Sequence only has one channel of sound

I have a few sequences that I have added to a master sequence and only have one channel of sound in the master sequence.
In the actual sequence of each sequence that was added I have 2 channels of sound.
What would correct this issue?
Or does cut and paste everything in each sequence into my master sequence work better?
David

re: the decklink comment - that was directed to the thread jacker ... lol.
re: cloned system drives. Updating does not create a clone automatically. It is something you have to do. In the interest of locking the barn door after the paddle has been lost upstream - get a firewire drive as large as your system drive. Download a copy of Carbon Copy Cloner (shareware) and when your system gets working again, Clone the working drive to the firewire drive. This is your insurance when you update the OS, QT and/or any of the FCS pro apps.
Once you have a clone, if your update goes wrong, you can copy the clone back over the bunged installation and be back up and running within an hour or so.
Regarding FCP 6.0.4, perhaps someone archived a version (or you can find it on the FCP updates page). If you use Software update, it will want to install the most recent version.
x

Similar Messages

  • Capture Prob -- only capturing one channel of sound

    I'm capturing hdv, as I always do, but for some reason I'm only getting one track Mono A1 of sound. When playing back or capturing, I am hearing both tracks, left and right, playing through my speakers.
    But when I capture, I only get one track. I need the second track because I had two mikes and two separate channels coming through.
    Any suggestions on what I can do? Can't figure why it's only capturing one side of audio... Thanks.

    re: the decklink comment - that was directed to the thread jacker ... lol.
    re: cloned system drives. Updating does not create a clone automatically. It is something you have to do. In the interest of locking the barn door after the paddle has been lost upstream - get a firewire drive as large as your system drive. Download a copy of Carbon Copy Cloner (shareware) and when your system gets working again, Clone the working drive to the firewire drive. This is your insurance when you update the OS, QT and/or any of the FCS pro apps.
    Once you have a clone, if your update goes wrong, you can copy the clone back over the bunged installation and be back up and running within an hour or so.
    Regarding FCP 6.0.4, perhaps someone archived a version (or you can find it on the FCP updates page). If you use Software update, it will want to install the most recent version.
    x

  • Why only one channel of sound in sequences?  Please someone try this quest

    When I add a sequence to a sequence, I have only one channel of sound but, when I open that sequence I have 2 channels of sound.
    Is it a sequence setting and if it is I see:
    outputs 2
    downmix 0
    grouping: Stereo selected
    Dual mono not selected.
    I swith these around a bit but get no change.
    My raw footage say "2 Mono" from my Sony DSR PD-150 at 16 bit, 48 khz.
    I usuall use one channel for camera sound and 2nd channel for mic.

    the number of audio channels that your nested sequence will contain is the same as the number of audio outputs you have selected for that sequence ...
    for example, if you create a sequence with 10 tracks of audio, but have only set the sequence to have 2 audio outputs, then when you nest that sequence the nest will have only 2 tracks of audio ... change the audio outputs to 4, or 6, or 8, or 10 etc regardless of how many tracks you actually use, and the sequence, when nested, will have the same number of audio tracks as the sequence has audio outputs
    ... ok, so that explains the relationship between audio outputs and the number of tracks of audio that a nested sequence contains
    so why are you getting only one channel of sound when you edit it in to another sequence? my guess is that you are only patching 1 channel ... load the source sequence into the viewer (drag and drop), now check in the patch bay area at the left of the timeline window to make sure that your a1 to A1 and a2 to A2 connections are not broken ... and edit it in.
    cheers
    Andy

  • FCP only capturing one channel. what's up with that!?

    in FCP 7 while i am logging and capturing HDV footage off of my canon XLH1, only one channel of audio is captured. originally the audio was shot using 2 separate channels, in fact, i can hear both channels playing back (each on their own sound level/they are not mixed) while the capture is happening.. but when i'm done, FCP has only captured one of the channels.
    how can i resolve this problem?

    in my capture bin, after i've captured the clip, it shows that only one audio clip was captured. when i drag it into the timeline, only one audio channel is present.
    my lost channel was on a wireless mic, as was the saved channel.
    fcp is only capturing one channel even when i log other tapes that did not have separated audio channels.
    i'm guessing there is some setting that is now off while i capture, because it used to capture audio just fine last week.

  • Only getting one channel of audio with mic HELP

    I had been using Garageband with the built in mic to do my podcasts. I just got some real gear.
    Here is what I got... M Audio USB fast track, MXL V63MBP running on 10.3.9
    I am only getting one channel of audio through the mic. I have the settings on the mixer right and I have gone in the sound preferences and made sure it was right.
    On the track in garageband, I made sure that the real instrument settings were set to Stereo. I have been messing around with this thing for an HOUR and I am still only getting one channel of audio. I've done everything I've been able to come up with in google and still nothing works. If anyone has any ideas ,that would be swell because I'm beginning to think that the crappy built in mic on my mac is looking really good about now.

    You're welcome.
    The common confusion is that 'Stereo" means two speakers and "mono" means one. Stereo actually means two different signals going to the two speakers. Since a Mic is a mono input device, you set the track to mono so that the same sound comes out of both speakers. Enjoy --Hang

  • Reciever only has one port

    I just hooked up my Apple TV without any issues, except my home theatre reciever only has one port for HDMI and one Optical Audio port.  This means in order to get Apple TV on my surround sound I have to manually switch the optical audio cable from the back of my sattelite reciever and then back again to watch satellite television.  Any possible solutions? 

    Welcome to the Apple Community.
    You could consider an HDMI switch.

  • Computer only plays one channel of audio

    I use an HP Sleekbook 14 PC and recently it stopped playing out both channels of audio. I only get one channel. Any easy fixes?

    Hello, @festerdude 
    Welcome to the HP Forums.
    It appears you've lost audio. I will try to help you with this.
    No Sound from the Speakers (Windows 7)
    No Sound from Speakers (Windows 8)
    Follow the document for the version of Windows installed on your notebook.
    Make sure that you've updated the drivers, use the HP Support Assistant for this.
    Please let me know the results and if you run into any issues.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket .. Help!

    My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
    Help!

    No, unless you are using a home theatre system already, your only option is to connect to the TV.

  • How do you connect a usb printer and usb external hard drive to the airport extreme, as it only has one usb port?

    I'm thinking about upgrading my old 802.11g router for a new airport extreme. Can it connect to a usb printer and external hard drive at the same time and acutally work. It only has one usb port on the back.
    thank you!

    To add multiple USB printers and/or HDDs, you just first need to connect a USB hub (powered prefereably) to the AirPort's USB port, and then, add the USB devices to the hub.

  • Imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one?

    help! imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one? need answers ASAP!

    That is your answer then.
    Large is 960x540
    Medium is 640x480 (or 720x480)
    Mobile is probably 480x272.
    It is offering you the sizes that make sense given the size of your source material.
    As a trick, you might try this. In your project, put a short 640x480 clip in the project as the first clip of the project. Then keep the rest of the project as is. See if it will let you share now in Medium. It will not look as good, because there are not enough pixels to cover the Medium size, but it might work.

  • 11.3.300.257 only has 2 channel audio

    After update the player to 11.3.300.257 few days ago.
    In IE8, all audio of flash video only has 2 channel left.
    Before this, I have 4.1 channel.
    There is no problem on Chrome or Firefox.
    What can I do to have 4.1 back?
    Thanks.

    Could you take a minute and vote for the following bug and include a copy of your system's dxdiag report?
    https://bugbase.adobe.com/index.cfm?event=bug&id=3211050
    Thanks,
    Chris

  • Can I put a dual processor in my power mac g5 which only has one processor right now

    Can I put a g5 dual processor into my power mac g5? I have a power mac G5 but it only has one processor so I wanted to upgrade to the G5 dual processor found in the later version power macs. Would I be able to do this? If i could do this would i need another fan or other parts? I was also thinking of putting more ram in and another hard drive. PLEASE HELP

    Exactly what to do with ram and video is hard to say without the model details.  You can go to http://www.everymac.com and click on Power Mac G5 and then find the machine you have.  The detailed info on the machine will show how much and what type of ram you can put in (I always use ram from either OWC, http://www.macsales.com or Crucial, http://www.crucial.com) and also gives the installed video card info.  OWC would also be a good source to see what video cards are available that will work with that logic board.

  • Adobe story- Film Script only has one template. why? For e.g. the TV script has more templates.

    Adobe story- Film Script only has one template. why?

    Default Film script should still be the same. So first verify this by creating a new Film script with the default Film script template. (it should be in default formatting)
    Now to change the template of the affected document, open Edit > Template option.
    In the 'Select Template' dropdown, select 'Film Template' and click on OK.
    If you still face this issue, you can 'Import' a template from your disk.
    - download the default template that is attached in this post. ( Template file is inside the '.zip' attachment. So you need to unzip the downloaded file first)
    - open the template dialog and click on Import button and select the downloaded file.

  • Waveform Chart only shows one channel or combines both channels?

    Hi,
    I have 2 analog input channels and data was obtained by sampling at 500Hz and saved into a text file.
    Can any one take a look at my VI and tell me why I am either only getting one curve plotted in the Waveform Chart or it's simply a combination of both of my inputs?
    Thanks.
    hellolv
    Attachments:
    FILE_3.vi ‏48 KB

    Hey hellolv!
    The issue you are seeing is actually a pretty common one.  For a chart to update two plots the input to that chart must be a 2D array.  Basically this means that all you need to do is insert a Build Array function right before the chart.  I coded a quick example that does this for two random numbers in a while loop. 
    If you have questions I might suggest that you implement this in LabVIEW.  You could also check the Context Help (Ctrl+H) and the Charts.VI in the Example Finder (Help » Find Examples).
    Hope this helps!
    Andy F.
    Message Edited by Andy F. on 05-01-2006 12:15 PM
    Message Edited by Andy F. on 05-01-2006 12:15 PM
    National Instruments
    Attachments:
    2DPlotWaveformChart.Png ‏5 KB

  • Time machine now only has one network, where has the second gone?

    suddenly my time machine is only showing one wireless channel to use, when previously there were two. how can i get the two networks up and running again?

    Get a larger drive for your TM backups.
    The recommended size is 3 times what you are backup. So if 315 GB is a backup then you need a 1 TB drive.
    Allan

Maybe you are looking for