Serial # not able to type letters

its not possible to type in letters of my serial number to license my product in the adobe application center. i only can  type in the numbers but then 7 characters are missing (the 7 letters). how am i supposed to continue?

Redemption Code Help
Mylenium

Similar Messages

  • I am trying to authenticate at Filevault preboot using external Serial (RS232) to USB convertor where USB port is connected to my mac machine.But on preboot I am not able to type the password using console where my machine is connected.

    I am using an external keyboard which is actually a Device KeyAT who do the keyboard simulator kind of operation over Serial (RS232) to USB connector.
    I have a controller machine connected with Serial Port and MAC machine is connected by a USB port to that device.
    I am able to type the password on OS X login screen but on using the same device and set up on Filevault preboot I am not able to type the password.
    This connector is detected as a USB 2.0 composite device in System Hardware table.
    Can someone hints or point out a potential cause or to rectify this issue.
    Thanks in Advance.

    Which os version are you using? 
    Which iPod Nano model do you have?  iPod Models 
    iPod not recognized in iTunes and Mac desktop 

  • V490 server not able to type at ok prompt

    Hello Guyz
    The problem is that when I power on the server with max diag post it will drop at ok prompt with all post result passed. But I am not able to type anything at ok prompt. Input device & Output device are set to ttya when checked from os console. Since autoboot parameter is true it will boot automatically when i do a normal power on. RSC is not configured and I am not getting anything on it. Also graphics card not available in server.Troubleshooting steps done till now.
    1. Powered on server in normal mode and with disk drives removed. It will stop at ok prompt with error cant boot. But not able to type anything.
    2. Replaced PCI riser card which includes NVRAM.
    3. Tried powering on the server with all minimum configuration possible still no luck.
    4. Swapped the only one system board to other one and checked.
    My seniors suggested to replace system board. What you guys think? Please help. Thanks..

    midhu wrote:
    I am using putty software and cisco cable with usb-to-serial converter which is connected to ttya port of server on one end and usb port on my laptop for getting the console of server. Also I am using default baud rate which is 9600.That all seems fine, except...
    Historically, USB-to-serial adapters will often just fail to function in such circumstances.
    There are numerous posts in these forums that go bazck more than a decade (through migrations from old Sun forums, even) that mention such USB adapters. They're not necessarily broken to where you need to replace it. They often just do not work. They won't send/receive the duplex signals you hope to have so that `send` at the laptop becomes `receive` at the V490, and `send` at the V490 becomes `receive` at the laptop. The symptoms are as you described: you can see but not type, or you can type but not see.
    I suggest you go beg, borrow, or claim by eminent domain an old computer that has an actual hardwired serial port and try again.
    I know. All this shouldn't be that hard, and it's frustrating. It should "just work".

  • Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

    Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

    Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:

  • Not able to type a password when trying to create a domain

    Hi,
    I am trying to create a domain and in that wizard, in Administrator name and password for weblogic user, I am not able to type the password. Whatever I type it doesn't get reflected in the UI . if I press Next button Error comes as password is mandatory. I am using Linux OS.
    P.S. I am able to type in Name and description fields.
    Kindly advise.
    Regards

    If anyone else face this issue, then here comes the resolution -
    Password Field Not Editable in Domain Template on Linux
    Bug: 10394900
    Added: 01-May-2011
    Platform: Linux
    On Linux, when creating a new domain using a developer template in the Oracle Fusion Middleware Configuration Wizard, the password and confirm password fields are not editable, and you cannot enter a password to create a domain.
    Workaround: Do one of the following:
    To work around the issue each time it occurs: Click the close window "x" button in the upper right corner of the Configuration Wizard. In the confirmation dialog that appears, click "No" to return to the Configuration Wizard. Now you can enter the password and confirmation password.
    To fix the issue permanently:
    Kill a scim processes. For example, kill "pgrep scim"
    Modify (or create) the file ~/.scim/config to include the following line:
    /FrontEnd/X11/Dynamic = true (follow case sensitivity)
    If you are running VNC, restart the VNC server.
    Run the Configuration Wizard again.
    Regards,
    Anuj

  • I installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

    i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

    Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
    Regards,
    Steve

  • MacBook Pro - After Battery dies I'm not able to type in login window, until forcing a restart

    Hi, as mentioned in the header : MacBook Pro - After Battery dies I'm not able to type in login window, until forcing a restart
    After the battery drains to 0% the computer switches off.... *Makes sense*
    Once I put the charger power chord back in for an extended period of time I hit the power button and then see the login screen.... *Makes sense*
    However it won't let me type into the login box therefore having to force a restart and lose any saved data or data open when it died of battery. *WEIRD*
    This happens every time my computer runs out of battery. I understand that obviously not letting the laptop die is a good idea, however it seems like there is something wrong as it allows me to login yet won't let me type anything...
    Any solutions? Anyone else experience this?
    I have an early 2012 MacBook Pro - 15 Inch Screen.

    Hi s4mboy,
    Thanks for visiting Apple Support Communities.
    I'd start with resetting the SMC and PRAM on the MacBook Pro:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/ph11243
    Cheers,
    Jeremy

  • Not able to type in arabic in reports builder 6i

    hi
    i have the language arabic in my PC ie i am able to type word documents in arabic,
    i have to do arabic report in apps 11 i ,the report builder i have is 6i
    i set NLS_LANG to ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256 in the registry before opening reports builder but still i am not able to type in arabic in reports builder 6i
    kinldy guide me
    thanking in advance

    Hi,
    i set NLS_LANG to ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256 in the registry before opening reports builder but still i am not able to type in arabic in reports builder 6iWhat do you mean by you are not able (is it garbage or you cannot use the Arabic keyboard)?
    Can you view any Arabic report (labels/text/data ..etc)?
    Regards,
    Hussein

  • I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

    I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

    Hi,
    ( I search for iChat questions when I have finished in the iChat Forum)
    So the menu bar reads iChat, File,  Edit,  View, Buddies, Video, Window and Help
    There is no Buddy List open.
    There is no other window for iChat open.
    In the iChat Menu you only have access to Status.
    Is an item ticked in the list ?
    Is this a green (Available item) or  Red ( an Away one) ?
    Can you access the Accounts option ?  (Sitll in the iChat Menu)
    Is anything in here ticked ?
    In the Window menu any Logged in account should appear in the list  (Between the Next Chat and File Transfer items)
    It would be useful to know which version of iChat this is.
    If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
    As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option  (you can use it in earlier OS versions if you want)
    Type in:-
    ~/Library/Preferences
    Find the file called com.apple.ichat.plist
    Drag it to the Trash and Restart iChat.
    This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
    9:23 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Actuals in P6 Professional - not able to type them in?

    This must be a simple one
    I'd like to be able to store actuals against the resource assignment, in the resource assignment window.... but it's greyed out. Any suggestions as to why?
    This client is using version 6.2.1 - I cant seem to find anything about this online and every YouTube video I've seen glosses over it, as if no-one wants to approach the obvious subject.
    I can change the budgeted units, change the remaining units... I can add a column in the resource assignments layout, but not amend it on the spreadsheet.  is that just the way it is?  Or am I missing something...?
    Blue line highlighted below shows where the actuals have been added, I'd like to be able to type them into the spreadsheet and see them appear there too!

    Took a look and this is from the online help:
    Use the Resource Usage Spreadsheet to display resource usage over time. You can display spreadsheet fields for budgeted or planned, actual, or remaining values, or you can customize the spreadsheet fields. If you have the appropriate security privilege, you can manually enter/edit values for budgeted or planned and remaining (early) units. To show or hide the Resource Usage Spreadsheet, click the Layout Options bar, then choose Resource Usage Spreadsheet, or click on the Top Layout toolbar.
    Since it specifically leaves out Actuals I am guessing its not possible. You would have to submit it for a feature request.

  • I am not able to type in word,what is the solution?

    I am using os yosemite after installing it I could never able to type anything in word.

    You should contact Microsoft for Mac Support  and/or post in their forums.

  • Why am I not able to type into my pdf files. Why is the cursor only appearing at he areas where there in no typing? I believe I know who's doing this, but can you fix the problem for me please?

    I cannot type into one of my pdf files. The cursor only appears where there is no typing. I believe there is foul play going on on my computer, Can you fix this problem?

    Hi Donna,
    Let's see if we can get to the bottom of this mystery! I hope it's not foul play.
    You say the problem is with just one of your PDF files? What version of Acrobat/Reader are you using? If you're in Reader, you're limited to commenting/annotating the PDF (you can't edit text with Reader, so you wouldn't be able to select text that's in the PDF already).
    Please let me know what program/tools you're using and we can take it from there.
    Best,
    Sara

  • Why am I not able to type in new URLs in the location bar either in my current tab or any new tab in the middle of my session? I've never had this problem with any other version of Firefox.

    For example, I had several tabs open in Firefox 4 just now. For no apparent reason, when I opened a fifth tab, I couldn't click on the location bar or type anything into it even with repeated attempts. I either have to start Firefox again or try going back to a tab that is already open with a page loaded and type into the location bar there. That worked for me to be able to get to this website. This is very frustrating and seriously hampering my ability to use Firefox--which I have previously always been impressed with. I have a 2 year old Dell Optiplex 755 running Windows Vista.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Not able to type body/subject in the mail ?

    Brand new iphone bought for Christmas. I start at Home where the mail app is at the bottom, I can write in the email address I want to send, but when I go to the body the key pad isn't showing up. (I'm using Yahoo email)
    Is it because I don't have a texting plan? or I don't know how to press it correctly? or what is it, is the phone broken? Please help.

    I would be inclined to connect your iPhone up to your computer and in iTunes click on your iPhone then click Restore. Assuming you have done that and that your iPhone's software is up to date then if it still doesn't work properly I would suggest that the best thing is to get it swapped out.

  • Not able to type in my password

    hello i got bb curve 8520 it was fine till last date , when i woke up in the morning and try to unlock my device my keypad get freez when i try to click on unlock it wont let me how can i fix this problem ? 

    Is there buttons missing? Like the volume button and such?
    Mine done the same thing, its because one of them buttons have stuck on, I just play about with it then it normally works fine!

Maybe you are looking for