Serial data tab page missing during Goods Receipt for Mvt type 501

I have created and asigned the Seria data profile in plant data/Storage 2 of the material master record. Now i want to do the Goods receipt of this material with Mvtr type 501 w.r.t any documents for 5 no's and want the serial number to be createdment. I also have made relevant settings for automatic serial number and equipemnt number synchr, but wen i m in MIGO--Goods Receipt OtherMvt type 501 and enter, the serial data tab page is missing..
How can I activate this tab page....Any steps missing....
Can some one throw lights on this.....
Refered relevant threads but not much useful to my query....
Thanks
Murad Shaikh

Try 501 with MB1C, OR
Check through Path SPRO -> Sales and Distribution -> Basic Functions -> Serial Numbers -> Determine Serial Number Profiles -> Select Profile 'MM' & double click on Serializing procedure at left & maintain obligatory(03) for procedure MMSL i.e. Maintain goods receipt and issue doc. Also press F1 in Serial Number Usage to read the usage.

Similar Messages

Error during Goods Receipt for Production Order

Hi All,
When using MIGO to post Goods Receipt for a Production Order, I got a customize message saying that the posting is only available between 2010.08.25 to 2010.08.27. I have checked in Business Add-in using SE19 but there are no implementation present. I know that in Logistic Verification MIRO there is a transaction OMRM to set messages. I would like to ask is there anything similar for MIGO.
Or is there any other place in Configuration which allows me to add these Customize message.
Thanks.
Edited by: jamison2004 jordan2004 on Jul 9, 2010 9:09 AM

Hello Jiaul,
Sorry I may have mislead you. The actual error message is "Goods Receipt for Production Order XXXX can only be made on 2010.08.25 to 2010.08.27". These two dates are the Start Date and FInish Date for the Production Order in CO03,
The Basic Start Date for the current Production Order is 2010.08.25
The Basic Finish Date for the current Production Order is 2010.08.27
I think what it means is that you can only Post Goods Receipt for the Production Order only after the Basic Start Date of the Production Order. Do you know where I can find the configuration for this message?
Thanks

PIR reduction during goods receipt for strategy 10

Hi Experts,
I am using the net requirement planning strategy. i.e strategy 10. My requirement is I wanted the PIRs to be reduced when do goods receipt for the production orders.
I know this is possible in strategy 11. But how how do it in strategy 10.
Regards
Prathib

Hi Ayethebing,
What you mentioned in correct. System may do the wrong net requirement calculation. Let me explain what is my requirement.
I have planning plant, where I get the sales orders and the PIR from Depots. And the production for all these quantities should be done in production plant. I need to do the goods receipt in the production plant itself first and do a plant to plant material transfer to planning plant.
But all the control of production should be with production plant. So I cant use the production in alternative plant because in this case i need to convert planned order in planning plant and while doing goods receipt the stock directly updates in planning plant.
So I was thinking of loading the PIRs in the production plant directly and use strategy 10. But since the sales orders wont come to production plant, the PIRs wont recduce at all. So thought of thinking about reducing PIR during goods receipt.
But I realized from what you explained, it would lead to wrong PIR calculation. Full mark to you.
Now Iam thinking the solution in a different way. Please give me your inputs
Iam creating a recusrive BOM in planning plant and I will assign special procurement key 70. i.e withdrawal from alternative plant. I will assign alternative plant as production plant.
So when I run MRP in planning plant for the main product, I will get dependant requirement created in the production plant for the main material as I created the recursive BOM in planning plant.
But Iam having only one issue to be resolved here as I understand. The planned order created in the planning plant during MRP is convertible. Can I make it non convertible some how even if Iam having bill of material?
Thanks in advance for your valuable inputs
Regards
Prathib

Excise tab page not displayed during goods receipt for material.

Dear All,
The issue is we are doing GR for a PO in MIGO.Now the excise tab page is displayed in case of all other matl except for one.The matl type is manufacturing matl for this particular matl.I have checked all the settings in J1ID, also checked the tax code they are ok.can anyone guide me with any other possible solutions to this.
Thanks in advance,
Akshay

Same problem we have faced after implementation of budgetory changes.
SAP recommanded changes in program.
Check with sap support.
Regards
Vijay

Early Inspection for a Goods Receipt for production order

Dear Experts,
This is with respect Early Inspection for a Goods Receipt for inspction type 04.( 03 is also active in material master)
We made partial confirmation 250 qty for production order using t code co11n ( total qty of production order is 1000).
made the usage decision with an acceptance and posted all open stocks. to unrestricted.
Now in second partial confirmation prodn order of 250 qty was made . This suppose to be rejected . but sytem will add this 250 qty directly to unrestricted stock . how to over come this .
Regards
Sandeep

Don't make the UD until all stock has been receipted?
You basically approved the batch. So why wouldn't the system put the stock to unrestricted?
Why would you make a UD when you still have stock to be posted anyway? You can post stock without without making a UD so why not just post some if you need it, and wait on making the UD?
Craig

Requirement to maintain additional serial number during Goods Receipt

We have a requirement to maintain an additional field external serial number while doing Goods Receipt for a PO using movement type 101. This requirement is in addition to the create serial number
automatically. Which is enabled already.
Can anybody please let me know how to take care of this requirement.
Regards,
Chandra Kumar

BADI available MB_MIGO_BADI to take care of the requirement for additional custom field

Quality Management During Goods Receipt (Inspection Lot)

Hi all,
>>>>>>>>>>>>
REQUIREMENT
<<<<<<<<<<<<
I have a requirement that i need to write an interface program which will receive a file from external agency (manufacturer) and process goods receipt until inspection results. The following steps need to be taken care of;
1) Create a equipment (Utilities - It is an unique identifier for each unit of the material).
2) Do Goods Receipt for the PO with the equipment numbers created.
3) Create Inspection Lot for the material document created during the GR for each equipment number.
4) Execute Inspection Result.
>>>>>>>>>>>>
INFO NOW
<<<<<<<<<<<<
Inspection lot can be created from MIGO directly by SPRO config and MM master data maintenance.
>>>>>>>>>>>>
DONE
<<<<<<<<<<<<
Called BAPI to create Equipment.
Called BAPI to create Goods Receipt.
Inspection Lot Settings to create lots during MIGO
1) New Inspection Type Created as SG1 at SPRO->QM->Quality Inspection->Inspection Lot Creation->Maintain Inspection types. The maintenance is a copy of type 01.
2) Assign Inspection Type to Lot Origin at SPRO->QM->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection Types. SG1 is maintained against lot origin 01 with variant 01.
3) Set Default values for SG1 at SPRO->QM->Quality Inspection->Inspection Lot Creation->Define Default Values for Inspection Type with parameters same as for 01.
4) In Material master for the record set the inspection setup in the quality management tab. put SG1 as active and preferred. Also set Post to insp Stock, Insp with task list, Auto Assign, Skips allowed, Serial Numbers poss, Control Insp lot as For each Material Doc Item.
I have to kow how to select the Inspection Plan for the lot and thus set the status of lot to released and get it ready for results.
I also have BAPI ready for Inspection Result.
>>>>>>>>>>>>
TESTING
<<<<<<<<<<<<
I have tested it and was working fine till last thursday. I have the above mentioned settings even now in the system. Can there be anything else which the functional consultants would have change that affected the process. Anyways now the inspection lot is not getting created for the Inspection during MIGO and I am really struggling to find the exact reason.
For your info, I am working mostly on Utilities and so do not have much idea about the quality management stuff.
>>>>>>>>>>>>
QUESTION
<<<<<<<<<<<<
Why the inspection lot is not getting created during MIGO for my scenarion?
How to select the inspection plan in the program?

deleted

Error during goods receipt of Finished goods for production order

hi friends
pls help me iam struggle this issue and mentioned the issue .
when i do goods receipt for production order system getting error like
No price could be determined for material/batch FG/ plant ZTP
     Message no. CK 465
Diagnosis
     The system could not calculate a price for material/batch FG/ in plant
     ZTP for valuation view 0, because none of the valuation strategies in
     valuation variant 007 was successful.
System Response
     User-defined error management enables you to specify whether the message
     is an error message, a warning message or an information message.
     o   If you have defined the message as a warning message or an
         information message, the costing item will be entered in the cost
         estimate with a value of zero.
If you have defined the message as an error message, the cost
estimate contains an error or errors.
-   In the case of a material cost estimate, the system sets the
    status KF.
-   If it is a cost estimate without quantity structure, or base
    object cost estimate (that is, a unit cost estimate), the
    system cannot proceed with costing until you have corrected the
    errors.
If the system issues a termination message, the cost estimate cannot
be processed, and processing is terminated.
procedure
    o   Check the master data for material/batch FG/ in plant ZTP.
    o   If you have authorization for Customizing, check the valuation
        strategy for materials in valuation variant 007.
    Note
    If the message is a warning message or an information message, there is
    a danger that materials with errors will be ignored by the system.
    If, because of this, you issue a warning message and at the same time
    include materials with a zero value in cost estimates, you can make the
    following settings for these materials in the costing view of the
    material master:
1. Enter a very low price in the planned price 1, 2 or 3 fields
      manually, for instance 0.01 USD. These prices are used for costing
      purposes only; they are not read by other applications.
2. Enter the highest price unit possible, for example 10000.
      Note: If you enter a new price unit that is higher than the costing
      lot size, the system increases the costing lot size accordingly.
3. Change the valuation strategy, such as strategy 4, where you could
      enter the planned price field in which you entered the low price.
      The system now costs as follows:
      Using the valuation strategy, the system finds planned price 1, 2 or
      3. Due to the low price and high price unit, the system rounds the
      value to zero. However, the cost estimate still obtains status KA
      (free of errors), and no error message is issued.
      This procedure can be used for all materials that have caused error
      message CK465 to be issued.
with regards
dinesh
Edited by: code acess on Nov 8, 2010 4:06 AM

hi ragavendra,
this is dinesh .i maintained the costing view and planned price. but again i have same error.so please reply me where i missed the data
with regards
dinesh
Edited by: code acess on Nov 9, 2010 4:01 AM

Automatic Creation of Purchase order during Goods Receipt

Hai Guys,
       Can you please tell me is there any ways to get a Automatic PO during Goods Receipt???
    Regards
    Jino.

Config
1.Automatic PO generation must be activated for the movment type in IMG>Inv Mgmt & Phy Inv> GR>Create PO automatically. ( Note that automatic PO is only possible for mvmt 101 & 161)
2. The plant you are working with must be assigned to a standard purchase organisation.
3. A default PO document type must be specified for the GR in IMG> MM>purchasing>specify default vaues for document types.
Master Data
1.In mateial master Auto PO is to be set.
2.in Vendor Master Auto PO generation or agreed with him an indicator is to be set.
3.Info-Record should exist with the combination of material,vendor and the auto PO flagged in info record.

Good receipt for serialized material

Hi
We are using Serial number functionality. When we do good receipt for serialized material, we canu2019t enter more than 6 serial no together. Generally we used to procure 50 -100 materials. We will get serial no to excel sheet by barcode scanner. But when we entered in SAP, system allows only 6 material .
Is there anyway we can copy from excel sheet and paste it in SAP all materials together.
Thanks
Jeny

Hi
Yes there is a way of uploading more than 6 materials at a time in MIGO screen,
You need to first upload or create the serial numbers for the material using an LSMW for IQ01 & here donot give any plant or storage location specific details
At the time of Goods receipt Copy the material serial numbers by clicking on find in MIGO in serial number tab, you need to enter the material & serial numbers copying from the excel sheet & click execute this will list all the serail number , you can select them all & copy into the MIGO screen.
This is how we didi it in our system.
Thanks & Regards
Kishore

HT4571 Cellular data tab is missing on my iPad

The cellular data tab is missing on my iPad. Given advice on other community threads, I just completely restored my iPad. The cellular data tab is still not appearing. What should I do?

To determine your iPad model,
type in your serial number from Settings > General > About
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Prevent quantity updating during Goods Receipt

Hi,
We have a particular requirement for a type of subcontracting process (not the standard SAP subcontracting) as mentioned below.
We create a Purchase Order for a material (without a standard cost) and giving an account assignment category in the PO. The Net price mentioned in the PO is the processing charges for the vendor (service charges). It does not indicate price for the material.
When we receive the finished material from the vendor, we perform a Goods receipt. The stock gets updated and accounting documents are created.
Our requirement is to stop this quantity updating during Goods Receipt. But, at the same time, we would like the accounting documents to be created as we need to pay the vendor.
Is there any way of achieving this?
Pl let me know. Any inputs would be appreciated.

Hi,
Thanks for the response!
I understand that in the standard process, the parent item inforecord takes care of the processing charges. But this is process that has been customized differently as the client has SAP as well as legacy systems talking to each other.
Turning off the qty updating at the material type level will turn it off for all purchase orders created for the material at that particular plant which is something we would like to avoid.
We would basically like to turn it off for particular purchase order type. The reason for turning it off is that after the GR is done, there is a separate process that comes from the legacy system and updates the same quantity of finished product and also posts the consumption of components.
So, our basic requirement is , is it possible to turn off qty updating for the GR of a particular purchase order document type and yet create accounting document. Material is not a valuated material and has a standard cost zero.
Any inputs in this regard will be helpful.
Regards

Document type during Goods Receipt in Intercompany Transfer flow

Hi,
We create a PO, Delivery and GI in company A
We do a Goods Receipt in company B.
Can we customize that FI document type ZZ is used during Goods Receipt in company B?
Document type ZZ may only be used in the Intercompany flow.
Where can I customize this setting?
Thank you in advance,
Best regards,
Eric van Zundert.

Hi,
The following are the standard steps to create an accounting document type and assign it to a transaction.
1) In T-code OBF4, click on "Financial accounting document types" and create a new document type.
2)On the same T-code, Click on "Goods receipt document type" and assign the document type to the transaction.
3)On the same T-code, Click on "Financial accounting No range" and assign the number range for each document type based on company code and fiscal year.
Thanks and Regards,
Maheshwari

Quantity related Scale pricing not considered during Goods receipt

Hello Group,
First thanks for looking into my issue. I tried to follow the solution in SAP Note 401941 on assessing the right unit price as it relates to the quantity received during Goods receipt, but my ABAP developers are very green at this time and they cannot figure out where to place this code fix and how it would work.
Background on issue.
From quantity of 1 to 99, I want the price to be 4.00 each
From quantity of 100 and above, I want the price to be 3.00 each.
When doing goods receipts for quantities that have not reached 100 yet, it is still assessing 3.00 each. I found the OSS note above that is really not helpful and was wondering if anyone else is using scale pricing and how their GRs are calculated for correct unit price.
Thanks all for your assistance.
Samantha

The scale pricing cannot be used to influence price during goods receipt. Goods Receipt will pick up the price from the purchasing document.
Suppose you want to have that the price be determined based on the quantity received over a period of time, you need to use rebate agreement.
The OSS note mentioned in your question says that you can determine the price based on the schedule line quantity during GR (not quantity at the time of GR). It will not solve your requirement.
Lakshman

MIRO(Invoice Verification) posting date is lesser than MIGO(Goods Receipt)

MIRO(Invoice Verification) posting date is lesser than MIGO(Goods Receipt) posting date.
Explanation:
Miro sholud be posted after the GRN has posted. It means that the Posting date of Miro should be greater than or equal to the Posting date of Migo. But I am facing the issue that I can able to post the Miro before the Migo date..
For example: I have posted the Migo(Goods receipt) document with the posting date u2013 10.8.09 and at the same time I can also able to post the Miro(Invoice Verification) posting date as u2013 5.08.09. This is should not be allowed . Kindly give me the solution. Is there any options in SAP standards to restrict this type of Postings(without using user exit).
regards
Varadharaj

Hi
you need to use BADi for this INVOICE_UPDATE
you can give logic as whil;e MIRO system will compare posting date with MIGO doc , then create a Z error msg in se91 nad assign it in that badi
take help of ABAPer, check following link
[LINK |GR date lesser than the PO date, the system should show an error message.;

Serial data tab page missing during Goods Receipt for Mvt type 501

Similar Messages

Maybe you are looking for