Sequence of the import.

Hi all,
i am working with ESS. i have the following components to be imported into track.
sap.com_EP_BUILDT
sap.com_SAP-JEE
sap.com_SAP_BUILDT
sap.com_SAP_ESS
sap.com_SAP_JTECHS
sap.com_SAPPCUI_GP
is there any sequence of importing these Components..
Regards,
Srikanth Anthargam.

Hi Srikanth,
there is no build for SAP_BUILDT, _JTECHS or -JEE as they only contain archives and no sources.
On reimport CBS will recognize changes to those archives and rebuild all DCs that depend on them. Since SAP_BUILDT contains the build logic for all DCs any change there usually leads to a full rebuild of all source DCs in the track.
Thus if you have a new or empty buildspace it might save some time to import all "normal" archives first and import the *BUILDT scas in a separate step. This last step will actually trigger the build. If there are already archives in the build space the order doesn't really matter as each import may trigger rebuilds. If you import SCAs individually then some components will be built multiple times, wasting time.
Regards,
Marc

Similar Messages

Media Encoder CC won't import a JPEG sequence to the queue

I am running Media Encoder CC 7.2.2.29 (64-bit) on OSX 10.9.4.
I have a JPEG sequence GoPro timelapse image sequence that I want to encode into a video clip. All files have a .jpg extension. They are 4000x3000 and have an RGB color space. The Color profile is SRGB IEC61966-21. All images are 3.9MB.
According to the ME help I should do the following.
To add an image sequence, choose File > Add Source. In the Open dialog box, choose the first file of the image sequence. Enable the Sequence Import checkbox for your file type, and then click the Open button.
I follow the instructions and select the first image in the sequence. The "JPEG File Sequence" checkbox is active and I check it and click the Open button. The dialog disappears and nothing happens. There are no warnings.
How does one get JPEG sequences to import to the queue?
Please advise.
-Travis

Yes, import into premiere work fine. The nice part about using AME directly is you don't have to have to create a project or use an old one every time you want to crunch a timelapse. Also, AME has this nice feature where it will autoname the output file IMG[FirstStill]-[LastStill] (ie IMG[GP001234-GP001297]). This was helpful because GoPros change the first number in the sequence every time you stop and start time lapse.

Updating the sequence number on import?

OK, this is probably and oldie, and obvious to the informed observer, but I looked out on the web and in here, and apparently I"m not asking the right question 'cause I didn't find the answer:
When doing an import into Lightroom, I can rename the files. As part of the rename I'm incorporating
a sequence number. I can set the Start Number, BUT once I"ve imported the files, how do I get the
Starst Number AUTOMATICALLY updated so on the next import it starts at the new value?
AND, have it retained betwen sessions? I don't want to have to run around finding the Start Number the
next time I start Lightroom...

Ok, I think I have found out what is going on and have answered my own question.
The 'Import #' and 'Image #' use the entries from catalog settings ONLY if you are importing pictures.
It does NOT work if you are using 'File / Rename Photo'.
In that case, they always seem to start at 1.
It doesn't sound like the logical way to function, but at least I think I have a handle on it now.
Gary

After Effects CS5.5 will not open a Dynamically Linked Premiere Pro sequence in the comp. window

Hi all,
I'm trying to export a Premiere Pro sequence which is in 2K and the footage has been shot as RED 5K. Adobe Media Encoder will simply not work as I am having the quite widely discussed issue where it will just 'hang' at certain points and not complete the export.
The most popular solution to this problem is to export via the Render Queue in After Effects instead. However, therein lies the problem.
I go onto After Effects. Choose File -> Dynamic Link -> Import Premiere Pro Sequence.
The box pops up, I choose the Premiere Pro Project File then select the sequence I want to export. It then appears in the After Effects project panel window like so:
However - when I try and drag this to a new composition window, one of two things have happened. Either A) nothing happens (literally, NOTHING changes) or B) as the following example shows, it seems to add it to a new composition, but the video is entirely black. I have tried rendering it and it just produces a black video.
The other thing people seem to suggest is to just import the entire Premiere Pro sequence into After Effects. I've tried this, but any titles I have added in PP force the video to fade out then back in, in the place where the title should be?? So I can't export the video this way either.
My system is as follows:
Thanks massively in advance for any help that is provided!

This is months old but I'm now having the same problem with AE and Premiere CS6 after updating last night: Dynamic linked sequence shows up in the project window in AE and even plays video if previewed, but will not drag or alt-drag into any comps, including a new comp (makes a new comp with matching settings, but empty).
Furthermore, I do actually have an earlier version of the same sequence placed in one of my AE comps, which I think was done using the same steps just prior to updating the apps last night. Did this break?
I'm a little concerned since the biggest reason I'm trying to use premiere is to eliminate the exports when adding graphics in AE.

Why is my QuickTime Pro exporting image sequences in the wrong order?

I am making timelapse films and using QuickTime Pro to export the images as a movie file. I have all the images in a folder named numericaly. I go file>import image sequence click on the first image and import. The images are in the correct order in the source folder I have also checked the resource files under show movie properties and they are in the correct order there. I then export as a QuickTime movie file at 1080p H.264 the film is stepping and the frames are out of sequence in the eported movie file. Why is this? Has anyone come across this before?

Is there anything else I could try.
Not sure. I would likely test an x264 export of the image sequence from QT 7 Pro or MPEG Streamclip (or from HandBrake if your system is not configured with the x264 codec) and see if the result was any better. This is not a problem I run into very often and, even then, the files were sent to me with no real indication of how they were originally encoded.
Or do you know how I can analise the exported file?
Not really... but it would be nice to have a tool which indicated the current frame type and listed pointers to frames/stacks of frames used for rendering reference.

Can't see some Business Rules after running the Import via LCM

I am trying to migrate our Business Rules down from Prod to Dev to get them back in sync. Here is the steps I have run:
Export ALL Business Rules and Sequences from Prod via LCM
I confirmed the export directory contains an .xml file for EACH Rule.
copied the export directory down to Dev Shared Services server
Turned on DEBUG for Shared Services
Deleted ALL Business Rules and Sequences from Dev EAS BR repository
I confirmed that ALL BUsiness Rules are listed and checked in LCM Import.
run the Import from Dev Shared Services via LCM
I get a Completed successfully message. No Errors.
I Refresh Rules in Dev EAS and I only see 25% of the Business Rules listed.
I have tried to Stop/Restart the EAS services and still nothing.
I confirmed that the ID I am using to Export / Import has access on each Business Rule either directly or via a Group that has access.
Any thoughts??
Thanks in advance for any assistance on this!
Robert

Thanks John!
I was really trying to get it done via LCM since I have all other migrations being done there. but I ended up taking your advice and doing it the old fashion way via EAS export.
To answer your questions:
We are on 11.1.1.3
I did not see any problems in the Services logs for EAS. Nothing that stood out.
We are migratiing 66 Rules and 15 Sequences.
We are using Weblogic instead of Tomcat.
Even though I have a workaround for the issue I am still interested in understanding why some of them did not import via LCM. You mentioned that you might consider adjusting some config settings. What settings would you recommend looking at?
Thanks again John!
Robert
Edited by: user627522 on Nov 16, 2010 6:27 PM

Unable to see the root node in the import manager

Hi All,
I want to load an xml file based on the schema .
I am unable to see the node <Record> containing the records in the import manager.
What I am seeing now in import manager Source Hierarchy is
> None
>ns1:MT_MDM_003_Shipping
What I am supposed to see
> None
>ns1:MT_MDM_003_Shipping
>Record
Could anyone let me know if the structure of xml or schema is wrong below.
XML File:
<?xml version="1.0" encoding="utf-8"?>
<ns1:MT_MDM_003_Shipping xmlns:ns1="urn:Test-com:Customer_Master" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:Test-com:Customer_Master J:\Data\MDM\CUSTOM1\IMPORT2\MT_MDM_003_Shipping.xsd">
 <Record>
 <Sales_Organization>1001</Sales_Organization>
 <Distribution_Channel>00</Distribution_Channel>
 <Division>00</Division>
 <Customer_Nr>00114</Customer_Nr>
 <Order_Combination>Y</Order_Combination>
 <Complete_delivery_reqd_by_law/>
 <Max_partial_deliveries/>
 <Delivery_Priority/>
 <Shipping_Conditions/>
 <Delivering_Plant/>
 <Partial_delivery_per_item/>
 </Record>
 </ns1:MT_MDM_003_Shipping>
XSD File:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema targetNamespace="urn:Test-com:Customer_Master" xmlns="urn:Test-com:Customer_Master" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="MT_MDM_003_Shipping" type="DT_MDM_003_Shipping" />
<xsd:complexType name="DT_MDM_003_Shipping">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">3c427550330e11dda6b400112539c3ab</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="Record" minOccurs="0" maxOccurs="unbounded" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd01c4f11dd8b8b02004c4f4f50</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Sales_Organization" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd11c4f11ddb25802004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Distribution_Channel" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd21c4f11dd800802004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Division" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd31c4f11dd99b802004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Customer_Nr" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd41c4f11ddb93902004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Order_Combination" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd51c4f11dd871702004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Complete_delivery_reqd_by_law" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd61c4f11dda64f02004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Max_partial_deliveries" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd71c4f11dd832102004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Delivery_Priority" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd81c4f11dda0e902004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Shipping_Conditions" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfd91c4f11ddb21602004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Delivering_Plant" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfda1c4f11dd9e5402004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Partial_delivery_per_item" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">414ccfdb1c4f11ddaf1202004c4f4f50</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

Hi Aravind,
Try importing two records i.e. your XML file should consists of two record nodes
<?xml version="1.0" encoding="utf-8"?>
<ns1:MT_MDM_003_Shipping xmlns:ns1="urn:Test-com:Customer_Master" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:Test-com:Customer_Master J:\Data\MDM\CUSTOM1\IMPORT2\MT_MDM_003_Shipping.xsd">
<Record>
<Sales_Organization>1001</Sales_Organization>
<Distribution_Channel>00</Distribution_Channel>
<Division>00</Division>
<Customer_Nr>00114</Customer_Nr>
<Order_Combination>Y</Order_Combination>
<Complete_delivery_reqd_by_law/>
<Max_partial_deliveries/>
<Delivery_Priority/>
<Shipping_Conditions/>
<Delivering_Plant/>
<Partial_delivery_per_item/>
</Record>
<Record>
<Sales_Organization>1001</Sales_Organization>
<Distribution_Channel>00</Distribution_Channel>
<Division>00</Division>
<Customer_Nr>00114</Customer_Nr>
<Order_Combination>Y</Order_Combination>
<Complete_delivery_reqd_by_law/>
<Max_partial_deliveries/>
<Delivery_Priority/>
<Shipping_Conditions/>
<Delivering_Plant/>
<Partial_delivery_per_item/>
</Record>
</ns1:MT_MDM_003_Shipping>
Please change the data of second record accordingly. I also faced the same problem and some how manage to get this solution. Lets see whether it is working in your case.
Regards,
Jitesh Talreja

How to apply Property Loader to all sequences in the Sequence File?

HI,
I'm following the help instructions for the Property Loader and it states....
Use Current Sequence File—Selects the file where the step is located.
Sequence—Specifies the name of the sequence into which to import variables and properties. The specified sequence must exist in the specified sequence file. Select the <ALL SEQUENCES> tag from the drop-down list to instruct TestStand to import variables and properties for all of the sequences in the specified sequence file. You must specify a valid sequence name for the step to work properly.
In my specific sequence file I added the Callbacks: SequenceFileLoad, SequenceFileUnload, PreUUT. In addition to that, my MainSequence is calling 2 subsequences.
I put the propertyLoader step (setting few values of the SequenceFileGlobals) in the setup section of the SequenceFileLoad, checked the 'Use Current Sequence File' and selected ALL SEQUENCES tag in the 'Sequence' option. I verified that it does what I wanted. Then, is it entered the PreUUT subsequnce, the values returned to the "original" values.
Is that a bug?
If not, how do I use the PropertyLoader in a sequenceFile that include several subsequences as well as Callback sequences.
Thanks
Rafi

Ooops, sorry about that...
I forgot to mention....it is TS 3.5.
As per your questions-- yes they all in the same sequence file.
 mySeqFile.seq
 SequenceFileLoad
 SdequnceFileUnload
 PreUUT
 Seq1
 Seq2
AS I said....I put the property loader in the setup of the SequenceFileLoad, I see that it works properly in that subsequence. Then, after the SuequenceFileLoad is finished, I do Ctl+F5 for Test UUT's. I put a breakpoint in the first step of the preUUT subsequence and check the context. I notice that the variables in the FileGlobals to whom the property loader writes, have been changed back to the original values.
I'll try to create a simple program to duplicate it but it may take me time as this test station is very busy.
Thanks
Rafi

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Image sequence of jpegs import into Premiere Pro CC 2014 out of sync!

Ever since I left CS6 to CC 2014, image sequences as jpeg files do not properly import into Premiere in sync anymore. I use Blender 3d to export render scenes as jpegs then convert them to h.264 mpeg4 video clips in Premiere. What happens is that the images upload into Premiere's project tab out of order, even though they are correctly ordered in my hard drive. Improper naming conventions are probably ruled out since their files extensions are _000 types, and I never had a problem importing sequences in CS6 anyways. Still image default duration is set to 1 in the general preferences. Does anyone know what is suggest? Thanks.

Good point, I am importing as separate jpegs each set to one frame, so it's not an image sequence as I thought.
My indeterminate media timebase and sequence are the same (29.97fps), though I have to say that even if they were different I don't see why that would be a problem.
Here is a screen shot of my images just after uploading them into the project tab, it is seen from first to last that file numbers appear out of order such as 066, 054, 072, 058...ect:
Is there anything else I could try?

Reset sequence after data import

Hi all,
I've got a problem where we import data into a table with an auto-incremented field for a primary key. After the data import, I can drop the sequence, check the max(primary key), and re-create it to start at the max value + 1. My problem is that I need to do this for a large number of tables and don't know how to write a script to do it. In the Create Sequence command, whenever I try to use a variable in the "START WITH" clause, I get an error.
Thanks in advance,
Raymond

Spool sequence creation scipt result in a file and then run it.
Or use dynamic sql.
Or You can "drive" sequence forward issuing select myseq.nextval from dual; apropriate times. If You need "drive" sequence backwards alter it with increment -1, issue select myseq.nextval from dual; apropriate times and alter it with previous increment.

The import was stopped, an error occurred during the phase DDIC_ACTIVATION

Dear all,
When I import the SAP_BASIS support package SAPKB70019 , it appears the error as below :
The import was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
     -   Error in phase: DDIC_ACTIVATION
     -   Reason for error: TP_STEP_FAILURE
     -   Return code: 0008
     -   Error message: OCS Package SAPKB70019, tp step A, return code
         0008
Notes on phase DDIC_ACTIVATION
In this phase the imported Dictionary objects are activated. This phase
can terminate due to the following reasons:
o   TP_INTERFACE_FAILURE: The tp interface could not be called.
o   TP_FAILURE: The program tp could not be executed. For more
     information, see the SLOG or ALOG log file.
o   TP_STEP_FAILURE: The tp step DDIC activation could not be performed
     successfully. To see the cause of the error in the activation log,
     choose Goto -> Log -> Queue.
     If you import two or more Support Packages in one queue, and you do
     not activate them in the correct sequence, activation errors may
     occur. In this case, the activation errors disappear when you repeat
     the activation run. To do this, choose Support Package -> Import
     Support Package Queue.
    A prerequisite of the Support Package Manager is that the Change and
    Transport System (CTS) is configured correctly. For more detailed
    information, read the online documentation available from Help -> SAP
    Library -> mySAP Technology Components -> SAP Web Application Server ->
    Change and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
I have used se11 to avtive the domain SEFS_CRAWL_ALGORITHM , but the error still exist.
Hope anyone can help. Thanks!
B.R
Michael

P762713 wrote:>
> Hi ,
>
>     This is general issue now a days occuring in Support Packs .The only solution for this issue is to delete structure ::
>
> these were the structure deleted from system afterwards patches were installed successfully.
>
> /1PYXXFO/SAP_PAYSLIP_____L0001
> /1PYXXFO/SAP_PAYSLIP_____T0001
> /1PYXXFO/SAP_PAYSLIP
>
> /1PYXXFO/SAP_PAYSLIP_____L0020
> /1PYXXFO/SAP_PAYSLIP_____T0020
>
> You can do this via Tcode se11 .give these info in data type & in turn you have to delete 1PYXXFO/SAP_PAYSLIP also.This has solved my issue & after this support pack went fine.
>
> Thanks..
> Mohit
>
> Edited by: mohit gupta on Sep 23, 2009 9:15 AM
Hi, mohit
      I have tried to use the t-code se11 to delete the structures, but the system telled me that they are all not exist .
A part of the queue log as below:
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Field KEY: Component type or domain used not active or does not exist
   Exactly one field SPRAS of type LANG: Selection as text language possible
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Field KEY: Component type or domain used not active or does not exist
   Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Exactly one field SPRAS of type LANG: Selection as text language possible
   Enhancement category for table missing
who can help me ?
thank you very much
BR.
Michael
Edited by: Michael Hong on Sep 23, 2009 12:36 PM

Sequence of the classes called in a standard BADI

Hi guys,
   I have a problem on the sequence of the classes called in a standard BADI occuring in different system.
   In the DEV system, the sequence called is A, B, C (Just to illustrate). But, in the QA and PROD system, the sequence called is B, C, A. Versions of each objects have been compared and found to be the same.
   Any ideas how to solve this?
   Thanks!

Hi Ndruzz,
Every BADI by default Implements an INTERFACE which already contains some methods with parameters.
So you have to find the relavenet method based on the related paramters (by checking the fields in that paramters) you have to double click on the method and to write the code.
see the doc
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.

Users opposing- the Import PO process

hi experts,
As we all know in case of import creation of PO, MIGO, and MIRO is a lengthy and tedious process as while creating PO we have to enter all custom duties and against each condition the vendor and if the PO has many items say 50 then it becomes really a tough job.
My issue is the import process is facing tough resistance from users.
For the import pricing procedure I have maintained the conditions for CVD, Basic duty of customs, edu cess, ADC, etc.
Since these conditions are at item level, the client is finding it very very tedious and difficult to go at each line item and fill in for all line items, if there are more items say 50 items for import.
Can we maintain these conditions-CVD, Basic duty of customs, ADC, etc at header level? Is this the right way? What I see is the problem that if the items are with different custom rate then it will be an issue.
As import POs are not with GR-based invoice verification, at the time of MIRO when entering bill of entry from custom office, for say 50 line items it so puzzling and confusing to enter the details in MIRO.
Experts please share with your experience what should be done to make the life of user comfortable at the time of PO and especially MIRO? And what is the right way?
With this type of process users have become against SAP, they feel there current system is better and comfortable then SAP- as making import po, then entering in each condition the vendor details and in MIRO to find against which item what is the duty?
please advice.
thanks and regards

thank you very much sairam,
before proceeding further I want to clarify some doubts, as access sequence is cross client and i have fear in doing that.
1) as you have mentioned Except the custom duty, rest all like CVD, Ecess1, Ecess2, ADC, SEcess.. all these are fixed values irrespective of material or vendor.
do i have to maintain different access sequence for each condition type? can i leave with one access sequence for all condition types ?
2) when creating the new condition table what fields do i have to select?
can i copy the std 0002 access sequence and insert new condition table in it?
3) Similarly for custom duty, when i maintain a different access sequence with material as a key how can i enter many materials in the field spec.value source
if possible if you can simulate the solution and send me the screen shot in mail i will be greatful to you
[email protected]
thanks and regards

Sequence behavior after importing via DataPump

Hi Friends,
I'm running Oracle DB 11.2.0.3 on Windows 2008 R2 SP1 Servers and I faced a strange sequences behavior after importing a schema via Data Pump.
The export is done this way:
EXPDP userid/password dumpfile= logfile= directory= remap_dumpfile=y (no news)
The import is done this way
IMPDP userid/password dumpfile= logfile= directory= remap_schema=(old_one:new_one) remap_tablespace=(old_ones:new_ones, so on...)
The import works fine. There are no errors and the sequences are as well imported with no warnings.
The strange behavior is that the sequences seems to "reset". When we call a sequence the NEXTVAL is just lower than the values already stored in the Database, and we get ORA-00001 a lot. The sequence should know that vale. I don't have this problem when using exp/imp, just via DataPump.
So that when we create an order that should receive the value of 100, as an example, because we have 99 orders on the system, Oracle suggest a value lower than 99 or even the number one value (01).
We then wrote a script to check the CURVAL of the sequences on the base schema to recreate the sequences using this initial value on the new imported schema.
Does anyone faced this problem before?
Any suggestions?
Tks a lot

Richard
I've tried what you just said.
Adding the parameter consistent=y makes Oracle to show a message like that at the beginning of the export
"flashback_time=TO_TIMESTAMP('2013-09-03 12:18:12', 'YYYY-MM-DD HH24:MI:SS')"
It warns me: Legacy Parameter CONSISTENT=TRUE, and replaces with flashback_time.
Really, I did not know about this behavior with this "old" parameter. I'm very appreciated about your help.
I was almost thinking it was a DataPump bug or something.
Thanks a lot Richard. I'll now update my scripts and make lots of test.
If you have more advices using this parameter please share us.
Cheers

Sequence of the import.

Similar Messages

Maybe you are looking for