Sequences in Multicam not grouping

Hello,
So I'm video tutorialing my way through the wondrous world of multicam, but I have a sequence that are two clips that I have grouped together on the timeline, but won't remain so when I bring them into multicam.
Is there any way around this? Or not around it, but to solve this?
I appreciate the help!

Because as soon as I nested all of my video tracks, they somehow...morphed into one.
That is by design.
Nesting Sequences
https://www.video2brain.com/en/lessons/nesting-sequences
Nesting sequences
http://tv.adobe.com/watch/learn-premiere-pro-cs6/nesting-sequences/
Nest sequences
http://help.adobe.com/en_US/premierepro/cs/using/WS3E67AF4C-B2A2-4f04-90B4-F8CCFB74B144.ht ml#WSEC1CCB36-CFD4-4d60-ABDF-B4F9BE339B05

Similar Messages

How to edit source sequence from 'multicam mode' sequence (not bearing multicam icon)?

I'm 'multicam editing' what i believe I setup as a regular sequence, then enabled (i believe by nesting) as opposed to a textbook multicam sequence setup with multicam icon where you setup a 'source' then a 'target' prior to starting. my 'multicam' sequence that works like a charm does not bear the multicam icon. Is there a difference between the two or are they essentially the same?
I was able to switch cameras on the fly like a charm so i 'multicam' edited an entire show when I realized I had 1 minor audio-to-picture beat-mismatch to correct in the source.
I read that to fix this, press Ctrl+Shift+F where you want to open the source sequence in the Timeline panel (and this did open expanded tracks as expected near that designated point in the timeline) so i made the quick edit and saved changes. But now playing back my multicam sequence (that does not have a multicam icon), I'm not sure what i must do to see those changes so i can continue/finish my show edit? it isn't automatically doing this as i would expect.
i'm forced to wonder what's going on, what 'source' I actually edited, and how or if it is connected to my multicam sequence if at all. my icons seem reversed to me i.e. the sequence with expanded independent a/v tracks bears the 'multicam' icon whereas the sequence I actually did the multicam switching on the fly does not bear the 'multicam icon' or the audio-picture realignment edit I made in the expanded tracks.
if these two are related, why do edits in the expanded sequence not reflect in the collapsed. is there any other way to reveal/expand the multicam sequence? so confused.
Message was edited by: Tanya Lee
Message was edited by: Tanya Lee

I'm 'multicam editing' what i believe I setup as a regular sequence, then enabled (i believe by nesting) as opposed to a textbook multicam sequence setup with multicam icon where you setup a 'source' then a 'target' prior to starting. my 'multicam' sequence that works like a charm does not bear the multicam icon. Is there a difference between the two or are they essentially the same?
I was able to switch cameras on the fly like a charm so i 'multicam' edited an entire show when I realized I had 1 minor audio-to-picture beat-mismatch to correct in the source.
I read that to fix this, press Ctrl+Shift+F where you want to open the source sequence in the Timeline panel (and this did open expanded tracks as expected near that designated point in the timeline) so i made the quick edit and saved changes. But now playing back my multicam sequence (that does not have a multicam icon), I'm not sure what i must do to see those changes so i can continue/finish my show edit? it isn't automatically doing this as i would expect.
i'm forced to wonder what's going on, what 'source' I actually edited, and how or if it is connected to my multicam sequence if at all. my icons seem reversed to me i.e. the sequence with expanded independent a/v tracks bears the 'multicam' icon whereas the sequence I actually did the multicam switching on the fly does not bear the 'multicam icon' or the audio-picture realignment edit I made in the expanded tracks.
if these two are related, why do edits in the expanded sequence not reflect in the collapsed. is there any other way to reveal/expand the multicam sequence? so confused.
Message was edited by: Tanya Lee
Message was edited by: Tanya Lee

Color correction problem between original sequence and multicam sequence... Please help

I used three camcorders to record a youth dance recital. I created an orginal sequence for the three camcorders and another sequence using the multicam feature to edit the dances. After I finished editing, I went back to the original sequence to make some color correction and brightness adjustments using the Fast Color Correction controls. After that, I sent everything to Encore to create a DVD. When I watched the DVD, I noticed some of my color correction settings were still off, so I went back to the orginal sequence to make some changes. Unfortunately, the multicam sequence would not read the new settings. After a few unsuccessful attempts to get the clip from the multicam sequence to read the clip from the original sequence, I decided to start over by clearing the Fast Color Correction controls from the clip. The multicam sequence then adjusted back matching the original sequence. However, when I started a new Fast Color Correction control in the original sequence, the multicam sequence would not take the new settings. How to I get the mulitcam sequence to read the orginal sequence?

Thank Jim for replying:
I am stumped on this one. I did a few radical tweeks and it did not take. For example, I made one clip in the original sequence go completely dark. However, the clip in the mulicam sequence did not change.
I even deleted the render files and the work area render files and started over with making changes. Nothing. Any change I make on the original sequence will no longer adjust in the multicam sequence.
Any last words of advice before I delete the entire multicam sequence and start over? Thanks.

Thread 1 cannot allocate new log, sequence 5720 Checkpoint not completed

Hi,
I can see a lot of messages like that:
Thread 1 cannot allocate new log, sequence 5720
Checkpoint not complete
What is the problem?? I think is about permissions.
What permissions do i need to give to log_archive_dest directory and redo log file directory??
Is the only thing that i can see that coulb be the problem because my HP-UX change the permissions of some directories sometimes and the SYS ADMIN don´t know how and why.
I can do:
SQL> alter system switch logfile;
System altered.
SQL> alter system checkpoint;
System altered.
Tks,
Paulo.

Thread 1 cannot allocate new log, sequence 5720
Checkpoint not complete
What is the problem?Lgwr wants to switch to and reuse the "tail" redo group, but since checkpointing for that group is not yet completed, lgwr has to wait until all data, that the redo protects, has been written down to datafiles. This stops (temporarily) writing of redo from buffer to log files and you get that message in the alert.log.
How many redo log groups and what is their size?

Thread 1 cannot allocate new log, sequence 1196,Checkpoint not complete

We were receiving the following messages in alert log. We have Oracle 10g R2 database having four redo log groups with two members each (50 MB). To overcome this error yesterday we added two more groups with same config. Again we received the same message in the alert log.
Alert Log contents:
Fri Dec 22 11:21:39 2006
Thread 1 cannot allocate new log, sequence 1193
Checkpoint not complete
Current log# 1 seq# 1192 mem# 0: /u02A/oradata/admin/origlogA/redo01.log
Thread 1 advanced to log sequence 1193
Current log# 5 seq# 1193 mem# 0: /u02A/oradata/admin/origlogA/redo05.log
Thread 1 cannot allocate new log, sequence 1194
Checkpoint not complete
Current log# 5 seq# 1193 mem# 0: /u02A/oradata/admin/origlogA/redo05.log
Current log# 5 seq# 1193 mem# 1: /u02B/oradaFri Dec 22 11:21:50 2006
Thread 1 advanced to log sequence 1194
Current log# 6 seq# 1194 mem# 0: /u02A/oradata/admin/origlogA/redo06.log
Current log# 6 seq# 1194 mem# 1: /u02B/oradata/admin/origlogB/redo06_2.log
Thread 1 advanced to log sequence 1195
Current log# 2 seq# 1195 mem# 0: /u02A/oradata/admin/origlogA/redo02.log
Current log# 2 seq# 1195 mem# 1: /u02B/oradata/admin/origlogB/redo02_2.log
Fri Dec 22 11:22:05 2006
Thread 1 cannot allocate new log, sequence 1196
Checkpoint not complete
Current log# 2 seq# 1195 mem# 0: /u02A/oradata/admin/origlogA/redo02.log
Current log# 2 seq# 1195 mem# 1: /u02B/oradata/admin/origlogB/redo02_2.log
Thread 1 advanced to log sequence 1196
Current log# 3 seq# 1196 mem# 0: /u02A/oradata/admin/origlogA/redo03.log
Current log# 3 seq# 1196 mem# 1: /u02B/oradata/admin/origlogB/redo03_2.log
Thread 1 cannot allocate new log, sequence 1197
Checkpoint not complete

You might not want to revivify threads from 2006. Create a new thread, including all the information to make it a [url http://catb.org/esr/faqs/smart-questions.html]smart question. Which version and patch level of Oracle are you on, which platform, how often are your logs switching, a relevant clip from your alert log surrounded by {noformat}{noformat} tags, etc.

Why is it that when I try to open a project, it says "the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type"?

It could be opened last night but today it just kept showing "the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type". I really need to access my video.
Some help out there, please?

Hi,
Please check this out : https://forums.adobe.com/message/4626663#4626663#4626663
Thank You
Arjun

I lost all of my Itunes music because of an infection that required them to wipe my computer. I am trying to get the music back from multiple sources. What I have recovered is a mess. Albums are mixed or songs not grouped as album. Help?

My computer got infected with some terrible virus. I contacted the manufacturer and they said the only thing to do was wipe the whole thing. I could not back it up bec this mess?ause it would include the infection. I have been trying to recover the lost music from several different places. A friend tried to help me by putting all of his music on my computer from his external hard drive. That was very nice of him but now it is a terrible mess. The recovered songs are not grouped into albums correctly. Some albums are mixed - every other song is from the other album. Some songs are listed separately and not grouped as an album. I tried to ask iTunes to find album art work and it has been running that for over 48 hours. Is that possible? When I try to stop it I get a message that says I will lose all the data. I admit that I am not very tech. savvy and I really don't know what I am doing. It took me more than 20 years to make that collection and I am heart broken. Do you have any ideas about how I start to fix

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

How do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

how do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

An out-of-sequence check is not permitted for payroll type B

We had to do advance payments for 4 pay periods for an employee through offcycle workbench. One of the checks was wrong so we had to reverse it. It is an out of sequence reversal. Now when i try to do a correction run , it gives me an error An out-of-sequence check is not permitted for payroll type B
How can i run the correction run now. Please help
Edited by: sagarika sharma on Aug 14, 2010 6:29 AM

Check with SAP note 1425764,696067 and 1127119.
Mohan

The DSLR sequence settings are not showing up for me. (I bought CS6)

Like I said my DSLR sequence settings are not showing up for me even though I bought Premiere Pro CS6, I look for a solution but all that came up was that this happens with a trial verison and I don't know what to do.

Did you buy ONLY PPro, or did you buy a suite?
Did you install the program AND the extra content?
Also... More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Events are not grouped by date

Recently I had a crash on my iPhoto and had to basically re-input all 60,000 photos. All went well and iPhoto working okay now. Only issue is the events are not grouped by date anymore. meaning I have several events that are on the same date. All the setting appear to be correct.
Is there a way to have iPhoto regroup the events all by date?

The only way to sort events is the view menu --> sort events - Using it you can re-sort events a few ways
Events are not categorized so there is no way to "re-categorize" them
What you need to do is to restore your backup of the iPhoto library from before the crash that caused you to import your masters folder into iPhoto
And probably if you had rebuild the library after the crash you would have been OK - Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database -- this will not help on the new library that you created - it has to be done on the bad library that resulted from the crash
LN

Some Conversations Not Grouping in Outlook 2010

I have just purchased outlook 2010 about a month ago and have already noticed that it is very quirky, and I am kind of disappointed in the performance of the program. I am a home user, and I like the functionality of Outlook as I am used to it from work
and the ability it has to hold my contacts, calendars and emails all in one place.
Anyway, the problem I am having at this current time with Outlook is that the conversation function is not working properly. For a majority of my group emails (about 70%), the conversation feature works great and groups all of my "chain" emails between friends
or family together (based on topic). However, I have been noticing a few email chains are not grouping properly. Sometimes outlook will leave one message out of the group or it just wont group the emails at all, and I am left with a cluttered and unorganized
inbox.
I have done a lot of research on this already and have found nothing. I am aware of the fact that the conversation feature works off of the email subject line, and for the emails that do not get grouped in the conversation have nothing changed at all in regards
to the subject line. All these emails are grouping properly on my iPhone as well, so Apple's software seems to be working with no problems.
Does anyone have any clue what else could be affecting some of my emails and emails chains from grouping with the conversation setting? Thanks in advance!

Hi Nalin,
Outlook 2010 doesn’t group the conversation based on subject, It uses the message header (Thread-Index:) to group the messages.
http://office.microsoft.com/en-us/outlook-help/view-e-mail-message-headers-HA001230300.aspx (Find: conversation)
Thanks, Dilip
Hi Nalin,
Thanks so much for your reply. :-)
Hi Dilip,
Thanks for your reply too. I saw some posts talking about this the other day. So in light of the conversation thread here and what you've brought up...that Blackberry devices seem to alter the Message Header, then, which in turn causes the
Blackberry reply emails to be separated from the rest of the email conversation grouping in Outlook 2010, do you know of a way to configure Blackberry devices so that they maintain the same Message Header so that a Blackberry reply email remains with the original
Outlook email conversation group?
Thanks!
Well, I've done a little more research. A
post from a guy named David Hogue led me to this tool named
MFCMAPI. You don't have to install it. You just run it. So I used it to navigate to emails in my folders where 4 emails were properly grouped and 2 emails were excluded from this conversation group (but they should have been
included).
Looking at the properties of the emails, I noticed there is a property called "Conversation ID". This seems to be the property responsible for keeping the emails properly grouped together. The problem, though, is that Outlook has the additional
complexity of showing the little orange lines and dots to display emails in the conversation at the proper level, what email the reply was in response to in the conversation thread, etc. Because of these additional features, the "Conversation ID"
is not just a standalone property value that can be adjusted. It's buried within binary information which includes all of this leveling information. So I could not find an easy way to adjust the "Conversation ID" and also have
all of this other information Outlook uses for conversation grouping level purposes.
Here's an additional test I did just to see how Outlook handles grouping. I took one of the emails that is currently excluded from the proper conversation thread. I started an email reply from it, changed the recipient to myself, and changed
the subject line to make sure that it used "Re: " before sending the reply email to myself. The email I received ended up being grouped properly with the rest of the conversation. Therefore, my conclusion is that Blackberrys are doing something
even deeper than just changing the "RE: " to "Re: " which is causing this problem. Whatever the Blackberrys are doing, they are causing Outlook to flag the email as a separate conversation and after Outlook has done this, the complexity of the email's
properties are such that trying to get this email back into the right conversation thread is not an easy task at all.

JPG and RAW files are not grouped together.

I am finding that my RAW and JPG files are not grouped together. They show up on the Grid View as JPG for the JPG file and RAW + JPG for the NEF(RAW) file. This does not seem to be consistent through out the folder. Some of the pictures are grouped together and others are not. The ones that are not grouped together have been auto-stacked and then unstacked. I am not sure if this is what caused the seperation of JPG and RAW files. I did try to take a picture that I had auto-stacked it and then remove it and it did not sepearate. The "Treat JPG files next to raw files as seperate photos" option is turned off, like it is in my Lightroom 3.

This is what I'm talking about:
Show subfolders are on:
In windows Explorer:
In the Import Dialog:
Where are the files?
If I click on the Folder 2014_12_14... all the files from all folders will populate.

Document Sequence Information Does not Exist for Bank Account

Hello,
Oracle E-Bus Suite: 11.5.10.2
OS: Windows 2003
We are facing the problem while executing the ARPLABIM - Bank Statement Import program, 'Document Sequence Information Does not Exist for Bank Account'.
We have already reviewed Oracle Metalink Document: Document Sequence Information Does not Exist for Bank Account: Doc ID: Note:147773.1.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3345134018905587318::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,147773.1,1,1,1,helvetica
But the profile option Sequential Numbering cannot be set to Not Used due to certain funcational limitations. Please advise any other workaround.
Thank you

Adith,
There are only two options:
1. Setup document Sequence. OR
2. Change the profile either the user level who runs this program (assuming a batch user name) or at the resp or application level. Not necessarily at the site level.
Thanks
Nagamohan

Sequences in Multicam not grouping

Similar Messages

Maybe you are looking for