Sequence of activities during Cutover and Go-live

Hi SDN team
Can you please help me on list of activities in sequence to be done during Cutover and during Go-live?
I would be grateful, if you can provide me the details at the earliest.
have a great day
Regards,
Sasi

Hi,
the general activities..
1. Cutover meeting with the steering Committe
2. Ask the client to stop his activity for cutover period.
3.Transporting the requests one by one...to prod
4.Analysis of the Configu
5.uploading the Master data
6.uploading transactional data
7.Analizing the request status..
8.Checking various Tcodes without Saving..
apartment from the above there will be various documentation activities...etc....
Thx
Raju

Similar Messages

  • Workflow Upgrade 4.6C to ECC6 - manual settings during Cutover

    Hello Guys,
    We are upgrading to ECC 6 from 4.6C  and we are on release 701 & support pack SAPKB70106.
    I would like to know which are the "Manual activities" that needs to done during cutover and WHEN should these should be done (eg. before ECC6 upgade, or after ECC6 upgrade but before config/dev transports, or after config/dev transports).
    I have looked on few SDN threads and found the following info. Please correct me or add extra info if i have missed something:
    1. Configure RFC destination & WF user info in Transaction SWU3.
    2. Run Transaction SWU_OBUF to clear the runtime buffers before users start Testing.
    I assume rest of changes would be imported with transports, but i have read through lot of SDN threads that all custom Workflow definitions needs to be ACTIVATED in each system (DEV - QAS-  PRD)  and custom BOR objects needs be REGENERATED in each system (DEV - QAS-  PRD). Also, do I have manually set the agent assignement for Customer Task as GENERAL TASK in each system?  Are above stated 3 steps needs to be manually done in each system or transports take care of them ? I am bit confused. Could anybody please advise me regarding the Manual Task/activities that needs to done in each system during cutover during WF upgrade from 4.6 C to ECC6.
    Thanks for posting excellent stuff regarding the Workflow Upgrades on SDN. It really helped me in resolving most of my issues.
    Thanks in advance
    Kind Regards
    Sam

    Helli Viji,
    Thanks for the information. I still have some doubts.
    Yes , as you have mentioned there are many other mandatory settings in Transaction SWU3 that needs to be maintained in each system. I hope these settings are imported with the Customizing tranport request created in DEV or Do we have to maintain these manually just in case of Upgrade.
    For transporting the Agent assignment from one system to another, can we use Transaction RE_RHMOVE30 ? Or this functionality do not works when upgrading to ECC 6 from 4.6 C.
    Is there any other activity I am missing that needs to done during Cutover when upgrading from 4.6C to ECC 6 with regard to Workflows.
    Thanks
    Regards
    Sam.

  • Sequence of Activities & Divestiture

    Our 4.0 implementation uses the default COI sequence of activities below:
    Seq #     Act.     Activity text                   Stop here
    1     01     First Consolidation     
    2     16     Horizontal Merger     
    3     04     Amortization of Fair Value Adjustments     
    4     05     Increase in Capitalization     
    5     06     Reduction in Capitalization     
    6     07     Step Acquisition     
    7     08     Partial Transfer     
    8     09     Total Transfer     
    9     17     Vertical Merger     
    10     10     Partial Divestiture                           X
    11     11     Total Divestiture     
    12     12     Liquidation     
    13     13     Reclassification of Treasury Stock     
    14     14     Amortization of Investment     
    15     15     Writeup of Investment     
    16     02     Subsequent Consolidation     
    17     03     Amortization of Goodwill     
    18     18     Distribution of Dividends     
    When we recorded an end-of-period total divestiture (via AFD), the COI log does the following:
    1.     Partial divestiture from 100% to 0% - reversing first consolidation elimination of investment, recording 100% to minority interest balance sheet, and recording gains
    2.     Subsequent consolidation – because ownership is now considered 100% the entire earnings for the period of divestiture is recorded as minority interest
    3.     Total divestiture – reversing first consolidation elimination of equity, reversing minority interest balance sheet from partial divestiture above, and gain for earnings of period of divestiture
    What bothers me is that subsequent earnings recoded 100% minority interest. Why would this occur when the divestiture is at the end of the period per the master data? Should the activity sequence number for subsequent consolidation change to a number lower that for partial and total divestiture, but remain after the Stop? If so what are the consequences?
    The only other alternative I can think of is to leave the activity sequence alone and record the divestiture at the beginning of the next period.
    Any help with this is appreciated.

    Dan,
    Been looking at this myself these last few days.  I know conventional wisdom is to not touch the sequence, but I can't see the delivered sequence working correctly (ever) in the case of divestitures if there is activity in the period.  As discussed, perhaps this is what makes people chose the DABP option.
    In addition to your case with the M/I due to the subsequent consolidation, if you were to issue a dividend in the period of divestiture that dividend income would be reclassed to minority interest as well.
    My solution on the dividends to was to bring the activity above the partial transfer step, with the reasoning that in the event of a transfer you would be dividending to the old parent, not the new parent.  Testing so far of our likely C/I activites seems to work with the sequence as desired.
    For the subsequent consolidation I'm also having issues that we've PL30 topsided around, but I wouldn't want to do that in a transfer because of the income statement adjustments that would be necessary and the statistical account impact.  In a future total divestiture activity, the gain/lose would be incorrectly calculated unless I got those statistical balances spot on to agree with the manual PL30.
    I suspect the subsequent consolidation should be after the total transfer or vertical merger, with the reasoning that this activity should be performed in the new parent (err...cons group) in this case.  Haven't had a chance to test all our likely activities with this scenario, but will probably need a solution real soon.
    I'm familiar w/ this note on the topic, wihch is essentially the help.sap.com documentation in a little more technical detail:
    https://service.sap.com/sap/support/notes/698955
    But I'm not aware of any other documentation on the subject.
    Finally....I remember when I took the SEM240 class a while ago they harped on not touching the default sequence, but those of us in the room with a live implementation had all changed from the default sequence.
    Anyway...I don't really have a question or helpful info.  Just surprised there's nothing more on the topic.
    Chris

  • Audio lag from Canon XHA1 speaker during log and capture

    Hey All,
    I'm working with a Canon XHA1. I'm logging and capturing video shot in HDV (1920 by 1080) @ 60i, . I can see the video on screen but the audio playing back from the camera is about half a second behind what I'm seeing on screen.
    My video monitor on the camera sincs up fine with the audio during this process AND my final capture is fine. It's just hard to work with this audio delay during the log and capture.
    Is this a settings issue? I don't think I can monitor sound through the computer during log and capture, right?
    Here are my settings:
    Sequence preset:
    HDV - 1080i60
    Capture preset: HDV
    Device control preset:
    HDV Firewire Basic
    Video Playback: None
    Audio Playback: Default
    Any suggestions?
    AND can anybody tell me what Apple Intermediate Codec 1080i60 means?
    PowerBook G4   Mac OS X (10.4.5)  

    Oh, and I neglected to mention I'm using a MacBook Pro running 10.4.10 and I'm running FCP 5.1.4
    Thanks in advance.

  • How to Upload WIP Production orders in production during Cutover.

    How to Upload the Open Production orders in production system during cutover activities.
    my client is having 1000 open production order(WIP), during cutover activies how to upload this in production.
    Please guide me
    Regards
    Sunil Patil.

    Hi,
    I somewhat agree with what Raj has to say. Something which is already in process how can that be uploaded, how can one compensate for the time which has been consumed in the production activity.
    I hope Rupesh Brahamakar sir would throw light on this issue, as most of us are under the dillema at the time of Cut-Over activity.
    Sir, hoping your valueable inputs.
    Regards,
    Harris

  • COIu0085 Sequence of Activities

    There are 3 consolidation task seen for period end:
    Data Collection .. Investment Data
    Data Collection…Sequence of Activities
    Task COI execution.
    I understand with investment data we load the changes to investment during the month. What is the context in which the sequence of activities has to executed.
    What is the real purpose of executing sequence of activities loading along with loading AFD of investment data?

    Hi Dan,
    Thanks for the inputs.
    There is a data stream for ' Sequence of activities'.
    How does it gets filled or updated?
    I have seen an another project document where the ' sequence of activities' is appearing in the data stream load..

  • Migration of Sequence of Activities ODS - mapping & aggregation by periods?

    Sequence of Activities ODS Migration via text upload/ODS Copy
    As part of our data migation, we are considering migrating the ODSs (as per SEM-245 document info and also on help.sap.com)
    Fields of some concern to me for this ODS;
    0BCS_COIFU Execute Previous Activities - this is blank source system, so I do not need to worry in migration, any concerns?
    0CS_COIAC C/I Activity - this is the same in source and target, but I'm concerned about losing initial activities due to having a different starting date (see TIME fields below)
    0BCS_SEQNU Sequence Number - this appears to be a sequential number (but there is not a starting point of 0001 in the source system), can I map this as is, or should I re-number from 0001?
    0CS_COINR Activity Number - this is just a number range, so I need to ensure that either the target system includes the numbers or I convert to suitable number range for the target - any pitfalls here?
    INVESTEE UNIT
    Z_xxx Investee Unit
    For Investee unit we will be mapping from many to one and some divested units will not be relevant in our migration periods, what problems would occurr if I excluded redundnat records that do not exist in the new system?
    - eg if we cut out the ODS records for unit divested in 2006, will the sequence numbers etc, above, be out of synch?
    - conversely, if we migrate all of the ODS records but the divested units do not exist in the target system, what will we face?
    TIME fields
    0FISCPER3 Posting Period
    0FISCYEAR Fiscal Year
    We are aggregating data for our initial periods (eg source system starts in 2006 but target system starts in 2009), can we aggregate postings to the next period in the target system?
    (eg Activity is 1 first consolidation in p12, 2006 and 2 subsequent consolidation in p6, 2007 but we aggregate this into the target ODS as Activity 1 = p12, 2009 and Activity 2 = p12, 2009)
    I hope this question isn't too large, no need to answer everything, please let me have any feedback on any of the fields.
    Thanks,

    0BCS_COIFU - I agree that there is probably nothing to worry about for this
    0CS_COIAC - have to think a bit on this one, no suggestions at this time
    0BCS_SEQNU -not quite sure, but I would map as-is
    0CS_COINR - I agree with your assessment and do not see any pitfalls
    Excluding redundant Investee unit records is necessary isn't it? I am not certain, but do not think the activity numbers necessarily have to be in synch or chronological. It might be worth askling SAP though. For the alternative of migrating all of the ODS records but the divested units do not exist in the target system, couldn't you create the master data for these and simply exclude them from the hierarchy?

  • Anyone else haveing trouble pausing and rewinding live TV???

    This is very frustrating, seems to be HD more than anything, you hit pause and 30 seconds later it pauses then try to rewind and it takes a minute to rewind about 10 seconds. I'm not new to this, there is a decent buffer when I try this and I have reset the receiver, to no avail. this has been an ongoing problem for a while now and is very disappointing especially during NFL playoffs and especially since Verizon is charging us money to do just this. Verizon, don’t advertise being able to pause and rewind Live TV when we cant and don’t charge us for it, THIS NEEDS TO GET FIXED!!!

    the pause and rw functions work fine. If you are having a problem with it, call tech support. Think about it, if there were problems with the funtions, Verizon would not be able to rent DVR's. While the DVR's do have some problems, the storage is too small, there are issues with the HDMI cables, the guide is frequently wrong, and the multiroom functions can be a bit flaky but the basic functions work normally.
    Before calling tech support you can try this...
    go to menu--->settings--->system information
    when on the system information screen type these codes....
    8888            this will flush crash logs that may be filling up the memory
    2617            this will clear the nvmem
    2601            this will reboot the stb
    There are other codes but I've found that whenever my stb starts acting up, these 3 in this order will fix the issue. cant hurt to try.
    ====================================================================================
    Error exists between keyboard and chair.

  • No Audio during Log and Capture

    Hello, I have FCP 6.0 and am unable to hear my audio during log and capture. I have this problem on all 5 G5 Macs that I have, and have tried different editing docks and cables. I have used FCP for more than 5 years and have never had this problem. iMovie has audio during capture, so I am convinced that there is a pre-set in FCP that I don't have checked properly, but I've been over them many times and still have no answer. I searched past forums and didn't really find anything helpful to me.
    My pre-sets are set to DV NTSC 48kHz and the playback pre-sets are set to default. I can hear audio of my clips after I log and capture, but I still need to hear audio during importing. I'm more confused than anything. If anybody has had this problem before or any suggestions for me, I'm all ears.
    Thanks.
    John

    ... as Bogie says.
    However... this is a non-feature that dates back to slower CPU days... yet, still with all the different formats and such I (ME!!) I believe it's still good practice to leave it off.
    Devoting as much CPU work to the capture process lessens the chance for something to go wrong. You can easily monitor the audio directly out of the deck as needed.
    Sure -- octo cores need 30 apps open just to get your money's worth and I'm sure you won't have any issues using an 8th of one to send audio thru itself while the other 7 and 7/8ths are used for capture... but who wants to risk it?
    Not me... I'm to old to change my ways.
    Blast you FCP v1.2.5 on a beige G3 with 7gig and 15gig hard drive -- you taught me well.
    CaptM

  • My weather app is telling me it's 17 degrees and I live in Phoenix Az. Please help

    MY weather app is not displaying the correct weather. It's telling me it's 17 degrees out and I live in Phoenix Arizona. Any suggestions?

    Check the settings, it might be on Celsius and not Fahrenheit.

  • HT201365 How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    Change your country on iPhone, iPad, or iPod touch
    Tap iTunes Store, App Store, or iBooks Store.
    At the bottom of the Featured page, tap Sign In.
    If you're already signed in, skip to step 5.
    Tap Use Existing Apple ID.
    Enter your Apple ID and password and tap OK.
    Tap your Apple ID.
    Tap View Apple ID or View Account.
    Tap Country/Region.
    Tap Change Country or Region.
    Tap the Store menu and tap your country.
    Tap Next.
    Review the Terms and Conditions and Apple Privacy Policy.
    Tap Agree if you agree to the terms and conditions.
    In the prompt that appears, tap Agree.
    Select a payment method and enter your payment information.
    Enter your billing address and tap Next.

  • Zen Micro Freezes during play and sometimes won't turn on at

    I have been having some issues with my micro and wondered if anyone could help. I didn't drop it or do anything I can recall to cause these issues, it just seemed to start out of the blue. 2 things are happening. Sometimes it will freeze during play and "buzz" (it's really just transmitting a countinuous sound of a millisecond of what it was playing like if the guy was saying apple, and it freezes when he starts to say it it will sound like "aaaaaaaaaaaaaaaaaaaaaaaa" but in a completely illegible buzz way). Second, it will sometimes not turn on at all, no creative logo, no lights, no nothing. Once I take out the battery and replace it, it will always then start no problem. The battery does not seem to be loose at all as the above mentioned buzzin will not stop until I remove the battery, and as I have repeatedly removed the back of the micro during these buzz session?the battery remains firmly seated and the buzzing continues until I remove it. So far I have updated the firmware to 2.2.02 (which I believe reformatted) which didn't stop it from freezing up during play, and just now did a disk clean up (which I can't imagine will have any change?if a complete format didn't). I haven't had the start up problem since the firmware update, but I haven't turned it on and off that many times yet. Any ideas? Sorry to be so verbose but I wanted to explain as best as I could what's wrong, and what I've done so far.

    Remove SIM and miniSD card first. Try to boot.
    The try hooking it up to the PC again. And see if you might be able to redo the update process.
    You can also try a hard reset. As described in a different tread. (Or read below).
    Othervise, I afraid you will have to take it to a Service Center.
    -- Quote from djassa1 (Re: N80 won't start up!)--
    Just reset to factory default.
    You will need your 2 hands to do that: While the phone is off press and hold the [Green call Button] + [3 digit button] + [* button] and power on and hold the powwer button. Do that until the phone asks you for the local city reference.
    -- End Quote --
    Best of luck!

  • HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

    if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
    please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

    Just connect it to a computer's USB port.
    Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

  • I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each.  Now again I'm getting that same $38 charge. I can

    I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each.  Now again I'm getting that same $38 charge. I can't  believe that the monthly CT tax is higher than the payment for the phone itself. Does this make sense. Last time I spoke with them on the phone it was for 1 1/4 hours for something simple. I don't want to call unless I need to. The salesman told me nothing about any of this. Thank you for any help you can offer.

    The bill from last month states:
    CT state sales tax**     $38.10
    ** In some states sales tax or surcharges are calculated on the full cost of the full retail price or VZW cost of the device you purchased and not on the discounted price you pay. The sales tax or surcharges charged on your device was based on $599.99 and appears on this first bill.
    The current bill says the same.
    Actually, now I'm realizing that last month's bill stated I was making the first payment toward the phone. Now this month also says it's the first payment toward the phone when it's really the second.

  • I just bought this iPhone 4S second hand and during incoming and outgoing calls I can't hear the other person talk unless it's on speaker or if I have headphones in. I don't know what to do I've turned up my volume and checked my settings!! Need help

    I Just bought a second hand iPhone 4S I am having issues with the hearing during incoming and outgoing calls, I have turned the volume up and checked my settings but I still have trouble hearing the other person speak. It works if it's on speaker or if I have headphones plugged in. I need help desperately!!!!! Any suggestions on what to do???

    Hey Itsanaasaunders,
    Thanks for the question. I understand that you are experiencing issues hearing sound while on a call (receiver wise, not speakerphone). The following resource provides troubleshooting steps for this symptom:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    http://support.apple.com/en-us/HT203800
    Clear the receiver
    The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
    Follow these steps, testing after each:
    - Make sure nothing is blocking the receiver, such as a case or film.
    If you have a new iPhone, remove the plastic film on the front and back of the device.
    - Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
    - While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
    Restart and update
    1. Restart your iPhone and test again.
    2. If there's still no sound or poor sound quality, update to the latest version of iOS.
    Get more help
    If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
    Thanks,
    Matt M.

Maybe you are looking for