Sequencing of views in MM01

Hi Gurus
Customer Requirement is to maintain the sequencing of views in MM01.
say sequence is KTEN...
If we try to maintain view N after K then there should be error..
any idea welcome..
Thanks in advance

Hi
It is always better to maintain the sequence like this (same as MM01 sequence)
Basic Data 1
Basic Data 2
Classification
Sales: Sales Org. Data 1
Sales: Sales Org. Data 2
Sales: General/Plant Data
Foreign Trade: Export Data
Sales Text
Purchasing
Foreign Trade: Import Data
Purchase Order Text
MRP 1
MRP 2
MRP 3
MRP 4
Forecasting
Work Scheduling
Production Resources/Tools
General Plant Data / Storage 1
General Plant Data / Storage 2
Warehouse Management 1
Warehouse Management 2
Quality Management
Accounting 1
Accounting 2
Costing 1
Costing 2
Sometimes it creates problem when you won't follow this
for example
If you wants to come to Sales data2, without entering the basic sales data in 1 then it will be a problem.
<b>Reward points for useful Answers</b>
Regards
Anji

Similar Messages

Material master ( check after every view of MM01)

Hi friends ..
i have to maintain the sequence of view in MM01 according to the data filled in last view . Is there any exit which triggered after every view..
Any type of idea Welcome.
Regards.
Message was edited by:
Madan Gopal Sharma

Industry
i tried it.. but it is triggering at time of saving only ..i want triggering point after each view
Message was edited by:
Madan Gopal Sharma

Unable To Capture View in MM01

Dear All,
I am unable to capture the 'Accounting' view in MM01.
In recording in SHDB, I find the accounting view cannot be captured.
Please advice.
Regards,
Prosenjit.

Hi Prosenjit,
try to do this it may be help full to you...
while selecting the views in MM01 at the time of recording. If you want to capture Accounting view after selecting required views please press PAGE DOWN button in the key board then select Account view by doing this you can capture the Account view.....
please reward if this helpfull.

BDC Recording of Forecasting View of MM01

Hi Everyone,
I've been working on a BDC to upload consumption values in the Forecasting View of MM01.When there are more than 11 line items then we have to scroll the "TABLE CONTROL". But Page Down does not work in this BDC. The Code that's being used for Page Down in this TABLE CONTROL is "PB09". I've also tried using various codes like P++ etc. I've recorded many MM01 times but could not get a concrete answer.How to get this Page Down work?
Any Inputs will be very helpful.
Regards
Ramky.G

Hi,
Better to use following function module
BAPI_MATERIAL_SAVEDATA
if you find it is usefule , just reward me points
Thanks
Ramesh

Dynamic select views for MM01 Transaction

Hii Friends,
I have an issue like i need to dynamically select the views in MM01 transaction from the BDC program
without selecting that views manually.
Using SHDB recording i can select the views before recording and then call those views again
If i want to select the views from the program how do i do it..
If there is any way to do this in call transaction let me know plz
Thanks in advance
kishore

BDC is not good for MM01 , go for bapi
other wise go for LSMW bapi method...
Business Object      BUS1001006   Standard material
Method               SAVEDATA                    Create and change materia
Message Type         MATMAS_BAPI                 Create and change materia
Basic Type           MATMAS_BAPI02               Create and Change Materia

How to Handle dynamic views in mm01 transaction

Hi ,
Can any body say me how to handle Dynamic views in MM01 tcode. Since every time new view has to be selected, how can we manage this through our program.
Regards,

Hi Nilesh,
Views will be vary based on the Material Type what u are selectiing , so u have to focus on this settings.
Regards
Peram

Adding customized additonal view to MM01

Hi all,
Is it possible to add an additional customized view to MM01, For example i want add an Basic Data 3 view to MM01. Is it possible?
Regards
Vijay

goto SPRO and check for the project name which can be searched using F4 help...If any project component has screen exit FM u can use it...
Adding Views in Material Master
I am trying to add views using MM02. It is showing me just 3 views ...BASIC DATA1, BASIC DATA2 & CLASSIFICATION..... I want to add other views but am not able to do it.
There are 2 ways to add views to the existing material master:
1. Go to mm01
    - Enter the material for which you want to add the views.
    - Then you enter the same material in copy from material
    - Then you may find all the view
    - Then select the views you want to add and make entries in the same view and save it
    All this is done in mm01.
or
    You can mass extend views for a material in tcode mm50.
    Select the maintenance status as V for e.g. if you want to add views of sales. *-- Chirag
2. If the default setting is done in the material of the material type then you may not find the new views in mm01
    If that is the case, then you go to spro >> log general >> mat master >> basic sett >> material types >>
    define attributes of materisl types.
    - Select material type of the material in which you want to make the change
    - Double click on the same, then on right hand side, you will find user parameters under which you will find the views
    - Select the view you want and save your settings
    - Then go to mm01 and do the way it is mentioned in the first step.
Message was edited by:
        Ramesh Babu Chirumamilla

How to add three views in MM01

How to add three custom views in MM01 based on material type.
Regards,
Malla

hi,
This will solve your problem.
[https://forums.sdn.sap.com/click.jspa?searchID=19403068&messageID=5708251]

How select different type views in MM01

Hi abapers,
plz tell me how to handle diffrent different type views in MM01.
thanks in addvance

hi,
After the recording, you might see, that the selection of the views is
monething like that: SELECTION(3) = 'X'
SELECTION(4) = 'X'
SELECTION(5) = 'X'
you have to address the selected
views by their index in the table.
in Tcode SHDB, record MM01 transaction only for the MRP1 MRP2 MRP3 and use the same code in ur BDC prog.
Look at the below code for MM01
http://www.sap-img.com/abap/example-how-views-are-dealt-in-bdc.htm
You have + button in the MK01 trasaction code, if you press that you
can enter new record in the table control, so every time, enter a New
record and press that + button, then enter the record then press + , like this we need to handle the table control
Check the links -
bdc -- mm01
MM01 BDC
mm01
example:
Example how Views are dealt in BDC
Can any body tell me some views of MM that we can use in BDC?
***This is a BDC for Semi finished Materials*******
report ZBDC_SEMIFIN
       no standard page heading line-size 255.
include bdcrecx1.
Tables: Mara,"General Material Data
        mard,"Storage Location Data for Material
        mvke,"Sales Data for Material
        Makt,"Material Descriptions
        marc,"Plant Data for Material
        mbew,"Material Valuation
        rlgrap."Program Fields/Screen Fields for SAPLGRAP
Data: begin of ITAB occurs 0,"Internal table for Semi-Finished Material
Initial data
      matnr like mara-matnr, "Material Code
      mbrsh like mara-mbrsh, "Industry Data
      mtart like mara-mtart, "Material Type
Org Data
      Werks like marc-werks, "Plant
      lgort like mard-lgort, "Storage Location
      vkorg like mvke-vkorg, "Sales Orgnization
      vtweg like mvke-vtweg, "Distribution Chanel
Basic 1
      Maktx Like makt-maktx, "Description
      meins like mara-meins, "Uom
      matkl like mara-matkl, "Material Group
      BISMT LIKE MARA-BISMT, " Old Material Number
      spart like mara-spart, "Division
      brgew(7),"like mara-brgew, "Gross Weight
      gewei like MARA-GEWEI, "Weight Unit
      ntgew(7)," like mara-ntgew, "Net Weight
Purchasing
       MAKTL LIKE MARA-MATKL, "Material Group
       ekwsl like MARA-EKWSL, " Purchasing Value Key
       ekgrp like MARC-EKGRP, " Purchasing Group
Mrp 1
      disgr like MARC-DISGR, "Mrp Group
    ekgrp like MARC-EKGRP, "Purchasing group
      dismm like MARC-DISMM, "Mrp Type
      dispo like MARC-DISPO, "Mrp Controller
      disls like MARC-DISLS, "Lot Size
      BSTMI like MARC-BSTMI,
      BSTMA like MARC-BSTMA,
      BSTRF like MARC-BSTRF,
      BSTFE like MARC-BSTFE,
Mrp 2
      beskz like MARC-BESKZ, "Procurement type
      lgpro like MARC-LGPRO, "Production Storage Location
      dzeit(3),"like MARC-DZEIT, "In house Production time
      plifz(3),"like MARC-PLIFZ, "Planned delivery time
      fhori(3),"like MARC-FHORI, "Sched margin key
      eisbe like MARC-EISBE, "Safety stock
Mrp 3
      PERKZ LIKE MARC-PERKZ,
      vrmod like MARC-VRMOD, "Consumption mode
      vint1(3)," like MARC-VINT1, "Backward Consumption period
      vint2(3),"like MARC-VINT2, "Forward Consumption period
      mtvfp like MARC-MTVFP, "Availability Check
Mrp 4
      sbdkz like MARC-SBDKZ, "Individual/ Collective
      SAUFT like MARC-SAUFT, "Repetitive Manufacturing
      SFEPR like MARC-SFEPR, "REM Profile
Work Scheduling View
      ausme like MARC-AUSME, "Unit of issue
      FEVOR LIKE MARC-FEVOR, "Production Scheduler
      SFCPF like MARC-SFCPF, "Production Scheduler Profile
      umren(5)," like RMMZU-UMREN, "Val for base uom
      umrez(5) ,"like RMMZU-UMREz, "Value for uo issue
Accounting 1
      bklas like MBEW-BKLAS, "Valuation Class
      vprsv like MBEW-VPRSV, "Price Control Indicator
      verpr(7)," like MBEW-VERPR, "Value/Price
      STPRS like MBEW-STPRS,
*COSTING
     EKALR LIKE MBEW-EKALR," With qty str
     LOSGR like MARC-LOSGR, " Costing Lot size
    end of ITAB.
Data: W_record type I, "Record Allready exists.
      w_trecord type I. "Total record processed
start-of-selection.
perform upload.        "Upload Data from Text File
Perform Open_group.    "Create a session
clear : w_record,w_trecord.
perform semi. "Create Semi Finish Materials
if w_trecord gt 0 or w_record gt 0.
perform batch_job.
endif.
perform close_group.   "Close session
FORM SEMI.
loop at ITAB.
Check for material in master        select single * from mara where matnr eq ITAB-matnr.
         if sy-subrc ne 0.
          w_trecord = w_trecord + 1.
*Initial Screen
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MTART'.
perform bdc_field       using 'BDC_OKCODE'
                              '=AUSW'.
perform bdc_field       using 'RMMG1-MATNR'
                              ITAB-MATNR.
perform bdc_field       using 'RMMG1-MBRSH'
                              'M'.
perform bdc_field       using 'RMMG1-MTART'
                              'HALB'.
**********************Views*********************************
*Select Views
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(17'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                               'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(09)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(12)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(13)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(14)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(15)'
                              'X'..
perform bdc_field       using 'MSICHTAUSW-KZSEL(17)'
                              'X'.
**********************Views*****************************
*perform bdc_dynpro      using 'SAPLMGMM' '0070'.
*perform bdc_field       using 'BDC_CURSOR'
                             'MSICHTAUSW-DYTXT(01)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_dynpro      using 'SAPLMGMM' '0070'.
*perform bdc_field       using 'BDC_CURSOR'
                             'MSICHTAUSW-DYTXT(17)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'MSICHTAUSW-KZSEL(17)'
                             ITAB-KZSEL_17_011.
*perform bdc_dynpro      using 'SAPLMGMM' '0070'.
*perform bdc_field       using 'BDC_CURSOR'
                             'MSICHTAUSW-DYTXT(01)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_dynpro      using 'SAPLMGMM' '0070'.
*perform bdc_field       using 'BDC_CURSOR'
                             'MSICHTAUSW-DYTXT(13)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '=ENTR'.
*perform bdc_field       using 'MSICHTAUSW-KZSEL(13)'
                             ITAB-KZSEL_13_012.
*Org Data
perform bdc_dynpro      using 'SAPLMGMM' '0080'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-LGORT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-WERKS'
                              ITAB-WERKS.
perform bdc_field       using 'RMMG1-LGORT'
                              ITAB-LGORT.
*Basic 1
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP09'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARA-MATKL'
                              ITAB-MATKL.
perform bdc_field       using 'MARA-BISMT'
                              ITAB-BISMT.
perform bdc_field       using 'MARA-SPART'
                              ITAB-SPART.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              'NORM'.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-NTGEW'.
perform bdc_field       using 'MARA-BRGEW'
                              ITAB-BRGEW.
perform bdc_field       using 'MARA-GEWEI'
                              ITAB-GEWEI.
perform bdc_field       using 'MARA-NTGEW'
                              ITAB-NTGEW.
*Purchasing
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP12'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARC-EKGRP'
                              ITAB-EKGRP.
perform bdc_field       using 'MARA-MATKL'
                              ITAB-MATKL.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-EKWSL'.
perform bdc_field       using 'MARA-EKWSL'
                              ITAB-EKWSL.
*MRP 1
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP13'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARC-EKGRP'
                              ITAB-EKGRP.
perform bdc_field       using 'MARC-DISMM'
                              ITAB-DISMM.
perform bdc_field       using 'MARC-DISPO'
                              ITAB-DISPO.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-DISLS'.
perform bdc_field       using 'MARC-DISLS'
                              ITAB-DISLS.
IF ITAB-DISLS EQ 'EX'   .
perform bdc_field       using 'MARC-BSTMI'
                              ITAB-BSTMI."MIN LOT SIZE
perform bdc_field       using 'MARC-BSTMA'
                              ITAB-BSTMA."MAX LOT SIZE
perform bdc_field       using 'MARC-BSTRF'
                              ITAB-BSTRF."RNDING
ELSEIF ITAB-DISLS EQ 'FX'.
perform bdc_field       using 'MARC-BSTFE'
                              ITAB-BSTFE.
ENDIF.
*MRP 2
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP14'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARC-BESKZ'
                              ITAB-BESKZ.
perform bdc_field       using 'MARC-LGPRO'
                              ITAB-LGPRO.
perform bdc_field       using 'MARC-DZEIT'
                              ITAB-DZEIT.
perform bdc_field       using 'MARC-PLIFZ'
                              ITAB-PLIFZ.
perform bdc_field       using 'MARC-FHORI'
                              ITAB-FHORI.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-EISBE'.
perform bdc_field       using 'MARC-EISBE'
                              ITAB-EISBE.
*MRP 3
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP15'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARC-PERKZ'
                              ITAB-PERKZ.
perform bdc_field       using 'MARC-VRMOD'
                              ITAB-VRMOD.
perform bdc_field       using 'MARC-VINT1'
                              ITAB-VINT1.
perform bdc_field       using 'MARC-VINT2'
                              ITAB-VINT2.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-MTVFP'.
perform bdc_field       using 'MARC-MTVFP'
                              ITAB-MTVFP.
*MRP 4
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP17'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARC-SBDKZ'
                              ITAB-SBDKZ.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-SFEPR'.
perform bdc_field       using 'MARC-SAUFT'
                              ITAB-SAUFT.
perform bdc_field       using 'MARC-SFEPR'
                              ITAB-SFEPR.
*Work Scheduling
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP24'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-SFCPF'.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARC-FEVOR'
                              ITAB-FEVOR.
perform bdc_field       using 'MARC-LGPRO'
                              ITAB-LGPRO.
perform bdc_field       using 'MARC-SFCPF'
                              ITAB-SFCPF.
perform bdc_field       using 'MARC-DZEIT'
                              ITAB-DZEIT.
*Check for Conversation Factor
          if ITAB-MEINS ne iTAB-ausme and iTAB-umren gt 0
                                      and iTAB-umrez gt 0.
          perform bdc_dynpro      using 'SAPLMGMM' '0510'.
          perform bdc_field       using:
                                  'BDC_OKCODE'    '=ENTR',
                                  'RMMZU-UMREN'   ITAB-UMREN,
                                  'RMMZU-UMREZ'   ITAB-UMREZ.
        endif.
perform bdc_field       using 'MARC-LGPRO'
                              itab-LGPRO.
perform bdc_field       using 'MARC-DZEIT'
                              itab-DZEIT.
*Accounting
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP26'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARA-SPART'
                              ITAB-SPART.
perform bdc_field       using 'BDC_CURSOR'
                              'MBEW-STPRS'.
perform bdc_field       using 'MBEW-BKLAS'
                              ITAB-BKLAS.
perform bdc_field       using 'MBEW-VPRSV'
                              ITAB-VPRSV.
perform bdc_field       using 'MBEW-STPRS'
                              ITAB-STPRS.
IF ITAB-VPRSV = 'S'.
perform bdc_field       using 'MBEW-STPRS' "FILLS STD PRICE
                              ITAB-VERPR.
ELSEIF ITAB-VPRSV ='V'.
perform bdc_field       using 'MBEW-VERPR' "FILLS VALUE
                              ITAB-VERPR.
ENDIF.
*Cost Estimate
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-PRCTR'.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MBEW-EKALR'
                              ITAB-EKALR.
perform bdc_field       using 'MARC-LOSGR'
                              ITAB-LOSGR.
perform bdc_transaction using 'MM01'.
REFRESH BDCDATA.
    else.
         w_record = w_record + 1.
    endif.
ENDLOOP.
ENDFORM.
form Upload.
CALL FUNCTION 'UPLOAD'
EXPORTING
   CODEPAGE                      = ' '
   FILENAME                      = ' '
   FILETYPE                      = ' '
TABLES
    DATA_TAB                      = ITAB
EXCEPTIONS
   CONVERSION_ERROR              = 1
   INVALID_TABLE_WIDTH           = 2
   INVALID_TYPE                  = 3
   NO_BATCH                      = 4
   UNKNOWN_ERROR                 = 5
   GUI_REFUSE_FILETRANSFER       = 6
   OTHERS                        = 7.
ENDFORM.
form batch_job.
    uline.
      format color col_heading.
        if w_trecord gt 0.
        Write:/ 'Background Job has been Created for ',
              w_trecord right-justified, 'Semi-Fin', 80 ''.
        write:/ 'Please follow the following steps to run this job',
                                                           80 ''.
        write:/ 'as listed below.', 80 ''.
        format color col_normal.
        skip.
        write:/05 '1.Goto Transaction SM35', 80 ''.
        write:/05 '2.Select your Session Name', 80 ''.
        write:/05 '3.Click On Execute Button', 80 ''.
       endif.
       if w_record gt 0.
         format color col_negative.
         write:/ w_record ,'records already existed', 80 ''.
         format color off.
       endif.
    uline.
endform.

How hide views in MM01

Hello Experts,
i am new to SPRO settings
I have a requirement to hide the views in MM01 transaction.
i want to hide MRP views and and some other views.
Could anybody tell me how to acheive this.
Thanks
Note : Subject is FAQ,please search forum before posting.
Edited by: Jeyakanthan A on Dec 25, 2011 12:13 AM

> I have a requirement to hide the views in MM01 transaction.
>
> i want to hide MRP views and and some other views.
Hi, From T-code OMS2 select the material type for which you do not want the MRP view, double click on the material type & deselect the MRP (all 4 MRP views are connected to these tab only) tab for that material type & save. Test & check.

How to restrict a User to access only 2-3 views in MM01/MM02 ???

Hi,
Can anyone tell me how can I restrict a User to access only 2-3 views in MM01/MM02 and also the User should not be allowed to change the View selection by clicking on the Select Views button ?.
Regards,
Lucky

Hi Prashant,
Can this only be done through changes in Authorization Objects ? Is not there any setting which can be done in SPRO for this ?
Hi Sheshagiri,
I could not exactly understand how the access to MM Views can be restricted to User through TCode OMT3B i.e. in SSeq. 01 and Screen 07 ? Subscreen 2154 is for Mat. Groups ? Please explain your answer in detail.
Regards,
Lucky

Help for creating classification view in mm01

hi guys can anybody help on creating classification views in mm01 using bdc recording i need a step by step procedure . since when i tryed in mm01 there are filds like class name i dont know where all these data's to find one more thing is i was asked to create classification view using bdc recording ...please help me with some programs if u have

Hi,
You need to use the BAPI 'BAPI_OBJCL_CREATE' to create characteristics for a material.
The characteristics are need to be passed in the table ALLOCVALUESCHAR.
If you do not know the values for a particular characteristics then you canmake use of FM
BAPI_CLASS_GET_CHARACTERISTICS and BAPI_CHARACT_GETDETAIL to get the values.
Regards,
Ankur Parab

Deactivate the WM execution view in MM01

hi,
how to deactivate the WM execution view and WM packaging view in material master in MM01...i already checked material types in SPRO the above mentioned views are not there....how to deactivate the above views?
Thanks
Muthuraman.D

I hope you changed the Material type after you created the material. You can only put a deletion flag for the Warehouse and the storage type.
If you want to hide the views for a particular user, then you can create a screen sequence and assign to those users.
Step1: In OMT3B, create a screen sequence by copying from the existing one.
Then delete the WM1 and WM2 from the data screens.
Step2: In OMT3E, Screen Sequence Control - Enter the screen sequence you created - assign the user.

URGENT: Supress Views in MM01/02/03

Hi,
We currently have a request to implement a restriction to the MM01/02/03 transactions in terms of view accessability. This means that depending on a new authorization object we have to make certain views invisible or at least inaccessible.
(The following is a short description of the request, so please refer to the bottom section for the problem itself.)
The reason for this is, that our customer has several plants whose workers should have restricted access to material views. This means they should have access to all plants' views except for some specific views like the costing views which they should only be granted access if they are authorized.
To make it a bit clearer, a short example.
A worker is assigned plant 1000, the material has views for plants 1000, 2000, 3000. The worker now is allowed to access the plant view, storage view etc. for all 3 plants. However, he should only be able to access the costing view for plant 1000 but not 2000 and 3000.
From what I know about authorization in the MMxx transactions we only can grant or deny access to all views for a specific plant or for all views of a specific type (i.e. either all or none of the views for 2000 and 3000 or costing views in general (for all plants)).
That's why we need a new authority object.
The problem:
We wanted to check the above described authority object in the MMxx transactions and based on the result grant or deny access to specific views. We tried to do this by setting or deleting function codes that drive view display.
The problem now is that according to our developer, the standard SAP authority objects override our custom object, so that if the user is allowed to see all views of a type and all views for a given plant, he will be granted access to all those views. To achieve our goal we'd have had to change the standard authority checks in all depending programs which would be infeasible.
Yet, there might (and I'm sure there must) be a way to tell the standard programs not to display a certain view in a feasible manner. I could imagine that there either is a list of function codes that we can alter based on our custom authority check or change something else that influences view display.
So does anybody of you know how to accomplish this or at least where to look further? Any help will be deeply appreciated.
Thank you very much in advance.
Thomas Göttlich

Thank you for your answer.
Unfortunately this isn't a solution to the problem since as far as I know you the user settings only allow you to preselect screens. Other functionality like changing the screen sequences / screens that a user may see are not sufficient either.
The problem is that a user potentially may have access to ALL the screens. In fact the authority check has to work on a combination of plant/screen, so a specific screen may be accessible for plant A but not for plant B, depending on the user. And from what I know you can't do those restrictions in customizing.

My apple TV will not show my iPhotos travel photos in sequence. I set up a sequence of photos that STAY in sequence when viewing in iPhoto on my iMac, but they do not show in sequence when my Apple TV shows them on my TV screen. My Apple TV is MC 572C/A

My Apple TV will not show my photos in iPhoto on my iMac in the same sequence of images that I can see when viewing the iPhoto photos on my iMac. This is especially frustrating when I try to show my travel pictures in sequence on my TV. I have to resort to showing them on my iMac which defeats the principle purpose for purchasing my MacTV. Does anyone have a solution?
My Apple TV is Model MC 572C/A and the software is 5.2.1 (6025)
My iMac is Mac OSX version 10.7.5
THANKS!
Doug May

I can't recall whether slideshows are ordered by title or date, but you can manually re-arrange the albums in iPhoto, then batch change them once you have the order you want.

Sequencing of views in MM01

Similar Messages

Maybe you are looking for