Sequence of transports in CHARM ?

We have multiple transports (Workbench Requests and Customizing Requests) in a given Change Document.
What is the sequence of transports when the Change Document gets processed (imported) ?
Does it matter if the Change Document is normal correction or urgent correction type ?

Hi
no you can't define a sequence
they get imported in the order of release
say tr 1 and tr2 are there and tr 2 is released first so that will be imported first irrevelant of the type of change
hope it clarifies ur doubt
regards
prakhar

Similar Messages

Error when releasing Transports in ChaRM

Good Day;
When releasing a transport thru ChaRM I get the following error
"Release of system could not be determined. The error message is "/TMWFLOW/CRIT_OBJ061"
Any ideas?
Thanks
Don

Good Day Farzan;
We have the following systems
Solution Manager      (Netweaver)
Development System (Client 100 SAP 4.7)
Quality System      (Client 100 SAP 4.7)
Production System      (Client 100 SAP 4.7)
Regards
Don

Manage transports (without ChaRM) in Solution Manager?

Hi,
How do I manage transports in target systems (ECC, APO, etc.) using Solution Manager. We have the Dev systems (ECC, APO) connected using RFC to Solution Manager. Configuration (SOLAR02) will be done using Solution Manager. So the question is - how do we manage transports (without ChaRM being present) using Solution Manager?
Any suggestions/recommendations? I would greatly appreciate any feedback.
Edited by: GiveMeFood on Sep 22, 2011 10:05 PM

Hi,
One of the main features available with the Solution Manager is ChaRM. It has been introduced to basically deal with the diverse transports management and related control framework over the SAP lanscape. Having a Solution Manager and not using ChaRM defeats the purpose of installing a Solution Manager in the first place. A better approach would be to incorporate the features provided by the system.
In my opinion - you should configure ChaRM, else it would not make sense to have the SolMan in the landscape. You would start using one of the features which you already have !
Regards,
Srikishan

Sequence of transports

hai,
plz tell me Exact sequence of transport,
regards
rajasekhar

Hi:
Look at this thread for guidence on Sequence:
Re: Transport Procedure???
Part-1:
InfoAreas
Application Components
InfoObjects w/ Catalogs
InfoProviders
infoSources
Update Rules
Generated Export Datasources
Replicate Source Systems in QAS/PROD
Part-2:
InfoSources attached to the Replicated Data Sources.
Queries
Web Templates
Etc
Chamarthy

Foreign Transports Using ChaRM

Hi Gurus,
how can we handle the foreign transports using ChaRM? please provide me some inputs..
thanks in advance

hi
seems this is posible,refer this
[Re: Attach external transport to Charm change request|Re: Attach external transport to Charm change request]
but looking forward to here more
jansi

Automatic transport with ChaRM

Hi!
We transport currently all transports with u201EIMPORT ALLu201Cmethod and are thinking about the implementation of ChaRM.
This method (u201CIMPORT ALLu201D) allows us to transport the transports at 10 and 14 ou2019clock automatically from DEV into QAS system
As we know ChaRM works with SINLGE IMPORT method (CTC=1).
Questions
1) Do we have any possibilities for the automatic transport in ChaRM?
If Yes, how does it work?
2) Do we have any possibilities for locking of objects and mechanisms to avoid "outrun of transportsu201D?
Developer 1 works with objects A, B, C, changes the object B and transports them into QAS system.
Developer 2 works with objects B, G, H, transports the object B into QAS system.
Now he has the other version of object B, because the object B was changed by developer A.
Does ChaRM offer some mechanisms to avoid u201Coutrun of transportsu201D?
Any helpful information will be very appreciated and awarded with points.
Thank you very much!

Hi!
Thank you very much again.
The problem is we would like to use non-ChaRM and ChaRM transports simultaneously in same DEV client (e.g. 100). The same applies for QAS system (e.g. client 200).
We would like to integrate other transport routes into ChaRM.
Do you think we have possibility to integrate this.
Please have a look into our system landscape [SAP system landscape |http://www.file-upload.net/view-1086963/SDN_TMS_Ist_Soll.jpg.html].
Please help to clarify....
I awarded you point...

CHARM : Sequence of transport request to import

Hi,
I'm configuring CHARM and found out below issue.
Scenario.
1) Charm project with project type implementation was created in SOLMAN. The type of change is normal correction. All transport request was created under 1 task plan. The transport was created based on configuration and some of the transport request have dependency to others transport request.
For example.
a)GL account need to be created in FI and was assigned to TR002.
b) MM need to configure the GL account that was created in a) and was assign to TR001
Issue
When the TR was release, how do we ensure that the sequence of import to QAS client and PRD client must follow the dependency of the TR created?
Appreciate your input.
regards,
Biah

Hi Sir,
I am working in SAP Solution Manager. I would like to know some concepts regarding CHaRM:
Currently our project is using Transoport Proposal. We will soon shift using CHaRM. But I am not aware of the Technical concepts.
1. How to configure CHaRM with the Tranport Proposal Flow.
2. How to navigate in CHaRM? (screenshots can help).
3. I am aware of the process but still after creating a CHaRM how do the Developer navigate to do a change in DEV system.
will he go through CHaRM. (please explain me).
4. Also explain me the total process from technical point of view till the CHaRM closure.
5. I am aware of SOLMAN in this process where the Charm requests are collected and monitored.
Hope I will get a good guidance from your end....

Migrating Transports via CHaRM to the same system more than once

Good Day;
Does anyone know if CHaRM has the capabilities to migrate transports (within a maintenance cycle) to the same system multiple times?
Let me explain.
When we move a maintenance cycle (release) through our landscape we move from;
Development system - Quality system - Volume system. Then to production
UAT is being done in both the quality system and the volume system.
Once all testing is complete, we refresh the volume system with a fresh copy of the production system and re-import all the transports. This is to allow our BASIS team to do regression (batch) and load testing.
Is there a way to use CHaRM to migrate the transports or is this something that needs to be done manually (as it is today).
Thanks All,
Regards
Don Newton

Just Ceaning up

SCC1 Transport in CHARM

Hi Experts
I am configuring CHARM at one of our client and the scenario is typical..
Scenario:
Client has Dev -QA-PRD Sytem, where as in DEV has 100 & 200 Client. Initially All the tranports will move from Dev-100 to Dev-200 and then to QA System. Hence,
Q- How shall I define the Transport Route
Q -How can in define Logical component
Q- How can I include in CHARM
Regards
Aftab

Hi Aftab,
this can be implemented.
1. Define a tranport route from DEV100--->DEV200. U can specify the client in 'Standard Transport Layer' tab. Then to QAS and PRD accordingly.
2. Create a logical componenet and mention DEV100 as DEV system and DEV200 asTEst system , QAS as ur Pre prodcution and ur PRD. Or you can define the roles as per ur wish.
3. Assign this logical componenet to ur solution and add that to the project. You can activate ChaRM for this project.
Please get back in case u have any doubt on this.
Rajeev

Error message in solution manager while importing transport using CHARM.

Hi All,
I am gettting below message while i am trying to import a change request using CHARM from solution manager
"You are not allowed to work on a CR for UNITEOPS"
"Data type-specifc customizing missinge for a data type"
But other user in our team able to do the import of change request. I checked all roles and authorization are same for both the user but still it is not working for my user-id and it is working for my team member user-id
Can you please guide? Is there any customizing missing for my userid?
Thanks

Hi,
Perhaps the info in this thread could be useful:
ChaRM roles or profile missing for Developer and Change Manager
Regards,
Srikishan

Approve critical objects in transport requests (ChaRM)

Hi folks!
When trying to create transport of copies from within a Change Document (status 'to be tested') the system checks for critical objects in transport requests and prompts a warning that critical objects are to be approved.
I do not want the Change Manager to approve every transport request containing critical objects. I would more likely use this feature as information for the Developer so he is aware of working on critical objects. The Developer should be able to make the approval.
What I found out: only the user whos Business Partner is assigned to Partner Function 'Change Manager" is allowed to make the approval.
More detailed it seems to be Partner Function of type "0008 responsible person"
I tried changing Partner Function Developer from "0016 service group" to "0008 responsible person" but the system won't let me have two Partner Functions of that type in one Change Document.
Any suggestions?
Thanks in advance.
/cheers

Hi,
For any user to approve the change req or change doc, he should have the authorization
In your case Developer has to approve means
1. Create a Action definition and maintain the processing parameters for the definition, select the partner fn as Developer
2. Create the customized status in your status profile and its corresponding Authorization code also.
3. Assign the Authorization code for Developer under teh authorization object B_USERSTAT
By this Developer wil get the authorization for approving the change doc for the particular status
If solves your query then mark the thread as answered
regards
Naveen

Merging Java Transport request with Abap Transport Request in Charm

Hello All,
We have activated the Change request Management in Solution Manager. Therefore transport request of type workbench and customising can be created when you choose action 'Create Transport Request'.
However we have some SAP systems that have CTS+ integrated which allows to generate transport request number and attach objects in PI Integration Directory - java transports.
Question is - Is there a way we can integrate the java transports generated in these SAP systems with Solution Manager CHarm and transport creation.
Or can we assign the java transports to charm in any way.
We are basically looking for how when users create Charm, the abap and java transports relating to the charm are generated and created only from Solution Manager manager or how these two transports can be linked together in Solution Manager.
Thanking you in advance for your help.
Tolly

Hello Friends
I have read the links and followed the instructions and tried to create object
TABLENAME R3TR TABU and tried to save it.
I keep getting a warning message
Note: ZTABLE1 is an application table
Object TABU ZTABLE1 has object function "k", but no key.
(I don't know what key to enter. I tried the Key field name, but it said 'Enter Numeric values only').
If I ignore and save and try to create transport request and then import it on a different server, again only table structure is getting transported and not the contents/data of the table.
I would appreciate if some one can please let me konw what I am doing wrong.
Thanks
Ram
Edited by: Ram Prasad on Jun 2, 2009 3:38 PM
Edited by: Ram Prasad on Jun 2, 2009 3:40 PM

ChaRM: Error while releasing transport

Hi Team,
I have configured ChaRM in Sol Man (Sol Man 7.0 EHP1, SP24). When i try to release transport thro ChaRM, i am getting below error.
No valid TM target found. Message number:/RTC/TMM00154
Your valuable inputs required
Thanks
Kumar

Hello,
Perhaps you would like to review this [guide|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089860&_SCENARIO=01100035870000000112&_OBJECT=011000358700000657692007E]
Regards,
Paul

ChaRM: Several Transport layers

Hi!
We would like to implement ChaRM for the 3 tier landscape (DEV:100 --> QAS:200 --> PRD:100) with several transport layers and transport routes:
a) u201CZDEVu201D u2013 Standard transport layer
b) u201CSAPu201D u2013 SAP transport layer
c) u201CYCSTu201D u2013 transport layer for internal customizing
d) u201CZEXTu201D u2013 transport layer for external vendor
The problem we have is that transports within ChaRM are supported in the standard transport layer of each client.
It means that the transport requests of transport layers u201CYCSTu201D and u201CZEXTu201D that are non-standard transport layer will be ignored by CHaRM.
Has some one of you experience with configuration of ChaRM with several transport layers and can give an advice what is the best solution in my case?
Possible solutions:
a) Creation of additional clients in DEV system and assigning them other standard transport layer (e.g. DEV:200 gets u201CYCSTu201D, DEV:300 gets u201CZEXTu201D as standard transport layer)
Then it should be possible to create three maintenance projects:
1) MP1: (DEV:100 --> QAS:200 --> PRD:100) with transport layer u201CZDEVu201D
2) MP2: (DEV:200 --> QAS:200 --> PRD:100) with transport layer u201CYCSTu201D
3) MP3: (DEV:300 --> QAS:200 --> PRD:100) with transport layer u201CZEXTu201D
b) Migration of all the non-standard layers to standard transport layer.
c) Separation of ChaRM and none-ChaRM transport layers (TMS)
It would be great to get some feedback/suggestions/input
Thank you very much indeed!
regards

Hi
Sorry for my ignorance but the Transport/Routes/Layer are releated to the Development Class.. and ChaRM dont take in count this...
At the end you have 3 Development Clients...100/200/300..you need to create 3 project..
thxs
Wence

ChaRM: transport layer/routes used by ChaRM

Hi!
We have very complex trasport system settings and would like to implement ChaRM with parallel usage of transports in non-ChaRM environment.
We have a lot of transport routes (between DEV:100 and QAS:100) (e.g. SAP, ZDEV, ZFAD, ZGFA, YDAS).
How can we split the transport routes for ChaRM and transport routes for transports without ChaRM?
Which transport routes will be used with ChaRM?
Thank you very much!

Hi
as already mentioned in one of my replies to your last thread, ChaRM always (and only) uses the standard transport layer (route) per client.
This one and all other ones can be used for non-ChaRM transports. This is standard TMS functionality.
But you have to check if the "ChaRM check" in your project configuration accepts your TMS settings. Maybe the other transport layers/routes make waves. Then you have to change them...
regards
Andreas

Sequence of transports in CHARM ?

Similar Messages

Maybe you are looking for