Serial Hotsynch w/Vx no longer works
My hotsynching just stopped working. The workstation display shows the hotsynching picture with the left handheld character in full with the right one in fading grey. The computer displays this when the hotsynch button is depressed but the handheld times out with no response. This just started.
When I hotsynch with my laptop, it all works fine. Any thoughts?
Frank Presson
Post relates to: Palm Vx
Hello ronreger, Welcome to the Palm Support Community.
Either another program is using COM1, or you need to change the HotSync Manager to another port and try again.
Any kind of Fax program, or modem program will try to grab and monitor COM1. See if you have one active. I had an option in XP's Media Center that would try and monitor the phone line to make Caller ID announcements when a call came in. This messed up any serial HotSync I tried to perform.
To change the settings in the HotSync Manager, open the program (you'll see it in the lower right tool tray on your PC) by right-clicking on it, then select "Setup". Find the "Local" tab and see if you can select another COM port.
Be sure when you right-click on the HotSync Manager icon that "Local" is selected, and not "Local USB". (Depending on how old the version of Palm Desktop is, you may not even see the option for "Local USB".)
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Similar Messages
-
my photoshop CS 3 no longer works after my free trial ended.The serial number of CS3 wasn't recognised.
Try uninstalling all versions of Photoshop then run the Adobe cleaner to make sure all traces are removed.
Now install cs3 at this point your serial number should work. -
what do you do when acrobat 8 standards serial number no longer works on your computer when downloading?
Your iPad can backup to the computer or it can backup to iCloud. It cannot do both.
http://support.apple.com/kb/ht1766 -
Master Suite 6 - serial no longer working
I had received the Master Suite 6 in December of 2012, and used it flawlessly on my MacBook. I recently upgraded to a MacBook Pro, and transferred the programs I had used (Photoshop, InDesign), but my serial no longer works. I went online, and saw that my adobe account is linked to having the Master Suite 6. Since everything is now in the cloud, has my software which I had received no longer going to work, and I have to now subscribe to use it?Computer Support
do not 'transfer' adobe programs. they should be properly installed using the installation files.
uninstall whatever is currently installed, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then properly install your cs6.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
Since the latest update, most of my third party apps no longer work, none of my photo software, torrent programs, open office, NOTHING!! It is most frustrating - is there a way to 'downgrade' and go back to a previous version of the firmware, or am I just stuck with no apps that work?
They just don't open, and i get an error message like this:
Process:
Google Chrome [27305]
Path:
/Applications/Google Chrome.app/Contents/MacOS/Google Chrome
Identifier:
com.google.Chrome
Version:
27.0.1453.93 (1453.93)
Code Type:
X86 (Native)
Parent Process: launchd [166]
User ID:
501
Date/Time:
2013-05-26 08:08:17.911 +0930
OS Version:
Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report:
28298 sec
Crashes Since Last Report:
13993583
Per-App Crashes Since Last Report: 1
Anonymous UUID:
1681FA19-E0EA-448F-4E99-067A50E38854
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
/usr/lib/libz.1.dylib
Dyld Error Message:
Library not loaded: /usr/lib/libz.1.dylib
Referenced from: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Reason: not a dylib
Binary Images:
0xb000 -
0xbff3 +com.google.Chrome (27.0.1453.93 - 1453.93) <7ABACF68-7D3E-30FA-8B03-9A1C0FFFF4F9> /Applications/Google Chrome.app/Contents/MacOS/Google Chrome
0xf000 - 0x408ffaf +com.google.Chrome.framework (27.0.1453.93 - 1453.93) <C691C1FF-CF8A-3CFA-9F0D-10CDAFA2540F> /Applications/Google Chrome.app/Contents/Versions/27.0.1453.93/Google Chrome Framework.framework/Google Chrome Framework
0x43b8000 - 0x4f74ff7 com.apple.AppKit (6.8 - 1187.37) <6FBB3467-04F9-395F-8EA8-C84347C5BE43> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x5491000 - 0x5491fff com.apple.ApplicationServices (45 - 45) <677C4ACC-9D12-366F-8A87-B898AC806DD9> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x549c000 - 0x54c1ff7 com.apple.CoreVideo (1.8 - 99.4) <A26DE896-32E0-3D5E-BA89-02AD23FA96B3> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x54dc000 - 0x55a5ff3 com.apple.Bluetooth (4.1.3 - 4.1.3f3) <7909C26F-90FB-359F-84DD-51583A2DC3DA> /System/Library/Frameworks/IOBluetooth.framework/Versions/A/IOBluetooth
0x55f8000 - 0x563affb com.apple.RemoteViewServices (2.0 - 80.6) <AE962502-4539-3893-A2EB-9D384652AEAC> /System/Library/PrivateFrameworks/RemoteViewServices.framework/Versions/A/Remot eViewServices
0x5665000 - 0x587cfff com.apple.CoreData (106.1 - 407.7) <17FD06D6-AD7C-345A-8FA4-1F0FBFF4DAE1> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x592a000 - 0x5ae6ffd libicucore.A.dylib (491.11.2) <59A23F06-16AD-35F8-BA58-D17305232402> /usr/lib/libicucore.A.dylib
0x8fe0a000 - 0x8fe3ce57 dyld (210.2.3) <23516BE4-29BE-350C-91C9-F36E7999F0F1> /usr/lib/dyld
0x902fe000 - 0x90362ff3 libstdc++.6.dylib (56) <F8FA490A-8F3C-3645-ABF5-78926CE9C62C> /usr/lib/libstdc++.6.dylib
0x90ce3000 - 0x90e5bff5 com.apple.QuartzCore (1.8 - 304.2) <FB737C74-C460-32A3-9107-D2112BAE6EBC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x9120e000 - 0x9132affb com.apple.desktopservices (1.7.3 - 1.7.3) <7157C51D-C695-3C9E-B532-F551E7E55B56> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x9132b000 - 0x91488ffb com.apple.QTKit (7.7.1 - 2599.24) <39CC892D-2874-33FE-BE30-87FE07D875BD> /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
0x9148c000 - 0x91599057 libobjc.A.dylib (532.2) <FA455371-7395-3D58-A89B-D1520612D1BC> /usr/lib/libobjc.A.dylib
0x91d3a000 - 0x91d7cff7 libcups.2.dylib (327.3) <C7A4A315-FA15-354B-8BC9-BE824C4EFF6D> /usr/lib/libcups.2.dylib
0x91df4000 - 0x920b4ff3 com.apple.security (7.0 - 55179.11) <165A3105-9ADF-329B-93FC-3C8EFAEDDD13> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x9302b000 - 0x93213ffb com.apple.CoreFoundation (6.8 - 744.18) <68AFEE40-0078-347E-9DEE-32CFE0062A10> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x93573000 - 0x93573fff com.apple.Accelerate (1.8 - Accelerate 1.8) <4EC0548E-3A3F-310D-A366-47B51D5B6398> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x93a62000 - 0x93a62ffd com.apple.audio.units.AudioUnit (1.8 - 1.8) <D35BA73D-1E56-3A1D-9F9F-971F3BF8C136> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x93f64000 - 0x93fccff7 com.apple.framework.IOKit (2.0.1 - 755.22.5) <F9A70D23-1108-3616-9DE3-6C5730CA7AB2> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x94474000 - 0x944a3ff7 com.apple.securityinterface (6.0 - 55024.4) <7C5E28DC-F8BE-3238-883F-E1646A2AF895> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x94760000 - 0x947c4fff com.apple.datadetectorscore (4.1 - 269.2) <B4D53047-C613-32F8-9E08-0154EA81B487> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x94884000 - 0x948defff com.apple.ImageCaptureCore (5.0.2 - 5.0.2) <BB0D85EE-A85D-3E7B-B04E-720886553258> /System/Library/Frameworks/ImageCaptureCore.framework/Versions/A/ImageCaptureCo re
0x949b2000 - 0x949f4ff7 libauto.dylib (185.1) <B2B5B639-6778-352A-828D-FD8B64A3E8B3> /usr/lib/libauto.dylib
0x949f9000 - 0x949f9fff com.apple.Cocoa (6.7 - 19) <354094F0-F36B-36F9-BF5F-FD60590FBEB9> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x95365000 - 0x95365fff libSystem.B.dylib (169.3) <81C58EAB-0E76-3EAB-BDFD-C5A6FE95536F> /usr/lib/libSystem.B.dylib
0x95366000 - 0x953b4ff3 com.apple.SystemConfiguration (1.12.2 - 1.12.2) <6E858B9F-337A-314E-88B7-24A274ACE568> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x95490000 - 0x9549efff com.apple.opengl (1.8.7 - 1.8.7) <0631EC1D-833B-39D2-A907-A9F7617E5504> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x9549f000 - 0x95588ff7 libxml2.2.dylib (22.3) <015A4FA6-5BB9-3F95-AFB8-B9281E22685B> /usr/lib/libxml2.2.dylib
0x95868000 - 0x95b86ff3 com.apple.Foundation (6.8 - 945.16) <C4D95341-B4FF-30AC-815A-A23C019C57A3> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x95e49000 - 0x95fa1ffb com.apple.audio.toolbox.AudioToolbox (1.8 - 1.8) <0D36953C-9897-3E9B-8C70-847E90B203A2> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x97b16000 - 0x97b74ff7 com.apple.audio.CoreAudio (4.1.1 - 4.1.1) <953DD669-8C6E-387D-AB3F-D8C8965347DF> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x97bc5000 - 0x97e5ffff com.apple.AddressBook.framework (7.1 - 1169) <AF50144A-A327-3367-81B1-95B3D46E56F0> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x99699000 - 0x99a7cfff com.apple.HIToolbox (2.0 - 626.1) <ECC3F04F-C4B7-35BF-B10E-183B749DAB92> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x99c23000 - 0x99c2cfff com.apple.DiskArbitration (2.5.2 - 2.5.2) <89822A83-B450-3363-8E9C-9B80CB4450B1> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x99c2d000 - 0x99c37fff com.apple.speech.recognition.framework (4.1.5 - 4.1.5) <B855E8B4-2EE3-3BFF-8547-98A0F084F9AF> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x99f02000 - 0x99f1fff7 libresolv.9.dylib (51) <B9742A2A-DF15-3F6E-8FCE-778A58214B3A> /usr/lib/libresolv.9.dylib
0x99f20000 - 0x99f20fff com.apple.Carbon (154 - 155) <604ADD9D-5835-3294-842E-3A4AEBCCB548> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9a08f000 - 0x9a08ffff com.apple.CoreServices (57 - 57) <956C6C6D-A5DD-314F-9C57-4A61D41F30CE> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 4 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: My Passport 071A, 0x1058 (Western Digital Technologies, Inc.), 0x071a, 0xfa130000 / 6
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3 -
[SOLVED] USB 3G no longer works after upgrade to GNOME 3.8
I did the 'big' update today, including upgrading to GNOME 3.8. Unfortunately, NetworkManager no longer picks up my 3G USB modem (which used to work fine before the update). Any pointers as to how I could debug this would be greatly appreciated.
wvdial has never really worked for me, but gnome networkmanager used to pick up my device and the connection, and now simply acts as if it's no longer present. Attempting to follow the instructions on the wiki to re-setup my USB stick (the instructions I followed in the first place) no longer works. Did today's update cause the same problem for anybody else?
**Update: After updating today to modemmanager 0.7.990-4 and running
sudo systemctl enable ModemManager
sudo systemctl start ModemManager
I have full connectivity again with the built-in DW5550 mobile broadband card in my Dell Precision M6600 (including showing signal strength in the GNOME 3.8 top bar, etc). Thanks all for the help, and (most importantly) to whoever fixed up modemmanager!
Last edited by dawid.loubser (2013-04-26 16:57:42)wvdial might also be a workaround, if one does not like to downgrade. In my case, I had to unset my PIN on the SIM card first. One can do that using a mobile phone, for example.
Then
# pacman -S wvdial
in /etc/wvdial.conf, I put
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Stupid Mode = 1
Dial Attempts = 3
Init1 = ATZ
[Dialer huawei]
Modem = /dev/serial/by-id/usb-ZTE_Incorporated_1_1_Surf-stick_MF19001MOD010000-if02-port0
Baud = 115200
[Dialer voda]
Init3 = AT+CGDCONT=1,"IP","web.vodafone.de"
[Dialer dial]
Phone=*99**1#
Username = umts
Password = umts
You can find out your modem name by looking it up with
ls /dev/serial/by-id/
In my case there were names containing the strings if00, if01 and if02, and if02 turned out to be the correct one. This depends on hardware.
Also, in the "Init 3" line, you may have to replace "web.vodafone.de" according to your provider. The section "dial" seems to be quite universal from what I read on the web, so you may not have to change that.
then
# wvdial huawei voda dial
and hope for the best.
Disclaimer: I do not have a comprehensive understanding of what I did here, but it worked in my case and it might work for you, too.
I noticed that the Defaults section makes a difference, because the one I just edited in above avoids some delay in dialing.
Last edited by tobi-fankhaenel (2013-04-23 08:23:00) -
[SOLVED] Openbox autostart no longer working since upgrade
After the upgrade on May 14 2013 my autostart file no longer works. I tried renaming my autostart.sh to just autostart no luck. There is nothing wrong with the autostart file as I can run it manually and it will load all my apps. Also, if I cd to /usr/lib/openbox/ and run openbox-autostart directly it works. Here are the updated packages:
[2013-05-14 21:34] [PACMAN] upgraded ethtool (1:3.8-1 -> 1:3.9-1)
[2013-05-14 21:34] [PACMAN] upgraded firefox (20.0.1-5 -> 21.0-1)
[2013-05-14 21:34] [PACMAN] upgraded gsettings-desktop-schemas (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded glib-networking (2.36.1-1 -> 2.36.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.0.1-2 -> 3.8.2.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnupg (2.0.19-7 -> 2.0.20-1)
[2013-05-14 21:34] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
[2013-05-14 21:34] [PACMAN] upgraded gvfs (1.16.1-2 -> 1.16.2-1)
[2013-05-14 21:34] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
[2013-05-14 21:34] [PACMAN] upgraded mplayer (35920-2 -> 35920-3)
[2013-05-14 21:34] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
[2013-05-14 21:34] [PACMAN] upgraded pango (1.34.0-1 -> 1.34.1-1)
[2013-05-14 21:34] [PACMAN] upgraded pdnsd (1.2.9.a-1 -> 1.2.9.a-2)
[2013-05-14 21:34] [PACMAN] upgraded python2-distribute (0.6.38-1 -> 0.6.39-1)
[2013-05-14 21:34] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
[2013-05-14 21:34] [PACMAN] upgraded sudo (1.8.6.p8-1 -> 1.8.6.p8-2)
[2013-05-14 21:34] [PACMAN] upgraded thunderbird (17.0.5-2 -> 17.0.6-1)
[2013-05-14 21:34] [PACMAN] upgraded virtualbox (4.2.12-2 -> 4.2.12-3)
[2013-05-14 21:34] [PACMAN] upgraded vte-common (0.34.4-1 -> 0.34.5-1)
[2013-05-14 21:35] [PACMAN] upgraded python3-threaded_servers (2013.5.12.3-1 -> 2013.5.14.1-1)
Not sure what's going on or what could have caused it. My .xinitrc looks like this:
#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
export BROWSER="chromium"
# Start GNOME Keyring
eval $(/usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh)
# You probably need to do this too:
export SSH_AUTH_SOCK
export GPG_AGENT_INFO
export GNOME_KEYRING_CONTROL
export GNOME_KEYRING_PID
exec openbox-session
My .zprofile
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && startx &> ~/.xlog
My systemd startup service:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Getty on %I
Documentation=man:agetty(8) man:systemd-getty-generator(8)
Documentation=http://0pointer.de/blog/projects/serial-console.html
After=systemd-user-sessions.service plymouth-quit-wait.service
After=rc-local.service
# If additional gettys are spawned during boot then we should make
# sure that this is synchronized before getty.target, even though
# getty.target didn't actually pull it in.
Before=getty.target
IgnoreOnIsolate=yes
# On systems without virtual consoles, don't start any getty. (Note
# that serial gettys are covered by [email protected], not this
# unit
ConditionPathExists=/dev/tty0
[Service]
# the VT is cleared by TTYVTDisallocate
ExecStart=-/sbin/agetty -a dodo3773 %I 38400
Type=simple
#Restart=always
#RestartSec=0
UtmpIdentifier=%I
TTYPath=/dev/%I
TTYReset=no
TTYVHangup=no
TTYVTDisallocate=no
KillMode=process
IgnoreSIGPIPE=no
# Unset locale for the console getty since the console has problems
# displaying some internationalized messages.
Environment=LANG= LANGUAGE= LC_CTYPE= LC_NUMERIC= LC_TIME= LC_COLLATE= LC_MONETARY= LC_MESSAGES= LC_PAPER= LC_NAME= LC_ADDRESS= LC_TELEPHONE= LC_MEASUREMENT= LC_IDENTIFICATION=
# Some login implementations ignore SIGTERM, so we send SIGHUP
# instead, to ensure that login terminates cleanly.
KillSignal=SIGHUP
[Install]
WantedBy=getty.target
Edit: I tried switching to bash in a tty and then just startx but that doesn't help either.
Edit2: To be clear openbox does load a desktop. The autostart scripts at ~/.config/openbox/ just don't run. Thanks.
Edit3: I decided to run the command issued in openbox-session and added --debug to it. Here is the output of "xinit /usr/bin/openbox --debug --startup "/usr/lib/openbox/openbox-autostart OPENBOX" "$@" -- :1 -nolisten tcp" :
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux dodo713 3.9.2-2-ck #1 SMP PREEMPT Sun May 12 18:19:49 EDT 2013 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=06874255-7a5d-4968-8f09-1e53cb761f44 ro quiet init=/usr/lib/systemd/systemd
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Fri May 17 08:14:11 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
setversion 1.4 failed
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
setversion 1.4 failed
Openbox-Debug: --startup /usr/lib/openbox/openbox-autostart OPENBOX
Openbox-Debug: Moving to desktop 1
Openbox-Debug: not managing override redirect window 0x4000bb
which: no hsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no esetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no xsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
kupfer: Reading from stdin
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Openbox-Debug: Caught signal 22. Ignoring.
Openbox-Debug: UPDATE DESKTOP NAMES
Openbox-Debug: Keyboard map changed. Reloading keyboard bindings.
Edit4: Removed everything from /etc/xdg/autostart and ~/.config/autostart/ directories. That didn't work.
Edit5: Tried installing xorg-xsetroot to let openbox set the color of the wallpaper. That didn't work.
Edit6: Checked the output of "loginctl show-session $XDG_SESSION_ID" to make sure that wasn't the issue. Looks okay to me:
Id=1
Timestamp=Fri 2013-05-17 10:25:53 PDT
TimestampMonotonic=13650783
DefaultControlGroup=systemd:/user/1000.user/1.session
VTNr=1
TTY=tty1
Remote=no
Service=login
Leader=405
Audit=1
Type=tty
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=1368811547544203
IdleSinceHintMonotonic=7545641
Name=dodo3773
Edit7: Tried installing xorg-xrdb thinking maybe that would help and did todays updates. No luck yet.
Edit8: Kupfer still loads even though nothing else does. So I uninstalled kupfer. Same thing though. No autostart.
Edit9: Tried booting into repo kernel instead of ck kernel. Didn't work.
Last edited by dodo3773 (2013-05-19 06:34:44)WonderWoofy wrote:Interestingly, of all those things you included in your post, you forgot to include the autostart script itself. What does that look like?
Well, since it worked fine even when called indirectly through openbox-autostart and since it's worked fine for months I figured it was fine. I am happy to post it though. Here you go:
feh --bg-scale /home/dodo3773/Pictures/blacksolid.png &
xfce4-panel &
numlockx &
keepassx -lock &
kupfer --no-splash &
~/Documents/Scripts/startupopen.sh &
sleep 30 && sudo /usr/bin/ntpd -qg &
sudo /usr/sbin/ethtool -K eth0 rx off &
~/Documents/Scripts/conky.sh &
sudo /home/dodo3773/Documents/Scripts/temp_throttlenew > /dev/null 2>&1 &
Here are the external scripts that are called (startupopen.sh and temp_throttlenew):
startupopen.sh
#! /bin/bash
sleep 13
chromium &
thunderbird &
sleep 20
devilspie -a &
sleep 7
pkill devilspie &
exit
temp_throttlenew
#!/bin/bash
# temp_throttle.sh max_temp
# USE CELSIUS TEMPERATURES.
if [[ $EUID -ne 0 ]]; then
echo "This script must be run as root" 1>&2
exit 1
fi
#if [ $# -ne 1 ]; then
# If temperature wasn't given, then print a message and exit.
# echo "Please supply a maximum desired temperature in Celsius." 1>&2
# echo "For example: ${0} 60" 1>&2
# exit 2
#else
#Set the first argument as the maximum desired temperature.
MAX_TEMP=85
#fi
# The frequency will increase when low temperature is reached.
let LOW_TEMP=$MAX_TEMP-5
CORES=$(nproc) # Get number of CPU cores.
echo -e "Number of CPU cores detected: $CORES\n"
# Temperatures internally are calculated to the thousandth.
MAX_TEMP=${MAX_TEMP}000
LOW_TEMP=${LOW_TEMP}000
# FREQ_LIST is a list (array) of all available cpu frequencies the system allows.
declare -a FREQ_LIST=($(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies))
# CURRENT_FREQ relates to the FREQ_LIST by keeping record of the currently set frequency.
let CURRENT_FREQ=1
function set_freq {
echo ${FREQ_LIST[$1]}
cpupower frequency-set -g "ondemand" -d "800MHz" -u ${FREQ_LIST[$1]}
function throttle {
if [ $CURRENT_FREQ -ne $((${#FREQ_LIST[@]}-1)) ]; then
let CURRENT_FREQ+=1
echo -n "throttle "
set_freq $CURRENT_FREQ
fi
function unthrottle {
if [ $CURRENT_FREQ -ne 0 ]; then
let CURRENT_FREQ-=1
echo -n "unthrottle "
set_freq $CURRENT_FREQ
fi
function get_temp {
# Get the system temperature.
# If one of these doesn't work, the try uncommenting another.
TEMP=$(cat /sys/class/thermal/thermal_zone0/temp)
#TEMP=$(cat /sys/class/hwmon/hwmon0/temp1_input)
#TEMP=$(cat /sys/class/hwmon/hwmon1/device/temp1_input)
while true; do
get_temp
if [ $TEMP -gt $MAX_TEMP ]; then # Throttle if too hot.
throttle
elif [ $TEMP -le $LOW_TEMP ]; then # Unthrottle if cool.
unthrottle
fi
sleep 3
done
Stuff that needs sudo is in my sudoers as "username hostname NOPASSWD: item1,item2,etc,etc". Nothing too exciting. Seems like if there was suddenly something wrong with my autostart file at least some of the stuff would run either way though cause of "&". Pretty puzzling this issue is. -
My iPhone 4s is no longer working.
My iPhone 4s is no longer working. It kept turning off and on on it's own and i tried to restore it. I pressed the lock and home button. I connected it to itunes as it says. Once in itunes it says the iPhone is on recovery mode and then when it is suppose to restore it says :Verifling with apple and connecting to iphone. Then another screen pops but that an unknown error has happened and doesn't recovery it. What can I do?
It has no serial number or nothing.
-
URLConnection.setRequestProperty no longer works in 1.6.0_22?
Anyone else having a problem? A program on one of our user's machines suddenly no longer works, and it looks like it's because their JRE has updated itself.
The program makes a request to a server using a digitally signed, serialized object thusly:
SignedObject so = new SignedObject(request, codeKey, signer);
HttpURLConnection con = (HttpURLConnection)url.openConnection();
con.setRequestProperty("Content-Transfer-Encoding", "gzip");
con.setRequestMethod("POST");
con.setDoInput(true);
con.setDoOutput(true);
ObjectOutputStream out = new ObjectOutputStream(new GZIPOutputStream(con.getOutputStream()));
out.writeObject(so);
out.close();This interaction has been untouched for some years now. The Servlet handling the request does:
InputStream is = request.getInputStream();
String coding = request.getHeader("Content-Transfer-Encoding");
if (coding != null && coding.trim().equalsIgnoreCase("gzip")) {
is = new GZIPInputStream(is);
log.debug("Request will be de-zipped");
ObjectInputStream ois = new ObjectInputStream(is);
Object o = ois.readObject();
ois.close();Suddenly the user was getting error 400 (invalid request) The server was throwing java.io.StreamCorruptedException: invalid stream header: 1F8B0800
After a lot of head scratching I noticed he was using rev 22, so I installed it on my own machine and I get the error too. It appears that the Content-Transfer-Encoding header is simply not happening any more. The coding variable in the server is now null. Debugging the sending code calling setRequestProperty no longer adds an entry to the requests field of HttpURLConnection. 1F8B0800 is the "magic number" of a gzip file.
What's going on? This is the second release in a row that's broken existing code (the first by adding a restriction to LDAP search field names).
Later:
I've constructed an SSCE and submitted a bug report on this one. We'll see if anything happens. I'm concerned that pre-release regression testing isn't what it was under Sun.
Edited by: malcolmmc on 29-Oct-2010 20:02No, Since I didn't particularly intend to install the upgrade myself, but I have now and nothing seems relevant.
This is a moderately significant piece of functionality, and they have no business changing it in a minor bug fix release.
By the way, when constructing my example I first accidentally put in the header key without the hyphens and that did get through.
1/11:
My [bug report|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6996110] has now been entered:
The work around suggested is to add -Dsun.net.http.allowRestrictedHeaders=true which implies that this was a deliberate change. Google turns up no results for this flag suggesting this is the first public documentation of it.
So this is, indeed, a deliberate change which is not backward compatible, not highlighted in the release notes and made on a minor revision.
Edited by: malcolmmc on 01-Nov-2010 09:12 -
I have design premium cs3 on my old laptop which no longer works and want to put it on my desktop pc
I have design premium cs3 on my old laptop which no longer works and want to put it on my desktop pc how can I do this without buying it again i have it on my previous products page with the serial key
If you have the disks, use them to reinstall. Otherwise, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html -
ISight on Bootcamp Windows 7 no longer working
After upgrading to Lion OS X, my iSight no longer works on Bootcamp Windows 7. It formerly worked under Snow Leopard's Bootcamp Win 7.
i would believe it might be the limiting of the number of programs during startup.
do a msconfig and configure it to startup only windows item only. See if this makes any diference
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
'screen' no longer works in Yosemite - Resource Busy
For many years I have used USB serial devices to connect to external machines, using commands like
$ screen /dev/tty.usbserial-FTFZXCV 115200
Since the upgrade to Yosemite, this no longer works. The screen commands give an error
'screen cannot open /dev/tty.usbserial-FTFZXCV for R/W - Resource Busy'
There was a similar question from April but that talked about using lost to identify an orphan session.
$ lsof | grep usbserial # no output
$ pgrep screen # no output.
The permission seems sensible:
$ ls -l /dev/tty.*
crw-rw-rw- 1 root wheel 18, 8 21 Nov 19:42 /dev/tty.Bluetooth-Incoming-Port
crw-rw-rw- 1 root wheel 18, 6 21 Nov 19:42 /dev/tty.Bluetooth-Modem
crw-rw-rw- 1 root wheel 18, 0 21 Nov 19:42 /dev/tty.usbserial-FTZXCVFrom Sony:
In regard to your inquiry, compatible drivers for MAC OS Yosemite will be released by the end of this year.
If needed, please contact me at the phone number below.
Regards,
SONY -
9802 with 9870 (serial comms) in Hybrid mode not working
Hello,
I am developing a project with several IO modules in FPGA and a 9870 RS232 module in Scan Engine so that I can use the VISA vis instead of custom FPGA code. This was all working well on a 9025 controller in a 9114 chassis.
We just changed over to a 9082 controller and this is no longer working. On a bare bones test project, If I set the chassis to Scan Engine, the serial ports are found with the VISA Find Resources vi and open with no error. When I switch to FPGA, the ports are not found and an open returns an error -1073807343 - VISA: (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.
I have followed the instructions in
http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690
and have been successfully working in this environment for several months with the old hardware.
Specifically, the 9870 is under the chassis and the IO modules are under the FPGA, a stub FPGA has been compiled and downloaded, the chassis is deployed after changing, I believe all required software has been downloaded, etc, etc.
Has anyone ever tried this scenario?
Thanks,
PJ
Attachments:
Blank_9802.zip 46 KBwonder wrote:be sure that the modules are loaded. lsmod | grep vbox.
for bridged you have to load vboxnetflt
Thanks a bunch...
sudo modprobe vboxnetflt
did it. -
License is no longer working Error - 150:30 - CS4
I have seen this question here but have not seen a solution. I recently (grudgingly) upgraded to Lion 10.7
Now all my CS4 applications won't opne and give me this error that the license is no longer working! I have gone through all the fixes that Adobe recommends and nothing works. The only thing I have not done is uninstall everything and reinstall - I am really afraid to do that.
Has anyone found a solution to this? I am really upset and depend on Dreamweaver and Photoshop for my work!Hey Marty,
had the same problem here with PSE 8 after system recovery from time machine backup. I also updated to Lion couple of month ago. I also tried all of the listed solutions on the adobe support pages but none of them worked. The folder FLEXNet_Publisher in the systems hard drives folder Preferences, which it says to be deleted does not exist and was only found in the application support folder. I also tried all of the other solutions listed on this page: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html and had more or less the same problems, it did not work.
I found the following solution myself by doing this:
go to the folder [hard drive]/Library/Application Support/FlexNet Publisher and make a copy of this folder
then go to the folder [hard drive]/Library/Preferences and paste this copied folder there.
Then try again to start your application and now it should show you the licenceregistry window. Type in your serial number and confirm. Then the application starts and runs properly. So it was on my system. -
I have a kosher version of Photoshop CS I have been using for the past few years. However, all of a sudden, the program no longer works. I had a message suggesting I uninstalled/reinstalled the software, which I tried, but upon reinstallation it said my Serial Number is invalid!!
Unfortunately, there are no options to speak with anyone from Adobe, nor is there a contact email for this type of situation.
I'm not a paid Adobe "member" but I assumed that upon spending a large amount of money on the product, I would receive some sort of assistance as and when needed, if only an email address to send a query to.
Unfortunately, Adobe seem to wash their hands of any customers that don't sign up to be a member. Poor show.I assumed that upon spending a large amount of money on the product, I would receive some sort of assistance
Would you expect the makers of a power drill or a washing machine to assist you with problems with those machines more than 10 years after you bought them?
Have you even done a Forum search?
Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://forums.adobe.com/docs/DOC-2325
Anyway, the issue might be connected to this
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
in which case you would, as far as I know, be entitled to install Photoshop CS2.
Maybe you are looking for
-
What 3G users need to know before upgrading to OS 4.0, possible fixes
Hey Everyone, I purchased my iPhone 3G back on February 1st, so I am only about 5 months into my first/new contract with At&T. That being said, I wished I had sprung for the extra $100 on the 3Gs due to the following complications you should all be a
-
Palm z22 won't sync with Windows 7
I have a palm Z22 which I only use for geocaching. Has been working fine with Windows XP. Just got a new computer running Windows 7. Installed from the disc (few years old)..wouldn't sync or recognize the PDA. Downloaded Palm Desktop 6.2 which was s
-
The mail icon on the dock shows that I have unread messages, but when I click on it, my mail won't open. All I get is the mail toolbar. I have to restart my computer in order to get into my mail window to view and send messages. This happened about a
-
I have a feeling I already know the answer to this, but is there a way to remove the ToC in the Aggregator?
-
Hi All, I would like to know some general things about SAP Knowledge Warehouse Like. 1. Installation? a.Where can I get the installation DVD from? b.Is it a part of SAP NW04 installation kit? c.Does SAP KW require a separate Licence apart from NW04?