Sequence of Installs of RTA and SCA files for GRC AC 5.3

Hello,
I would like to confirm the correct sequence of applying RTA and SCA files for GRC AC 5.3.
On ABAP Stack
1- Install VirsaNH RTA on ECC 6.0 System with SAINT
2- Install VirsaHR RTA on ECC 6.0 system which has SAP_HR
3- Install both VirsaNH RTA and VIRSAHR RTA on a system which is SAP HR
4- Install VIRSANH RTA on BI System. (There is no need of VirsaHR on BI system)
5- Install all Support Packages up to 10 or 11 for VIRSANH & VIRSAHR with SPAM
Next
On JAVA Stack
6- Install
VIRCC00_0.sca
VIRAE00_0.sca
VIRRE00_0.sca
VIRFF00_0.sca
7- Install VIRACLP00_0.sca
8- Then install VIRACCNTNT.SAR
9- Next install EP RTA VIREPRTA00_0.sca
10- Install all Java patches for the above components
Based on the above,
a- Plz confirm if the above sequence is right.
b- My question is can I install 6, 7,8, 9 with JSPM at once as one step?
c- Also can I install SCA files with JSPM first and then install RTA files on ABAP stack later?
d- Also we have BI system with ABAP & JAVA Stacks. Is VIRSANH sufficient for both ABAP & JAVA, or do we need an additonal RTA for BI JAVA ?
Thanks for your valuable inputs in advance.
Regards,
Haleem

Hi,
> 1- What is the UME of your BI Java stack ?
>
> Answer: We have installed BI JAVA, EP, EP Core, so we use SSO with EP and BI ABAP. So the portal is UME for BI Java stack.
>
Check below link which will answer your queries:
Java RTA for GRC 5.3
> 2- Check SAP Note 1174625 - Access Control 5.3 Java Support Pack Installation
>
> I checked the note 1174625, which says the following
>
> All of the sap.com/grc files have to be undeployed except the db and dictionary files for each component. The files that are NOT to be undeployed are:
>
> - sap.com/grc/ccxsysdb
> - sap.com/grc/aedict
> - sap.com/grc/redictionary
> - sap.com/grc/ffdb
>
> Since this is a GRC AC 5.3 install on a fresh Netweaver 7.0 EHP1 Java stack install, do I need to undeploy all the above components, before doing AC 5.3 install, as mentioned in the note.
>
This is used when you do upgrade your old GRC release to latest one. So if you are doing fresh install then you need not to do these steps.
> 3- Also this note 1174625 answers to most of my questions, but does not mention anything about VIRACCNTNT.SAR. Is >this SAR file installed on JAVA Stack or ABAP stack? Is there a OSS note on VIRACCNTNT.SAR?
>
This file contains Roles, Rules, functions for RAR, CUP, ERM etc. in txt files which you need to upload when you will do the configuration of GRC.
Thanks
Sunny

Similar Messages

Installation of .pkg and .mpkg files does not continue. Please help

1. Installation of .pkg and .mpkg files does not continue after password prompt. Please help if anyone have fix this issue. I tried repairing disk permissions but no change.
2. When I do the unlock to make the changes then again that lock does not allow me to unlock again for the particular permission like internet sharing
Mac Mini running OS X 10.7.5

harrymash wrote:
1. Installation of .pkg and .mpkg files does not continue after password prompt. Please help if anyone have fix this issue. I tried repairing disk permissions but no change.
2. When I do the unlock to make the changes then again that lock does not allow me to unlock again for the particular permission like internet sharing
Mac Mini running OS X 10.7.5
What are you trying to install?
Pete

Revert Portal transport package .epa file and .sca file

Hi,
Recently we have imported one transport package .epa file (through transport package import editor) and imported one .sca file (though SDM) in Portal Quality system.
Now we want to revert both the transport package .epa file and .sca file in Portal Quality system.
Can anyone tell us the procedure?
Thanks
Phani

Hi Phani,
You can find the previous version of SDA/SCA's in the following path
Go to SDM -- Deploy tab-- there is little black arrow pointing up in the bottom right corner. Click on it to expand the menu and one of the options will be "Deploy SDAs/SCAs that have any version.
Please refer this link for more information
To undeploy .sca
Hope this helps you...
Regards,
Saleem Mohammad.

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

SCA file for J2EE ENGINE CONNECTIVITY

Hi Experts,
I am looking for the SCA file for the Software Component J2EE ENGINE CONNECTIVITY 7.00 (SP7). I would like download that from Service Market Place. But I am unable to find that.
I found one component called SAP J2EE ENGINE 7.00 (SAPJEE22_0-10003469.SCA). Not sure if this is the same as J2EE ENGINE CONNECTIVITY 7.00 (SP7).
I also tried to search it in s/w download section in marketplace, but did not find any.
Could any one kindly tell me the SCA file and the download path in market place?
Thanks.
Regards,
Sujit.

Mark,
Thanks for your reply.
I have opened both JEE and JEECOR with WinRAR and search all the *.sda & *.jar files.
But the specific file "J2EE ENGINE CONNECTIVITY 7.00 (J2EE-CONN)" is not found.
It seems its integral part of one of this SCAs'.
Please tell me which one of the above contains the J2EE-CONN.
I have a requirement from development team that to import this J2EE-CONN component in NWDI track. Its already present in our SLD as a Software Component, but we are unable to find this anywhere.
Thanks & Regards,
Sujit.

Create .SCA file for MII project

Please let me know the steps in creating .SCA file for deploying MII projects developed using WorkBench with login page. I think that after creating the .SCA file we can deploy it using Eclipse under the menu Deploy View Console or using JSPM. After deploying we should be able to login using the credentials and should be redirected based on roles to appropriate pages.
I had deployed the intial .SCA file named (XMII08_0-20004625.SCA) using JSPM. MII version used is 12.1.8 and Netweaver version is NW CE 7.1 EHP1 SP5.
How we can set up the development environment in Eclipse or NetWeaver Developer Studio for MII project development so that we can directly create MII SCA file from the tool itself. Please share documents if any.

I need to modify the default login page in MII and redirect it to different URLs based on roles.
I am able to change the images in the default Menu.jsp in the NetWeaver login to Authentication page and inside properties tab. There I am able to change the images like branding-image.jpg, SAP NetWeaver image, SAP Image. But this is reflected in both the URLs
http://servername:50000/nwa and http://servername:50000/XMII/Menu.jsp
Then I changed the web.xml inside war file (tcsecumelogonui.war) which is in the path InstanceDirectory:\usr\sap\CE1\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources with the new Login.jsp file instead of Menu.jsp for the servlet tags but still when I access the new Login.jsp page from the URL http://servername:50000/XMII/Login.jsp it is still showing Menu.jsp. But when I tried to login using the Menu.jsp page then it is redirected to my new Login.jsp page.
Please let me know how I will be able to change and deploy a new login page in MII 12.1.8 and with NetWeaver CE 7.1 EHP1 SP5.

MDM JAVA API SCA file for MDM 7.1 SP04

I need to download MDM JAVA API SCA file for MDM 7.1 SP04. When I added to the download basket through service marketplace it is looking for the approval process, just for the API file. I was able to get the other files though like webdynpro framework, change tracker. We haven't setup the Solution Manager yet. It might take a while. Meanwhile is there any other way to get the SCA file.
Thanks

Opened message with SAP and they have approved the download basket. Now able to download the sca file.

Could someone please recommend the best program to convert AVI and MPEG files for use (and exporting) into IMovie 11?

Hi - I understand I need to convert AVI and MPEG files for use within IMovie 11. I have one particular file that has a watermark stating "Created with Flip4Mac WMV Demo". Can someone please recommend the best program for a novice? Thanks!

Hi Susan,
It is no simpler converting vobs to mp4 than mpg (mpeg2).
There is *always* a loss of quality converting video from one lossy-compressed format to another, e.g. mpeg2 to mp4.
So, if you want to not lose any quality, then converting vobs to mpeg2 (mpg) is the thing to do (since there will be no video/audio re-compression), assuming Lr5 will accept them (sorry, but I do not know). example commands:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mpg
Win: ffmbc -i myvideo.vob -sameq myvideo.mpg
If Lr5 won't accept them, then you can convert to mp4 with minimal quality loss using a command like:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mp4
Win: ffmbc -i myvideo.vob -sameq myvideo.mp4
You may need variations of these commands depending on encoding of vob.
Note: -i means -input-file; -sameq means -same-quality, as much as possible.
ffm... is smart enough to avoid re-encoding, if possible, when -sameq is used, and makes reasonable choices for audio/video codecs based on extension of output file.
Of course, you'll need to download/install ffm... program if not already on your machine, and execute commands in a terminal or command window.
Do keep us posted please .
Cheers,
Rob

Exact SCA files for CRM ISA.

Hi Experts,
we are implementing CRM ISA scenario to our client. please give the details regarding required SCA files for customization.
Highly appreciated for valuable answers
Thanks in advance
Thanks,
Sree.

Hi Sree,
SCA files required for CRM E-Commerce implementation is
1)CUSTCRMPRJ.sca
2)SHRWEB.sca
3)SHRJAV.sca
4)SHRAPP.sca
hope this definetly helps you...
Regrads,
Anil.

Virtualbox - install build and header files for your current kernel

I have initially installed virtualbox before upgrading the Arch
Also took backup of the kernle before upgrading since kernel26 2.6.30 is having problem with virtualbox
After upgrading I have configure the grub to use the previous kernel i.e 2.6.28
Later installed xorg and want to install the video drivers from VBox additions
but running
sh VBoxLinuxAdditions_x86.run
i get the following
install build and header files for your current kernel
The current kernel version is 2.6.28 Arch
What are the build and header files I have to install or search with pacman
And since i have upgraded the system will I able to look up the header and build files needed for kernel 2.6.28

dmartins - he's talking about his kernel's headers, not the kernel-headers package - they are two very differnet things.
sant527 - when you backed up the 2.6.28 kernel, did you remember the files in /usr/src/linux-2.6.28-ARCH/ ? They're what VBox is looking for.

PDK 6.0 Software Component and SCA File Not Found

We are caught in a scenario where we don't find the PDK 6.0 Software Component in the SLD and we are not sure how to get this in the SLD. In the current SLD(SP16) it shows PDK 5.0 Software Component. Also kidnly let us know how to get the SCA file in order to be able to Check-In in the CMS against the PDK 6.0 Software Component.

pjmorce wrote:
I have a little web service that works fine when i deploy it on a tomcat 6.0 server using eclipse.
It is used to transform a XML file (that contains a reference to a file img/logo.gif) into a PDF file. The PDF file is generated with that logo.
The img/logo.gif file is into a JAR file used the WS.
Remove the img/logo.gif from your JAR and deploy the web service again on tomcat 6.0 with eclipse.
You will probably see that the service works fine because it never loaded your GIF from the JAR. It is more likely the reference out of the XML is interpreted as path on the file system.

SAP NetWeaver 7.01 Java installation on MSCS and Log shipping for DR

Hi Experts,
Can anyone please explain if below is possible :
- We have installed Netweaver 7.01 Java application server on Microsoft clustering which is working perfectly ok.
-Now we are looking at building a DR solution for the above installation using SQL Server 2008 Log-shipping. The DR site has the same MSCS configuration as the primary site.
-If we log-ship the production database and create a secondary database in "standby" or "norecovery" mode, how do we install a Passive SAP Central instance in case we want to failover from the primary to secondar ?
- We know that we have the primary database log-shipped to the secondary site and in the event of failure we can switch the roles and make secondary as primary and then perform the system copy steps on the MSCS. the drawback here is that it will take a long time to bring the system online if we perform the system copy. Our RTO is one hour only so this is not acceptable.
Question : Is there anyway we can install the Central Services and Applicaiton servers beforehand on the secondary site on the secondary log-shipped database so that in the event of failure all we do is bring the secondary database primary and then start the SAP on the secondary site ?
If yes then can anyone point me the any SAP note or documentation that has the details of how to do this.
I have already looked at 1101017, 965908 but its not clear how we can perform the installation on the JAVA stack only.
We want to implement similar to what is shows in the below diagram :
http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm
Appreciate if someone can assist in resolving the above query.
Thank you.
RA

Thanks Markus for your reply.
I did looked at the HA web page from SAP and configured MSCS for HA but there's no information regarding DR setup. All it says is setup a log shiping which we already know but there's no procedure to setup SAP on the DR site(Passive SAP central instance)
My original question still stands :
- Is system copy the only option that we need to perform at the DR site in the event of failure ( Assumption is that we ieve make the secondary database as primary and also sync file system for JAVA using SAN replication technologies)
- We have to achieve an RTO of 1 hour which is not possible in this case as performing system copy using MSCS HA option will take few hours to setup and test.
-The link "http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm" shows that we can have SAP PAssive central instance. Whats the procedure of installing this Passive instance on the secondary site so in the event of failure all we do is make the secondary database primary and bring the SAP system online(installed already - no system copy performed) and also file system is already is sync.
Thank you.
RA

.sca file for deployment For EP 7.0 SP08

Hello Gurus,
We are running on EP 7.0 SP08
1. Could anyone please let me know, where I can find the file <u><b>essuslwegp</b></u> sca file. I need to deploy this for configuration of guided procedures.
2. If you have any better procedure to configure this, please forward to [email protected]
I am trying follow this help doc to configure Guided procedures
http://help.sap.com/saphelp_erp2005/helpdata/en/43/9f2d87c0a86756e10000000a11466f/frameset.htm
I was looking for essuslwegp in content administration -> webdynpro -> sap.com -> (could not find essuslwegp )
I looked in following path, but found the patches, could not able to make for
http://service.sap.com/swdc
Download -> Support Package and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Enterprise Portal -> CAF EU 7.00 -> #OS independent.
It would be great, if someone can share their thoughts on the location of essuslwegp file.
Any leads or answers are apreciated and points will be awarded.
Thanks
Durga

Hi!
The only thing I have about that:essuslwegp
is in the SAPESS03_0.sca file.
I hope this can help.
Sincerely,

SCA Files for E-Commerce

Hello,
I am trying to download the following SCA files from service marketplace for the E-Commerce application.
For each of the following files, there exists a "Support Package" and a "Latest Patch"
Eg: For the SCA SAP_SHRWEB, there is "SAP SHARED JAVA COMPONENTS 5.0 Support Package 08"
and also
"Latest patch for SAP SHARED JAVA COMPONENTS 5.0 SP 9"
(Ofcourse there are also earlier SP levels)
Which of these is the right file?
Thanks and Regards,
Reena

You want to get the latest patch. It has updates since the package release.
-RK

Unable to deploy SCA file for MII 12.1

Hi,
We are trying to install the SAP MII 12.1. But through JSPM we are unable to deploy the SCA file. When we ry to deploy we are getting an error "AS JAVA is Not Running". Before starting the deployment we chckd that AS JAVA was running, but when we satrt deployment within two minutes the AS JAVA is stopped.If anybody come across the sam issue please let me know about this.
We have NW 7.1 CE EHP1 SP03 for MII 12.1.
The Log of the deployment is as below. I am unable to copy the entire log file because it is too big,so copied the last lines of the log file.Plz check below the log:
Deploy Result Description: Deployment exception occurred during deploy online data. Reason :An error occurred while deploying the deployment item 'sap.com_xappsxmiijraapp'.; nested exception is:
     com.sap.engine.services.dc.gd.DeliveryException: [ERROR CODE DPL.DC.3298] An error occurred during deployment of sap.com_xappsxmiijraapp. Cannot deploy it.
[ deployerId=2 ]
Dec 1, 2009 4:26:14 PM   [Info ]:+++ Deployment finished with status 'Error' +++.[ deployerId=2 ][#10: 344.156 sec]
Dec 1, 2009 4:26:14 PM   [Path ]:+++++ End D E P L O Y action +++++[ deployerId=2 ]. Total time:[#9: 344.172 sec]
Dec 1, 2009 4:26:14 PM   [Debug ]:Incorrect client ID. The stub is not connected yet.
-Suresh

Hi,
We suceessfully got installed the MII 12.1.
The problem was with our NW installation. We have taken NW CE 7.1 EHP1 then it is worked.
-Suresh

Sequence of Installs of RTA and SCA files for GRC AC 5.3

Similar Messages

Maybe you are looking for