Sequence running slowly...
Hi all,
I'm new to this LabView and TestStand malarky... And our resident guru has now left the Division.
We have two pieces of software written in Labview 7.1 and sequenced in TestStand 3.1. Both pieces of software have been installed on a single workstation with all related jig and tooling. This works correctly and as designed.
The process now needs to be separated to increase production efficency. So one of the pieces of software was installed onto a new workstation. The process seems to run considerably slower though on this new workstation. Why is this?
I have tried a few possible solutions including completely installing the same software onto a new workstation with the same results.
I have compiled the sequence into an install file with a few different options selected, but to be honest I'm not entirely sure what I should be changing?
Is there anything in TestStand that sets a certain sampling rate? Or how fast each VI is executed?
A few of the problems have been overcome by changing timebases on the graphs which has resulted in a faster trace along the X axis to match the current production jig.
Any help'd be much appreciated!
Chris.
Hi Chris,
One difference, do have Tracing enabled on you old systems, i.e. do you see in the SeqEditor or Operator Interface each step being displayed as it executes.
and therefore do you have the same settings on the new system.
Regards
Ray Farmer
Regards
Ray Farmer
Similar Messages
-
Error: Adobe Flash Player 9 run slowly!
Hi folks,
I am working since a long time on a big model. Now I am nearly complete but something is going wrong after deploying into the portal.
Compiling and deploying works fine. But when I start to run my application, the program is getting aborted with following error pop-up: "A script in this movie is causing Adobe Flash Player 9 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?". After this error message, I have to click yes, since nothing responses anymore when I don't do so.
I am calling a huge number of Bapis in my model. When I delete one of the last called Bapi in the model sequence the above described problem doesn't occur anymore. But I need all Bapis in the model!
Do I have the chance to attach my model somewhere to give you the chance to have a look at it? Maybe it would be much easier then to solve the problem.
I am looking forward to here from you.
Thank you very much.
Aylin.Hi Marcel, hi Benni,
first of all thank you for your answers.
I have uploaded the exported model, which you can download following this link:
Maybe, to answer the question of Benni, some description of my model:
I am working with 3 layers, which are parts of a wizard.
In the first layer you can select between 3 entries in a drop-down-box and jump to the next layer with pushing the button "next". Depending on which entry you have choosen from the drop down box, you will be shown one of the 3 form views in the second layer (I worked here with a store element and visibility condition).
In the second layer now, you can choose several entries clicking the clickboxes. Clicking the button "next" you will jump to the next layer.
Here is a value help to search for customers (ERP-Customer Table). After you have choosen a customer, Project Number and Project Description for 2 projects will be entered.
After clicking the submit button the main process starts in the backend:
A cprojects template will be copied and changed regarding to the entered project data. This will be done for 2 projects in parallel. Next step ist to read out of a table the corresponding internal order from the first project and use it as input to create an Sales Order. In parallel also the Internal Order of the second project will be searched. After the Sales Order is created with the Internal Order of the first project, the second Internal Order will be used as input to change the existing Sales Order. Depending on if the "Data Conversion" component in the second layer is clicked, als an Purchase Order will be created (worked with a condition here).
The 2 form views are the output of the steps described (2 projects, Internal Orders and Purchase Order).
Since I have to create the project structure depending on which components have been checked in the second layer, I am working that way, that I am using a project structure where all components are in it. Depending on which components have been selected, I am deleting the ones, which have been not selected from the existing Project (I am doing this only for the first Project). Therefore I have to load the Project Definition of the Project (condition), I have to load the Project Phases which contain tasks to delete (i.e. when "Data Conversion" is not clicked, Project Phase 3 has to be loaded, since this component as a task under Project Phase 3. I worked also with conditions here). Then I have to delete the appropriate task (condition). Since the Bapis do not have a commit part in them, I have also to run commit Bapis to submit the changes into the backend (cProjects Commit Work).
To come back to Benni's question, if the last Bapis are working: Yes, they do. The same model worked on Thursday evening. And now, I always get the same error message. I do not really know, how to work with this timer. Can you give me advice?
I don't know, if you have access to our systems. But if you need test data to run the model, let me know.
Thank you very much.
Aylin.
<a href="https://sapmats-de.sap-ag.de/download/download.cgi?id=X5LDIBPJBA1KHA87IGX1UODP7P934R17SYAIQU2MVSKI6Q85TB">VC Model</a> -
My computer is running slowly and slowly
my computer is running slowly and slowly and the sound of fan becomes louder and louder .I suspect my computer get infected by virus
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/ { n++;print;} END { if(n<185) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<185) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Dear all,
Our DB Instance always run very slowly and update process
responding time is very long during month end.
I think this maybe due to it runs the database and application.
So I want to delete the DB Instance from Logon Group, and then users
will just access other else three Dialog Instances, is it Ok or what
impact will have ?
How to check PI system connected to SAP ECC Logon Group's IP , but not only
connected to the DB Instance ?
Users always need run many Background Jobs at the day,but I heard other
company almost only allow users run Background Jobs at the night.
Generally, how many background jobs running on one Instance is normal?
Do we have any good ways to control or limit users' background job
setting at the day ?
The dialog and update process numbers of DB Instance are respectively 80 and 6(Update & Update2) , other Dialog Instance is 50:4(Batch:Update)
How is the general ratio between dialog and update process numbers ?
what's the difference between update and update2 process ?
Thanks,
MichaelHi Michael,
Your company basis team searching why SAP system run slowly.
But don't have your company basis team check your system transactions.
ST01 - Operating system monitor
ST02 - Tune Summary
ST04 - SQL Server performance analysis
SM21 - System Log
SM50 - Process Overview
SM13 - Update Requests.
SM12 - Lock Entries
Maybe long time background working process see u overview tcode SM50 and SM12 kill procees after system speed normaly.
Regards.
Cem ATES -
I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly. I will have to keep a few apps such as CrossWeb and Veraport due to having to use secure banking and government websites in Korea. I also need the LogMeIn app to access a server in the USA, but I realise that some people recommend getting rid of it.
I tried but apparently have been unsuccessful in removing a McAfee VirusScan application completely. I can still see some files in the HD Library. Any ideas here on how to safely uninstall/remove?
Also any suggestions on how to get rid of my incompatible virtualbox? I think it's 4.0.4.
Also, if you see anything else I should uninstall/remove from the EtreCheck below, by all means please make suggestions.
Thanks so much for your help, suggestions, and advice!
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.53 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 1:55:49
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (295.55 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.cisco.cscotun (1.0) Support
[kext loaded] com.logmein.hamachi (1.0) Support
[kext loaded] org.virtualbox.kext.VBoxDrv (4.0.4) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.0.4) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.0.4) Support
[kext loaded] org.virtualbox.kext.VBoxUSB (4.0.4) Support
Startup Items:
KeyAccess: Path: /Library/StartupItems/KeyAccess
VirtualBox: Path: /Library/StartupItems/VirtualBox
Launch Daemons:
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.logmein.hamachi.plist Support
[running] com.sassafras.KeyAccess.plist Support
[loaded] com.tunnelbear.mac.tbeard.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.logmein.hamachimb.plist Support
[loaded] com.sassafras.KeyAccess.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[running] com.spotify.webhelper.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
GrowlHelperApp
GrowlHelperApp
iTunesHelper
SuperDrive Update 2.1
Google Drive
Dropbox
DaumLiveAgent
KeyAccess
Internet Plug-ins:
npCrossWebPlugin: Version: 1.0 - SDK 10.5 Support
o1dbrowserplugin: Version: 5.3.1.18536 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.1.4 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
RealPlayer Plugin: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.3.1.18536 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
Veraport: Version: 1.1.0.2 - SDK 10.7 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
KeyAccess Support
Symantec\nQuickMenu Support
Time Machine:
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 189.71 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 30
Oldest backup: 2012-08-12 07:49:57 +0000
Last backup: 2014-05-05 04:48:48 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
3% WindowServer
0% fontd
0% PluginProcess
0% Google Drive
0% com.apple.WebKit.Networking
Top Processes by Memory:
188 MB com.apple.IconServicesAgent
143 MB Finder
143 MB mds_stores
102 MB Safari
98 MB WindowServer
Virtual Memory Information:
53 MB Free RAM
1.55 GB Active RAM
1.50 GB Inactive RAM
787 MB Wired RAM
537 MB Page-ins
316 KB Page-outsYou have so much junk, and I doubt that you know how to uninstall it.
It's up to you what you do, I know what I would do (but then I wouldn't stuff my Mac with junk in the first place)
Good luck. -
ITunes 10.2.1(1) runs slowly when left running for extended time
iTunes on my Mac runs slowly the longer it is left up. I have two AppleTV's (ver 2), and if iTunes has been up for more than a day, it can take minutes for the list of movies/tv shows to appear on the AppleTV. Likewise, iTunes itself becomes very sluggish, unable to access the iTunes store or sync ipod/iphones.
it was a plugin i had that was causeing it: DockArtPlugin.bundle
-
What can I do to my MacBookPro to stop running slowly?
My MacBookPro runs slowly. I found out that kernel_task takes a lot of memory space. What can I do to make it run faster?
I used etrecheck to scan and came up with the below scan result;
Problem description:
My MacBookPro is running slowly and on checking the activity monitor, I found that the kernel_task is taking most of the memory.
EtreCheck version: 2.1.1 (104)
Report generated December 10, 2014 at 19:48:10 GMT+1
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 2:9:24
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Machintosh HD (disk0s2) / : 499.25 GB (455.42 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Chrome UNKNOWN (missing value)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.0.0 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
User internet Plug-ins: ℹ️
iGetter Plugin: Version: 2.9.2 [Support]
iGetterScriptablePlugin: Version: 2.9.2 [Support]
Safari Extensions: ℹ️
iGetter Extension
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Auto backup: YES
Destinations:
Time Machine Backups [Local]
Total size: 499.76 GB
Total number of backups: 1
Oldest backup: 2014-12-06 17:03:58 +0000
Last backup: 2014-12-06 17:03:58 +0000
Size of backup disk: Excellent
Backup size 499.76 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
10% WindowServer
9% Google Chrome
4% Activity Monitor
2% hidd
1% sysmond
Top Processes by Memory: ℹ️
198 MB Google Chrome
94 MB mds_stores
90 MB ocspd
73 MB WindowServer
69 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
538 MB Free RAM
2.12 GB Active RAM
975 MB Inactive RAM
663 MB Wired RAM
988 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 10, 2014, 05:39:22 PM Self test - passedYour Virtual Memory page-outs indicate your RAM is not stressed under the conditions during which the test ran.
Your greater issue is the Trusteer software. Banks recommend it knowing nothing of Macs and that Macs do not run properly with Trusteer. Uninstall instructions here:
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x -
My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?
Problem description:
slow computer
EtreCheck version: 2.0.11 (98)
Report generated November 15, 2014 2:57:16 PM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 384 MB
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 6 days 7:45:47
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (25.67 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Rowmote Helper.app
[loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.smarttech.iokit.SMARTBoard (11) Support
[not loaded] com.tectona.driver.PL2303 (1.3.0) Support
[loaded] com.webroot.driver.WebrootSecureAnywhere (54 - SDK 10.7) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.smarttech.boardservice.plist Support
[running] com.smarttech.floatingtools.plist Support
[running] com.smarttech.ink.plist Support
[running] com.smarttech.SBWDKService.plist Support
[running] com.smarttech.smartnotification.plist Support
[running] com.smarttech.systemtrayicon.plist Support
[running] com.webroot.WRMacApp.plist Support
[running] com.webroot.WRMacBackNSync.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.regularrateandrhythm.rowmotehelperaide.plist Support
[running] com.webroot.security.mac.plist Support
[running] com.webroot.webfilter.mac.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service UNKNOWN (missing value)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify Application (/Applications/Spotify.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Rowmote Helper Application (/Applications/Rowmote Helper.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
npwebroot: Version: 2.0.15 Support
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Safari Extensions: ℹ️
Password Manager
webfilter
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
SMART Board Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
2% iPhoto
2% mds
2% mdworker
1% Google Chrome
Top Processes by Memory: ℹ️
382 MB Mail
275 MB WebProcess
107 MB Google Chrome
103 MB WindowServer
99 MB Google Chrome Helper
Virtual Memory Information: ℹ️
270 MB Free RAM
1.50 GB Active RAM
1.30 GB Inactive RAM
1.22 GB Wired RAM
20.97 GB Page-ins
8.64 GB Page-outsHi Linc
I hope this is what you were after. Looking forward to hearing your feedback.
Thanks, Susanna.
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b606ce0> { count = 2, contents =
"query" => <string: 0x7fbb9b605720> { length = 109, contents = "com_apple_ats_name_postscript == "Roboto-Regular" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d950> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 108, contents = "com_apple_ats_name_postscript == "Roboto-Medium" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b102580> { count = 2, contents =
"query" => <string: 0x7fbb9b100580> { length = 107, contents = "com_apple_ats_name_postscript == "Roboto-Light" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d1d0> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 106, contents = "com_apple_ats_name_postscript == "Roboto-Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91723 [cfprefsd]
11/16/14 12:36:03.784 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91721]) Exited: Killed: 9
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91721 [SleepServicesD]
11/16/14 12:36:08.471 PM com.apple.launchd.peruser.501[159]: (com.apple.tccd[91730]) Exited: Killed: 9
11/16/14 12:36:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91730 [tccd]
11/16/14 12:36:09.592 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[91727]) Exited: Killed: 9
11/16/14 12:36:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91727 [xpcd]
11/16/14 12:36:13.129 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[91728]) Exited: Killed: 9
11/16/14 12:36:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91728 [XType.FontHelper]
11/16/14 12:36:14.996 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91739]) Exited: Killed: 9
11/16/14 12:36:14.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91739 [SleepServicesD]
11/16/14 12:36:20.120 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[76618]) Exited: Killed: 9
11/16/14 12:36:20.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76618 [cfprefsd]
11/16/14 12:36:23.433 PM com.apple.launchd.peruser.501[159]: (com.apple.cfprefsd.xpc.agent[76616]) Exited: Killed: 9
11/16/14 12:36:23.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76616 [cfprefsd]
11/16/14 12:36:26.261 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91752]) Exited: Killed: 9
11/16/14 12:36:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91752 [SleepServicesD]
11/16/14 12:36:37.691 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91764]) Exited: Killed: 9
11/16/14 12:36:38.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91764 [SleepServicesD]
11/16/14 12:36:48.938 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91777]) Exited: Killed: 9
11/16/14 12:36:49.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91777 [SleepServicesD]
11/16/14 12:37:01.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91788 [SleepServicesD]
11/16/14 12:37:00.821 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91788]) Exited: Killed: 9
11/16/14 12:37:04.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91706 [distnoted]
11/16/14 12:37:15.656 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91795]) Exited: Killed: 9
11/16/14 12:37:15.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91795 [SleepServicesD]
11/16/14 12:37:27.016 PM ReportCrash[91819]: Failed to create CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.125 PM ReportCrash[91819]: Failed to create dSYM-less CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.487 PM com.apple.launchd.peruser.501[159]: (com.webroot.WRMacApp[264]) Job appears to have crashed: Segmentation fault: 11
11/16/14 12:37:30.336 PM com.apple.launchd[1]: (WSDaemon[61]) Exited abnormally: Broken pipe: 13
11/16/14 12:37:34.295 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:34.594 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.30 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:37.648 PM ReportCrash[91819]: Saved crash report for Webroot SecureAnywhere[264] version 8.0.7.78 (8.0.7.78) to /Users/landerson/Library/Logs/DiagnosticReports/Webroot SecureAnywhere_2014-11-16-123737_lukes-MacBook-Pro.crash
11/16/14 12:37:42.660 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:43.632 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.97 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:50.783 PM WSDaemon[91822]: CGSRegisterConnectionNotifyProc called with invalid connection
11/16/14 12:38:09.909 PM Problem Reporter[91853]: launch_msg returned m -
My mac is slow, the movies run slowly, the kernel_task consumes 463,3 MB of memory, how can I fix this?
The problem started a few weeks ago with a small decrease in speed, and the videos now crash while the sound remains normal. When I open the Finder or any file it seems that I'm opening the windows with the hourglass spinning. I've already cleaned temporary, removed everything that was saved on the table, I made up for the mountain lion. I have a Mac 27-inch, 3.06 GHz processor Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, ATI Radeon HD 4670 256 MB, Software OS X 10.8. With space on the HD.
Cópia do monitor de atividades
0 kernel_task root 1,1 76 394,5 MB Intel (64 bits)
248 Conteúdo da Internet do Safari silvanalahutte 0,0 9 128,4 MB Intel (64 bits)
282 Mail silvanalahutte 4,4 12 99,2 MB Intel (64 bits)
247 Safari silvanalahutte 0,0 13 68,1 MB Intel (64 bits)
173 Dock silvanalahutte 0,0 3 63,3 MB Intel (64 bits)
35 mds root 0,2 6 61,2 MB Intel (64 bits)
89 WindowServer _windowserver 1,9 5 53,2 MB Intel (64 bits)
252 Flash Player (plug-in de Internet do Safari) silvanalahutte 0,3 6 27,0 MB Intel (64 bits)
275 Monitor de Atividade silvanalahutte 3,0 4 21,1 MB Intel (64 bits)
39 loginwindow silvanalahutte 0,0 2 20,9 MB Intel (64 bits)
60 coreservicesd root 0,0 4 20,3 MB Intel (64 bits)
195 Central de Notificações silvanalahutte 0,0 3 19,6 MB Intel (64 bits)
159 universalaccessd silvanalahutte 0,0 5 19,4 MB Intel (64 bits)
170 SystemUIServer silvanalahutte 0,0 4 19,3 MB Intel (64 bits)
269 mdworker silvanalahutte 0,2 4 17,9 MB Intel (64 bits)
174 Finder silvanalahutte 0,0 4 16,0 MB Intel (64 bits)
222 com.apple.dock.extra silvanalahutte 0,0 2 14,4 MB Intel (64 bits)
203 CalendarAgent silvanalahutte 0,0 4 13,4 MB Intel (64 bits)
251 com.apple.iCloudHelper silvanalahutte 0,0 7 12,2 MB Intel (64 bits)
32 opendirectoryd root 0,0 8 10,0 MB Intel (64 bits)
211 Extensão Captura de Imagem silvanalahutte 0,0 3 9,4 MB Intel (64 bits)
296 com.apple.NotesMigratorService silvanalahutte 0,0 2 9,4 MB Intel (64 bits)
188 HPScanner silvanalahutte 0,0 3 9,4 MB Intel (64 bits)
190 UserEventAgent silvanalahutte 0,0 3 8,3 MB Intel (64 bits)
15 securityd root 0,0 4 8,2 MB Intel (64 bits)
258 AppleSpell.service silvanalahutte 0,0 2 8,0 MB Intel (64 bits)
56 apsd root 0,0 4 7,2 MB Intel (64 bits)
103 aosnotifyd root 0,0 4 7,2 MB Intel (64 bits)
40 locationd _locationd 0,0 7 7,2 MB Intel (64 bits)
137 coreaudiod _coreaudiod 0,0 4 7,1 MB Intel (64 bits)
274 Quick Look Helper silvanalahutte 0,0 5 7,0 MB Intel (64 bits)
126 named root 0,0 1 7,0 MB Intel (64 bits)
172 talagent silvanalahutte 0,0 2 6,9 MB Intel (64 bits)
215 CIJScannerRegister silvanalahutte 0,0 6 6,1 MB Intel (64 bits)
216 xpcd silvanalahutte 0,0 2 5,8 MB Intel (64 bits)
305 mdworker _spotlight 0,0 3 5,3 MB Intel (64 bits)
212 accountsd silvanalahutte 0,0 2 5,1 MB Intel (64 bits)
105 ocspd root 0,0 4 4,9 MB Intel (64 bits)
199 imagent silvanalahutte 0,0 3 4,6 MB Intel (64 bits)
180 xpcd _coreaudiod 0,0 2 4,4 MB Intel (64 bits)
165 fontd silvanalahutte 0,0 2 4,2 MB Intel (64 bits)
183 com.apple.audio.SandboxHelper _coreaudiod 0,0 2 4,2 MB Intel (64 bits)
295 com.apple.hiservices-xpcservice silvanalahutte 0,0 2 4,1 MB Intel (64 bits)
13 taskgated root 0,0 4 4,0 MB Intel (64 bits)
18 configd root 0,0 7 4,0 MB Intel (64 bits)
12 kextd root 0,0 2 3,9 MB Intel (64 bits)
11 UserEventAgent root 0,0 3 3,8 MB Intel (64 bits)
104 socketfilterfw root 0,0 3 3,3 MB Intel (64 bits)
189 usernoted silvanalahutte 0,0 2 3,3 MB Intel (64 bits)
300 CVMCompiler silvanalahutte 0,0 2 3,2 MB Intel (64 bits)
106 rpcsvchost root 0,0 16 2,8 MB Intel (64 bits)
36 mDNSResponder _mdnsresponder 0,0 3 2,8 MB Intel (64 bits)
45 fseventsd root 0,0 63 2,7 MB Intel (64 bits)
123 wifid root 0,0 2 2,7 MB Intel (64 bits)
285 lsboxd silvanalahutte 0,0 2 2,6 MB Intel (64 bits)
50 appleeventsd _eppc 0,0 2 2,6 MB Intel (64 bits)
246 pbs silvanalahutte 0,0 2 2,6 MB Intel (64 bits)
29 revisiond root 0,0 4 2,6 MB Intel (64 bits)
23 usbmuxd _usbmuxd 0,0 3 2,5 MB Intel (64 bits)
187 NetworkBrowserAgent silvanalahutte 0,0 3 2,5 MB Intel (64 bits)
42 InternetSharing root 0,0 8 2,3 MB Intel (64 bits)
73 netbiosd _netbios 0,0 3 2,2 MB Intel (64 bits)
200 helpd silvanalahutte 0,0 2 2,1 MB Intel (64 bits)
186 filecoordinationd root 0,0 2 2,0 MB Intel (64 bits)
202 AppleIDAuthAgent silvanalahutte 0,0 3 2,0 MB Intel (64 bits)
57 distnoted root 0,0 2 2,0 MB Intel (64 bits)
241 printtool silvanalahutte 0,0 2 1,9 MB Intel (64 bits)
220 AirPort Base Station Agent silvanalahutte 0,0 4 1,8 MB Intel (64 bits)
55 autofsd root 0,0 2 1,8 MB Intel (64 bits)
138 logind root 0,0 2 1,7 MB Intel (64 bits)
49 dpd root 0,0 2 1,7 MB Intel (64 bits)
1 launchd root 0,0 3 1,6 MB Intel (64 bits)
44 hidd root 0,3 3 1,6 MB Intel (64 bits)
27 SleepServicesD root 0,0 2 1,6 MB Intel (64 bits)
127 bootpd root 0,0 1 1,6 MB Intel (64 bits)
160 cfprefsd silvanalahutte 0,0 4 1,6 MB Intel (64 bits)
93 CVMServer root 0,0 2 1,6 MB Intel (64 bits)
30 ptmd root 0,0 2 1,5 MB Intel (64 bits)
16 diskarbitrationd root 0,0 2 1,5 MB Intel (64 bits)
63 cfprefsd root 0,0 4 1,4 MB Intel (64 bits)
14 notifyd root 0,0 3 1,4 MB Intel (64 bits)
267 distnoted _spotlight 0,0 2 1,4 MB Intel (64 bits)
155 launchd silvanalahutte 0,0 2 1,4 MB Intel (64 bits)
99 ntpd root 0,0 2 1,3 MB Intel (64 bits)
276 activitymonitord root 0,8 1 1,3 MB Intel (64 bits)
19 syslogd root 0,0 5 1,3 MB Intel (64 bits)
26 stackshot root 0,0 3 1,1 MB Intel (64 bits)
90 networkd _networkd 0,0 2 1,0 MB Intel (64 bits)
41 KernelEventAgent root 0,0 3 996 KB Intel (64 bits)
268 cfprefsd _spotlight 0,0 2 988 KB Intel (64 bits)
182 cfprefsd _windowserver 0,0 2 960 KB Intel (64 bits)
128 natpmpd root 0,0 1 936 KB Intel (64 bits)
301 WebKitPluginAgent silvanalahutte 0,0 2 932 KB Intel (64 bits)
166 pboard silvanalahutte 0,0 1 932 KB Intel (64 bits)
179 launchd _windowserver 0,0 2 808 KB Intel (64 bits)
264 launchd _spotlight 0,0 2 804 KB Intel (64 bits)With space on the HD.
Depends on how much free space.
Right or control click the MacintoshHD icon on your Desktop.
Click Get Info. In the Get Info window you will see Capacity and Available.
Make sure there's a minimum of 15% free disk space. -
We have had a production issue crop up twice now where reports begin running slowly seemingly at random.
When this happens we can see from running SQL Profiler that the report queries are taking an extremely long time to execute. The same queries when run directly in management studio run quickly.
Initially I suspected parameter sniffing, and tried using OPTION (RECOMPILE) in the reports, as well as clearing out the particular query from the plan cache and running the SQL in SSMS to try and get a better plan etc but no amount of jiggery pokery by
me could get the queries to run any faster.
The really weird thing - is that stopping and starting the report server via the reporting services configuration manager instantly cures the problem.
I'd really love to know - why this might be? Is it something to do with the report server closing and re-opening its connections to the database? That's the only sort of thing I can think of...any ideas? Anyone? Any suggestions would be much appreciated.
LucasFHi LucasF,
In your scenario, usually we can monitor the execution log in Report Database. If you run below query, you can get the results how long the report takes to render (TimeRendering), how long to process the report(TimeProcessing) and how long to retrieve data
from Database(TimeData). You can check the starttime and endtime to know the total time for executing a report.
SELECT TOP1000 *FROM[ReportServer].[dbo].[ExecutionLog2]
More details information, please reference to similar thread below:
Steps for troubleshooting a slow SSRS 2014 server
Troubleshooting Reports: Report Performance
In SQL Server Reporting Services, a job will be created by SQL Server Agent if any of the following processes is underway:
query execution on a remote or local database server
report processing
report rendering
To cancel a job that is running on the report server, we can cancel the job directly or reduce the report execution time-out value in the SQL Server Management Studio and then will stop query execution. Please refer to the steps below:
Open SQL Server Management Studio, and connect to "Reporting Services".
Under the Report Server node, right-click on the "Jobs" folder and select "Refresh". Then, right-click on "Jobs" again and click "Cancel All Jobs".
Right-click on the Report Server node and open the "Server Properties" dialog.
Click the "Execution" option, and set the "Limit report execution to the following number of seconds:" to a much smaller number. After this issue is resolved, this configuration should revert to the previous state.
Reference:
Managing a Running Process
Setting Time-out Values for Report and Shared Dataset Processing
In addition, we can also use the KILL Transact-SQL statement to terminate a normal connection by terminating the transactions that are associated with the specified session ID. For the details information, you can refer to:
KILL (Transact-SQL)
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.
Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it? -
PDF error A script in this movie is causing Adobe Flash Player 10 to run slowly.
When opening a PDF of a website using Acrobat 9.0 Professional, I am recieiving the following notification.
A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run, you computer may become unresponsive. Do you want to abort the script?
The error does not occur when viewing the live website from which the PDF was made.
I recieve the same error when trying to open the PDF on other PCs using Adobe Reader 9.
I have updated the flash player on each of the PCs as well.
I am wondering if anyone has any ideas or insight regarding why I am recieving this notification.
Thank youI'm suddenly getting the same error message, on a variety of web sites. I'm running Windows Vista on a fairly high-end desktop, and I haven't added any new software lately. This just started up out of nowhere. When searching for this error message on the web, people are asking this same question all over the place, and no one has an answer. Does Adobe ever monitor these forums?
-
Mac Mini late 2012 running slowly
Mac Mini (Late 2012) is running slowly. How can I speed it up?
Problem description:
Mac Mini (Late 2012 is slow running. How do I speed it up?
EtreCheck version: 2.0.11 (98)
Report generated 15 November 2014 16:50:57 GMT
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
HP 23xi spdisplays_1080p
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 8:1:36
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (438.30 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Brother DCP-J4110DW
MediaTek Inc MT1806
MediaTek Inc MT1806
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist Support
[running] com.mcafee.menulet.plist Support
[running] com.mcafee.reporter.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Knowhow Cloud UNKNOWN (missing value)
Knowhow Cloud Application (/Applications/Knowhow Cloud.app/Contents/Resources/Knowhow Cloud.app)
Internet Plug-ins: ℹ️
SiteAdvisor: Version: 2.0 - SDK 10.1 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
SiteAdvisor
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
11% WindowServer
5% com.apple.WebKit.WebContent
0% fontd
0% USBserver
0% Microsoft Excel
Top Processes by Memory: ℹ️
348 MB com.apple.WebKit.WebContent
123 MB Knowhow Cloud
112 MB Finder
107 MB Safari
103 MB Microsoft Excel
Virtual Memory Information: ℹ️
103 MB Free RAM
1.89 GB Active RAM
1.60 GB Inactive RAM
689 MB Wired RAM
3.14 GB Page-ins
1 MB Page-outs -
Firefox 3.6.3 runs slowly and hangs
Recently I started having an issue with Firefox running slowly. I upgraded to version 3.6.3 hoping this would fix the problem but it did not. I tried this suggestion from CNet - http://forums.cnet.com/5208-6136_102-0.html?threadID=242416, which seemed to help at first, but then I started having the problem again so I un-did everything suggested in the CNet link. Now in addition to Firefox running slowly (pages load slowly and it is also very slow to scroll up and down), I am having problems with it hanging when I try to move windows. For example, I play games on Pogo.com which open in a new window. When the window opens, if I click at the top of the window and try and move it to a different location on the screen, Firefox completely hangs. At first I thought maybe something was wrong with my Java, but Firefox also does this if I open Tools->Options and try to move that window. I read the "Firefox Hangs" article and the suggestions either didn't apply, or didn't work. I've disabled all my plugins and add-ons and that doesn't fix the problem. I know there is nothing wrong with my internet connection or my computer because everything works fine in Internet Explorer. Any help would be greatly appreciated as I really don't want to have to go back to IE.
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)My Firefox hangs I am using windows 7 and the CPU meter runs rightup into the red when I open a page and it also hangs I also get other programmes not responding (mainly Adobe stuff) not sure if this is because these programmes connect to the web when you open them . if I cant fix this I may try I E 8 but have not used internet explorer for years so dont really want to change
-
Macbook Pro 2.8 Intel, 4 GB 10.7.4 running slowly both on and off internet. Are the "Clean up your Mac" ads legitimate?Should I try it?
no dont do that,
Keep well away from mackeeper
Hopefully you have not installed any yet but take a look here about mackeeper
http://applehelpwriter.wordpress.com/2011/09/21/how-to-uninstall-mackeeper-malwa re/
Take a look at mac 101 and enter search for running slowly
http://www.apple.com/support/mac101/
http://www.whyismymacrunningslow.net/
some very good answers here in this discussion by forum members
https://discussions.apple.com/thread/3990642?start=0&tstart=0
Maybe you are looking for
-
I am trying to use the Home Sharing capabilities on my MacBook and my sister's HP Envy. I have turned Home Sharing both On and Off via Advance in the drop down from the top menu. When I turn Home Sharing Off then back On, it asks me for the Apple ID
-
Installing New OS on New Hard Drive
My daughter somehow killed the hard drive on her iMac G5 + iSight and, with considerable difficulty, I managed to crack the case and install a new hard drive. She didn't have her original mac disks, so I used the discs that came with my Macbook Pro (
-
Question about Note 870814.1 - Backing up EM Database Control Data
Quick question -- why would you want to downgrade OEMDC after upgrading to 11gR2? "After upgrading to Oracle Database 11g release 2(11.2), if you want to downgrade Oracle Enterprise Manager Database Control you must save your Database Control files a
-
Dear Team, When I am trying to create a relationship to Position (S) or (C) Job, receiving a message as "There is no time constraint for S 1001". Unable to locate the exact error location in the customization. Could anyone know how to solve this. Not
-
EP7.0 BI7 Report Export to excel - unable to read file
Hello we have a EP7.0 portal that calls a BI7.0 BW report. Once the report is displayed and we select "export to excel" a pop up comes up and if we select "open" it calls MS Excel but then a pop up shows inside excel - "unable to read file". This als