Sequence Number Generation

Hi,
I want to generate sequence number to Particular Column whenever a new record is created .i.e when i create SR the column value should be 1,2, 3....
how to achieve autogeneration of number while creating records

The reason why you can't do this is because, system referes the Row id while creating the SR number. which comes from the database table. you can not control that. As venky suggested, you can achieve this by using webservices to call the external system which will generate the SR number in series and assign it to your CRM SR.
All the best.
Nisman

Similar Messages

Enq: TX - row lock contention in forms 10g sequency number generation

Iam Getting the Deadlock issue in oracle formdeveloper 10g database is 11g Acutually in our small Hospital organization using different forms generating entrying labrequest form finally save time
one sequency number will generated i have give procedure below every save criteria form using below procedure some time iam getting lock iam using blocksession query i have find out some
OSUSER
MACHINE
TERMINAL
PROGRAM
SQL_ID
LOGON_TIME
BLOCKING_SESSION_STATUS
BLOCKING_SESSION
EVENT
user423
UMCCDOM\LEVEL4-MICU
LEVEL4-MICU
PrjMcr.EXE
0ccngw7dfkmgb
23/09/2013 11:34:41 AM
VALID
277
enq: TX - row lock contention
SYSTEM
WORKGROUP\PRIAPPSVR
PRIAPPSVR
frmweb.exe
0ccngw7dfkmgb
23/09/2013 11:32:50 AM
VALID
186
enq: TX - row lock contention
SYSTEM
WORKGROUP\PRIAPPSVR
PRIAPPSVR
frmweb.exe
0ccngw7dfkmgb
22/09/2013 2:49:47 PM
VALID
277
enq: TX - row lock contention
SYSTEM
WORKGROUP\PRIAPPSVR
PRIAPPSVR
frmweb.exe
0ccngw7dfkmgb
23/09/2013 7:00:22 AM
VALID
186
enq: TX - row lock contention
user290
UMCCDOM\LEVEL2-N
LEVEL2-N
PrjMcr.EXE
0ccngw7dfkmgb
23/09/2013 10:28:06 AM
VALID
277
enq: TX - row lock contention
lock are happen after open the code i have find out used FOR UPDATE in procedure please tell me any alternative for this every labrequest form saving time using this procedure for generating prefix sequence number multiple user using with different systems
PROCEDURE   Gsp_GenSeqNum (I_SvPrefixCd IN VARCHAR2,I_SvUserName IN VARCHAR2,
                          O_SvSeqNum OUT VARCHAR2) IS
--This Procedure generates the sequence number
--by retrieving the prefix based on the code
--supllied to the procedure.
CURSOR crSeqGenerator IS
         SELECT Gsn_prefix_last_num, Gsn_prefix_year
            FROM G_SEQUENCE_NUMBER
         WHERE Gsn_prefix_Cd = I_SvPrefixCd
               AND Gsn_prefix_year = TO_CHAR(SYSDATE,'YYYY')
FOR UPDATE OF Gsn_prefix_last_num;
udSeqNum        G_SEQUENCE_NUMBER.Gsn_Prefix_last_num%TYPE;
udNextSeqNum    G_SEQUENCE_NUMBER.Gsn_Prefix_last_num%TYPE;
udYear          G_SEQUENCE_NUMBER.Gsn_Prefix_year%TYPE;
udPrefix        G_SEQUENCE_PREFIX.Gsp_Prefix_Value%TYPE;
BEGIN
SELECT Gsp_Prefix_Value
INTO udPrefix
FROM G_SEQUENCE_PREFIX
WHERE Gsp_Prefix_Cd = I_SvPrefixCd;
OPEN crSeqGenerator;
FETCH crSeqGenerator
   INTO udSeqNum,
        udYear;
IF crSeqGenerator%FOUND THEN
     udNextSeqNum :=udSeqNum + 1;
     O_SvSeqNum     := udPrefix||'/'||TO_CHAR(SYSDATE,'YY')
                               ||'/'||LPAD(TO_CHAR(udNextSeqNum),6,'0');
ELSE
INSERT INTO G_SEQUENCE_NUMBER VALUES(I_SvPrefixCd,TO_CHAR(SYSDATE,'YYYY'),0,I_SvUserName,SYSDATE);
     udSeqNum      :=0;
     udNextSeqNum :=udSeqNum + 1;
     O_SvSeqNum:=UdPrefix||'/'||TO_CHAR(SYSDATE,'YY')
                         ||'/'||LPAD(TO_CHAR(udNextSeqNum),6,'0');
END IF;
UPDATE G_SEQUENCE_NUMBER
     SET Gsn_Prefix_last_num=udNextSeqNum
   WHERE Gsn_Prefix_Cd = I_SvPrefixCd
     AND Gsn_Prefix_year=TO_CHAR(SYSDATE,'YYYY');
CLOSE crSeqGenerator;
END Gsp_GenSeqNum;
Thanks
subbu

This application is inbuit with some modules VB (cath ,cardio)and oracle forms for required sequence number generation different time used this procedure whereever required the sequence Prefix generation.If i replace the procedure sequene to oracle standard sequency if the user cannot save the form unnessary sequency generated order is missing from sequence.

Sequence Number Generation in XML Form Buider??????

Hi All,
I want to generate some Sequence Number for each XML Form Generated by the XML Form Builder Application?
Ex: my XML Form Builder Application is "MYAPP". Using this I filled data and Save, then an XML will be created, then it should have some unique Number(say 1234), then if I fill the differennt Data and Save, then another XML will be created. For this the Number should be 1235, next 1236, ........
I can use the XML Form ID, but that is not User friendly format. Becaz I need to display this Number to the End User.
(Example: 10b2ae7b-e269-2b10-d88e-ddade2e62015.xml)
If anybody have idea on this, Please guide me...
Thanks&Regards||
Ashok M.
Edited by: Ashok Kumar Munugoti on Oct 16, 2008 8:04 AM

closing this Thread.

Help me in sequence number generation

hi
i had written a JSP which reads and displays the all the directories in that pertucular folder
when i click on a perticular folder it should read each and every file in that folder and it should rename it with a sequence number
i.e file0001,file0002,file0003 etc....
the sequence should be reset for each folder and if i add some new files in to diretory it should remember last sequence number and it should assign next number onwards to those files.
at any point of time i may move or deete any file
but each and every foler i should keep track of last sequence number assigned so that next onwards i can reame new files from that number
another constraint is i may delete the files in that directory
i am new to java
so PLZ help me how effeciantly i can write a program
if so PLZ provide me an example
thanks in advance

when i click on a perticular folder it should read
each and every file in that folder and it should
rename it with a sequence numberShould the files in the underlying file system be renamed or is this "renaming" just an abstraction layer you maintain yourself? In that case you can use JTree of Swing to maintain an own file structure on top of the OS. You just map "your" filenames to the real file names underneath.

Sequence Number Generation with Global Container

Hi ALL,
Can any plz send me the steps of using global container for generation seqence number's
And also if possible send me the code.
Thanks & Regards
Rupash

Hi Rupesh,
chack this code:
public String seqNumber(Container container)
      int i;
      GlobalContainer global=container.getGlobalContainer();
      String getnum=(String)global.getParameter("a");
      if(getnum==null){
                 global.setParameter("a","1"); i=1;
      else{
            i=Integer.parseInt(getnum); i++;
            global.setParameter("a",String.valueOf(i));
      return String.valueOf(i);
**Reward points if helpful
--Sankar Choudhury

Help on counter (Sequence number generation)

Hi all,
Need to ask smething about the counter to generate the sequence numbers and pass it to the target field.
If we use the Global containers, then say if the app server goes down, the current count will also vanish. Am I correct?
So thats the case, then we should use the DB lookup for the same?
Also, the INDEX function in the Statistics part in the GUI of Message Mapping, how much that is helpful?
Respond back at the earliest possible.
Thanks in advance.
Neetesh

Hi,
just one point about your sentence: <i>If we use the Global containers, then say if the app server goes down, the current count will also vanish. Am I correct?</i>
For me you are wrong, if your application server shut down during your mapping execution, then you will <b>NOT</b> have an inbound message for your target system, because your system is stopped. And you will have a red flag inside SXI_MONITOR.
Mickael
one question: what is the direction/sense of your flow? "XI -> ZZ" or "ZZ -> XI" ?
Message was edited by: Mickael Huchet

Sequnce Number generation in Message Mapping..

Hello All,
I am using this thread as a reference for declaring a Counter for unique sequence number generation...
Sequence Number in XI Mapping
-> define a global variable by clicking the JAVA_SECTION_TOOLTIP icon on the design tab of source message type of ur message mapping.
enter the following in the GlobalVariables Section
Integer counter =0;
-> define a user defined function (SeqGen let's say)
write the following code in it.
Integer seq = 0;
GlobalContainer globalContainer = container.getGlobalContainer();
a = globalContainer.getParameter("counter");
seq = globalContainer.getParameter("counter");
seq = seq + 1;
globalContainer.setParameter("counter",seq);
return a;
now use this user defined function (SeqGen)in all ur mappings to the sequence no of ur line items.
If u could just elaborate on creation of UDF.. on what are we goin to pass in the variable 'a'... while creating the UDF. ??
Harpreet..!!

Hi harpeet,
A UDF can be of two types a Simple UDF and Adavnced UDF.
This is a case of a simple UDF,
A simple UDF returns only 1 element as an output.
here 'a' is such an generated output. you can assign this to any numeric filed of ur target stucture
This UDf does not require any input Field from the message.
These functions are known as generating functions.
Hope this explains.
Reward points if useful.
Regards,
Abhishek

File name generation with sequence number

Hi All,
My scenario is, File to File. I need to generate the filenames at the target side like File1.xml, File2.xml..File9999.xml for each file triggered from source system. The interface tiggesrs multiple times in a day.
For example, for the first time, 5 files triggered, need to generate File1.xml,File2.xml..File5.xml. After some time the interface might trigger with 10 files, then need to generate files as File6.xml,File7.xml....File15.xml . Once the file count reaches 9999 then need to generate the files from 1 (File1.xml)again.
Could you please suggest me the possible solutions. For this any Lookups required?
Regards,
Praveen Kumar

Hi Praveen,
Case 1: If a field in source data carries the information regarding the sequence.
You can map this value ( Directly .. or using some transformation ) in some temporary field in the target and then use a Variable substitution at the receiver communication channel.
Case 2. If the source file name carries the sequence information. then you can enable the Adapter specific settings in the Sender communication channel , and then get the information of the source file name using the Container object in the mapping. Then assign the sequence number to a field in the target , use a Variable substitution at the receiver communication channel.
Case 3 : If Case 1 and Case 2 are not applicable ... then you have to use a Ztable to store the sequence number , a function module to fetch the number , and then use a UDF in which you will implement the RFC call logic.Then the same process .... assign the sequence number to a field in the target , use a Variable substitution at the receiver communication channel.
BR,
Sushil.

How to pass the sequence number of current loop in a for loop in FPGA vi to the host

PCI-7830R
LV 8.2
What I was trying to do is to use multiple DIO to generate pulse at different sequence. Mode one is to automatically sweep from DIO1 to DIO20; mode 2 is several DIOs generate pulse simoutaneously. So I use a case structure to make the selection, in the mean time, I set up two for loop in each case so that I can use multiple pulse generations. For example, in scanning mode, if I set 2 exposures, it sweeps from 1 to 20 then do it again.
Then I need to get the loop sequence number, i of each scenario. So I put an indicator within the first loop, and create a local variable of it and put in the second one. Running the FPGA vi alone, I can see the indicator change in each case from 0 to N-1, N being the for loop time.But in the host vi, I tried to add this indicator as an element in the read/write invoke method, in the debugging mode, I could only see it directly jump to N-1 without all the changes I saw in FPGA vi.
Is it possible to get this number passed correctly from FPGA vi to the host vi? Thanks

Thanks for the reply Jared.
Excuse me if it looks incorrect, but I'm new to FPGA programming, so I would have to look into the FIFO you referred to. I used local variables because for one thing I have several different cases containing for loop in each of them, and I only want one indicator for the "i". If I put the indicator out of any for loop, it's only gonna show the last number which is N-1. For the other thing, it seems like property nodes are not allowed in FPGA vi. And by doing this, I can see the i number changing from 0 to N-1 in each case, well, in FPGA vi's front panel. But while I ran the host vi with everything, the indicator in host vi's front panel only showed the last number N-1. It may be the reason you said, it happened too fast before the indicator in host vi can catch it.
What I want to realize is to group the data I collect in host vi, for example, when I choose multiple exposure in each mode, and the FPGA runs 1 through 20 then do it again, I want the data stored in two groups using the loop sequence number as the seperator in file name. So it goes like 1-1, 2-1.......20-1; then 1-2, 2-2,.....20-2.

Error While Generating Sequence Number. Contact your system Administrator

Hi All,
I have developed a form to provide our client with 'an easy to fill' User Interface. This form will be used instead of the standard form present in Business Suite.
Some columns of the table, on which form is based, are getting populated via generation of sequence numbers.
Now the problem is, after deploying custom form developed by me in the instance, Standard form is showing this error
" Error While Generating the Sequence Number. Please contact the System Administrator "
I am unable to trace why this error had started appearing..
Any suggestions would be of great help...
Thanks in Advance,..

Forms version 6i,
Database version 9.2.0.6.0
Sequences which I am using are used there in Standard form also..
So evrytime i need to save the record, I am selecting NEXTVAL of it into
the respective item of the datablock..

How to Create an Custom Employee Number Generation ...

Dear Friends,
We are Implementing HRMS Suite Version12i, for one of the Client in Middle east.
One question about Custom Person Numbering.
How to create custom employee numbering Based on the User Person Type?
Example:
Two person types
o Permanent Employee
o Probationary employees
We Need to give two different numbering schemes for each person type.
eg Permanent Employee will use a seq begin 100000 whereas Probationary employees (other user type) will use a sequence beginning 200000.. Can any pls let me know how to handle the Custom Employee Number Generation (with Setups)
With regards
Swpana

Hi,
Could you please help me to write/or send a sample of a Person Number Generation Formula.
I don't see the noteid : 279458.1 on metalink,I get the following message:
Article or Bug cannot be displayed. Possible reasons are:
The article Id or bug number was entered incorrectly. Please check and try again.
The article Id or bug number does not exist (was referenced incorrectly).
The article or bug is not classified as publicly accessible ("non-public").
The content is being updated and it is temporarily unavailable but will be made available again soon.
If you still have questions about why you could not access this article or bug, please use Feedback.
Please help!!

Customer number generation

Oracle Gurus,
Customer creation number generation as Automatic, where we are doing this setup in applications.
For supplier we give the setup in Financial options but I am not able to trace out for customer automatic number generation.
If anyone know the setups, please let me know the steps and setups.
Please advise.
Edited by: satish.ygl on 09-Sep-2012 19:21

Hi Satish,
Set the sequence number
Pl. go thru following navaigation path :
Go to Application Developer responsibility >Menu > Application> Database > Sequence
Query on sequence RA_CUSTOMERS_NUM_S and set Start Value to 20000 .
Retest it.
HTH
Sanjay

Problem with "Number Generation Program'

Can someone please help me with my Number Generation Program. I am new to java and I am at a sticking point. I want to develop a program that will do the following:
1. Accept a set of numbers (6 numbers per set).
2. Remove duplicate numbers.
3. Generate unique set of numbers (6 numbers per set) using only the numbers that were originally entered.
example: -> numbers entered: 12 33 45 51 7 10
5 34 33 8 11 21
5 6 13 9 10 51
duplicate numbers removed: -> unique numbers
12 33 45 51 7 10
5 34 8 11 21 6
13 9
Final result: -> generate unique set of numbers only using the above unique 14 numbers
5 6 7 8 9 10
5 6 7 8 9 11
5 6 7 8 9 12
5 6 7 8 9 13

I am having a problem with the following:
1. accepting the numbers
2. removing duplicate numbers
3. generating the number sequence sets
As I mentioned earlier, I am new to java. I just completed my first java class and I wanted to develop this program.

Employee and contractor number generation

We are implementing Oracle HRMS Rel 11i. We would like to record regular employees and contractor details. For contractors, we need to track and report on their assignments (department, job, location) and payrate alongwith their general information. So I feel that contractors should correspond to 'Employee' person type. A further requirement is that the employee/contractor number generation needs to be automatic and separate ranges (employees starting with 1 and contractors starting with 5000) need to be used. Is it right to set contractors as employee type and is automatic number generation using separate ranges possible?

Yes, you should have contractors as employee system type, otherwise you can not pay them.
we can not define a sequence to that with out wirting custom code.
But we can do it by creating either a new user person type or user status (on assignment) and use that to track the contractors. which also gives you flexibility in reports, by filtering the assignment status or person type, which ever you want to configure.

RTP Sequence number jump

Hi!
I am using a j-ogg library to play an ogg files. From j-ogg library i am using a demultiplexer and codec. I have an OGG file as input and ULAW RTP stream as output.
All fine, but i have discovered that each outgoing RTP packet have a sequence number jumping from previous packet by 2 or more... always... This is correct RTP stream (Wireshark plays it correct). But device that need to play that RTP stream (Cisco phone) excpect that RTP packets sequence number increase by one.
Can anyone point me where are rtp packets creating to fix this issue? Is it problem j-ogg liobrary or JMF?

During compression of an RTP stream, a session context is defined. For each context, the session state is established and shared between the compressor and the decompressor. The context state consists of the full IP/UDP/RTP headers, a few first-order differential values, a link sequence number, a generation number, and a delta encoding table. Once the context state is established, compressed packets may be sent. It is admitted by RFC 2507

Sequence Number Generation

Similar Messages

Maybe you are looking for