account on my computer at work, now that I have a home computer and authorized it, i have not been able to sync my apps from my iTouch to my home coumpter, it transferrred my music but nothing else. What am I doing wrong?

    Hello John,
    It sounds like your music was copied from your iPod Touch but not your installed apps. I want to recommend this article to help you Transfer your Purchases named:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    You can also download your apps using your purchased history in iTunes with this article:
    iTunes 11 for Mac: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12283
    Click iTunes Store near the top of the iTunes window.
    Click the Purchased link at the right of the iTunes Store homepage (below Quick Links).
    In the page that appears, select a category.iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download.If you select Music, you can view your purchases by song, artist, or album. If you’re viewing by album, click an album to see which songs on it are available for downloading.To search for an item, type its name or a keyword in the search field, and then press the Return key to view your search results.
    To download an item, click its Download button .To download all available items, click Download All.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I am trying to face time from my facebook to my ipad by clicking on my email address in face time but it doesnt work, what am i doing wrong?

    trying to face time from my macbook to my Ipad butit wont work when i click on my emal address what am i doing wrong?

    so are the mac and ipad on the same itunes id and same email account via facetime in settings on ipad if there on the same receve calls from email then when you click on your email adress its like your trying to call to the exact mac does that mac sence

  • Can't send Mail on Mac Mail, but can on Entourage - what am I doing wrong?

    Aggg. Help.
    I have been using Entourage on my Macs, and have decided to switch to Mac Mail. I have multiple accounts for my websites on my dedicated server. I use standard ports for sending and receiving mail - and, as it is my server, I can dictate all controls.
    So... I can receive mail on my Macs, but can not send. I am trying to set-up IMAP accounts - and my server requires i use as outgoing" mail.mywebsite.com
    I use a linux server using cPanel.
    It works on Entourage. But Mac's Mail will not accept the outgoing mail information. I have tried with and without authentication (which is required). I have overridden the port and tried each individually (25, 465, etc..). I have tired smtp.mywebsite.com rather than the required mail.mywebsite.com, just to see. I have tried every combination of information with no luck. I sort of think I know how to set it all up, but can not understand what I am missing?
    Why can I not get Mac Mail to send?
    I can match what is in use by Entourage - but it just does not work.
    I use MS Office 2008's Entourage - and to make things more fun, Mac Mail will not import my Entourage accounts (says it can not find them). I am using a 3 month old iMac with latest OS. I have been on Macs since 1988 - so I just don't get what is going on. HELP PLEASE. Puuuullleeeeeaze.
    thanks!

    Hello,
    If you open the Activity viewer (click on Window in the menubar and choose Activity) and watch when you try to send, what phases if any are indicated are taking place before failure?
    What type of authentication is required for this SMTP? When using in Entourage, what are the selections in Advanced sending options, particularly regarding the box beside Use same settings as receiving mail server?
    Ernie

  • Bought music on itunes but one album wont sync onto my iphone. All others are fine, i have removed it and reloaded, re synced etc but to no avail - what am i doing wrong!?

    I have bought loads of music off itunes before and loaded to my iphone. I recently bought an album that for love nor money will not load to my iphone although is clearly visible in my itunes account. I have tried removing it and resyncing it, reloading it, syncing and then reloading the whole phone but still to no avail. Any ideas what I might be missing!?
    Thankies
    Sarah

    Hey Sarah!
    Have you updated your phone to iOS 5.1.1? I know the most recent update aided to resolving this issue. If you have updated, though, does the album look like its downloading and then stops or "crashes" at the very end?

  • I am having trouble in downloading apps as when I try, a message appears " not enough local storage is available manage this in settings". I have tried by deleting old apps but the message still appears.  What am I doing wrong and is there anybody that  c

    I am having trouble downloading apps onto my iPad2.  When I try a message appears " not enough local storage this can be managed in settings.". I ave tried by deleting unused apps, but the same message appears.  How can I resolve this ?  Help needed pleas.

    Try rebooting the iPad as well. You might be getting an inaccurate reading and rebooting might clear that up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • ITunes Match fails to stream correctly. What am I doing wrong?

    OK...I just signed up for iTunes match. I have about 24,000 songs in my library. While in my car, I will ask Siri "play album Machine Head". For a while all I got was a response that said, "I'm really sorry but I can't do jack right now, try later." So, I turned off Siri and turned it back on. Now, occasionally, it will say, OK, playing album Machine Head. and then immediately go into a pause mode. That's what it says on my car stereo interface. Pause. So I ask again to play the same album. Same result. Now, if I skip to the next song on the album using the advance button on my stearing wheel (Subaru Legacy), the next song will play. If I then use that control to go back, it will then play the first song.
    iTunes is set to use Celluar Data. I'm on Verizon. Other Siri queries work as expected. So far iTunes Match is a waste of 25 bucks.
    thanks,
    J

    Hi...thanks for the reply.
    Yes, the scan and upload has completed, as all files are available on my iPad and work on my local network ok.
    Artwork is present etc.
    I guess it could be Verizon at fault, but I'd be shocked if they don't have a 3G signal anywhere I've been driving.
    iTunes Radio seems to work fairly well if that's any kind of comparison.
    Thanks much,
    J

  • My Volume Limit restriction won't work.. It's still too loud, what am I doing wrong?

    As the header says... I've followed what the manual says, but I still can't get the volume to get any lower.. My daughter have played music on it, and it sounds like the speakers are gone soon... So I really want  the volume limit to work, before the entire iPod touch is broken...
    Can Anyone please help me ASAP?

    A. The Volume Limit setting lets you change the maximum output of your iPod’s headphone jack. The actual sound pressure level that you experience depends on several factors: the music you’re listening to, how it was recorded and encoded, the type of earbuds or headphones you use, and their placement in your ears.
    Above from:
    here
    Note it does not effect the internal speaker

  • Trying to draw a 2D shape, but Graphics2D is null, what am I doing wrong?

    At this point, I just want a shape to appear. But when I call draw(...), I get a NullPointer. Turns out when I call getGraphics() on the input JFrame (which does show up properly when the rest is commented out), I get nothing. Maybe it's the casting, I don't know enough about this issue to really say. If anyone out there has worked with 2D primitives and can shed some light on the problem, I would appreciate it.
    Thanks for any help.
    public class BatteryDisplay extends JPanel {
         Graphics2D g2d;
         Rectangle2D.Double rect1;
         JFrame jf;
         public BatteryDisplay(JFrame jf)
              this.jf = jf;
                    // Is there another way to get the graphics object?
              g2d = (Graphics2D) jf.getGraphics();
              createRectangle();
              drawRectangle();
         public void createRectangle()
              rect1 = new Rectangle2D.Double(100,100,200,50);
              System.out.println(rect1.height);
                    // The next line returns the NullPointer, so g2d is NOT initalized
              System.out.println(g2d);
         public void drawRectangle()
              this.g2d.draw(rect1);
    }

    Your painting functions should be initiated from an overridden paintComponent, not from the constructor. A graphics object will be provided to you there.
    [http://java.sun.com/docs/books/tutorial/uiswing/painting/index.html]

  • Im trying to watch movies from my macbook pro to my new vizio, but when I connect the minidisplayport to HDMI cable to input 2, and switch the input from my remote to that input, nothing happens.  What am I doing wrong?

    I am trying to watch movies from my macbook pro (2010) on my new vizio tv.  I connected the minidisplayport to HDMI cable (bought from the apple store) and switched the input to the right input but nothing happens. What am I doing wrong?

    Hi T,
    Open Sys Prefs > Displays and check the settings there.

  • I purchased a hdmi cable to watch movies and slide shows from my mac book pro to my sony bravia tv. i get picture through the tv but no sound. what am i doing wrong?

    I purchased a HDMI cable to watch movies and slide shows from my mac book pro to my Sony Bravia TV. I get picture through the TV but no sound. What am I doing wrong?

    Go to sounds in system pref and select outputs. When the hdmi cable is plug into the tv it will show as an option under output. Just select that option.

  • Banner with a clickable link, what am I doing wrong???

    I am trying to make a web banner out of an image I have with a link added so when you click the banner it takes you to the website. It looks fine on my computer but when I saved and email it the image is gone but the link still works. What am I doing wrong?

    HTML emails require you to save the images on a server then link to those images with absolute links in the email.
    The recipient's email client also needs to be set up to view images (many aren't).

  • I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

    I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

    The screen that says "Download Now" also shows the proposed iTunes version number (in the box below):
    Be sure it indicates 11.1.3.
    If it is, here's further troubleshooting:
    http://support.apple.com/kb/TS1538

Maybe you are looking for