Sequence settings for importing DVD material

Hi there!
I am about to start a new project that will be shown at a convention on a big screen via projector.
Basically, I have recieved DVD's from around the world that I am supposed to edit into a montage. So far I have been opening them using MPEG streamclip and converting them into Quicktime Files.
Can anyone recommend the best possible Sequence settings to use as well as what Frame Size and Compressor to use when exporting from MPEg streamclip to FCP?
Thanks

use the sequence easy set-up for dv-pal (sweden is pal, yes?)
export your clips from streamclip using dv-pal as the type for PAL dvds.
for ntsc dvds, you need to pull the clips off as ntsc dv/dvcpro then using the advanced section of compressor, convert them to dv-pal.
mix by stirring lightly, put into a greased pan and place in a 350 degree oven for 30 minutes or until golden brown.
x

Similar Messages

  • Proper sequence settings for importing Canon Rebel T2i footage

    Greetings, all. I searched the forum and didn't find this question answered elsewhere, so I thought I'd ask.
    I'm using Adobe Premiere Pro CS4, version 4.2.1, and I'm trying to find the ideal sequence settings for the Canon Rebel T2i, which records in MPEG-4 AVC/H.264, with adjustable frame rate. I am running on Apple Mac OSX 10.8.2.
    I've been editing with this footage for over a year now, and it's always been a struggle because I have to render all footage before I can even play it in Premiere. When first imported, the render bar above the timeline is yellow.
    I'd like to see if I'm doing this incorrectly; to know if I have a simple sequence setting that's incorrect. What sequence settings should I use for my imported footage to start out green and not require a lengty render for video that isn't even edited yet?
    Thank you,
    -Matt

    >When first imported, the render bar above the timeline is yellow
    I think this is written for CS5, but the concept should be the same
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html

  • Best sequence settings for imported video

    I created a simple screencast of a powerpoint slideshow with another piece of software, and exported it as .mov (H264). The screencast was created at 25 FPS with no audio.
    When I import it to Premiere CS5, the video quality is pretty bad. I can't read someo the smaller letters on the slides, and when the slides are static, the graphics on them pulsate. Bottom line is, I need the quality to be better.
    I think the problem might be that I am not matching my sequence settings to fit the imported file. When I create a new sequence, there are dozens of different presets, and I have no idea which one is the best one.
    The reason I want import to Premiere is so I can add audio...etc., and export, and upload to Youtube, burn to cd...etc. But, I want the quality to be good, and it is quite simply...terrible.
    Any help would appreciated.

    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666

  • Sequence settings for PAL DVD output

    G'day,
    I'm cutting my sister's wedding video.  I have footage from 2 cameras - a Panasonic TM900 (1920x1080p50) and a Canon MVX430 (miniDV SD PAL "widescreen").
    The intended media is DVD.  I am using Final Cut Pro, and DVD Studio Pro.
    I've read that I should use a PAL CCIR 601 5:4 720x576 frame size, with PAL CCIR 601 pixels in order to achive widescreen DVD playback.
    And this seems right, as when I drag the HD and SD footage to the sequence, they both maintain their 16:9 ratios - with black borders top and bottom.
    However once I start playing around with the footage... zooming in (ie increasing the scale in the Motion tab), or if I re-centre the footage, moving it around the frame, those borders move around or are completely lost.
    Previously for this problem I have just used the crop function (with key frames as required) in the Motion tab, but that can get very painful.
    Am I using the wrong work flow here?  Should I be using an actual 16:9 frame from the start, instead of the 5:4 with borders? 
    Is there an easier way to maintain the borders?
    Hope this makes sense... 
    For the record, I do have some understanding of what I'm doing, just was only taught what I needed to complete the projects I worked on at Uni, so don't have a full understanding of all of the complexities involved...
    Thankyou
    cosmic

    >Should I be using an actual 16:9 frame from the start, instead of the 5:4 with borders?
    Yes. Make your Sequence DVPAL anamorphic.
    >Is there an easier way to maintain the borders?
    Why do you want borders? On a 16:9 TV the screen will be filled. You will only see the borders on a 4:3 set.

  • I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing".  Can anyone help with this?

    I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing".  Can anyone help with this?

    It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

  • What are the best imovie, mpeg4 settings for making dvds?

    What are the best imovie, mpeg4 settings for making dvds?

    • iMovie'08 to 11
    - Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
    iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
    iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
    • DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
    • iDVD does only care about TIME / Duration as
    iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    • iDVD Does Region = Zero (to be played everywhere)
    • Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
    If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
    One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
    I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
    • NTSC - US etc
    • PAL - EU etc
    Yours Bengt W

  • Best Settings for Exporting DVD Footage in a Movie File

    Hello,
    I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
    I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
    Here's an example of what I did recently with my own settings:
    http://www.youtube.com/watch?v=qFV4sT7rHGs
    I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
    So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
    Thanks!

    First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
    Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
    Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

  • Sequence settings for HD

    what are the exact sequence settings for cutting 1080i60 footage in FCP? From my understanding; it's 1920 X 1080 with 59.94fps. But what fields should render first; upper or lower? I also need to know this info for using After Effects; I need to know the specifications so I can render my animations.
    If there is anything else I should know, please let me know. thanks.

    Open your preset in FCP or check your sequence settings and all that information will be there.

  • Sequence settings for 16:9

    Hi,
    Just doing some PAL tests of 16:9 HD to 16:9 SD downconvert.
    What are the sequence settings for this?
    If I use the normal DV PAL 48khz, the VIEWER window shows a normal 16:0 ratio, but the CANVAS window shows a letterboxed 4:3 window. When I export this project, I get a letterboxed 4:3.
    If I need to give my European client a 16:9 SD project, what are the sequence settings.
    Thank you kindly!

    Thanks Michael,
    I still get images in FCP and QT exports that are letterboxed. Is that normal? I guess I assumed 16:9 FCP project windows and QT export movies would be all image and no letterbox within a 4:3 window.

  • Best settings for older dvd players

    anyone have any recommendations on bit rate or other compression settings for older dvd players? everything i produce plays fine on my personal dvd player that actually says dvd-r on the front, but i continuously have problems with clients players having pixel issues of freezing up. i've tried lower bit rates and such but i'd rather not go into all the different angles and just see what you guys say.
    I can't be the only person out there that has clients with cheapo players!
    thanks in advance.

    I don't think you are going to find a single solution to this problem. Just about every DVD player is going to have problems with some brands or types of recordable DVDs. Some things to consider or try:
    1.) Educate your customers about potential DVD media problems. Potentially tricky since not everyone will freely admit or accept that such problems exist.
    2.) Burn the DVD at the lowest possible rate (burn at 1X rather than 4X, etc.).
    3.) Try a different brand of DVD-R.
    4.) In special cases consider using DVD-RW rather than DVD-R (some older players will actually work better with DVD-RW).
    5.) Consider using the best possible DVD recorder (I'd recommend Plextor drives mated with Roxio's Toast software).
    6.) Use a commercial DVD mastering service (only practical if you want to duplicate several hundred discs -- too costly for small runs).

  • Sequence A/V settings for imported still images

    I want to create a HD DVD containing a slideshow of still images with some transitions, title and ending pages and sound.
    Question: What A/V Sequence settings do I need to choose for a PAL 1920x1080 25fps output?
    Background:
    Till now I've done the editing in iMovie HD 5.0.2. My journey ends with a QT export to a HD-mov file (1920x1080@30fps) which I am not able to author in the same quality with iDVD 5.0.1.
    Since I can not purchase DVD Studio Pro as a separate package, I have lavished myself with the full FCP box
    Now having the most advance tools I feel somewhat swamped in the number of formats & options.
    I want to use FCP as editor and DVDSP as authoring program.
    My workflow goal is to do all the editing in HD and in the authoring fase create a HD master and as SD copy for non HD-DVD-player-owners.
    Experiences so far:
    1) iMovie HD can output a 1920x1080@30fps mov file. iDVD in PAL mode! converts this file to a NTSC image of 720x480 with an aspect ratio of 4:30. So much for all the creativity in iMovie HD.
    2) Files created in FCP 5.1 using various 1080i50 Sequences all having the HDV 1080i50 Compressor, all give 4:3 results in iDVD
    2a) Frame: 1920x1080
    Aspect ratio: HDTV 1080i (16:9)
    Pixel Aspect Ratio: Square
    Compressor HDV 1080i50
    QT display: correct width display
    2b) Frame: 1440x1080
    Aspect ratio: HD (1440x1080) (16:9)
    Pixel Aspect Ratio: HD (1440x1080)
    Compressor HDV 1080i50
    QT display: picture strechted in width
    2c) Frame: 1440x1080
    Aspect ratio: HD (1440x1080) (16:9)
    Pixel Aspect Ratio: Square
    Compressor HDV 1080i50
    QT display: picture narrowed in width
    So what is the magic A/V sequence?
    All hints and tips welcome
    Regards
    Coen
    PowerMac G5 DP 2.0GHz   Mac OS X (10.4.7)   1.5Gb memory, 23" WXGA screen, 460Gb storage

    Patrick & Shane,
    thanks for both your inputs.
    Both, I believe, need to be told that your clip is 16:9 -
    not sure how to do this in iDVD HD, but it's an
    inspector checkbox in DVDSP...
    Guess the common demeanor is that I can set my A/V settings to 1920x1080, but that I need to tell DVDSP that the source material is 16:9.
    In iDDVD there is no such option ... but the funny thing is that my 16:9 output from iMovie HD did display in the correct aspect ratio in iDVD and my 16:9 output from FCP did produce a 4:3 aspect ratio in iDVD (ahum).
    You might try the DVCPRO HD 1080i50 codec. Compressed
    HD, but not too bad. And the drive requirements aren't
    too high. Firewire 800 or internal SATA drive will do
    you. As will a SATA Raid.
    Not sure what difference it makes when using either HDV 1080i50 or DVCPRO HD 1080i50 codec ... when I do not intend to output back to tape.
    In my case I believe (but correct me if I am wrong) the output codec is of lesser importance, since I want to author to HD DVD and HD DVD has its own specific coding specs.
    Not many HD DVD players out there....and those are
    EXPENSIVE...plus there are competing formats. How do you
    intend to exhibit this DVD?
    Initially I will exhibit my HD DVD on my G5. For "common folks" I will re-author in SD (unfortunately Hybrid red laser discs with both a HD and SD project are no longer supported).
    I do believe HD DVD players will standardise and become more common ... so my original HD editing will not be in vain. Part of the fun is to use the FCP tools in a challenging (and rewarding) way.
    What drives me: Last year my wife and I went on a holiday to Spitsbergen. That is half way between the North Pole and Norway. With a sailing boat we circumvented the archipello. I shot 15Gb of RAW images. The environment has left such an impression that I want to create a superb quality slideshow attesting to the uniqueness of the location. This asks for HD and nothing less.
    And Yes, an HD DVD player will cost a lot, but so does a trip to Spitsbergen
    Regards,
    Coen
    PowerMac G5 DP 2.0GHz   Mac OS X (10.4.7)   1.5Gb memory, 23" WXGA screen, 460Gb storage

  • Sequence Settings for HD to SD DVD

    I have an HD Camcorder that records to a flash 8 GB memory card. Once I import the files into Final Cut Pro, I need to export using Compressor with the "DVD Best Quality for 90 minutes" option. The problem is that Compressor takes forever. Over 60 hours estimated.
    I've tried changing the sequence settings before I add the footage to the timeline, but no matter which settings I use for the sequence, it still takes over 60 hours to export.
    I've tried matching the video settings with the sequence, and almost any other combination I can think, but there are simply too many "Trial & Error" options to go through.
    Is there a setting(s) for the sequence in Final Cut Pro, that when you export to Compressor it doesn't take that long?
    Any suggestions would be great?
    Thanks.

    David, I'm using a Samsung HMX-H100. An example of the file name is: HDV_001.MP4
    I'm shooting in HD, 1080i. Overall, the length of the footage is about 45 minutes. Sometimes I use an external scratch disk, but I couldn't tell a difference when I was using one and not.
    My sequence settings have been varied. I have let the sequence match the video clip settings, I have changed the sequence settings before I added the footage and then let the sequence settings stay like that.
    In Final Cut Pro in the sequence settings, I've used the default presets, and changed it as well. Since my final goal is to burn an SD DVD, I'm looking for the best sequence settings that will allow for the fastest export from Compressor, and still maintain the HD clarity that the footage was shot with.
    Let me know if you need any more details.
    Thanks.

  • Best sequence settings for editing HD video material from Nikon D3S

    Hello there,
    My quesstion is, what are the best settings in FCP for editing material from the Nikon D3S?
    At this point I had a sequence (automatically generated from FCP) with settings
    Frame Size: 1440X1080 Aspect Ratio (1440X1080) (16:9)
    Pixel Aspect Ratio: HD 1440 X 1080
    Field Dominance Upper (Odd)
    Editing Timebase: 25
    QuickTime Video Settings
    Compressor: HDV 1080i50
    Now, when I place a video clip form the D3S into the timeline, in the preview screen it does not fill the frame. I have to grab the corners and pull it to fill the gaps.
    I opened the same video clip in QT to check on the inspector and this is what is telling me:
    Apple OpenDML JPEG, 1280 X 720
    FPS: 24
    Normal size: 1280X 720
    Current size: 1280 X 720 (Actual)
    What do I need to do, so that the sequence settings are very similar to my AVI files? Or to make the same? I assume that if I pull the corners to fill the frame, I am loosing quality? Is that the case?
    Since I need to deliver this today I will continue working on the sequence as with the former settings, but I am wondering that if I have to change the settings, will this affect my already edited material? Do I then need to start a new sequence from scratch?
    Sorry, I guess too many questions, but they all lead to the same thing
    Thanks a lot!
    Emil

    I have a D3s. I'm using FCP7, it's been awhile since I used version 5 so all I can do is let you know my workflow with ver.7 If you convert to ProRes 422 1080x720 24fps, it works very well, change the audio from 44 to 48kHz and set the frame rate to 24 instead of 23.98
    Here's what I do.
    1. Copy the CF card to the HD of the computer
    2. Open Compressor, in these next steps we'll make a custom Droplet.
    a. In the Settings tab, select Formats > Quick Time > Apple ProRes 422
    b. Drag this to "Drag Settings & Destinations Here" and click it
    c. In the Inspector, select Encoder
    d. Select Video Enabled, then hit Settings. Frame rate 24 > OK
    e. Select Audio Enabled, then hit Settings. Choose 48 kHz
    f. Save As. Name it. It will be in > Settings tab > Custom
    g. Click your new Cutom setting
    h. File > Create Droplet
    i. select your new custom setting
    j. save it to the desktop, leave destination as source.
    3. open the Droplet,
    4. drag all you D3s clips in, change destination to a new folder
    Now you have all your original .DVI and the converted ProRes clips
    5. Open FCP, select Final Cut Pro > Audio/Video Settings
    6. in the Sequence Setting tab select Apple ProRes 422 1280x720 48kHz
    7. Clip Duplicate and give it a new name
    8. change the Editing Timebase to 24 > OK
    9. select the summary tab click Create Easy Setup
    10. name it, give it a description > Create
    11. the next time your open FCP use this Easy Setup
    12. your D3s clip should not need rendered now.
    13. When your done editing use Send to Compressor
    14. Vimeo will accept a wide varity of formats
    15. I use Quicktime H.264 with settings set to best
    16. For Blu-ray I use Export to QT Movie and use Sony DVD Architect to author the BD at 35 mbps, but that's another story.

  • Sequence settings for combining HD videos, SD videos, and stills to DVD?

    Hi,
    After reading through the forum, I am still not sure whether I should be using the "lowest common denominator" sequence (DV NTSC preset to match the avi footage), the "highest quality" sequence (DSLR 720p preset to match the mov footage), or the sequence which best matches my desired final output (i.e. DV NTSC for DVD output) for a project consisting of HD 720p mov, SD 480i avi, and jpeg source files.
    Obviously, a newbie like me should be using Windows Live Movie Maker or even PE9 rather than PP CS5 but I hate not having a timeline (among other things missing in WLMM) and I'd like to make use of the 8GB of RAM with my Windows 7 64bit system when editing the HD footage.
    Thanks in advance for your feedback and any other suggestions you may have.

    So there shouldn't be an issue if I use source video clips with lower audio sample rates for a sequence with a 48kHz sample rate...
    There should be no real issue, as PrPro is very good at handling most common Bit-depths and Sample-rates. Just allow the program to go completely through the Conforming process. Depending on one's computer and the Duration (plus CODEC's, etc.), this should not take very long - just be patient.
    Good luck,
    Hunt
    PS - I agree completely with Harm's comment on up-rezzing SD to HD, however there are a few programs, like Red Giant's Instant HD, that do a pretty good job. If your final output is SD, then definitely go with Harm's suggestions and down-rez (Effect>Motion>Scale) for the HD material.
    PPS - for inclusion of stills, I Scale my images in PS to match my Project's/Sequence's Frame Size, though I have it from a very good source (Todd), that PrPro CS5 has improved the Scaling algorithms over previous versions.

  • ITunes says registry settings for importing and burning CDs or DVDs are missing.

    i get a message after installing itunes 10.7 that registry settings are missing for importing and burning CD/DVDS. Says probably due to installing other burning sofware. Re-install ituenes.  I never installed anything between the older 10.6 and the new 10.7........just updated when it said new Apple software was available.  The update process seemed to delete the 10.6 install and then re-install a new version of itunes, 10.7.  Then the registry settings error message started coming up each time I start itunes. What's the proper way to re-install?
    Thanks for any suggestions.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

Maybe you are looking for