Sequencing in Quiz Mode

Hello,
Does anyone know if it's possible to ungroup the drop-down
boxes that display with the Sequencing quiz type? I'd like to be
able to superimpose the drop-downs on a graphic, and move the boxes
where I want.
Thanks!

The skip button can be dragged under the Clear button, that will disappear automatically during Preview. But for the Back button I have no solution, mostly I will not show the back button during a Quiz.
Lilybiri

Similar Messages

Buttons in Quiz mode and Review mode

In Cp5.5, is there any method to achieve this: when in Quiz mode, don't allow (or don't show) the Back and Skip buttons. In Review mode, allow (show) them.
Additionally, is it possible to only prevent jumping straight into Review mode on the first quiz slide, after clicking Back button. If the Back button is present and if the user (maybe mistakenly) clicks it, the test is over. He is in Review mode now and the Submit button is gone forever.

The skip button can be dragged under the Clear button, that will disappear automatically during Preview. But for the Back button I have no solution, mostly I will not show the back button during a Quiz.
Lilybiri

I can not play the sequence in preview mode. How do I fix this issue?

Each frame loads in the preview window when highlighted, but I can not play the sequence.

I am working on a project for school. I have been draging clips down to the timeline and matching it with a few voice overs. Nothing too complex. I have been previewing my work as I go by pressing the space bar, Im not sure what I did but now Premiere will not play the preview in the Program sequence window.

How to edit source sequence from 'multicam mode' sequence (not bearing multicam icon)?

I'm 'multicam editing' what i believe I setup as a regular sequence, then enabled (i believe by nesting) as opposed to a textbook multicam sequence setup with multicam icon where you setup a 'source' then a 'target' prior to starting. my 'multicam' sequence that works like a charm does not bear the multicam icon. Is there a difference between the two or are they essentially the same?
I was able to switch cameras on the fly like a charm so i 'multicam' edited an entire show when I realized I had 1 minor audio-to-picture beat-mismatch to correct in the source.
I read that to fix this, press Ctrl+Shift+F where you want to open the source sequence in the Timeline panel (and this did open expanded tracks as expected near that designated point in the timeline) so i made the quick edit and saved changes. But now playing back my multicam sequence (that does not have a multicam icon), I'm not sure what i must do to see those changes so i can continue/finish my show edit? it isn't automatically doing this as i would expect.
i'm forced to wonder what's going on, what 'source' I actually edited, and how or if it is connected to my multicam sequence if at all. my icons seem reversed to me i.e. the sequence with expanded independent a/v tracks bears the 'multicam' icon whereas the sequence I actually did the multicam switching on the fly does not bear the 'multicam icon' or the audio-picture realignment edit I made in the expanded tracks.
if these two are related, why do edits in the expanded sequence not reflect in the collapsed. is there any other way to reveal/expand the multicam sequence? so confused.
Message was edited by: Tanya Lee
Message was edited by: Tanya Lee

I'm 'multicam editing' what i believe I setup as a regular sequence, then enabled (i believe by nesting) as opposed to a textbook multicam sequence setup with multicam icon where you setup a 'source' then a 'target' prior to starting. my 'multicam' sequence that works like a charm does not bear the multicam icon. Is there a difference between the two or are they essentially the same?
I was able to switch cameras on the fly like a charm so i 'multicam' edited an entire show when I realized I had 1 minor audio-to-picture beat-mismatch to correct in the source.
I read that to fix this, press Ctrl+Shift+F where you want to open the source sequence in the Timeline panel (and this did open expanded tracks as expected near that designated point in the timeline) so i made the quick edit and saved changes. But now playing back my multicam sequence (that does not have a multicam icon), I'm not sure what i must do to see those changes so i can continue/finish my show edit? it isn't automatically doing this as i would expect.
i'm forced to wonder what's going on, what 'source' I actually edited, and how or if it is connected to my multicam sequence if at all. my icons seem reversed to me i.e. the sequence with expanded independent a/v tracks bears the 'multicam' icon whereas the sequence I actually did the multicam switching on the fly does not bear the 'multicam icon' or the audio-picture realignment edit I made in the expanded tracks.
if these two are related, why do edits in the expanded sequence not reflect in the collapsed. is there any other way to reveal/expand the multicam sequence? so confused.
Message was edited by: Tanya Lee
Message was edited by: Tanya Lee

IPod stuck in Music Quiz mode

The strangest thing happened to me the other day. I was playing the music quiz game, quit, and tried to simply listen to some music. To my shock, however, my iPod continued to only play the 10-second clip from the quiz game for each song. The first song of any playlist I selected would start at the beginning and play for 10 seconds, and the rest would just pick up at some point in the middle. I managed to fix the situation by entering and exiting the quiz game again, but I remain completely baffled by this little experience. Has anything like this happened to anyone else out there? Does anyone know how it could have happened, or how to make it happen voluntarily?

this happened to me a couple of years ago with a 4g b/w. same solution too.

Sequencing Screen Captures in Edit Mode

I've used Camtasia alot and am transitioning to Captivate. To
test recording and editing in Captivate, I recorded one minute of
screen activity to simulate capturing an application demo. When I
end the recording, it converts the recording to thumbnails and puts
them in Storyboard mode but also chunks it into slides that I can
not sequence in Edit Mode. I get 10 seconds chunks and I can't
figure out how to put them together to make one sequence. Do I have
a wrong setting? Any help is greatly appreciated.

Hi Jennifer and welcome to our community
This isn't intended to slam or highlight either product, only
to point out differences.
Camtasia captures full motion from the onset. Captivate
captures individual screen shots and places them on slides.
Captivate does do full motion capture, but it's not intended to be
used like Camtasia's is. For example, you would never want to
surround Windows Media Player using Captivate and record a five
minute video. But you could do this with Camtasia. (copyrights
notwithstanding)
Camtasia allows text captions, but you have to add them after
the fact. Captivate can add these things automatically. Captivate
wins with these hands down, as there is more variety and they look
more polished and professional.
Captivate has only two different output types. .SWF and .EXE.
Camtasia offers a wider selection. Including .FLV (Flash Video) ,
.AVI (Audio/Video Interleave, .WMV (Windows Media), .QT
(QuickTime), .RM (RealMedia).
The Camtasia Timeline represents the entire project.
Captivate's Timeline is per slide.
Camtasia has some neat transitions you may use, but you have
to split the movie manually and it takes a bit of getting used to.
Captivate has a few transitions for slides, but the process seems
more intuitive. At least to me.
Captivate offers three "levels" of audio. Background track,
Slide and Object. Camtasia essentially has two and seems a bit
rigid as opposed to Captivate.
Both products offer quizzing functionality. However,
Captivate's seems more robust and easier to use. At least it does
to me.
Both products record the screen, but as near as I can tell,
Camtasia is unable to record like Captivate does, where you end up
with a simulation. You may certainly add Flash hotspots later, but
Captivate does it for you.
Those are just a few differences I noted. There are many
more. Hopefully this helps give you an idea. Personally, while both
products do essentially the same thing (record the screen) I easily
see a need to have both.
Hopefully this was helpful... Rick

ORA-20101: Row based mode not supported

Hi,
I'm having this situation:
Process flow with 4 mappings ends with 2 mappings successfully and 2 mappings with error:
ORA-20101: Row based mode not supported
But when I started those mappings separatly (one by one) they've all completed successfully.
Is it possible that default operating mode and generation mode can cause this error? On those 2 mapping that failed the default operating mode and generation mode was SET_BASED. But it was the same when I ran them again and they did complete with success..
Has anyone came accross with this or similar situation?
Any help would be much appreciated.
Regards
Vedran

Vedran,
What's the version of owb you are using?
can you post header of the package assiociated to process flow?
I had a problem running my "Set Based" mapping. It fails with the same error message "Row based mode not supported".
I noticed that the sequence of "Generation Mode" in my OWB 11.2 (on windows) was:
row_based = 1
row_baesd_target =2
set_based=3
set_based_failover=4
set_based_failover_target=5
but that of related package header was:
MODE_SET CONSTANT BINARY_INTEGER := 0;
MODE_ROW CONSTANT BINARY_INTEGER := 1;
MODE_ROW_TARGET CONSTANT BINARY_INTEGER := 2;
MODE_SET_FAILOVER_ROW CONSTANT BINARY_INTEGER := 3;
MODE_SET_FAILOVER_ROW_TARGET CONSTANT BINARY_INTEGER := 4;
I think it is a bug because changing this part of package as following and recompiling the package, my problem has been solved:
MODE_SET CONSTANT BINARY_INTEGER := 3;
MODE_ROW CONSTANT BINARY_INTEGER := 1;
MODE_ROW_TARGET CONSTANT BINARY_INTEGER := 2;
MODE_SET_FAILOVER_ROW CONSTANT BINARY_INTEGER := 4;
MODE_SET_FAILOVER_ROW_TARGET CONSTANT BINARY_INTEGER := 5;
Regards

How do I get a lip sync flash frame sequence to encode properly

I built a flash frame sequ
ence in Premiere. It is 2 seconds long with the
first two frame white and the remaining time black
frames. This is repeated for 1 minute. If I encode it in non-compressed AVI it is correct. If I use
MPEG2 or H.264 to build a transport stream, I see two white frames
as I would expect,then black frames for the rest of the sequence. Over 15 seconds, I will start to see three frames, gray, white and gray again. Eventually, the white or gray frame starts two frames later than it should. I built this as a 720P/60 sequence with non-drop frame timecode. I have tried all I frames and the same issue occurs. The GOP structure does not seem to have an effect. There is no audio in this stream. It as if it cannot handle the quick and short transistion from white to black. There are some advanced settings for MPEG 2 but I cannot see where they are explained in the Premier help document. I need this stream to measure latency on a piece of video equipment.
Thanks
Ralph

Bill,
Your answer gave me a hint to what was happening. I'm fairly new to Premier and took for granted that the preset I chose at the begining of the program would carry through to the sequence, wrong! I found another discussion that talked about resetting the properties of a sequence. I expanded the project box a little and saw that it said my sequence was 59.94 frame rate not 60. I followed the instructions on the other discussion. File, new sequence, general, editing mode, and frame rate. The frame rate was set to 59.94 not 60. I reset it to 60, closed all the menues and deleted the original 59.94 sequence. The new sequence I just created shows a 60 Hz frame rate. I exported my lip sync project as an MPEG 2 transport stream and it was correct according to our MPEG analyzer.
Thanks again for the help.
Ralph

I'm using premiere pro CC 2014 for 4k editing. whenever I play the sequence cut off only window (premiere pro cc 2014).

I'm using premiere pro CC 2014 (trial version) for 4k editing.
but I saw the play sequence problem.
whenever I play the sequence cut off only window (premiere pro cc 2014).
but mac was fine.
I can't using realtime play.
my sequence setting information
sequence > sequence settings
editing mode : custom
timebase : 59.94 frames/second
video
frame size 3840*2160
pixel aspect ration : square pixels(1.0)
fields : no fields (progressive scan)
display format : 60fps
audio
sample rate : 48000 Hz
display format : audio sample
video previews
preview file format : quick time
codec : Gopro Cineform
Maxium bit depth : uncheck
Maxium render quality : uncheck
composite in linear color : check
check it please my workstation spec.
1. HP Workstation (Z840)
    * CPU : Intel Xeon E5-2690v3 2.6Ghz
    * RAM : 128GB
    * Graphic Card : Quadro K5200

Now I see is fully integrate with the OS preference. If you change the scale in windows resolution Preference, Premiere Pro scale too.
Thanks.

Whatever happened to draft mode?

Back in the day of FCP3 I appreciated being able to quickly change a sequence into Draft mode so it was easy to quickly work on multi layer composits then switch back to full res and render.
Is there a similar way to do this in FCP5? Most of the time the real time is fantastic but occasionaly I work on something that takes forever to display (ie anything longer than 1 sec) everytime I alter a setting, yet I haven't found anything that works as effectively as in FCP3.

Hi Mike - you can "dumb down" your rt settings.
Sorta akin to draft ... lo res.
Have to switch out of dynamic IIRC.

Is there a way to use an individual Incorrect Message for each quiz page

The normal message
INCORRECT Click anywhere or press 'y' to continue
Could there be a way to use this for a different message on each quiz so that you could write "Your answer was wrong it should have been ...."
This would avoid branching or using Review Quiz.
The problem with Review quiz is that you have to have the Forward Navigation button showing all the way through the Presentation and Quiz (although deactivated) and tell users this is only for use in the Review Quiz mode.
It would be better if in Review quiz it was possible to review and move on with a Next button, has that been done?
Ashley

Hi
Thanks for your guidance
This has opened up my mind , I now I find I am totally distracted from
the CP project I should be working on.
So I find I have two further problems or maybe they are questions
I could not find a Tutorial on Scripting is it in Further tutorials ,
because for some reason my computer although connected to the internet
will not open anything just a message to say I need an internet
conection; this will be an internal IT issue.
Secondly exploring the help I tried the
Create static widgets
Select File > New > Widget in Flash.
In the Create New Widget dialog box, do the following:
In the Widget menu, select Static.
In the ActionScript Version menu, select the ActionScript version that
you plan to use when writing the widget code in Flash.
Click OK.
In Flash, right-click the Actions layer in the Timeline, and select
Actions.
The Actions panel appears with the template code for the static widget.
Customize this code to create your widget.
New project startup
You can see the option is greyed out for me!
Inside a Project - Same thing
What have I not understood
Totally unrelated issue
The company has bought 2 copies of ADOBE ELEARNING SUITE would you
believe after 3 weeks I still do not have an activation code ADOBE say
they are having problems with their system
Kind regards
Ashley Galloway
International Training & eLearning Manager
Message was edited by: Captiv8r - Removed personal information and company disclaimer that had apparently been automatically added during an E-Mail reply.

Question on Quiz Slides

Does anyone know how to make the NEXT button on quiz slides appear after you hit the correct answer instead of displaying on the slide the entire time?

Which version?
During the quiz, the Next button is not necessary at all, it is only meant to be used when the learner wants to skip the question, and it is necessary during review. I will mostly hide the Next button all the time when the Question slides are in Quiz mode, by dragging it under the Clear button. Advancing to the next slide in Quiz time is happening after the second step for submitting (if attempts are exhausted). Check this blog post:
http://blog.lilybiri.com/question-question-slides-in-captivate
If you put the attempts to infinite on question level, the user will never be able to go to the next slide until he has submitted the correct answer. Is that what you want?
Lilybiri

Showing Clock time and hiding Skip button during Random Quiz

Is there a time object that can be displayed during the entire quiz. Would like the users keep track of their remaining seconds per question.
Also if I dont want the users to Skip a question I can easily hide it. But if this button is hidden then how do I progress to the next question while in Review Quiz mode since Submit is already disabled.

Hi all
I do believe the forum moderators place a hold on any attachments until approved. Probably depending on forum activity it could take quite some time to see the attachments actually approved.
Note that you are able to add an attachment immediately to something like YouSendIt. You could then insert a link to the download page. Not as convenient as uploading to the forums, but not as restrictive either. Live is a trade off.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Ongoing problems with newest Mac Pro and CS4

Hi all,
I've just switched from a Final Cut Pro editorial house to a new company that bases production around the Adobe Production Suite using Premiere Pro CS4 for all our editing needs. From what I understand about this company (and this workstation) is that Premiere Pro CS4 has been buggy on this machine and this machine only. I find this strange as it is one of the newer high end mac systems available right now and is more than capable of crushing most video that will be put into it.
In brief a summary of the problems include;
1.) Final exports rarely work, no matter the codec, bit rate, size, duration, etc.
2.) If AME CS4 does manage to successfully export a piece it will generally have random black frames right at every cut starting about halfway through the piece.
3.) Even so much as switching sequences within a project manages to bog the system down and crash it, thus making me have to force quit the program and occasionally restart the machine.
4.) After rendering the work area the machine suddenly becomes unresponsive and thus causes another crash/force quit scenario.
5.) Certain audio tracks will play for about 2min and 30seconds and then mysteriously go silent, while a clear and present waveform is able to be seen (however occasionally premiere will cut this part of the clip off!)
I will post the hardware and software specs below but I feel it is necessary to detail why I find these problems to be extremely peculiar.
Firstly the projects we have are generally shot on the 5D MkII. I understand CS5 has the ability to play these clips back through it's mercury playback system (after it's own internal conform) at real-time and allow you to edit as if it had been transcoded traditionally. We are planning on obtaining a copy of CS5 in the near future but I am currently worried if these problems may be associated to faulty hardware.
Upon my arrival I formatted every drive and did a clean install of OSX Leopard 10.6.5 as well as a fresh install of Adobe Production Premium CS4 (updated to most recent release). This leaves out any possibility of a plug-in such as the red giant filters or sapphire filters interfering with the rendering and exporting process. Nothing seems to work. Even throwing an uncompressed 8-bit clip into AME CS4 manages to crash it.
A coworker of mine had two great ideas on the problem the other day for me to test out. The first being that it could be a bad piece of ram. I figure this could be a possibility as I don't know the history of this machine and I noticed all the RAM slots are full of 1gig sticks (and two 4gig sticks) so there could be a bad one in the bunch. I went through the process of elimination leaving one stick in at a time and testing an export (extremely time consuming) and every time it failed. His second idea was to take my project file and associated media to the creative directors computer which happens to be a two year old Mac Pro running CS4 (on OSX Leopard). He has several plug-ins installed along with tons of additional applications etc etc. Sure enough I loaded up my project file consisting of a bunch of 5D MkII footage and it played back perfectly, exported perfectly, tabbed through sequences perfectly, and did everything it should!
My question is why. Why would his older machine work with this footage on the same version of Premiere Pro CS4 and not my newer, faster, shinier editing machine? I've done everything I can to test any theory I've come up with both from my own experience as well as through internet research. Deleted PList, emptied RAM, emptied Cache, reformat and reinstall, swap RAM around, tested different hard drives, etc. The problem is not isolated strictly to the H.264 files the 5D MkII produces either, as even the uncompressed 8-bit files I've brought in won't play nicely with the system either. It's such a bummer that my first experience with Premiere Pro had to be on a machine that has these horrible quirks but I feel it has a lot to bring to the table over Final Cut Pro and I would love to find a solution to this problem so I can get back to cutting!!
Thank you in advance for all of your help!
System Specs (Hardware)
-Mac Pro 5,1
--2 x 2.93 GHz 6-core Intel Xeon
--14 GB 1333 MHz DDR3(all tested OK)
--ATI Radeon HD 5770 (also tested with a new nVidia card as well)
--(Internal) Operating System Hard Drive - 250GB 7200 RPM
--(Internal) Project File Storage - 1TB 7200 RPM
--(Internal) Preview File Storage - 500GB 7200 RPM
System Specs (Software)
-Mac OSX Snow Leopard 10.6.5
--QuickTime X v10.0 (118)
--QuickTime 7 Pro v7.6.6 (1710)
---QuickTime Version 7.6.6 (1756)
--Adobe Premiere Pro CS4 v4.2.1 (003 (MC: 166418))
--Adobe Media Encoder CS4 v4.2.0.006
Example Sequence Settings and media for a usual Project File
-Media
--24GB of 5D MkII footage (1920x1080P 23.976 frames/second H.264 files straight off the card)
--2GB of sync sound (.WAV)
-Sequence Settings
--Editing Mode: Desktop
--Timebase: 23.976 frames/second
--Frame Size: 1920 horizontal 1080 vertical 16:9
--Pixel Aspect Ratio: Square Pixels (1.0)
--Fields: No Fields (Progressive Scan)
--Display Format:24fps Timecode
--Audio Sample Rate: 48000 Hz
--Display Format: Audio Samples
--Video Previews File Format: I-Frame Only MPEG
--Codec MPEG I-Frame
--Maximum Bit Depth (Unchecked)
--Maximum Render Quality (Unchecked)
Adobe Media Encoder Export Settings from Uncompressed 8-Bit FILE to High Quality H.264
-Source Clip: Uncompressed 8-Bit 4:2:2, 1920 x 1080 Millions, 16-bit Integer (Little Endian), Stereo (L R), 48.000kHz 23.98, Data Rate of 799.15 mbits/s.
-Format: H.264
-Preset: HDTV 1080P 24 High Quality
--Customized to:
---24fps -> 23.976fps
---Pixel Aspect Ratio: Widescreen 16:9 -> Square Pixels
---Bitrate Encoding: VBR, 1 Pass -> VBR, 2 Pass
---Source XMP metadata turned OFF
Adobe Media Encoder Export Settings for Premiere Pro SEQUENCE to High Quality H.264
-Source Sequence: See above example.
From AME Directly: [File>Add Premiere Pro Sequence>Project>Sequence>OK] (Usually takes a long time to get Sequence section to show up)
From Premiere Pro: [File>Export>Media]
-Format: H.264
-Preset: HDTV 1080P 24 High Quality
--Customized to:
---24fps -> 23.976fps
---Pixel Aspect Ratio: Widescreen 16:9 -> Square Pixels
---Bitrate Encoding: VBR, 1 Pass -> VBR, 2 Pass
---Source XMP metadata turned OFF
Adobe Media Encoder Export Settings for Premiere Pro SEQUENCE to Uncompressed YUV 8 bit 4:2:2
-Source Sequence: See above example.
From AME Directly: [File>Add Premiere Pro Sequence>Project>Sequence>OK] (Usually takes a long time to get Sequence section to show up)
From Premiere Pro: [File>Export>Media]
-Format: QuickTime
-Preset: Custom
--Customized to:
---Video Codec: Uncompressed YUV 8 bit 4:2:2
---Quality 100
---Width: 1920 Height: 1080
---Frame Rate: 23.976
---Field Type: Progressive
---Aspect: Square Pixels (1.0)
---Render at maximum Depth (Unchecked)
---Audio Codec:Uncompressed
---Sample Rate: 48000 Hz
---Channels: Stereo
---Sample Type: 16 bit

The move from FCP to PP is a good one, however, it's only half way there.
Next, move to a Windows 7 64 based machine using an i7 950 and 12 GB RAM at a minimum (with a GTX 460 or better as a seriously considered option), and then upgrade to CS5.
Chances are more than excellent that doing will resolve all your issues.

ABAP- JAVA : How to unzip a zip file sent by ABAP

Hello,
We are using JCO to exchange the XML strings (File Sizes can range upto couple of MBs) between ABAP and JAVA. We were earlier using a STRING parameter for XML data exchange. This approach was resulting in huge performance overheads. As per our initial performance investigations, we have identified that time taken for XML exchange using JCO is the major bottlenecks.
Currently we are evaluating Zip - Exchange - Unzip mechanism for XML exchange.
We now try to ZIP the export content using following ABAP code:
      TRY.
          CALL METHOD cl_abap_gzip=>compress_text
            EXPORTING
              text_in = lv_xmlstring
            IMPORTING
              gzip_out = ev_xmlstring.
This returns an XSTRING (zipped) which is lesser in size as compared to the earlier xml STRING.For zipping the XML String this code works fine. But on java end on using the following code (for unzipping):
public static String unzipStringFromBytes( byte[] bytes ) throws IOException
    ByteArrayInputStream bis = new ByteArrayInputStream(bytes);
    BufferedInputStream bufis = new BufferedInputStream(new InflaterInputStream(bis));
    ByteArrayOutputStream bos = new ByteArrayOutputStream();
    byte[] buf = new byte[1024];
    int len;
    while( (len = bufis.read(buf)) > 0 )
      bos.write(buf, 0, len);
    String retval = bos.toString();
    bis.close();
    bufis.close();
    bos.close();
    return retval;
We get the following error:
java.util.zip.DataFormatException: unknown compression method
     at java.util.zip.Inflater.inflateBytes(Native Method)
     at java.util.zip.Inflater.inflate(Inflater.java:215)
Please share java code snippet which we can use in our program to retrieve our initial XML string.
Best Regards,
Aayush

Hi,
i took a sequence '0123456789' and gziped it with your ABAP code snipped.
Result is in HEX:
'33 30 34 32 36 31 35 33 B7 B0 04 00'
Than i took an good old gzip executable and gzipped a text file with the same sequence in compression mode 6(default of ABAP Method).
Result in HEX:
'1F 8B 08 08 BA B1 D1 45 00 0B 31 2E 74 78 74 00'
'33 30 34 32 36 31 35 33 B7 B0 04 00 C6 C7 84 A6'   <-- quiet similar with ABAP gzip data
'0A 00 00 00'
It seems that some gzip headers and trailers are missing from ABAP Processor's output, i don't know why, maybe it will help you to fake the file headers's to your data section: http://www.gzip.org/zlib/rfc-gzip.html
Other topic is your Exception: java.util.zip.Inflater.inflate(Inflater.java:215)
Inflater is used for ZLIB compressed files, try to pass your InputStream to an Object of [java.util.zip.GZIPInputStream] like:
http://www.galileocomputing.de/openbook/javainsel6/javainsel_12_010.htm [Listing 12.29]
Let me know if it works and have fun.....

Sequencing in Quiz Mode

Similar Messages

Maybe you are looking for