Sequence of Production Order confirmation

Dear All,
I am new to SAP.
Can anyone tell us the exact sequence of Production order execution along with Transation codes.
Here I am giving the procedure what exactly I know about this issue....
1. CO01 - Production order creation & release
2. MIGO - Goods issue against reservation
3. CO11N - Operation wise order confirmation
4. COOIS - Confirmations report
5. MIGO - Goods receipt against order
Current Scenario:
I have created Order and without issuing goods against it, I've confirmed the order.
I would like to know that weather we can do confirmation without issuing goods.
And also I am requesting you to correct my procedure if I am wrong. If anybody can suugest me the exact procedure to follow in future.
Regards,
Haneesh R

Hi Haneesh
Adding some more detail in to the Production order execution flow:
1. CO01 / CO40 / CO41 - Production order creation & release
2. MIGO / MB1A - Goods issue against reservation
3. CO11N / CO15 - Operation wise / order wise confirmation
4. MIGO / MB31 - Goods Receipt against Production order
5. COOIS - Confirmations report / Order information system
Regarding the GI and GR: In standard SAP, GI, confirmation, GR activities can be done independently. It may be possible in some scenario where all the above can happen independently that is why SAP has kept it open.
You can restrict it accroding to your customer need using "User Exits". For example you can restrict the confirmation if goods issue is not done.
Thanks & Regards
Bala

Similar Messages

Production Order Confirmation Default

Hi PP Guru,
I am a functional support and currently we have an existing issue or clarification on the defaults of Production Order Confirmation (CO11N). In the current default, Partial Confirmation is automatically ticked, what we wanted to happen is that the Final Confirmation and Clear Open Reservation be automatically ticked and should be the default whenever we access CO11N. My question is that is there any setting or configuration that we may need to change in order to fulfill the desired change?
I would greatly appreciate your feedback on this matter.
Thank you.
JMTafalla

Hello Gurus
I have tried to go on transaction OPk0 and entered confirmation profile as this is a required field, I left the Postprocessing box unmarked, Then choose CONFIRMATION/ORDER/SEQUENCE/OPERATION/WORKCENTER as the header, then go to the default tab- confirmation function-select final confirmation and enable Post Open reservations. Then after saving, when i cheked it on CO11, still the default is Partial Confirmation. Is there other ways on how we can set the Final Confirmation and Post Open Reservations to be the default of CO11?
Your response is very much appreciated. Thank you...

Serial Number. Production Order Confirmation. GR. UD. Sales Delivery

Hi Gurus,
Please help on this issue to get any user exits .....
As part of Serial number management, we have a certain issues on serial number confirmation, goods receipt from production order and quality inspection with UD.
Master data:
Finished product material master, Workscheduling view, Serial number profile maintained " ASRN"
Process flow:
1) Avalon Specific Serial numbers generation for finished goods through production order release status.
              (A11206000001)
                                    A - Avalon
                                    1   - PCB Unit 1
                                    12 - Year 2012
                                    06 - Week
                                    000001 - Running serial number for the week.
2) Production order confirmation through CO11n transaction.
3) Production order Goods receipt through MIGO transaction against order.
4) Quality Inspection with Usage Decision through QA32 transaction.
5) Goods Issue for Delivery.
SAP Product Error:
1) System does not track and control the operation wise confirmed serial numbers during order confirmation.
2) System does not track and control the finally confirmed serial numbers during order goods receipt.
3) System does not track and control the last goods receipt qty in Usage Decision.
4) For semi finished product, if we maintain serial number profile in workscheduling view, system is not showing goods issue material list in Co11n transaction for the finished goods.
5) Interfacing the serial number reading scanner with SAP, is not working without entering material number and serial number manually.
6) System does not tracking and controlling the last Usage Decision done serial number during Goods issue to Sale order Delivery.
Regards,
Santha

Hi Santha,
This is a bit vast, but I'll try to address at least some of the issues:
1- serial number in operation confirmation is not possible, for the reason that serailization is part of stock management, and as WIP in an order, this is not stock yet. Actually you cannot confirm the manufactured material either, and those 2 go together.
For tracking specificly WIP, there's something called WIP batches; you may look into it to see if you can use it.
2- during GR system will propose those SNs that you have defined for the order at release or creation.
3- ?
4- GI in CO11N is provided only for BACKFLUSHED material components. Serialized materials CANNOT be backflushed.
5- You can use a barcode reader to read the serial number (instead of keyboard entry) when cursor is on the right field in the respective screen.
6- ?

Change Work Center during production order confirmation

Dear All,
I must to modeling this situation:
I created an production order. In routing I used an work center A.
After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
Thank you for your answer!
Regards,
Marian

once a Order is released, the Process order detaisl for that order is frozen.
however if you want to do it, change the order status to CRTD after reversing the Movements done.
Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
if the change is long term.
or
Just manually add the new work center and do the processing. if the change is temporary.

URGENT: Prob with Production Order Confirmation

Hi Gurus,
I have a problem with Production Order Confirmation.
When I am confirming a Prod Order and if the components present are more than '999', then error is being thrown and Material Document Number is not being created.
I want to split the records into 500 slots and pass them at a time for the creation of the Production Order so that it doesnt throw me an error while creating a Material Document No.
While saving the Production Order confirmation order, it should split the records into 500 slots each and then create Material Document No for each slot.
Can anyone please help me out in this regard, how to solve this.
Thanks & Regards,
Harish Kalla

Hi Harish,
This problem is addressed in OSS Note : 36353
The Symptom reads like this
==========================================================================
When you post documents using the AC interface (from SD, MM or other applications), items appear in the FI document which are identical in all or in almost all fields.
This can also cause error message F5 727 ("Maximum number of items in FI reached"). The system issues this error if more than 999 items occur in an FI document.
===========================================================================
This Note is an elaborate one..
Hence, go through this and ask your FI Consultant to help you in this regard.
All the best..
Regards,
Siva

Production order confirmation in co11.

In co11 , I want to post balance qty while doing the production order confirmation. actually total qty issue is 10 but confirmed qty is 5 , here balance qty 5 shud be posted automatically while save the confirmation.

solved . developed the custom pgm.

Measuring point update by production order confirmation

Hi friends,
I created a prt as equipment and assigned it to the routing. I created a production order and when i confirm the same i am getting following error as:
Document MeasUnit has a different dimension to the characteristic unit
Message no. IR071
Diagnosis
The measurement unit on creation of the measurement document must have the same dimension as the measurement unit of the characteristic of the measuring point.
In this case, the measurement unit % does not suit the character unit EA of the measuring point 103.
System Response
Processing will not be continued.
Procedure
Use the possible entries help.
Please suggest the solution.

Hello Sir(s)
i have gone through entire post for the subject related to measuring point auto update from production order confirmation. I have tried the same but i dont know what i am missing.
if i put some value like 1 or 2 and appropriate UOM then only my measuring document is being updated with the same value not with the actual confirmed quantity.. i have already maintained standard formulla in prt view.
my basic requirement is to get actual value of produced quanity as counter update. means if 20 pieces have been produced and confirmed in co11n, then counter must bhe updated with the value of confirmed quantity.
please advice what value should i put as usage in routing master to get actuall counter update.
Will Highly appreciate your quick reply.
Snapshots
Regards.
Mohammad.

Restricting Good Receipt Unless Production Order Confirmed

Hi
Experts,
I want to Restricting Good Receipt Unless Production Order Confirmed
I am doing following thing but the error is occured.
Use Tcode BS02 ( Customising USer status profile).
2. Select the order type which you want to configure (eg:PP000001) and choose "Details" button.
3. In the User status table do the following:
a. In the status no field type"1" , status field "Sta1", short text"GR not allowed", lowest no "1", Highest No "2". Mark a tick in the initial stats check box.
b.Next line, type status no field "2" ,status field "sta2", short text"Gr allowed", lowest no "2" , highest no "2".
4. Select the STA1 line and choose details. select the "create"button.select the "GR for prod order", mark "forbidden
radio button" and "set radio button".
5. Select the STA2 line and choose details. Selct the "create"button. select "confirm order", mark "permitted radio button" and "set radio button". Next choose "GR for prod order" , mark "permitted radio button".
6.Save.
Create a prod order and check whether the required scenario is working.
I have created user status profile as PP000001 GR
ERROR
First define allowed object types
Message no. BS218
Diagnosis
The object types for which a status profile may be used define which business transactions are included in business transaction control.
Procedure
First define for which object types this status profile can be used.
What is object type how to define?
Thanks & Regards
Pert

Hi,
Refer to the below thread which addresses the same need:
Re: GR not allowed :BS02
Revert if you face any issues.
Regards,
Vivek

Is possible to create a TO automatically after production order confirmation?

Hi all
I have just a question in order to know if we can configurate a procedure to a Production Order, so my question
is possible to create a TO automatically after production order confirmation in a standard enviroment?
Thanks in advance for all your comments

Hi Gurus,
Thank you for your help in this case.
Process:
The customer create a production order in CO01 and then they confirm the order in CO15, after confirmation TR is created ( we can see this in LB10 ) and negative stock is created ( we can see this in LS24 ).
Requirement:
They are asking to create the TO automatically after the production order confirmation. Negative stock is afecting the process.
Workaround:
They are creating the TO in background in LB10. ( negative is fixed )
Question:
Can we create the TO automatically after confirmation in standard configuration?
if no , how can we confirm this TO .using a JOB option?
TR created after confirmation
TR header
LS24 negative units.
Regards!!
Ronald

Price difference on cancellation of production order confirmation

Hi,
We are having a material which is maintained at price control "S". We have created a production order for the material. In due course of business, we did confirmation for say 100 pcs of the material. However, immediatly on confirmation, we realized that we do not need to do the confirmation & hence we did the cancellation of the production order confirmation using CO13.
On doing the production order confirmation cancellation, we observed that the system has posted some amount to "price difference account"
We also observed that once in a while this kind of entries do get posted.
It is requested to please let us know in why system is behaving this way?
We have checked SAP Note no 216080 "Price difference when reversing GI for S-Priced material" & SAP Note no 215980 'Price difference during GR for the production order". However we are not convinced that these could be the reason for the price difference.
Thanking you in anticipation
Regards
Santosh Kumar Agarwal

Hi,
Yes, you are correct in the understanding that the system creates quants in 914 when the production order confirmation is cancelled. But, it does not generate any TR or TO in the background to post the stock back into the original storage type.
Can we not use the put away strategies so that the system determines where to place the material? My query is that despite all the configurations for automatic TO creation and confirmation for movement type 262, it does not generate a TO (or TR) in the background when a production order confirmation is cancelled using CO13.
However, if I manually post a material using MB1A for 261 movement type and reverse it using 262, it generates a TO and confirms it as per the setting in configuration.
The same thing does not work when we run it through PP (CO11N and then CO13).
Any suggestions on how to approach this and where to check for missing configurations?
Thanks and Regards,
Gaurishankar

Production order confirmation problems

My production facility has been having problems for years centered around the production order confirmation process. My colleagues and I are considering submitting an OSS note to SAP, but figured that we should present our problems in these forums before making that next step.
Here are some individual issues which I believe may be related. All of these issues occur off and on at random. They will typically occur when more users are working in the SAP system or when SAP is running slow.
- When an order is confirmed and a label is printed, sometimes the quantity on the label will be incorrect. Sometimes no label will print out at all. When the order is unconfirmed and then reconfirmed again, a label prints out with the correct quantity.
- When a confirmation is unconfirmed, the unconfirmation will not backflush the associated materials correctly. Sometimes this error will appear in CO1P for us to re-confirm, but not always.
- Sometimes confirmations will only backflush certain materials and not ALL the components within the production order. When the confirmation is unconfirmed and then reconfirmed again, the confirmation will backflush all materials correctly.
These problems occur at random intervals and never present the user with an error. Close to 100% of the time all the confirmation issues will be corrected by simply u201Cre-doingu201D the confirmation as we did the first time (no changes in the process). Only the second time around there will not be any issues. This leads me to believe there is some internal issue with SAP, perhaps involving which tables CO11N pulls from when a confirmation is made.
Any and all help is appreciated. We currently run the AFS version of SAP. This is my last stop before submitting an OSS note.

Hi,
I have not worked on AFS, so consider the below as a pointer which might help:
When you post confirmations & notice that the components are not being backflushed, check in COGI it could be that there are some incorrect goods movement. You will be required to clear these entries from COGI.
I suspect that you notice these because, the confirmations are being posted even before the stock for the same has been received & hence the issue with labels as well.
Do a check on the above, if it resolves the issue, then i would suggest re-design the process to ensure you do not have COGI or COFC entries.
Also do a search in OSS for AFS specific notes on confirmation.
Hope it helps.
Regards,
Vivek

Error during Production Order Confirmation

I get a real wierd error during production Order confirmation. The error message is
"Additional items are not allowed
Message no. ZOAL010"
Can anyone throw some light on this?
Regards
Raj

it is not std SAP message.
you can check the user exit for confirmation.
check in transaction code CMOD/SMOD for CONF*

Total Production Order Confirmation..Urgent

Hi
Can anyone tell me where to find the total production order confirmation by Second ( or minutes or hours ) for any month i.e. say for example March 2007
Please suggest......Its urgent
Rgds

Hi Vichy,
Try this, COOIS,
List =confirmation
Profile =std profile
selection -> sys status =CNF
Resrict ther report with Dates with Order header level.
To get activity values use change layout option inside the report.
Select the field like unit/activity. from change lay out menu.
Pradeep
Edited by: Pradeep Kumar on Apr 18, 2008 9:19 AM

Error during Production Order Confirmation mfbf ( backflush)

in my company in sap when i using mfbf for production Order confirmation of tractor then during backflush using mfbf tcode order confirm but in my store dept no metiral cunsume so please regards this problem
with warm regards
pritpal singh

Dear Pritpal,
sorry dear,today i cant check my inbox immediately. Anyway my mail id is [email protected]
have checked as per my previous post.
regards
pradeep

Production Order Confirm/Label Printing problems

I am currently having issues printing out labels for production orders. Whenever I confirm an order, our printer will print out a different quantity or no label at all.
Here is a brief history of production order confirmations today....
Entered                Printed
80                           40 (2 labels of 20)
20                           No Print
20                           No Print
40                           No Print
ALL confirmations were accepted by SAP
SAP WILL often drag during a normal confirmation when correct labels are printed
SAP will NOT drag when a confirmation is entered and no labels are printed
Yesterday I had a confirmation for 10 print out a label for 19. All of the quantities in SAP are correct, it's only the printer that is creating labels for different quantities. If all the lot sizes in SAP are correct, what do you think the issue might be?

Hi,
Based on what i understand of your query, would suggest to work with your technical person to have a look at the print program. The delay you notice or the incorrect data being printed might have to do with the program.
Regards,
Vivek

Sequence of Production Order confirmation

Similar Messages

Maybe you are looking for