Sequential BMP files

Greetings,
I used an application that created a HD video file for me as sequential bmp files. I know AVID will recognize sequential files and import them as one piece of video, will FCP do the same? There are 4000 of these files, each representing a frame, so cutting them into a sequence one at a time is not something I look forward to doing.
Thanks for the help!

As long as they are properly numbered - i.e. image_0001.bmp through image_4000.bmp, FCP will play them. Set your default still image duration to one frame (0:00:00;01) before you import them into FCP and, once they are in the browser, select all and drop them on the timeline.
Recognize this will take up a fair degree of system resources as FCP treats them as still images not video.
A better way to go is to import the images into QT Pro as an image sequence and export it out as a video file. Then, import that into FCP. Things will work MUCH faster.
Good luck,
x

Similar Messages

Save an 16 bits grayscale image in a bmp file

Hello,
I need to save a bmp file using an I16 grayscale picture.
I already did the following VI that saves the picture in bmp but the colors are not good : there is only blue levels.
I think there is a problem with the type of data that feed "array to color image" or with the colorscale but i don't manage to find where.
Hope you can help me.
Tank you.
Ben

Hi
The arraytocolorimage expects U32 because expects a RGB color, try this instead of the "toU32"
Rodrigo Cuenca
www.cidesi.com

Issue in creating bmp file with cl_igs_chart_engine class

Hi All,
I want to populate dynamic graphic in a smartform.
Im using cl_igs_chart_engine class to produce a GIF format of a chart.
Then im trying to use class cl_igs_image_converter to convert that gif into a bmp format using INPUT = 'image/gif' and OUTPUT = 'image/x-ms-bmp'.
but it returns with system failure exception in
call function 'PIGFARMDATA' .
There is no error happening in case of converting any graphic format(bmp,tiff) to gif format but system failure exception occurs while trying to convert into bmp format.
Appreciate your inputs.
Cheers,
Vikram

Hi,
I have taken a copy of program GRAPHICS_IGS_CE_TEST and made changes in it. In std program, file type in customizing XML is 'PNJ'. I changed it to 'BMP' as per your suggestion. However, in the
call method l_igs_ce->execute
exceptions
others = 1.
there is a call function for 'PIGFARMDATA'. Im getting exception error( sy-subrc = 2) for system failure.
This program works fine if the file type in customizing XML is 'GIF' or 'PNG' but not for 'BMP' file types.
Please advice.
Cheers,
Vikram

How to open a BMP file in a JLabel???

Hi all,
My problem is that I want to set a BMP file as icon of a JLabel, but the Class ImageIcon doesn't support BMP files.
Thank you all.
Marco Aur�lio
from Brazil
we'll win the FIFA World Cup!!

The easiest way to do that is to get a graphics package that can convert a BMP file to a JPG file. Some versions of Microsoft Paint will do that, but you should be able to find another one if you need it.
I hope Brazil wins, but if they don't it will be because the referees give it to Korea.

Error while uploading *.BMP file using SE78

Hi
I am trying to upload a BMAP file from presentation server onto the document server using SE78.
I am facing an error saying
"This is not a *.BMP file(they begin with <> "BM")"
Message no. TD874
I have the necessary company logo in this file and I want to put this in the sapscript.
Is there some formatting that needs to be done to the bitmap file before importing in SE78.
Please help!
Thanks
Bala

hi
Convert BMP from <b>Command prompt using ren command</b>
then follow below process
Go to transaction SE78.
Follow the path given below (on the left windows box) :-
SAPSCRIPT GRAPHICS --> STORED ON DOCUMENT SERVER --> GRAPHICS --> BMAP
Enter the name of the graphics file on the right side and Go to the menu GRAPHIC --> IMPORT
The program is RSTXLDMC, the logo needs to be save in .TIF format.
Use transaction SE78 to inmport graphics to SAP.
In the form painter, you can either include directly to the form using menu Edit->Graphic->Create or using the INCLUDE statement in a window.
To use an INCLUDE stanment, goto into the woindow script editor and use menu Include->Graphic. The include can look like this for a bitmap:
/: BITMAP MYLOGO OBJECT GRAPHICS ID BMAP TYPE BMON
regards
vinod

Read BMP File Requires Absolute Path

I noticed something today regarding the Graphics Formats, Read JPG File, Read PNG File and Read BMP File vi's. It seems that when reading a JPG or PNG file, a relative path is OK, but when reading a BMP file, an absolute path is required. When the path only contains the filename, it returns:
Error 1430
"Open/Create/Replace File in Read BMP File Data.vi->Read BMP File.vi->ReadImageFileTest.vi"
I tried a simple test that uses either the relative or absolute path, trying to read 3 different files in the same directory as the VI. Only the Read BMP File errors. Of course, the simple work around is to always use the full pathname to a file. Is this only on my system? Is this a known bug or feature or expected behavior?
I'm using LabVIEW 8.2 on Windows XP.
Thanks!
B-)
Message Edited by LabViewGuruWannabe on 11-05-2007 11:06 PM
Attachments:
ReadImageFileTest-FPgood.PNG ‏30 KB
ReadImageFileTest-FPbad.PNG ‏26 KB
ReadImageFileTest-BD1.PNG ‏48 KB

Missed this on the first post:
Message Edited by LabViewGuruWannabe on 11-05-2007 11:10 PM
Attachments:
ReadImageFileTest-BD.PNG ‏48 KB

Converting multiple bmp files to PDF using acrobat 7.0 from DOS prompt

Hi,
I have a requirement to convert multiple BMP files in a folder to one PDF.
I can use multiple file conversion option in acrobat to combine and convert them to one PDF .. but I have 2000 such folder to conver to PDF.
PDF should be name after the folder name.
Is there a to automate this in acrobat.. or can we run this conversion from DOS prompt using commands.. so that I can create a bat file and have them converted. Pls let me know.
Thanks
Pugazh

I have not tried BMP files, but do JPeg, GIF, TIFF, and PNG files regularly. I simply open Acrobat, then select the graphics files in explorer and drag & drop to Acrobat. I then organize the graphics if needed (using the pages tab) and save to a PDF.

Want to display a .bmp file in reports

Hello there
I am trying to display a .bmp file on reports which I think is simple.the main problem is that After making changes to report we transfer the report file to Unix and then generate the report in unix and print it and in that process the report stops printing.
Thanks in advance.
Jha

make sure SOURCE FILENAME is valid in your LINK FILE pointing to the image.bmp
Report compiles nicely even with wrong source filename, only when opening layout editor an error message will appear.

Hp6500A plus. When I scan a document to PDF it is produced as a BMP file.

My scan settings are correct and have been saving correctly. All of a sudden the scanner starts producing a BMP file instead of a PDF file. It doesnt matter what i do it will not work correctly. I have switched off eveything , retstarted , checked for updates and it does not seem to correct. Any help out there ?

Hi @avjohn,
I see that you are experiencing issues saving PDF files, they are saving as a BMP file instead. I would like to help.
Run all the Windows Updates and Adobe Updates.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it.
Find and fix common printer problems using HP diagnostic tools for Windows?
Try scanning again.
If the issue persists, uninstall and reinstall the printer software.
Uninstalling the Printer Software.
HP Officejet 6500A Plus e-All-in-One Printer - E710n Drivers.
Select your operating system, click next and click on the software to download and install.
Try and scan again.
Update the printer's firmware if you are still havinging issues. HP Officejet 6500A Plus e-All-in-One Printer - E710n Drivers. Select your operating system, click next, click the link for firmware.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
What application are you scanning with?
How is the printer connected? (USB/Ethernet/Wireless)
Please provide in detail the results if you are still having issues.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to call GOS(Generic Object service) attachment ( BMP file ) into SAP

How to call GOS(Generic Object service) attachment ( BMP file ) into SAP script
Example: MM02 Service object there attaching the bmp file the same file i need to call script based on the material number
Please provide the procedure and coding.
Thanks in advance
Raju

Hi,
The following link may be useful to u.
help.sap.com/printdocu/.../BCSRVOBS.pdf

Load .bmp file into BLOB column in 9i - how to?

Hello all,
How do I update a table with a BLOB column with a .bmp file in 9i? I tried using the DBMS_LOB package but got a ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275 (and since there is more native support in 9i, I'm not sure I need it to begin with). We do not have Inter-Media. tia [email protected]

Hi,
please, search a bit on the forum before do a question:
Just searching by "upload blob pdf" ...
How to batch upload PDF files into database BLOB
Regards,
Jose.

How do I read in a .bmp file?

How do I read in a .bmp file to a program that uses
an ASCII file? Is it possible to change the file to ASCII
prior to reading the file into the program?
Thanks for all your help!

MIME?

Drag an image to the desktop saves as a bmp file

dragging an image from a webpage to Windows Explorer or compliant program (xplorer2 or Zoner, or FastStone Image or desktop etc) saves as a .bmp file (mostly!). Invariably *.bmp files are large files and since the original format would be jpg or png I have to convert back to these formats.

It’s the single worst feature of Firefox Mozilla.
What the point of having private browsing if this is going on.
You find the files in (user name)/appdata/local/temp
its a hidden folder. when i looked i 3gigs of bmp files
that not cool at all!! gerrrrrrrrrrrrrrr

.bmp files

Hello, I am currently starting on a project that requires me to modify the binary structure of bitmap files. I will be using Java to create a program that will need to be able to open bitmap files that have had their binary data corrupted in some known way, modify the binary data to repair the bmp files, and save a new, fixed, bmp file that can be viewed.
I have researched the bmp file format a little bit. This website seems to be a good reference: http://local.wasp.uwa.edu.au/~pbourke/dataformats/bmp/
My question is, how would I open and save a bmp in its binary form in Java? Whenever I've worked with image files, I've just used Java's built-in imageio library to open and save them.
For example, the aforementioned website describes the file header being structured like this:
typedef struct {
   unsigned short int type;                 /* Magic identifier            */
   unsigned int size;                       /* File size in bytes          */
   unsigned short int reserved1, reserved2;
   unsigned int offset;                     /* Offset to image data, bytes */
} HEADER;(That's some C code from the website that defines the structure of the header)
How would I go about getting that data in Java, and then continuing on to get the data from the "info header" and finally the pixel data?
Edited by: etgohomeok on Mar 27, 2009 1:35 PM
Edited by: etgohomeok on Mar 27, 2009 1:38 PM

There are actually [4 or 5 versions of bmp|http://www.fileformat.info/format/bmp/egff.htm]. The default bmp image reader
ImageIO.read(/*someImageFile.bmp*/);can read up to and including version 3 (and can maybe read version 4). The code above is how you would normally read a bmp file, but you stated this
>bitmap files that have had their binary data corrupted in some known way
If the actual file is corrupted then you probably won't be able to read it with the default bmp image reader. So you may have to write your own bmp image reader which takes into account the corruption.
This link goes through the process of creating a simple ImageReader/ImageWriter/SPI Service for a hypothetical format called "MyFormat." Give it a read and use the [first link|http://www.fileformat.info/format/bmp/egff.htm] as a guide to decoding the bytes.

How to save 4 bit .bmp file in photoshop

I saved gif file to 4 bit bmp file, but the next time I try doing it I cannot, the photo shop does not support it. If I have to do I have to do it I have to close photoshop and open the application once again to save another gif file to bmp. I need a quick solution because there are 1000's of icon that needs to be saved to 4 bit bmp files. I need help please... Thanks

No, it is not possible.
PNG doesn't support layers.
A few apps stuff their own private data into PNG to hide layer data, but well, it's private undocumented data.

Sequential BMP files

Similar Messages

Maybe you are looking for