Sequence replicator bug : when source image has "colorize"

I ran into this funky thing today. Easy to repeat:
1: take any simple image as your source - I imported a small image from photoshop (a PNG).
2: Colorize it
3: Replicate it.
4: Add a sequence replicator - I added a scale sequence from 0% TO 100%.
Replicator only colorizes the image for a few frames as it scales up, then it drops the filter completely.
Anyone else getting this? I'll use the "feedback" page to report this.

Nope. Works fine for me. But let me ask you this:
Does your colorize filter last as long as the sequence replicator? If you have a short image, say 3 seconds long with a 3 sec long colorize filter on it and you replicate that, the color will be obeyed in the replicator for only as long as the filter exists on the original image.
Therefore, if you want the color to remain for the length of the sequence replicator, then you have to lengthen the colorize filter to the same length as the sequence replicator.
andy

Similar Messages

Restoring images when source file has been removed

Hi - I've been working on a wedding where I imported a load of TIFFs into Lightroom and did some work on them. I've since accidentally deleted the folder containing the source TIFF files, but I can see the "worked" thumbnails still in Lightroom.
Is it possible to apply the settings that Lightroom seemingly stores about each image to a new raw image to make a new set of TIFFs?
Cheers
Gary

Judith, that should do it! Just create Tiffs named as before with no new adjustments. Might truly fool LR back to where you want it.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Is there a known bug when animating images with edge and dps?

Hi, I've seen some oddities when using edge to create html5 elements for Indesign. Essentially I have spent hours trying to get an image to scroll from left to right. Works fine in a browser and worked fine in dps and iPad yesterday. Using the same setup: the stage in edge is 768x1024 I then animate a large image in the x axis 0 to -500 over 6 secs, I then apply a ease in and out. I then save the HTML, and publish for dps. Within dps I goto file > place and select the published file that edge generates for dps. I then update and preview either in desktop or iPad - the file loads but the animation does not play.
Weirdly if I follow the exact same steps but add some other bits of animation ie drawing a square and moving it, the animation plays. If I open an existing file I.e your inbuilt tutorial files, delete the content and redo the image animation it works, it's only in a new project that it doesn't preview or play in iPad?
Another issue I have is when it does load the animation doesn't load in that well and shows most of the bottom and then after a .5sec the rest of it loads. so it's a vbit scrappy - any suggestions?

Thanks,
To give you a bit more info, we used my bosses computer and he was able to recreate the same issue with the animation not loading. however if we change the process by using the rectangular frame tool and using the web content folio overlay it works, and inserting the HTMLResources.zip. However we noticed that the animation did not run smoothly, very jerky like the ipad was struggling. I've now corrected this, by changing the properties of the image within edge from div to img. This seem to have worked nicely.
So there are some weird things going on, more so around the publishing function within edge.
Many thanks

Importing when source file has a new line

Hi,
While importing a pipe " | " delimted (will apply to any delimter) text file, I have Long text field from source system which is having Product Descriptions in it. Users have enterd the data in multiple lines in that field in the source system, which is a valid case .
When we have extracted the data from source & trying to Import in Import Manager, the "enter" is taking a new line & hence as a new row. How do I import the data keeping the new lines in MDM?
Product_Id|Description|Language
001|Test 1|EN
002|Test
2|EN
003|Test 3|GB
here the Product Id 002 should be imported in text large field with description having the new line character.
Thanks,
Ketan

Ok so the best way is to extract your data from SQL server as XML format into this kind of format:
<?xml version="1.0" encoding="UTF-8"?>
<Products>
<Product>
    <Product_Id>001</Product_Id>
    <Description><<![CDATA[ Test 1]]></Description>
    <Language>EN</Language>
</Product>
<Product>
    <Product_Id>002</Product_Id>
    <Description><<![CDATA[ Test
2]]></Description>
    <Language>EN</Language>
</Product>
<Product>
    <Product_Id>003</Product_Id>
    <Description><<![CDATA[ Test 3]]></Description>
    <Language>GB</Language>
</Product>
</Products>
It is the only way to handle carriage return in Import Manager; with delimited text it is not possible.
Let us know.
Edited by: cau vianney on Mar 1, 2010 3:17 PM
Edited by: cau vianney on Mar 1, 2010 3:19 PM

Stacked Column Report bug when one series has zero for data

Hi,
I'm encountering an issue with the stacked charts. In my chart, I want to show the total of active and expired records for each year. I created a series for each, and the SQL for them is below:
Active (1st series created):
select '' link,to_char(preparedate,'YYYY') label,count(*) Active
from cts.contract
where preparedate is not null and
to_char(preparedate,'YYYY')>to_char(sysdate,'YYYY')-10
and expired = 0
group by '',to_char(preparedate,'YYYY')
order by '',to_char(preparedate,'YYYY')
Expired (2nd series):
select '' link,to_char(preparedate,'YYYY') label,count(*) Expired
from cts.contract
where preparedate is not null and
to_char(preparedate,'YYYY')>to_char(sysdate,'YYYY')-10
and expired = 1
group by '',to_char(preparedate,'YYYY')
order by '',to_char(preparedate,'YYYY')
When I see the chart output, I expect the chart to show the stacked columns with expired stacked on top of active, and ordered by year. However, for the two years in our database where there are no active (series 1) records, only expired (series 2) ones, these bars are displayed to the right of the other years. Oddly, for the year where all records are active, and none are expired, there is a sliver at the top of the bar for that year showing as the color for expired, and hovering over that portion of the bar displays zero. I understand that with the other two years where the series with zero would be stacked on the bottom, and therefore not visible, but why does the chart put these years after the other ones that are in order? Since my records are from 1998-2007, and the two years without series 1 records (active) are 1999 and 2002, the years are shown in this order: 1998, 2000, 2001, 2003, 2004, 2005, 2006, 2007, 1999, 2002.
Any help with how to make these two years show in the correct order with the others is appreciated.
Thanks,
Brian

After switching from Thin driver to OCI the problem went away.

SGD 4.5.907 Installer script bug when ttaserv/ttasys has /bin/tcsh shell

When trying to install SGD 4.5.907, I kept getting this error, even though the two users were properly defined:
===============================================================================================
## Executing preinstall script.
ERROR: Required users (ttaserv and ttasys) are not correctly defined.
Setup will now exit.
You must create two user accounts before you can install Secure Global Desktop.
- The user names must be "ttaserv" and "ttasys".
- Both must have their primary group set to "ttaserv".
- You can use any UIDs and GID you want.
- Both users must have a valid shell, for example /bin/sh.
- Both users must have writeable home directories.
- We recommend that you lock the user accounts (passwd -l).
===============================================================================================
After searching for the actual pre-install script and figuring out how it works, I saw the test for user accts and realized it didn't account for a "valid shell" like /bin/tcsh, since it was using an sh/bash type of test construct.
If you want to argue whether or not TCSH is a valid shell, be my guest, but the installer should either handle the shell or the error msg should be a little more clear like "SGD requires an SH, or BASH type shell"

@JRoesler :
The script for installing the users during installation when the users are not created is included some version before the 4.50.907
The SGD version here is only 1 minor version before the latest release.
@aspenhedge:
If I look into the rpm (for Linux install) I don't see a check for a valid shell. It does however try to 'su' into those accounts. I might be wrong in this one.
Can you manually use 'su ttaserv' and 'su ttasys' without any problem? Do these users have a valid home-dir for example.
- Remold

Source Image brightness change in Color Finesse Full Interface

Hello All,
I noticed that my source image has a brightness/contrast change when I view it in the Full Interface of Color Finesse compared to the way the image looks in the composition window of AE. The Full Interface image is darker and lacking the details in the shadows that I can see in the AE compositon panel.
Please see attached screenshots
LUT - NONE
LUT 601 Gamma
AE Compostion Window
The Footage is from "Color Correction Handbook" by Alexis van Hurkman
How can I color correct with a difference like this???, Which is the true picture Color Finesse full Interface or the AE Comp window????
Also, when in the Full Interface mode of Color Finesse, when I choose from the view menu PRIMARY PREVIEW LUT - NONE the image is way, way darker than if ITU.R 601/709 or SMPTE GAMMA is chosen.
I'm trying to learn color correction but this is adding confusion to the mix.
Is it my monitor settings, my color profile, a combo of the two or something else. I read the Color Finesse Manual re: why use a REAL monitor, but at this time I don't have a Real Monitor and right now my work is primarily for the web. Web video is seen on a computer, so I THINK my computer monitor should do- for now-, if its calibrated correctly and I choose the correct color space etc....
By the way, setting the monitor/color space and all that related jazz is very confusing. Adobe needs to make it easier to set it correctly, or at least write it out in PLAIN- step by step english.
Thanks in advance
I use a AE CS4, With Color Finesse 2.1.12 on a Mac OS 10.6.6

Sorry I missed this thread going by.
I just loaded in what I think is the same footage as you (10_SmilingWoman_Over2shot.mov) in case there was some codec issue, and I get a match between AE and CF. This is on a Mac, although that shouldn't make any difference.
Look in the Color Finesse Preferences. In the General tab there is a checkbox for "Use Traditional Gamma". In most cases you will want that to be checked. This checkbox has to do with the continuing changes in gamma handling in AE, QuickTime, MacOS X, etc. We provide it as an option so that you can get a match.
There is a similar checkbox for the external preview monitor in the Previews tab, since gamma handling is often different between the computer monitor and the external monitor.
Also, are you using color management in AE? Color Finesse is not color managed, so that would account for a color difference.
Finally, you typically want CF's Primary LUT set to "None".
Hopefully something in here will help. Again, sorry I missed catching this thread earlier.
Bob Currier
Synthetic Aperture

Bug when save area flash to image on server

hi all,
I've a problem when save area flash to image on server (both Win or Linux), but on local (OS: Window) it allaway runs well. I try to find this bug, when user "loadMovie" function it's bug, but i don't use "loadMovie" function it runs well (on Sever)
source below:
* Print Button has been clicked
function print_me(){
    trace("printing...");
    var _loc4 = new flash.display.BitmapData(300,300, false);
    _loc4.draw(this);
    my_mc = _root.snap_mc;
    my_mc.cont_mc.attachBitmap(_loc4, 5, "auto", true);
    my_mc.cont_mc._width = 200;
    my_mc.cont_mc._yscale = my_mc.cont_mc._xscale;
    var _loc2 = new flash.display.BitmapData(my_mc._width, my_mc._height, false);
    _loc2.draw(my_mc);
    myclr = "";
    for (i = 0; i < _loc2.width; i++)
        for (j = 0; j < _loc2.height; j++)
            clr = _loc2.getPixel(i, j).toString(16); // cannot get color of this pixel when it runs on server(all away return FFFFFF - white) , but on local it runs well
            myclr = myclr + (clr + ",");
        } // end of for
    } // end of for
    var _loc3 = new LoadVars();
    _loc3.w = _loc2.width;
    _loc3.h = _loc2.height;
    _loc3.clr = myclr;
     _root.result_.text    = myclr;
     // send php save image
      _loc3.sendAndLoad("http://example.com/save_image.php", _loc3, "post");
var mclListener:Object = new Object();
mclListener.onLoadStart = function(target_mc1:MovieClip) {
   trace("start");
mclListener.onLoadComplete = function(target_mc1:MovieClip) {
trace("complete");
//abc();
mclListener.onLoadInit = function(target_mc1:MovieClip) {
   trace("onLoadInit");
// Print when load image completed
    print_me();
mclListener.onLoadError = function(target_mc1:MovieClip) {
   trace("error");
var image_mcl:MovieClipLoader = new MovieClipLoader();
image_mcl.addListener(mclListener);
_root.mc.loadMovie('http://example.com/box_rose_frame.jpg');
any body help?
thanks

thanks your help.
I fixed it: if use "loadMovie(url)" function with
- Url: remote, ex: http://example.com/abc.jpg => errror
-Url: local, ex: ../../upload/abc.jpg => run well
it's fixed
Regard

Bug when exporting large images

I found this bug in Flash 8, so I just downloaded CS5.5 trial and I see the same problem.
When I increase the image export resolution to get a larger image, at one point the lower section of the image became white (the image has the appropriate size but the content is not rendered in the lower section). As bigger is the image, larger is the white fraction. The amount of useful pixels always stay around 10 or 13 megapixels. Here some examples:
Original image was 3375x6710 pixels in the left one and 2625x5219 en the right one. Any idea to solve this?? Can anyone reproduce this problem?

That article is regarding the size of the bitmaps you can put INSIDE the project, and the issue I'm experiencing is regarding the size of the output when you use the "Export image" function.
Actually I got the same problem even if I delete all bitmaps from the stage and try to export only the vector features (lines, text, etc...).
I can't see clearly how the limit explained in that article could be related to a limit of exported images.
As example, the following image shows the same issue, but this time of a project with only vector data, no bitmaps at all, you can see how the rendering is truncated.

Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix.

Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix. Worked fine until now. Thanks

I am not sure what's happening with IE9 (no live site) but I had real problems viewing your code in Live View - until I removed the HTML comment marked below. Basically your site was viewable in Design View but as soon a I hit Live view, it disappeared - much like IE9. See if removing the comment solves your issue.
<style type="text/css">
<!-- /*Remove this */
body {
    margin: 0;
    padding: 0;
    color: #000;
    background:url(Images/websitebackgroundhomee.jpg) repeat scroll 0 0;
    font-family: David;
    font-size: 15px;
    height:100%;

When shooting source images for "HDR Pro", is it better to using 16 bit TIFF rather than 8 bit JPEG?

When shooting source images for "HDR Pro", is it better to using 16bit TIFF rather than 8 bit JPEG?

Yes, you will bracket the exposure.
Take as many shots as you need. Take a normal shot, underexpose twice or even three times and then overexpose twice or three times.
That's how the camera will register all teh details in the image - in the highlights, in the shadows and in the midtones. When you bracket, remember to change shutter speed (if you shoot manual, that's what I do), not the aperture because you will end up with different depth of field.

Premiere CC 2014 "Match Source" bug when exporting multiple clips

Getting a strange bug when trying to batch export.
The source clips are 4K MP4s. When exporting individually I use the Match Source button in the export dialogue and it correctly matches to the 4K frame size when sending to queue in Media Encoder.
If I select multiple clips and batch export them, selecting "Match Source" they come out as NTSC DV 29fps 720 x 480. The only way to work around this is to manually enter the frame values in Media Encoder after queuing.
Anyone come across this? Anyone at Adobe aware?
System Specs:
Mid 2010 Mac Pro 2 x 2.9GHz 6 Core Xeon
32GB RAM
nVidia GTX 680
240GB SSD boot drive
2TB internal cache drive
Adobe Premiere 8.1.0 (81) Build
OS 10.8.5

Do you have a utility to check your computer temperatures?
You MAY have a hardware problem, since video editing puts a LOT of stress on all components... below is not exactly the same, but worth reading
BSOD shutdowns http://forums.adobe.com/thread/1427408?tstart=0
http://blogs.adobe.com/kevinmonahan/2014/01/13/computer-shuts-down-with-premiere-pro-or-af ter-effects/

Quick Time 7.0 Pro (7.7.3) on Win 7 Home Prem 64-bit, Pro paid for, valid registration code, Open Image Sequence (and resulting time-lapse movies) has quit working after several successful operations. What do? How fix? Thanks.

Quick Time 7.0 Pro (7.7.3) on Win 7 Home Prem 64-bit, Pro paid for, valid registration code, Open Image Sequence (and resulting time-lapse movies) has quit working after several successful operations. What do? How fix? Thanks.

This tip is ready for submission.
It REPLACES the prior version in the Time Machine forum, at: http://discussions.apple.com/thread.jspa?threadID=2057525
Additions/wording changes to items C3, C4, C5, D4
New topics C9, C10, C11, and E4

[svn:osmf:] 14754: Fix bug FM-555: RTE when SerialElement child has a load error.

Revision: 14754
Revision: 14754
Author:   [email protected]
Date:     2010-03-15 09:25:26 -0700 (Mon, 15 Mar 2010)
Log Message:
Fix bug FM-555: RTE when SerialElement child has a load error.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-555
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/TraitLoader.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/compositeClasses/TestTraitLoader.as

(Removed)

HELP : Buggy "Sequence Replicator" ???

someone please help me find out if it's ME or if there's a bug with sequence replicator.
1: I replicate an object... ANY object
2: Replicate it so it's not a rectangle, but an image (any image is fine... maybe make a shape and drop it in the well
3: Do a random fill so the object you're replicating is in a bunch of random places.
GOOD? Good...
NOW, apply the sequence replicator so it goes FROM a scale of 0%. basically I want to GROW all the objects in a random fill.
For me, it doesn't work. It sort of grows the left or right half partially, then stops. This has been messed up for a BUNCH of different projects. Does everyone agree???
If this works for you, do I maybe need to reinstall???

Sorry Adam, but it worked for me.
I created a shape and replicated it. Changed the Shape parameter to Image, and the Arrangement to Random Fill. Put the points up to 18.
Applied the Sequence Replicator. Added Scale to it.
Set the scale to 0, and changed the Sequencing to From.
Changed the Unit Size to All.
This worked. Perhaps you didn't change the Unit Size to All? When set to Object, the replicator seems to act as you posted, unless you crank the spread up. This is not a bug, but rather the way it's designed so you can choose which replicated objects are affected (in case that's what you wanted). Since you wanted to affect all your objects, you must change the Unit Size to All so that the Sequence Replicator affects everything simultaneously.
Andy

Sequence replicator bug : when source image has "colorize"

Similar Messages

Maybe you are looking for