"Sequence number already exists in table" maintining Data Sources

Hi fellows, i am seting up a new connector in GRC 10.0, but when configuring the connector for the User detailed Data sources i get the same error; "Sequence number already exists in table".
I have tried with over 200 numbers which I know for sure are available and still get the same error. Where can I find the table with this information?
Can the information be removed to clean up table space?
Thanks for your help!!!

Hi Gabriela
I recall getting this error a lot and it seemed to be a buffering/memory problem where it was remember the old value was getting remember. I had to exit out of the IMG navigation and reenter it again. It'd happen if I deleted one entry and then went to add another (even after saving). Not sure if you are getting this
Other thing is to check the backed tables to see if any orphaned values on the primary key
Regards
Colleen

Similar Messages

  • "File with specified name and version number already exists. Result code= -48."   ...????

    Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48."  WHAT IS THE PROBLEM?????? It's making me furious!

    Hi
    As the message says, there is a file at the recording directory that has the same name:
    http://support.apple.com/kb/ht1618
    Try changing the name of the track (this sets the filename in later versions of Logic 9
    CCT

  • The VAT registration number already exist while extending the CMR

    Hi All,
    We are already having a customer master record for two sales area(one for spain and another one for Netherland). Now we are extending the customer to a new sales area for the country Romania.
    But while extending  the customer we are getting the error message "The VAT registration number already exist".
    Awiting your reply.
    Thanks in advance.
    Sushanta

    Hi,
    Just make sure that your customer  basic country belong to the European Union. You need to select the OTHER Tab of the Vat Registration number . Enter Romania and its respective VAT number.
    Just try this and let me know if it working or Not.
    Regards
    Balachandar

  • Asset number already exists in AS01

    Hi all,
    I am creating a new asset in AS01. The problem is that I am getting the error saying that the asset number already exists. Typically SAP continues on from the last old number, but now it is restarting from 30000. The number is being generated automatically.
    Does anyone have any ideas on how to fix this numbering issue? I have looked in config but have failed to find anything.
    Thanks,

    Hi.
    Run Tcode AS08. Choose company code and click on status. Change the number range to match your current number range.
    This issue may be becaue someone might have resetted the number range using the path given above.
    Regards

  • Error:  Msg1: This Supplier Number already exists

    Hi All,
    I have created a procedure which search for a vendor and if the vendor or supplier doesn't exist then it will create that Vendor or Supplier using the API AP_VENDOR_PUB_PKG.Create_Vendor. I am using it as an concurrent program. Everything is working fine but I am getting the error
    Msg1: This Supplier Number already exists.
    But the neither the supplier or the Supplier number exits .
    Any Suggestions why I am getting this error. Please reply ASAP as it urgent. By the way I am in the R12 Env. with 11g Database.
    Thanks in Advance
    Edited by: 843564 on Apr 11, 2011 10:05 AM

    Hello,
    This error may be because of the setup of "Payable system Setup" for Supplier Number is "Manual".
    Can you check it @ > Payables > Setup > Options > Payables System Setup
    Vikram

  • Problem in Banking External reconcilation -already exist in Table "OMTH

    Hi,
        All,
             I am getting One Problem while Banking External reconcilation for an accont.it is giving error that entry already exist in Table "OMTH".
             it happens many times,Can u tell me reason and what may be solution to not getting again this problem because it is coming many times .
    Thanks In Advance

    Hi
    I found this Note 1062219 - Manual reconciliaton failed - primary key constraint
    The note is for 2005, but I would run the queries related in the note.
    Kind regards.
    Agustí

  • Why the system create HU that already exists  in table VEKP when I use BAPI_HU_CREATE?

    Hi All,
    When I use the BAPI_HU_CREATE  to create HU, the system give me a HU and it inserts a line in Table VEKP, however when I search in table VEKP  with field HU EXIDV, I find  two entries with the same HU, one of them has VPOBJ 01 and the other has VPOBJ 12, So when I execute  transaction LM46  the system shows “The system could not find transfer order for execution” because the system search in table VEKP it find the first line with VPOBJKEY = delivery  and STATUS = 0020, however those delivery is not assigned to transfer order that I want to confirm transfer order.
    Why the system create HU that already exists  in table VEKP when I use BAPI_HU_CREATE?
    Thank you!
    Best regards

    Do you want to say that you got 2 HU from BAPI_HU_CREATE?
    I think you only got the one which has VPOBJ = 12 Non-Assigned Handling Unit
    which is exact what the BAPI is used for, see the docu in SE37. Didn't you yourself add this EXIDV in the IDoc?
    VPOBJ = 01 Outbound Delivery
    If you want to pack the Outbound delivery then you should use BAPI_HU_PACK.

  • "This entry is already exists in tables(JDT1)(ODBC-2035)" Error.

    Hi experts,
    My Production_DB Database was got into  Suspect mode due to power problem,the users unable to open SAP. so  run the script file so production_db came into normal mode and sap opened.
    But which documents were posted at the time of database going to Suspect mode that documents are not visible and then users repost the documents they are getting "This Entry is already exists in Table(JDT1) (ODBC-2035)" Error.
    so we run the select query for JDT1 table in sql server 2005,we got "Msg 605, Level 21, State 3, Line 1
    Attempt to fetch logical page (1:394560) in database 7 failed. It belongs to allocation unit 72057596881666048 not to 72057596584198144".
    I am using SAP PL 20 and SQL server 2005.
    I am waiting for your response ASAP.
    Thanks & Regards.
    Srinu Boddeti.

    Hi Srinu,
    please refer below link for details..
    http://forums.sdn.sap.com/thread.jspa?threadID=1636430
    Thanks and Regards,
    kaviprashu

  • HT1349 I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

    I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

    Leigh...
    but cannot do this because I cannot access Mac App Store
    If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
    It's ok to do this even you are already running v10.6.8.
    Plants vs. Zombies, and that is all for additional software on here
    FYI:  Some third party software can cause issues with the App Store >   Mac App Store: Sign in sheet does not appear, or does not accept typed text
    Apple is not responsible for incompatibility isssues with third party software.

  • Whar are logical table, Physical table Logical data Source

    Hi,
    Can any one explain me in details what Whar are logical table, Physical table Logical data Source.
    Any qucik help will be graetly appreciated

    In OBI there are three layers - Physical, Business Model and Mapping (BMM) and Presentation.
    As the name specifies the Physical layer mainly contain physical aspect of the application like which connection to use, which schema (also catalog in case of SQL server) to connect and also which table to use. This layer confirms the PK_FK joins for the related tables. This layer mainly depicts how the data has been stored in the database layer.
    On top of this layer you will have you BMM layer. The place where all work of a developer starts. You will structure the tables accourding to the business need. The structure has to be a STAR schema. All the entities in this layer are called logical because they do not directly represent any database object rather they provides a logical mapping to the database entities. This becomes clear when you use more that one Logical Table Source (LTS) for your logical tables. One logical column can map to N number of physical columns based on context. You can also create calculative columns in this layer which are totaly logical in nature.
    I am not writing anything on Presentation layer as it is not in you question. :)
    Hope this will help.
    Regards,
    Somnath

  • This Entry Already exists in table (Message: 131-183)

    Hia All,
    I have a very serious problem that's I have been unable to solve on my own.
    I have a User defined form that is linked to a User defined Object. The Object consists of a Master data and a Master Data Lines table.
    I am able to add a record without any problem, but I attempt to update an existing record I get the following error: "This entry already exists in the following tables..."
    Strangely, this only happens when I add iditional records to the Lines table, and not when existing data is altered.
    Please help me.

    Hi Ben, yes I was able to solve the problem.
    It seems that when you add additional rows to your lines table, you have to manually add the records to the DBDatasource on the before action. i.e. Catch the Item Pressed before action on item 1 (OK button), and manually insert the additional lines into the DBDatasource as displayed below.
    e.g.
    i = oForm.DataSources.DBDataSources.Item(1).Size
    oForm.DataSources.DBDataSources.Item(1).InsertRecord(i)
    oForm.DataSources.DBDataSources.Item(1).Offset = oForm.DataSources.DBDataSources.Item(1).Size - 1
    oForm.DataSources.DBDataSources.Item(1).SetValue("U_ItemCode", i, Code)
    This code will typically reside insode a loop seeing as you will loop through your matrix/grid rows and add the additional lines.
    This sorted out the problem for me, I hope it hepls you.

  • Using of already existing logical tables and columns in a new subject area.

    Hi Every one,
    i am new to OBIEE technology.
    In my project i need to create a new subject area for already existing RPD.
    In that RPD there are some logical tables and column created for previous project and i need to use those in this new subject area that i am going to create.
    My question is what is the best way to use them .
    I mean just to drag and drop them into new subject area or any other way.
    please have your valuable suggestions
    thanking you

    Yes, you can basically copy paste all the tables that you need from BMM layer into your new folder in the presentation layer. Just make sure all the joins are defined well between all the tables that exists in the new folder, so you wont end up running into ODBC errors when you run analysis.
    Hope this helps.
    Thanks,
    -Amith.

  • Need help with Sharepoint foundation web application stuck on "STOPPING" error job-service-instance-GUID Number already exists

    Hi All,
         I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
    I have tried the following:
    reset IIS
    restarted the Timer Service
    When I try to use powershell command to stop I get the following error:
    Can anyone who went through this help PLEASE
    Stop-SPServiceInstance : An object of the type
    Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
    "job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
    under the parent Microsoft.SharePoint.Administration.SPTimerService named
    "SPTimerV4". Rename your object or delete the existing object.
    At line:1 char:127
    + ... pplication"} | Stop-SPServiceInstance
    + ~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
    SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
    ception
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
    iceInstance

    Hi,
    It seems that the issue is in the timer job definition for executing this operation.
    My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
    This might be helpful:
    http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job 
    I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
    As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm. 
    BR,
    Ivan

  • How to create olap cube using Named Query Table in Data source View

     I Create on OLAP Cube using Existing Tables Its Working Fine But When i Use Named Query Table with RelationShip To other Named query Table  It Not Working .So give me some deep Clarification On Olap Cube for Better Understanding
    Thanks

    Hi Pawan,
    What do you mean "It Not Working"？ As Kamath said, please post the detail error message, so that we can make further analysis.
    In the Data Source View of a CUBE, we can define a named query. In a named query, you can specify an SQL expression to select rows and columns returned from one or more tables in one or more data sources. A named query is like any other table in a data source
    view (DSV) with rows and relationships, except that the named query is based on an expression.
    Reference:Define Named Queries in a Data Source View (Analysis Services)
    Regards,
    Charlie Liao
    TechNet Community Support

  • SAP Note Number: 852443 | Runtime Error MESSAGE_TYPE_X in Data Source over HANA Source System

    Hi,
    I am facing an issue for Inconsistency in Delta extraction due to a Init Request Mismatch.
    I found out an SAP Note 852443 for the same and it provided me with a workaround solution for the same.
    But , this Issue is frequently reappearing for the same Data Source and I need to find a permanent fix/solution for the same.
    Kindly help me in this.
    Thanks,
    Vimarsh

    Hi.....
    I have gone through the SAP note......what I have understood I will explain you....
    1) You need to compare the Init request (ex : REQU_44H2K09BTG5799G2JXCORI1O5) in both BW and R/3 side....both should be same......
    In the R/3 side the value of the field : RNR of the table :RSSDLINIT should match with the value of the field : INITRNR of the table ROOSPRMSC in the R/3 side.....
    2) If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).........this step is very simple.......
    3) But the confusion arrise when value is there in the table RSSDLINIT in the BW side.......then check the same Request number in the table ROOSPRMSF and ROOSPRMSC tables with the INITRNR field.
    If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers...............it means if the value doesn't match or multiple values are there then also same solution ...........i.e...........use transaction RSA7 in an OLTP source system to delete all entries ...............then use the Program : RSSM_OLTP_INIT_DELTA_UPDATE  and then delete all init selections in the 'Scheduler/Init selections in the source system' menu in the InfoPackage.......
    4) But if it is a DataMart datasource that is a Export Dtasource then the solution is different.........starting with 8
    But I don't want to confuse you.........first check whether is is a Export Datasource or not.....
    Regards,
    Debjani.....

Maybe you are looking for