Serial nos not to appear only for STO delivery

Hi All,
We have set up serialziation for Finished products. We have set up the serial no. profile so that serial no. entry is mandatory during delivery (only).
Now the client doesnt want the serial nos. to appear for deliveries created for stock transfer process. 
How can this be done?
Can we set up some contol the the delivery type level?

Hi,
There is no such direct solution for control serial number assignment on basis of delivery,but I think still we can fulfill this requirement.
In OIS2
For serialization procedure maintain serial usage none or optional,so it will not be mandatory/required
Then now incompleteness procedure is based on delivery document type and delivery document item
So through this you can make it mandatory for required delivery delivery type/item and exclude it from STO
Kapil

Similar Messages

  • Error message appears only for a short time

    An error message appears only for a very very short time so i can't read it. Sometimes the message appers directly after log in, and sometimes after using the mac for a longer time. So What should i do?

    Thank you for the fast reply.
    This is the log of the last start. The message appeared directly after login.
    06.03.12 21:37:47,000 bootlog: BOOT_TIME 1331066267 0
    06.03.12 21:38:00,000 kernel: PMAP: PCID enabled
    06.03.12 21:38:00,000 kernel: Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
    06.03.12 21:38:00,000 kernel: vm_page_bootstrap: 2003650 free pages and 77118 wired pages
    06.03.12 21:38:00,000 kernel: kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
    06.03.12 21:38:00,000 kernel: zone leak detection enabled
    06.03.12 21:38:00,000 kernel: standard timeslicing quantum is 10000 us
    06.03.12 21:38:00,000 kernel: mig_table_max_displ = 73
    06.03.12 21:38:00,000 kernel: TSC Deadline Timer supported and enabled
    06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    06.03.12 21:38:00,000 kernel: calling mpo_policy_init for TMSafetyNet
    06.03.12 21:38:00,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    06.03.12 21:38:00,000 kernel: calling mpo_policy_init for Sandbox
    06.03.12 21:38:00,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    06.03.12 21:38:00,000 kernel: calling mpo_policy_init for Quarantine
    06.03.12 21:38:00,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
    06.03.12 21:38:00,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
    06.03.12 21:38:00,000 kernel: The Regents of the University of California. All rights reserved.
    06.03.12 21:38:00,000 kernel: MAC Framework successfully initialized
    06.03.12 21:38:00,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
    06.03.12 21:38:00,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
    06.03.12 21:38:00,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
    06.03.12 21:38:00,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    06.03.12 21:38:00,000 kernel: [ PCI configuration begin ]
    06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 6689
    06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
    06.03.12 21:38:00,000 kernel: console relocated to 0xf10010000
    06.03.12 21:38:00,000 kernel: PCI configuration changed (bridge=16 device=5 cardbus=0)
    06.03.12 21:38:00,000 kernel: [ PCI configuration end, bridges 12 devices 18 ]
    06.03.12 21:38:00,000 kernel: mbinit: done [96 MB total pool size, (64/32) split]
    06.03.12 21:38:00,000 kernel: Pthread support ABORTS when sync kernel primitives misused
    06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
    06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
    06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
    06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
    06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagementClient: ready
    06.03.12 21:38:00,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffebc9f3e; max speed s800.
    06.03.12 21:38:00,000 kernel: BTCOEXIST off
    06.03.12 21:38:00,000 kernel: wl0: Broadcom BCM4331 802.11 Wireless Controller
    06.03.12 21:38:00,000 kernel: 5.100.98.75
    06.03.12 21:38:00,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
    06.03.12 21:38:00,000 kernel: rooting via boot-uuid from /chosen: C48C5E4E-3694-3F9E-87F9-351F848CEC3F
    06.03.12 21:38:00,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    06.03.12 21:38:00,000 kernel: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    06.03.12 21:38:00,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500325ASG Media/IOGUIDPartitionScheme/Customer@2
    06.03.12 21:38:00,000 kernel: BSD root: disk0s2, major 14, minor 2
    06.03.12 21:38:00,000 kernel: Kernel is LP64
    06.03.12 21:37:49,176 com.apple.launchd: *** launchd[1] has started up. ***
    06.03.12 21:37:59,329 com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
    06.03.12 21:38:04,363 com.apple.pfctl: No ALTQ support in kernel
    06.03.12 21:38:04,363 com.apple.pfctl: ALTQ related functions disabled
    06.03.12 21:38:04,389 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
    06.03.12 21:38:05,090 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
    06.03.12 21:38:05,092 UserEventAgent: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12039
    06.03.12 21:38:05,092 UserEventAgent: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
    06.03.12 21:38:05,265 UserEventAgent: CertsKeychainMonitor: configuring
    06.03.12 21:38:06,000 kernel: Waiting for DSMOS...
    06.03.12 21:38:06,000 kernel: BCM5701Enet: Ethernet address 40:6c:8f:00:09:d9
    06.03.12 21:38:06,000 kernel: AirPort_Brcm4331: Ethernet address 68:a8:6d:4b:27:58
    06.03.12 21:38:06,000 kernel: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    06.03.12 21:38:06,000 kernel: IO80211Interface::efiNVRAMPublished(): 
    06.03.12 21:38:07,000 kernel: AGC: 3.0.16, HW version=1.9.23, flags:0, features:20600
    06.03.12 21:38:07,000 kernel: Previous Shutdown Cause: 3
    06.03.12 21:38:08,000 kernel: DSMOS has arrived
    06.03.12 21:38:08,000 kernel: ** Device in slot: SLOT--1 **
    06.03.12 21:38:08,869 com.apple.SecurityServer: Session 100000 created
    06.03.12 21:38:09,849 mds: (Normal) FMW: FMW 0 0
    06.03.12 21:38:10,000 kernel: macx_swapon SUCCESS
    06.03.12 21:38:10,622 airportd: _processDLILEvent: en1 attached (down)
    06.03.12 21:38:10,623 mDNSResponder: mDNSResponder mDNSResponder-320.14.0 (Nov 16 2011 01:16:56) starting OSXVers 11
    06.03.12 21:38:10,641 com.apple.usbmuxd: usbmuxd-263 on Nov 14 2011 at 18:58:10, running 64 bit
    06.03.12 21:38:10,000 kernel: Created virtif 0xffffff8014af6e00 p2p0
    06.03.12 21:38:10,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    06.03.12 21:38:10,654 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
    06.03.12 21:38:10,654 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    06.03.12 21:38:10,663 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    06.03.12 21:38:11,283 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    06.03.12 21:38:11,283 configd: DHCP en1: INIT-REBOOT transmit failed
    06.03.12 21:38:11,304 configd: setting hostname to "Saschas-MacBook-Pro.local"
    06.03.12 21:38:11,308 configd: network configuration changed.
    06.03.12 21:38:13,000 kernel: en1: 802.11d country code set to 'DE'.
    06.03.12 21:38:13,000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    06.03.12 21:38:15,057 com.apple.SecurityServer: Entering service
    06.03.12 21:38:15,080 systemkeychain: done file: /var/run/systemkeychaincheck.done
    06.03.12 21:38:15,090 configd: network configuration changed.
    06.03.12 21:38:15,091 configd: network configuration changed.
    06.03.12 21:38:15,192 mDNSResponder: D2D_IPC: Loaded
    06.03.12 21:38:15,192 mDNSResponder: D2DInitialize succeeded
    06.03.12 21:38:15,217 UserEventAgent: ServermgrdRegistration cannot load config data
    06.03.12 21:38:15,220 UserEventAgent: get_backup_share_points no AFP
    06.03.12 21:38:15,000 kernel: MacAuthEvent en1   Auth result for: bc:05:43:a0:ff:1d  MAC AUTH succeeded
    06.03.12 21:38:15,000 kernel: wlEvent: en1 en1 Link UP
    06.03.12 21:38:15,000 kernel: AirPort: Link Up on en1
    06.03.12 21:38:15,000 kernel: en1: BSSID changed to bc:05:43:a0:ff:1d
    06.03.12 21:38:15,000 kernel: AirPort: RSN handshake complete on en1
    06.03.12 21:38:15,632 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    06.03.12 21:38:15,696 netbiosd: Unable to start NetBIOS name service:
    06.03.12 21:38:17,000 kernel: AppleBCM5701Ethernet:        0        0 setFixedSpeed - logic error, speed any?
    06.03.12 21:38:17,595 configd: network configuration changed.
    06.03.12 21:38:17,596 ntpd: proto: precision = 1.000 usec
    06.03.12 21:38:17,727 configd: setting hostname to "saschas-macbook-wlan.fritz.box"
    06.03.12 21:38:17,755 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
    06.03.12 21:38:17,755 UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
    06.03.12 21:38:17,774 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Compound_Blank_10 because it is protected and not on the exception list
    06.03.12 21:38:17,777 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
    06.03.12 21:38:17,778 configd: network configuration changed.
    06.03.12 21:38:17,891 loginwindow: Login Window Application Started
    06.03.12 21:38:18,000 kernel: AppleLMUController found an AG vendor product (0x9cb7), notifying SMC.
    06.03.12 21:38:22,191 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    06.03.12 21:38:22,719 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
    06.03.12 21:38:22,894 airportd: _doAutoJoin: Already associated to “Compound_Blank_10”. Bailing on auto-join.
    06.03.12 21:38:22,948 com.apple.SecurityServer: Session 100005 created
    06.03.12 21:38:22,950 loginwindow: Login Window Started Security Agent
    06.03.12 21:38:23,023 SecurityAgent: Echo enabled
    06.03.12 21:38:23,023 SecurityAgent: Echo enabled
    06.03.12 21:38:23,702 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    06.03.12 21:38:29,733 SecurityAgent: User info context values set for Sascha
    06.03.12 21:38:29,733 SecurityAgent: User info context values set for Sascha
    06.03.12 21:38:30,733 SecurityAgent: Login Window login proceeding
    06.03.12 21:38:30,733 SecurityAgent: Login Window login proceeding
    06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | name = Sascha, path = /Users/Sascha, homeLoc = (null)
    06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter setNeedsToUnmountDirVolumeAtLogout:] | mounter calling mechanism to setNeedsToUnmountDirVolumeAtLogout to 0
    06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | urlAttribute = null
    06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | homeDirPath did NOT follow a symlink, keeping original path of: /Users/Sascha
    06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | homeDirMajorType = 1
    06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountStandardDirectoryForUser:atPath:attributes:] | name = Sascha, path = /Users/Sascha, homeLoc = (null)
    06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMechanism isGuestAccount] | enter
    06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMechanism isGuestAccount] | Guest account check returning 0
    06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter setHomeDirType:] | setHomeDirType to 1
    06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter mountStandardDirectoryForUser:atPath:attributes:] | returning 0
    06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | returning 0
    06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism invoke] | mountHomeDirectoryForUser returns 0
    06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism updateAndUnlockKeychain] | updateAndUnlockKeychain
    06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism launchHomeDirFixerToolIfNeeded:] | launchHomeDirFixerToolIfNeeded called with 0
    06.03.12 21:38:31,286 loginwindow: Login Window - Returned from Security Agent
    06.03.12 21:38:31,308 loginwindow: USER_PROCESS: 37 console
    06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
    06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.AddressBook.PushNotification': unknown error code
    06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.safaridavclient.push': unknown error code
    06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.syncdefaultsd.push': unknown error code
    06.03.12 21:38:31,379 airportd: _doAutoJoin: Already associated to “Compound_Blank_10”. Bailing on auto-join.
    06.03.12 21:38:31,486 com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    06.03.12 21:38:31,676 com.apple.launchctl.Aqua: load: option requires an argument -- D
    06.03.12 21:38:31,676 com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
    06.03.12 21:38:32,033 UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 25095
    06.03.12 21:38:33,566 com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[131]) Exited with code: 1
    06.03.12 21:38:33,691 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
    06.03.12 21:38:33,691 com.apple.dock.extra: 2012-03-06 21:38:33.689 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
    06.03.12 21:38:33,691 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
    06.03.12 21:38:33,691 com.apple.dock.extra: 2012-03-06 21:38:33.691 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
    06.03.12 21:38:33,692 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
    06.03.12 21:38:33,692 com.apple.dock.extra: 2012-03-06 21:38:33.691 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
    06.03.12 21:38:33,692 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
    06.03.12 21:38:33,692 com.apple.dock.extra: 2012-03-06 21:38:33.692 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
    06.03.12 21:38:35,005 appleprofilepolicyd: appleprofilepolicyd: profiling drivers not loaded, loading
    06.03.12 21:38:35,044 com.apple.launchd.peruser.501: (com.facebook.videochat.Sascha.updater[173]) Tried to setup shared memory more than once
    06.03.12 21:38:35,671 UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2)  file was /private/var/servermgrd//servermgr_certs.lock
    06.03.12 21:38:35,673 UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2)  file was /private/var/servermgrd//servermgr_certs.lock
    06.03.12 21:38:35,673 UserEventAgent: CertsKeychainMonitor: ready to process keychain & timer events
    06.03.12 21:38:36,318 com.apple.launchd.peruser.501: (*****-SharedServices[174]) Exited with code: 1
    06.03.12 21:38:36,711 Firewall: java is listening from ::ffff:0.0.0.0:0 proto=6
    06.03.12 21:38:49,925 coreservicesd: *** process 57 exceeded 500 log message per second limit  -  remaining messages this second discarded ***

  • Not able to do GR for STO delivery with packing.

    Hi All,
    Hi All,
    I am not able to do GR for STO delivery.
    I am getting the following error:
    Data for creating a delivery is incomplete (Vendor)
    Message no. M7279
    Business scenario:
    STO between two plants of same company code with packing material.
    Sales Org(Supp)-4444
    Sales Org(Rec)- 3333
    Plant(Supp)-2003
    Plant(Rec)-2002
    ME21N->VL10B->PGI->VF01(Proforma)->MIGO w.r.t outbound delivery(error)
    Note: PGI with packing material-separate line item generated for packing material-movement type for main material-641 and for packing material-601)
    with regards
    Azeez.Mohd

    Hi,
    When the stock is going to be moved between two plants or two storage locations that are under single company code called as stock transfer order business process. Receiving plant raises the purchase order with supplying plant; supplying plant delivers the goods to the receiving plant by raising sales order.
    Config Steps
    Create Vendor: Transaction code: XK01
    Assign Plant to Vendor
    Go to change mode of Vendor [XK02]
    Specify Vendor number that we created in the previous step
    Define shipping data for plants
    Create material by maintaining u201CPurchasingu201D view: Transaction code: MM01
    Extend the material from XXXX to YYYY plants
    As we are extending material from plant XXXX into YYYY plant, system copies all the data into the new plant.So that we have to change the delivering plant in delivering plant field as YYYY in Sales: Sales organization data 1 view.
    Create Purchase order: Transaction code: ME21N
    Activities due for Shipping (Purchase order fast display): Transaction code: VL10B
    Display stock in transit: Transaction code: MB5T
    Goods receipt: Transaction code: MIGO
    Stock movement types: INTRAand INTER
     INTRA
    Stand order type (Document type) = UB
    Delivery type = NL
    Determination of document type:
    Supplying plant + Receiving plant = UB
    Supplying plant + UB = NL
    Movement types:
                      Issuing plant Receiving plant
    Single step    647                        101
    Two step        641                        101
     INTER
    Standard order type (Document type) = NB
    Delivery type = NLCC
    Determination of document type:
    Supplying plant + Receiving plant = NB
    Supplying plant + NB = NLCC
    Movement types:
                            Issuing plant Receiving plant
    Single step              645               101
    Two step                 643                101
    PBXX is the Gross price condition type for Stock Transfer Order
    Vendor = Supplying plant
    Customer = Receiving plant
    NOTE: In single step method updations takes place in both plats simultaneously.
    In two-step method updations should takes place manually.

  • Zero quantity should not be allowed for STO delivery

    Hi,
         zero quantity should not be allowed for STO delivery.
         when i create a delivery for a STO it should not allow zero quantity
         can someone throw some light.
    Alec

    Hi,
    Please maintain the "B - Create Delivery with qty greater than Zero" in Part.dlv./item  in shipping tab page of the customer of site.
    more briefly: in WB02 --> click on the customer of the site --> Shipping Tab page --> Maintain B (Create Delivery with qty greater than Zero)
    Regards,
    Srini

  • 1 ASN is only for 1 delivery(line item)??

    Hi,
    1 ASN is only for 1 delivery (line item)?
    or others??
    Thank you.

    Am i understand right in below way??
    ASN is for 1 delivery. ASN is for whole delivery and this delivery might contain many line items.
    ASN is an confirmation of shipment of this whole delivery.
    thanks.

  • Not creating inspection lot for STO

    Hi ,
    I have two plants X(Supplying) and Y (Receiving).
    In material master in quality 01 and 08 (inspection type) for plant Y active.
    Process as folllow:
    1)STO with U (acc assignment) created.
    2)VL10B ,created delivery.
    3)Vl02n PGI
    4)Migo GR for STO did in plant Y.
    but stock is not going in quality instead of this it is going in unrestricated.
    Guys please throw some light ,why system is behaving like this.
    Regards
    Sowmya

    Hi,
    In your STO purchase order in Delivery tab check if  stock type is " X Quality Inspection"
    Check in Material master updated inspection types 01 and 08 are checked as active
    In material master quality view Post to inspection stock check box is active
    Thanks
    Diwakar

  • My microphone is not working but only for calls

    I had my Iphone working perfectly until I updated to 4.3.1 after that I lost the microphone but only for calls when I use Skype, Video recording and may other features that uses microphone all of them worked. I did restore again to 4.3.1 and make a new fresh installation without recovering my data so now I'm not only without phone features but also need to load all of my data again. This occurs most of the time but about 2 of 10 calls the people can hear me so I think this must be related to baseband update or hadware issue.

    Might try setting the option in System Preferences > Sound > Input tab > check "use ambient noise reduction"
    Regards,
    Captfred

  • PGI reversal issue for STO Delivery

    Friends,
    While I am trying to reverse the PGI using VL09 for a STO delivery, I get an error " E M7 022: PU withdrawn quantity exceeded by xx Ton : Material, plant and storage location".
    Looked at the OSS notes but could not arrive at the correct one.
    Please help as this is an urgent issue.
    Thanks and Regards,
    Ram
    Edited by: Ram Murthy on Apr 25, 2008 2:13 AM

    If you are shipping from, for example, plant 100 to plant 200 then when you PGI in100 the inventory is immediately placed into plant 200 inventory in special stock "in transit". If the two plants are in different company codes then it is placed into "In transit CC".
    Please check in transit stock is sufficient to be reduced by the cancellation of the PGI.
    Regards,
    Brian

  • SERIAL number field to be identified for a delivery.

    Hi Experts ,
    I need your help for following.
    I need technical detail (Table-fieldname) for serial number , when a goods issue for serialised item is done.The same can be seen in VL02n =>Extras=>Serial Numbers.
    SERNR field is there in lips table but it is blank for the delivery number.Please let me know how can i find the serial number for a particular movemnt type and delivery.
    Thanks

    Hello,
    First check your customization of Serial number for delivery, whether this is maintained or not.and if it is maintained then check last number.
    use tcode SNRO.
    there also you can simply find out the field by pressing F1 on related field.
    Have a Nice Day,
    Regards,
    Sujeet

  • Not picking the stock for the delivery

    Dear friends,
    Though the stock is available, it is not getting picked for the delivery.
    Can you guide me what are the things I should check to solve the issue.
    With regards,
    Atul

    Hi,
    If the picking tab is grayed use T.Code LT03.( IF ware house management is activated).Here fill the ware house number and plant and mention the delivery note number also. Now use The T.Code TCode VL02N here u can see the system automatically picks the required quantity.
    If the picking tab is not in gray mode mention the storage location and the plant correctly. Even though the system is not picking the quantity check the Picking location determination with rule MALA.and also check any open orders are crated for the particular material .
    regards,
    vas.
    Message was edited by:
            v.s.vas.

  • Right click context menu does not appear only for Java 1.7, AWT TextField

    I have been debugging some issues that an application has been having with Java 1.7 versus older versions. A new problem I have encountered is that the right click context menu does not function in any TextField. It works fine when running/compiling it with any previous version of Java. I have tried coding a simple test with a Frame, Panel and TextField to see if it might be something else in the more complex application that was causing it, but the simple test class has the same problem.
    I have searched for other people having the same issue, but I have not found anything comparable. This seems like a huge change from one version to the next and I am surprised that I am not finding this mentioned anywhere else. Can someone point me to anything that discusses this issue that I am having? Does 1.7 require I implement my own context menu? I realize AWT is old technology, but this is an old, fairly complex application that doesn't use swing, and that is not going to change at this point.
    My simple test:
    import java.awt.*; 
    import java.awt.event.*; 
    import java.util.*; 
    class testF3 extends Panel 
      public static void main(String args[]) 
        Frame f = new Frame(); 
        Panel p = new Panel(); 
        f.setLayout(new BorderLayout()); 
        f.add("North", p); 
        TextField tf1 = new TextField("", 20); 
        p.add(tf1); 
        Dimension medm = f.getSize(); 
        medm.height = 100; 
        medm.width = 200; 
        f.setSize(medm); 
        f.setVisible(true); 
    } 

    In the past few days since upgrading to 4.0.4, the entire right-click context menu for links is gone and replaced with one item: "Copy Link" The "Open In New Tab" item, along with some other context items, is no longer there.
    That's actually a problem with your particular installation of Safari, b. I've got all the contextual menu entries with my 4.0.4.
    I helped fix one of these recently here at the forum. Try the procedure from the following post (it got back Tho's missing contextual menu entries):
    http://discussions.apple.com/thread.jspa?messageID=10598385&#10598385

  • Is it possible to make a screen control appear only for a specific patch?

    I use MainStage almost exclusively for guitar. Frequently I will use different guitar amps in different patches (usually the AmpliTube plugin, but occasionally Amp Designer). I'd like to use different screen controls for specific patches. For example, I might be using a Marshall JCM900 amp model for one patch, and a Vox AC-30 Top Boost amp model for a different patch. The Marshall has a gain control, and a master volume, but the AC-30 only has a master volume. Conversely, the AC-30 has a top cut control that doesn't exist on the Marshall.
    Is there a way to hide the screen control for the Marshall gain on a patch that uses an AC-30 model?
    It seems like there would be many, may scenarios where controls that are relevant to one patch would be undesirable with a different patch, but it seems like screen controls are global for an entire concert. Sure, a given control can be mapped to different parameters in different patches (but you can't give a screen control different names in different patches), but there's limited space on a layout, and it seems wasteful to have to provide a given screen control that might only be relevant for one patch out of a dozen in a given set or concert visible in every single patch.

    Hi
    Standard Screen Controls will always appear in Edit Mod and in Perform Mode for a given Concert. Controls that are not assigned to any parameter will be grayed out in Performance Mode. To do this, select the control in Edit, and choose "None" in the Screen Control Inspector.
    Smart Controls adapt for a particular Patch. Different layouts can be assigned per patch.
    ericmurphysf wrote:
    you can't give a screen control different names in different patches)
    That depends on the method you used to name them in the first place:
    Controls can have different formats of labelling ( done in Layout mode), where they can show the particular parameter name etc etc. These can change from patch to patch.
    You can assign a "Hardware Label" that is global.
    Separate Text labels can have global or Set/Patch labels, and they can be labelled for a single Patch by overriding any higher level labelling
    hth
    CCT

  • Twitter link--page appears only for a moment

    On the homepage for my disabled grandson there is a link to twitter. All of a sudden it no longer works. When you click on the link the twitter page appears momentarily and then disappears. Eventually the stars appear at the top, but nothing else.
    Because I wasn't regularly checking the link, I'm not sure whether this happened after my upgrade from iWeb 8 to 9. I've tried deleting the link and starting over, but that didn't help.
    Drew's family members love the twitter link so I would appreciate any help.
    Thanks!
    www.drewbie.info

    Just in case someone else has this problem, I just solved it by checking "open link in a new window." I didn't have it checked in 08, but for some reason it was the solution in 09.

  • The Item is not relevant to Billing for STO

    Hi
    I have created stock transport order (STO) for one plant to another plant, both plants belongs to the same company code. The scenerio is intra company stock transport. After creating delivery Doc.type NL, I want to create Proforma invoice. While Creating billing document Proforma invoice F8 against outbound delivery the system is giving error msg The Item is not relevant to Billing.
    I have also cheked in item category NLN, billing relevance is "D".
    Need your valuable suggestions
    Regards
    Vinod

    Hi Vinod,
    i have the same problem, can you tell me what you have done.
    i am creating the proforma invoice but the value in it is always 0.
    thanks in advance for you help.
    regards,
    sundeep

  • When I open Gmail in Firefox, the secure (padlock) icon appears only for a few seconds; the connection then recycles and goes to the triangle alert icon.

    When I open or refresh Gmail in Firefox, the secure padlock icon appears at first, but within a few seconds the connection then refreshes itself without me opening anything or moving the mouse. The secure icon is then replaced by the alert triangle, which displays a message when I hover over it saying "This website does not supply identity information." I have already changed the Images setting to Ask Before Displaying External Images, but it had no effect on this behavior. This same change happens on other secure websites, but not as consistently it does on Gmail.

    If there is mixed passive content (e.g. images) then Firefox shows an exclamation mark instead of "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location bar.
    You can open the Web Console (Firefox/Tools > Web Developer) and search for lines with [mixed] to see if that allows to identify the mixed content.
    *https://developer.mozilla.org/Tools/Web_Console
    *https://developer.mozilla.org/Security/MixedContent

Maybe you are looking for

  • UDDI Error  while creating a new connection

    Hi, Iam trying to add my uddi of my 9ias R2 (windows) to my jdeveloper 10g connections. But when I provide the location of the uddi in the "create UDDI registry Connection" and then Test the connection I get the following error: Client Error The inqu

  • X1 Carbon 2014 Function keys not working in windows7

    Hello. I have a brand new X1 carbon(model: 20A7-005KMD) that was installed with our company image, running windows 7. Alle drivers in device manager has been installed, and system update is updated. The carbon has the "touch" function keys and they o

  • How to delete cloud from pc

    how to remove icloud from my library

  • Asking for credit to make a call

    I have called this persons skype name a number of times but i keep getting that I need credits to make the call all of a sudden.  I have even had to sign out a few times before to make it work but now thats not working also. Attachments: Screen Shot

  • Project Manager Trimmed Temp File Location

    Hello, I recently tried to trim down a 100GB project. I had 8GB left on my harddrive, and the project manager said the final project would be 7GB, so I took the chance and started trimming. Unfortunately, I ran out of diskspace during the trim, and t