Sequence of requests when acitvating requests in DSO
Dear all,
I did a data load into a DSO and wanted to activate the request.
I got this error message:
Request REQU_D34HNJC8RC1HEPTA1E2E1DEKI (244.929) for DataSource 2LIS_11_VAITM from source system GEN has the status green and a lesser SID (and is therefore older) than the request that you currently want to update into the DataStore object.
This is not possible because the sequence of requests has to be followed.
Delta- and init requests have to be updated to the DataStore object in the request sequence.
The problem is that I cannot find the named request, REQU_D34HNJC8RC1HEPTA1E2E1DEKI, to activate it. It is not listed as a request in the DSO neither in the PSA.
Could someone advise me on how to proceed?
Thank you very much in advance
-Martina-
Hi,
Take this request REQU_D34HNJC8RC1HEPTA1E2E1DEKI in RSRQ and go its monitor log.
Check whether it is updated till PSA or not, If it is updated till PSA then push it from the PSA.
If not check wats the status of this request and let us know.
Cheers,
Neelesh Jain.
Similar Messages
-
Error coming while activating the data request at DSO level
Hi to all,
please can anybody tell me the solution for that.
While activation the data request at DSO level , i am getting error .
Value 'R2S-11.60UML ' (hex. '5200320053002D00310031002E003600300055004D004C00A0') of char
Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
Process 000001 returned with errors
this error is coming under SID Generation .
I shall be thnakfull to you for this.
Regards
Pavneet RanaHi Rana,
Activation failed because of the special characters in the Omaterial
Delete the request in target
edit it in the specific record in PSA and load it back
In your case i think its a space problem u can see a space after L
delete the space for the record and load it again
Regards,
MADhu -
Recover deleted requests from DSO
Hello BI Experts,
We have been deleted requests from standard DSO accidentally. The data has been deleleted for 3yrs and we have been trying to recover from Reconstruction tab but could not found anything there.
Can any body tell me how to recover recover deleted requests from DSO? I would really appreciate your great help.
Thanks in advance,
Regards,
VenkatHI BI Experts,
When we personalize Query language to another language in the SAP Portal, the variable selection fields are not displaying with description and they are displaying in the technical name.
Example: Opened BI report from the SAP Portal and selected Personalized settings, from there selected Portal language as French. when I selected French language, the vaiable selection screen field names started appearing with technical field name in the French language but it should display the field description not the technical name.
I hope you understand my question.
End user does not understand the technical names when they have selected personal language. Can any body tell me how can the fields displays with description from the variable selection screen. I would really apprecite your help.
Thanks,
Venkat -
While activating a request in DSO getting error code 10
While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal PardeshiCheck the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra. -
How to delete a single request from DSO in BI 7.0
Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
PrathapIN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk -
Need help in deleting the requests from DSO
Hi All,
I want to delete the data load requests present in the dso, I cant do that from the manage tab as it is throwing error because of some dump been loaded into it.
Please tell me the tables names which stores these data load requests of the dso's so that I can delete those requests in the backend.
If is there any way to delete these requests or complete data, please let me know. I cant do these operations from the mange tab/delet data tab of dso as it is throwing the error.
Thanks,
vinay.Hi,
You can delete the Requests form DSO by useing RSICCONT.
Follow bellow steps:
1. Goto SE16.
2. Give the RSICCONT and Click on Technical Contents.
3. Give the DSO name--> Click on Execuit
it will dispaly the number of requests which it exists.
4. Select your request>Select 'Table Entry' Menu> Select 'Delete'
Regards,
Suman. -
Error while activating request in DSO
COPA Data is successfully uploaded to DSO from PSA.
DSO -> Manage -> Activate -> Start -> Displaying error msg :
Request 122,317 is currently being read from data target ZCOPA_O1
Message no. RSENQ011
Have deleted the request from DSO and again loaded, still error persists. Please help.
Regardseven if you get the error message it will show you the Data flow.
Just check which cube or DSO is reading data from this particular DSO for which activation is failing.
May be that load is still running or some entries are still there in control tables...this is preventing from activation...
PS: In my last message I wanted to know what is this ZCOPA_O1 ?
Is this your DSO or Open Hub Destination?
Edited by: Anindya Bose on Feb 8, 2012 1:27 PM -
Error while deleting request from DSO: S:RSODSO_ROLLBACK:259
Hi,
While deleting request from DSO, we face following errors:
S:RSODSO_ROLLBACK:259 129 transaction rolled back by an internal error: fail
Message no. RSODSO_ROLLBACK259
Job is getting completed with message:
Deletion of request REQU_3HHPSMIMMVRF87FI0EGC5CS4B from data target ZPR_ODS failed
Deletion of request REQU_3T80EDOBQR7CWSC8QKKHAMH5N from data target ZPR_ODS failed
Deletion of request REQU_8JIMF8SRDOG0T3QG6AGRA63Q3 from data target ZPR_ODS failed
Deletion of request REQU_CMCCHOZGOF3KXNMVXB94ZHMCB from data target ZPR_ODS failed
Deletion of request REQU_BPCAB8LY6V4CMC3XQ12AWN7MJ from data target ZPR_ODS failed
<Message short text RSODSO_ROLLBACK 259 does not exist>
Parallel processes (for Rollback); 000003
Timeout for parallel process (for Rollback): 000600
Package size (for Rollback): Dependent on Activation
Task handling (for Rollback): Backgr Process
Server group (for Rollback): No Server Group Configured
Job finished
FYI:
Kindly help us to resolve the error.
Regards,
Antony Jerald.Hi Dinesh,
Thanks for your reply.
We have Netweaver 7.30 with BW on hana on SP 9.
First 3 SAP notes doesn't meets the need.
Shall I use 1007717 note?
Which says:
use transaction SE16 to delete all entries for this request and for this Operational Data Store (ODS) object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ tables. Then set the 'from-date' in the administration of the data target to a value older than the oldest request loaded in this ODS object. Choose 'Refresh'. This corrects the administration.
Will it resolves the problem?
Kindly suggest.
Regards,
Antony Jerald. -
Getting error during activation of data request in DSO.
Hello All
I am sending data in DSO by running DTP. evrythg goes in green . But as i try to activate the data request in DSO it is giving me error. Kindly tell the how to solve this.in log error meassage is like following .
Error while inserting data records for data package
Analysis of package terminated due to too many duplicates being found
Process 000000 returned with errors
Incorrect data records (duplicates) found
Data records are in the data package more than once.
regardsSaurabh
Sorry that option would only be available for Master Data Attrib /text.
Please check if the in DSO Settings ...Unique Data Records -
> Is this checked? if yes , you need to change it from DEV.
For a temporary solution, you need to find out which records are creating duplicate entries. If you can load them separately via some restriction in DTP , it would get loaded and then activate one request each time.
Whole objective is not have same Key combination more than once in a data package.
Try put a restriction on Update MOde i.e filter on Update Mode ( one by one X, blank, A, D, N etc) and see if you can load them.
Regards
Anindya -
Problem in deleting a request from Dso
Hi Experts,
I have loaded the request into DSO, after activation, i have changed the QM status to red and try to delete it from the manage screen. But it is not getting deleted from DSO.
I have used following tables :
RSREQDONE
RSICCONNT
RSODSACTREQ
For deletion purpose, but i'm not provided with authorization ..
And also i have used FM to delete the request from DSO , but it also failed ..
Can you please help me out in this regard..
Thanks
PTHi,
Please check if your DSO is locked by any other process. You can check the lock status from SM12. If your DSO is locked by some other process, you will have to wait till that process finishes or kill the process if it is not required so that your DSO will be unlocked. Once your DSO is unlocked you can retry activation. If this doesn't work, please check if you have the authorization to delete data. after trying to delete the DSO you can run the transaction SU53 to see if there is any authorization failure.
Hope this helps you.
Thanks,
Nithin Reddy. -
Delete overlapping requests from DSO
Hi Everyone!
Is there any function to delete overlapping requests from a DSO in process chain?
For InfoCube there is one, but how about dso?
I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
load requests in dso.
Does anyone have any idea?
Thanks in advance.
EduardoHi..
How could you do that since DSO has the overwrite property? For example you are loading from DSO1 or DS to DSO2.
If u ran a load that goes into DSO2. If u ran same load again it goes into DSO 2 and overwrites the previous request. for that u can verify with display data.
Is ur DSO additing the records????
Delete Overlapping Requests Only for Info cubes.
I request you to post the exact issue so that we can assist you better.
Regards....KP -
Deleting overlapping request from DSO
Hi there!
Is there any function to delete overlapping requests from a DSO in process chain?
For InfoCube there is a step, but how about dso?
I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
load requests in dso.Hi Shanthi,
I tried using info package but still req havnt delete from info cube.
It works for DTP as i can see many DTPs in list but not mine thats the issue.
Thanks from your responce. Hoping for any new suggestion.
i cant manually delete req from production as process chain runs at mid night. -
BW error: "invalid call sequence for interface when recording changes"
I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW. Any ideas on how to resolve this error?
Thanks.I already tried that. This is what's happening.. When I get this error, if I try again it will activate and gets collected into a transport. I moved this transport to our QA system. As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource xxxxx must be activated. Before the excecution of the infopackage, the datasource is in "Active version executable". After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable". I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
Any help?
Thanks. -
How to preserve data when converting a Standard DSO into a Write Optimized
Hi,
I'm looking for proven strategies for preserving data when converting a standard DSO into a write optimized DSO. The data has to be dropped before the new DSO is transported into the environment.
1. The DSO is currently in synch with a cube,
2. The PSA does not have all the data which is in the DSO.
3. Data volume is incredibly high for a full reload from ECC, so we'd like to avoid that option.
Appreciate any help!Hi Gregg,
have you considered just deleting the data? I know that sounds simple, but it might be a valid solution.
If the DSO is just receiving new data (e.g. FI documents), you can continue to deliver a logically correct delta to the cube.
Should that not be possible and you really want all data that you currently have in your DSO1 in the write optimized future of it, then how about this:
- Create a new DSO2 same structure as DSO1
- Load all data into that
- Delete all data from your DSO1 and import the transport to make it write optimized
- Load all data back into you now write optimized DSO1 from DSO2
The problem you have then, is that all data that you have already loaded into your cube is due to be delivered as a delta from DSO1 again.
Depending on your transformation / update rules that might or might not be a problem.
Best,
Ralf -
RoboHelp HTML v9 - Browse Sequence not appearing when generated
RoboHelp HTML v9
New project - eg not converted from previous version
Added a browse sequence as per the help documentation - I've followed the help documentation however when I get to view result of the generated WebHelp - the browse sequence is not present on the topic pages that were added to the browse sequence.
I read previous forum postings for RH8 - where reinstalling or repairing the software seemed to assist - however when I access through control panel - add/remove programs the only option in to Remove RH9.
So I thought I'd ask the question here before uninstalling.
There was also mention of a dll file that needs to be registered on the viewers pc before the browse sequence would appear and if this is the case due to the possible audience for the publish I would not be able to control that.
Any help is appriciated, thanks.Hi
Thanks - I guess I was looking for the page icons that visualized the
sequence for the viewer.
That being said - the navigation arrows are present in my published file
however seem to hold no functionality - while on a topic that is within
the browse sequence clicking the arrows does not move through the
sequence.
I was initially looking for onscreen navigation for a series of topics -
I though browse sequence would do the trick but I think I will move to
another method.
Karen Voycey, BSc
Learning Solutions Specialist | Human Resources
10 Wellington St. E. | Toronto, ON | M5E 1L5
t. 416 366 7600 x 2451|1 800 569 1163 | cell +416 568 2551
[email protected]
Proud national insurance sponsor of the AIR MILES® Reward Program. For
more information go to www.rsagroup.ca.
RSA is a registered trade name of Royal & Sun Alliance Insurance Company
of Canada.
From: Captiv8r <[email protected]>
To: Karen Voycey <[email protected]>
Date: 13/07/2011 04:52 PM
Subject: RoboHelp HTML v9 - Browse Sequence not appearing
when generated
Hi there
Your mention of: "the browse sequence is not present on the topic pages
that were added to the browse sequence" seems to imply that you are
expecting to see the sequence directly on those pages. But that usually
won't happen.
Perhaps it will help to start by viewing the link below:
http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/012006.htm
Then come back with any questions you may have.
Cheers... Rick
http://www.robowizard.com/pc.gif
Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com
Maybe you are looking for
-
Hi, I have 3 ODS for sales,delivery,billing. I am trying to create report on these by using InfoSet. i am getting only matched records from all ODS, even if i used leftouter join( i tried with inner join also). Ex : sales item delivery item billing i
-
HI All I want to display Entry Date while displaying line items. How can i do that. Thanks Gautam Anand
-
Cisco EPC3925 EuroDocsis Wifi turned off but light stays ON w/ recently updated firmware
hi there i have a Cisco EPC3925 EuroDocsis 3.0 2-PORT Voice Gateway and i just noticed that today they pushed an OTA firmware upgrade via ISP "Melita" here in Malta. It looks like now when i disable the wifi, the green led for wifi still stays on, di
-
External HDD or Network Server
I'm posting this here because it does fit into the category, and I really didn't know where else I should put it. I currently have two LaCie 500GB external HDDs that I use for Time Machine and dumping digital video. I upgraded the HDD in my MacBook P
-
HT203167 how do i transfer Itune songs to a new computer
or take it off my ipod to my computer (my new computer is a shared computer with another Itunes account)