Serial No updating

Hi
Whenever I want to update the serial numbers, Lot Nos of a particular Item Iam selecting Global Update in Inventory Inventory Transactions SerialNos
But there, whole qty is updating but I want to update like this...
If Item total qty is 100, for 15 items in one Lot, 35 in another and remaining are in another lot...
Is there any solution to do this scenario?
Thanks & Regards
Chakrapani Bandaru

If you just want to update part of the data, Global Update will not be an option. Global means ALL inventory. There is no restricted global.
Thanks,
Gordon

Similar Messages

Serialized v3 update and setuptables

i have 2 questions regarding LO extraction
<b>Question 1.</b>
while going thru the Lo cockpit step by step
i found there is a certain point where we select serialized v3 update for an initilize delta load. As per my knowledge, i read that serialised v3 is not used any more and is replaced by direct,queued and unserialized v3 update prcocess. if i am wrong where can we find the option to select serialized v3 update in LO cokcpit.
<b>Question 2</b>
when i tried to delete the setup table , the message shown Setup table deleted but i can see data for the same module in RSA3 after the process...hows is it possible.
i appreciate if anyone can reply me and points will be assigned for suitable answers..
thanks and regards
Abhilash Muraleedharan

Abhilash,
Follow the following steps
Q1. In transaction LBWG there is an option to change the V3 delta to "Direct Delta". This should solve the problem. Make sure that the Queue is empty or else you willl not be able to change
Q2. Make sure that you are selecting the right application hen you delete the data. Follow the follwing steps for filling the setup tables and seeing data in RSA3
Run T-code MCNB for 2LIS_03_BX setup
Run SETUP for 2LIS_03_BF AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
Thanks.

DRAWBACKS OF DIRECT DELTA, SERIALIZED V3 UPDATE...........

HI,
anybody explain me in details draw backs of Direct Delta, Sereilized v3 update ,Unsereialzed v3 update and Queued Delta in lo-cockpit.
Regards.
ASIM.

Unserialized V3 update:
With this update mode, the extraction data of the application being viewed is written
to the update tables with an V3 update module and is kept there until the data is read
with an update collection run and processed. The data in the update collection run,
however, is read from the update table without considering sequence and is transferred
to the delta queue.The method Unserialized V3 Update does not ensure serialization of the document
data. Update to the DataStore objects is not recommended if serialization is desired
(for example, for reporting purposes)
Direct delta:
With this update mode, the extraction data is transferred directly to the delta queue
with every document posting. The sequence of the transfer thus agrees with the
chronological order of data creation.Benefits and properties of Direct Delta:
By writing to the delta queue within the V1 posting process, serialization by
document is ensured with the enqueue concept of applications.
For customers with fewer documents, the process is recommended if a
downtime is possible in the initialization process during restructuring and delta
initialization requests.
V1 is more burdened by this process than with V3 or Queued Delta. For
customers with the amount of documents mentioned above, this is not really
a factor.
Extraction is independent of V2 updating.
Additional monitoring of update data or extraction queue is not required.
Queued delta:
With this update mode, instead of being collected in the update data, the extraction
data from the affected application is collected in an extraction queue and can be
transferred to the delta queue, in a similar manner to the V3 update, with an update
collection run. Depending on the application, up to 10,000 delta extractions of
documents can be aggregated to an LUW in the delta queue per DataSource.
Benefits and properties of Queued Delta:
By writing to the extraction queue in the V1 update process, serialization by
document is ensured with the enqueue concept for applications.
Due to the collection of data in the extraction queue that is regularly processed
(SAP recommends hourly), the process is especially recommended for customers
with a high amount of documents.
The collection run uses the same reports as previously (RMBWV311,...).
In the initialization process, the collection of new document data during the delta
initialization request can reduce the downtime on the restructuring run (filling
the setup tables).
V1 is much more difficult than the use of V3.
In contrast to the V3 collection run, a definitive end of the collection run is
within reach and a subsequent process can be scheduled. After the collection
run for an application has finished, an event (&MCEX_11,...) is triggered
automatically, that can be used at the start of a subsequent job.
Extraction is independent of V2 updating.
(V3)serialized delta ;
With this update mode, the extraction data of the application being viewed is written
to the update tables with an V3 update module and is kept there until the data is read
with an update collection run and processed. The data in the update collection run,
however, is read from the update table with keeping original sequence and is transferred
to the delta queue.
Error:
1) The serialized V3 update can only guarantee the correct sequence of extraction data in a document if the document has not been changed twice in one second.
2) Furthermore, the serialized V3 update can only ensure that the extraction data of a document is in the correct sequence if the times have been synchronized exactly on all system instances, since the time of the update record (which is determined using the locale time of the application server) is used in sorting the update data.
3) Furthermore, the serialized V3 update can only ensure that the extraction data of a document is in the correct sequence if the times have been synchronized exactly on all system instances, since the time of the update record (which is determined using the locale time of the application server) is used in sorting the update data.
4) In addition, the serialized V3 update can only ensure that the extraction data of a document is in the correct sequence if an error did not occur beforehand in the U2 update, since the V3 update only processes update data, for which the U2 update is successfully processed
Hope this helps.
Regards,
Viren

Direct Delta, queued , Non-serialized V3 Update

could someone out here help me in understanding the Direct Delta, queued , Non-serialized V3 Update...
i mean a detailed level explanation.... or just in case u have any document then kindly pass it on.... to [email protected]

Hi,
Update Methods,
a.1: (Serialized) V3 Update
b. Direct Delta
c. Queued Delta
d. Un-serialized V3 Update
Direct Delta: With this update mode, the extraction data is transferred with each document posting directly into the BW delta queue. In doing so, each document posting with delta extraction is posted for exactly one LUW in the respective BW delta queues.
Queued Delta: With this update mode, the extraction data is collected for the affected application instead of being collected in an extraction queue, and can be transferred as usual with the V3 update by means of an updating collective run into the BW delta queue. In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each DataSource into the BW delta queue, depending on the application.
Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
(serialized) V3
Transaction data is collected in the R/3 update tables
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Issues:
Even though it says serialized , Correct sequence of extraction data cannot be guaranteed
V2 Update errors can lead to V3 updates never to be processed
direct delta
Each document posting is directly transferred into the BW delta queue
Each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Less monitoring overhead of update data or extraction queue
Cons:
Not suitable for environments with high number of document changes
Setup and delta initialization have to be executed successfully before document postings are resumed
V1 is more heavily burdened
queued delta
Extraction data is collected for the affected application in an extraction queue
Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Suitable for environments with high number of document changes
Writing to extraction queue is within V1-update: this ensures correct serialization
Downtime is reduced to running the setup
Cons:
V1 is more heavily burdened compared to V3
Administrative overhead of extraction queue
Un-serialized V3
Extraction data for written as before into the update tables with a V3 update module
V3 collective run transfers the data to BW Delta queue
In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3.This BW Delta queue is read when a delta load is executed.
Issues:
Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
V2 update has to be successful
Hope this helps
regards
CSM Reddy

Serialized V3 update

Hi Experts,
Can someone please explain to me the functions of serialized V3 update, and when can we use it?
Thank you in advance

Hi..
V3 Update Modes in LO Cockpit
Transaction data is collected in the R/3 update table
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
Records in transaction tables and in update tables
A periodically scheduled job transfers these postings into the BW delta queue
This BW Delta queue is read when a delta load is executed.
the above is summary ... further
search for this
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Message was edited by:
shiv

SHPCON serial number updates item on delivery but not item in HU

I am using SHPCON to update the item on delivery with serial numbers. After that I use SHPCON to pack that same item in a handling unit. From the pack screen I should be able to select the item and hit the serial number button and see the serial number. Instead it says there is no serial number on the item. I populated E1EDL11 under E1EDL24 to get the serial number on the item. I also tried during packing populating E1EDL46 under the HU item E1EDL44 but that doesn't work either.
Anybody run into this issue?

Hi,
If your Sloc is HU managed then need to maintain serial numbers in HU only.
i think you are doing packing at shipment level, HU should packed and serial numbers assigned then finally assigned to shipment document.
Rgds,
Kris.

X240 serial number update. Please help!!

New Lenovo X240 has extra digits on machine type and serial number.
I normally update serial number using a original method that boots into a utility, serialize new System Board starting:
1S(machine type)(serialnumber) (total 16digits) and system should be successfully setup
New product has extra digits so I could not update new serial number for the unit.
I'm seeking help from expert here in this forum. Please help !!
Thanks
Big

sameeroquai wrote:
What happened to my serial number? Should I be notifying apple?
It's nothing to worry about. If the logic board is replaced, there will no longer be a serial number visible to the OS. Just continue to give the one that's on the bottom of the iMac's foot, or on the box it came in.
The logic boards they use for repairs are refurbished and they just remove the serial number from them before they send them out to the people doing the actual repair. And the people doing the repair don't have the equipment required to add back the serial number.
charlie

Serial number updation in Assets after GR & MIRO for PO

Hi Experts,
I need a help on the following
We are buying for example 10 Laptops. we have created the Laptop as Asset , Created the Laptop as Material master and Maintained the serial number profile in Material master.
We created a PO with account assignment as "Asset" and included the Asset in PO, did the Goods Receipt with reference to this Asset account assigned PO, then at GR system asks for the Serial number and entered the Serial number and saved.
Did the MIRO for this PO and asset values are posted.
But after GR/MIRO System has updated only the quantity and Values not this Serial number.
I need to check how the system will update the Serial number in Assets, because there is a field in Asset display AS03 --serial no.
but here there is no update of the serial number.
Is there is any config settings is there for this. Please share your information on this.
Thanks in advance.
rgds
Swamy

Hi Gurus,
Any updation or some reply on this thread.
Please share your thoughts .
rgds
Swamy

RG23C-Part -I Serial Number Updation-Issue

Hi CIN Gurus,
        I am facing a problem in excise sap 4.7 version, wherein if I do the capital goods receipt via MIGO and also capturing excise invoice or creating only part-I entry along with it , the system is giving me 2 serial numbers with receipt and issue indicator for the MIGO Material document number in Table J_1IPART1.
       My client is not agreeing with the concept of two serial numbers for the same transaction and also in the PART-I register system is giving the serial number with receipt indicator. The client is reluctant to accept because there will be a gap in the excise serial number Part-I which is not acceptabe for excise authorities.
        Is there any remedy for making it to 1 serial number.
Thanks in advance and points will be suitably rewarded.
Regards
Gopal

Hi Gurus,
Any updation or some reply on this thread.
Please share your thoughts .
rgds
Swamy

Aperture askes for Serial after update (3.2)

Hi Guys, I just updated my Aperture to 3.2 and now every time I open it, it askes for a Serial number. Here's the problem:
I don't have one! Because I bought the App in the App Store, and normally there you don't get a Serial! Can anyone help me??

Hi
Maybe this could help you: https://discussions.apple.com/message/16350457#16350457
Regards, Michael

IWork '08 serial number update help?

Can anyone please tell me if there is a straight forward way to update the iwork '08 serial number from a single user license to a family pack license? There does not seem to be a supported way to enter the new number, even after a re-install. Any feedback would be greatly appreciated!

It seems that re-installing the package leaves the existing preferences files.
Run this short simple script to remove them.
--\[SCRIPT]
set p2pl to path to preferences from local domain as text
set p2pu to path to preferences from user domain as text
tell application "Finder"
delete file (p2pl & "com.apple.iWork08.Installer.plist")
delete file (p2pl & "com.apple.iWork08.plist")
delete file (p2pu & "com.apple.iWork.Keynote.plist")
delete file (p2pu & "com.apple.iWork.Numbers.plist")
delete file (p2pu & "com.apple.iWork.Pages.plist")
end tell
--[/SCRIPT]
Yvan KOENIG (from FRANCE mardi 30 décembre 2008 20:42:39)

Serial number update on Lenovo X 3650 M5

Hello, please how can i update serial number on lenovo system X 3650 M5 server. please send me link if any bootable utility.

You can download the IBM ASU (up to version 9.63) from here:
https://www-947.ibm.com/support/entry/myportal/docdisplay?lndocid=tool-asu
If you are looking for ASU for new Lenovo Products, please refer to the following link:
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=LNVO-ASU
To change the serial number information, use the following syntax:
ASU set SYSTEM_PROD_DATA.SysInfoSerialNum SN_info
where SN_info is the serial number of the system.
For example:
ASU set SYSTEM_PROD_DATA.SysInfoSerialNum 1234567

ThinkPad Edge E320 UUID & Serial Number update using WinFlash

Hi All,
I lost my UUID & Serial number during the UEFI update, I saw a way to update them in ThinkCentre M series but I could not apply it on my Edge E320, is there a semilar way to do the same using WinFlash on E320?
Thanks in advanc

After todays restart original baterry capacity is restored back to 62+Wh, But current capacity is still 54Wh, higher than after last battery reset. I am upgrading to higher version of Power Manager.

My new macpro (lion) won't accept my logic serial after update to 9.1.5?

..to 9.1.5... or said better, after asking and accepting my serial, it asks me for an "original serial" that doesn't seem to be the one i paid for..
PLEASE HELP ME !!!

i used an internet paid service to unlock it !
i tried to contact the carrier services and they asked for to contract and the sim card number and some other stuff that i don't have
and when i contacted the online unlocking service he answer : that he done his job and this backed him up
IMEI : *****
Serial Number: ******
Initial Activation Policy ID: 227
MEID: Activation Policy
Description: France SFR.
IMEI: ******
Applied Activation Policy ID: 227
Part Description: IPHONE 4 BLACK 32GB-ENF
Applied Activation Policy Description: France SFR.
Product Version: 7.1.2 Next
Tether Policy ID: 227
Last Restore Date: Next Tether Activation Policy Description: France SFR.
Bluetooth MAC Address:
First Unbrick Date: 03/11/10
MAC Address: 18******CC
ICCID: *******
Last Unbrick Date: 02/09/14
Unbricked: true
Unlocked: true

Serial Number update in sales order creation

Hi All,
i am replicating sales from from CRM to ECC. here i am getting serial number in vbap table z filed. but i need to pass this filed in line iten Extras-- Techinal Objects-- please tell me in which user exit i need to write a logic
thanks
ram

Hi
In this include :- MV45AFZZ, there is form routine :FORM userexit_move_field_to_vbap. check this routine this will be helpful to you.

Serial No updating

Similar Messages

Maybe you are looking for