Sequence No Is Not define ...

Dear Sir,
When i run the tax payment wizard at that time sequence Number is not define Error is coming.
Please help me.
Regards
Mangesh Pagdhare.

Hi Mangesh,
Check the link
Sequence No. not defined for the location [Message 80072-11]
Re: Why the document sequence is introduced
*Close the thread if issue solved.
Regards
Jambulingam.P
Edited by: Jambulingam P on Jun 29, 2009 11:47 AM

Similar Messages

Sequence No. not defined for the location [Message 80072-11]

Dear Friends,
I have setup sequence for A/R Invoice, Incoming / Outgoing Payment and Excise Register, and created a few document successfully (with sequence number). But when I go to u201CTax Payment wizardu201D, in the 2nd stage on selection of any location give the following error and even the u201CSeq. Nameu201D does not show any sequence name.
u201CSequence No. not defined for the location [Message 80072-11]u201D
Can any one please tell me the reason behind for SAP B1 2007B SP0 PL7?

Hi Narottam,
Check this link
Sequence Series
Regards
Jambulingam.P

Shared library extended class Error #1065: Variable is not defined

Right, bit of a complicated set-up here. I've got a class structure which includes the View class:
com.website.buttons.MyButton
Then i've got a shared library swc called sharedassets.swc that contains a MovieClip in the library that uses 'com.website.buttons.MyButton' as its 'Linkage Properties' base class, extending with the following empty class:
com.website.timeline.sharedassets.BackButton
Then i've got a second swc that imports the BackButton mc into its own library as a shared library asset, and uses an instance of it on the stage in a MovieClip of it's own called LinearNavBar. LinearNavBar's Linkage Properties are thus:
Class: com.website.timeline.sequence.LinearNavBar
Base class: com.website.navigation.LinearNavbar
Again, 'com.website.navigation.LinearNavbar' is an actual class in the code base, whilst 'com.website.timeline.sequence.LinearNavBar' does not exits (ie: its dynamically created by the swc at compile time). 'Automatically declare stage instances' is unchecked
Over in the class structure in my Flash Builder project, I've got another class
com.website.navigation.Sequence
Which instantiates a new version of LinearNavBar and adds it to the stage:
var navBar:Navbar = new LinearNavBar();
addChild(navBar);
At which point the following error is shown:
ReferenceError: Error #1065: Variable BackButton is not defined.
It seems Flash Builder cannot find 'com.website.timeline.sharedassets.BackButton', even though BOTH compiled swcs are included as part of the projects.
What gives, my friends? I am most heartily perplexed.

I have on the permit debugging option but it says nothing but these errors
ReferenceError: Error #1065: Variable Button is not defined.
ReferenceError: Error #1065: Variable ComponentShim is not defined.
ReferenceError: Error #1065: Variable LoaderProV3AS3 is not defined.

Local logical system is not defined

Hello
We are trying to setup a logical system - created or defined the logical system
when we try the BD64 it gives out the error "Local Logical system not defined"
I am using ECC 6 version
IS there any way to bypass and do the setup ?

HI Anil,
Best Methodology for creating a RFC Destination that also includes setting up Logical System is:
Use Transaction -> SALE /b]
1) Define Logical system :
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Logical System -> Define Logical System

2) Assign Client to Logical system:
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Logical System -> Assign Logical System to Client
3) Create RFC Destination: T-CODE (SM59)
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Communication -> Create Rfc Connection
Follow steps in sequence. Hope it answers every thing.
Cheers,
*RAJ*
*POINTS IF FOUND HELPFULL*

Is not defined in this session

SELECT cycle_flag, sequence_name FROM ALL_SEQUENCES
I picked 'record_SEQ' sequence from the listing.
select record_SEQ.Currval from dual; ==> ORA-08002: sequence record_SEQ.Currval is not defined in this session.
where is the problem ?

As per the link you posted it says , this error comes up when there is no value >...but I can see the last value in the sequence is 20632 (using TOAD's sequence tab and highlight the particular sequence).
So, This error is confusing
Total Questions: 3 (3 unresolved) ?????one answered and Marked as answered.
Edited by: user575089 on Dec 23, 2009 12:47 AM

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

Transfer Order : Data for storage type search is not defined (A   )

Dear Experts ,
While trying to use the Transfer Order and trying to determine the storage type this error appears :
Data for storage type search is not defined (A   )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
How ever , I have already configured the search and here is the Storage Type search's data in OMLY
1. Warehouse number : W10
2. Operation : A "Stock Removal"
3. Indicator :   E
4. Stock Category : Blank
5. Special Stock Category : Blank
6. Storage Location Ref :10
7. Storage Type : 10E
Please Advice
Edited by: Sap Sap on Feb 24, 2011 10:54 AM

Hello,
The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
In this go to determine search sequence and then
for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
I hope this helps.
BR,
Tushar

PropertyBag is not defined

Hi All,
During migration of portal from plumtree v5 to WCI 10g facing an issue.
PropertyBag has been used to get the settings and in WCI 10g throwing error this like "PropertyBag is not defined."
Can any one tell me what is the way to use PropertyBag in WCI 10g or any other alternative of the same.

As per the link you posted it says , this error comes up when there is no value >...but I can see the last value in the sequence is 20632 (using TOAD's sequence tab and highlight the particular sequence).
So, This error is confusing
Total Questions: 3 (3 unresolved) ?????one answered and Marked as answered.
Edited by: user575089 on Dec 23, 2009 12:47 AM

Sales tax data do not define output tax

Dear Experts,
I am creating contract and getting following error 'Sales tax data do not define output tax' in SAP REFX contract
I have done the following
define tax types
define tax groups
define tax codes
Assign tax code to tax type and group
Assignment of tax transactions key
Assign country to calculation procedure
Have i missed something? If you see the contract the tax rate 10% is getting picked Please help
Thanks Regards
yezdevan

Hi Vasudevan,
Check the following checklist and try.
1. For tax code used, check for percentage value maintenance for the relevant condition type in transaction FV13, if maintained check for date validity and deletion indicators.
2. Tax code should be assigned to company code at: Logistics - General -> Tax on Goods Movements -> India -> Basic Settings -> Determination of Excise Duty -> Condition-Based Excise Determination -> Assign Tax Code to Company Codes.
3. The condition type used to maintain the tax code, as seen in FTXP. should have MVST or MWST as the access sequence in OBYZ settings, based on input or output tax respectively.
Hope this resolves the issue.
Best Regards,
Hardik Sharma

Clear_formSearch is not defined

i've a situation , in a jsf page
in wich there is a form with id="formSearch" and a dataTable inside with its paginator to navigate the results but the paginator is not working , nothing hapend when i clickt it , but i get this error in the javascripts errors:
clear_formSearch is not defined
what could it be?

As per the link you posted it says , this error comes up when there is no value >...but I can see the last value in the sequence is 20632 (using TOAD's sequence tab and highlight the particular sequence).
So, This error is confusing
Total Questions: 3 (3 unresolved) ?????one answered and Marked as answered.
Edited by: user575089 on Dec 23, 2009 12:47 AM

Problem 'Comments Share is not defined'

Hello,
I've just published my website and when I go on it (with Safari or Firefox) there is this message in every 'multimedia' page : Reference Error - Comments Share is not defined.
I did not select the 'comments' functions in the inspector.
So, I'm a bit stuck. If someone could help, thanks a lot.
Problem can be seen at http://www.oroland.eu on page 'proximus' for example.
Message was edited by: oroland

As per the link you posted it says , this error comes up when there is no value >...but I can see the last value in the sequence is 20632 (using TOAD's sequence tab and highlight the particular sequence).
So, This error is confusing
Total Questions: 3 (3 unresolved) ?????one answered and Marked as answered.
Edited by: user575089 on Dec 23, 2009 12:47 AM

Billing type F2 not defined error vf 007

in Billing transaction this error happend
Billing type F2 not defined error Vf 007
and the billing type f2 is deleted from the system and it's not assigned in the sales order type
why the system determined billing type F2 for this sales order ??

you mean delivery relevant billing field is blank in transaction code VOV8 for your sales doc type?
if that's the case..I think system always defaults F2 for invoices, based on some parameters like sales doc type, screen sequence group etc..
Regards,
Raghu.

Unit of measure EA not defined for language RU

Hi gurus,
have you encountered this error while creating a PO? can't find any supporting document online.
please help how to resolve.
thanks,
mm

Hi Manohar,
Language RU (Russian) is not defined in our system and therefore the translation in CUNI is not the appropriate solution for this error.
Instead, we just maintained the vendor master to be in EN language to stop the system error.
thanks for your input anyway.
melanie

Why would I get ReferenceError #1065: "Variable title is not defined."

Well of course it's not defined. It's a dynamic class, and strict mode compilation is turned off so that I don't have to declare the property to compile it.
I've created a library item named "Page" with a single TextField instance named "title".
Page's class is defined in an ActionScript file, and it's assigned to the library item in export for ActionScript.
Page's ActionScript file defines the class as a "dynamic" class, so I should not be getting this runtime error. I turned off strict mode compiling, since it seems to be designed to check the presense of property definitions at compile time for dynamic classes like MovieClip.
public dynamic class Page extends MovieClip
    public function Page()
        super();
        var text:String = title.text; //title can be moused over in the debugger here and shows the correct value, but the flash player throws a runtime error when it tries to access it, but it shouldn't because this is a dynamic class.
So why am I getting a runtime error for the field "title". It makes no sense, because if I step to that line in the FlashDevelop debugger and hold the mouse over "title", it shows that it is in fact the instance of the TextField that I'm trying to access. Yet the player throws an error when I actually try to access it.
Is it a problem or limitation with the access style (i.e. would it work fine if I accessed it as "this.title" or "this["title"]"?

Nevermind. This was apparently a browser caching issue.   The Page base class is defined in the main interface swf, and is externally referenced through its swc in an external "lesson" file that declare a subclass of Page. It was this custom subclass of Page which was throwing the error (basically the same as the simplified example I wrote for my post, where it simply tried to access "title" as a dynamic property of the Page). What happened is the browser was caching an old version of the lesson file with the old definition of the class that was not declared as dynamic. I had received the error before, then updated the class, then I was surprised to see the error persist. It suddenly dawned on me that the browser was probably caching the old version, so I cleared the cache and it seems to work fine now.
Actually, it is a problem after all. I forgot I had updated it to use "this.title" syntax on the page I tested after clearing the cache, but the other pages that try to access title directly as "title" still throw the error. So it seems to be some sort of quirk in how flash accesses properties of a dynamic class. If you try to access them direclty, it must do so in a way that requires the property to be defined, but if you access it via "this.title" or this["title"], the it seems to resolve the property value without throwing the error.
This sucks. I was really trying to not have to write "this." for every property. The entire display list is dynamically generated from some custom XML that allows me to call constructors and set complex type-safe properties, and during construction it was copying each item into a Dictionary by name. This Dictionary was then assigned to the page class as "items", so I was accessing each display object as "item.name". Then I got the brilliant idea of just making Page and its subclasses "dynamic" so that I could just add the DIctionary values on the Page instance itself. I thought I would be able to access the dyamic properties just by their name such as "title", but lo and behold, Flash strikes again, and I have to use dot notation anyway. What do you all think? Any solutions?

Logical System is Not Defined in EBP...

Hi SAP GURU's,
Please do Accept My Thanks for Kind Help
Rendered So far ..
My issue is whie working wih Accoutn Assignment is EBP ,I Tried to Maintain Logical System ..But system is throwing Error Massage Logical System is Not Defined in EBP..
Where as it was Defined and Assigned to the Client
in the Configuration ...
The Same thing has been defined in R/3 also ...
what Could be the Reason..? ? ?
Could Any Gentleman through Some light on this
Suitable Points Assigned for the Right Answer
Thansk in Advance
Adarsh

Hi,
Pl define the same logical system names in the Define Back end systems or in the Table
bbp_backend_dest.
Thanks & Regards,
Nagarajan

Sequence No Is Not define ...

Similar Messages

Maybe you are looking for