Serial number and MMBE report inconsistent

Hi friends,
I have a situation wherein in IQ02, for a material and serial no. the entry is there .i.e. say a material M" has a Serial no.say S1 present in plant BOM, storage location1000.This is seen as I go to the S.No. history it shows the last transaction as :- a document no. with Mov type as 101 for the above mentioned storage location and plant on a particular date.
But if I go to MMBE, the same material is not found in the above mentioned plant and S.No.
Can you explain what could be the reason. How does the S.No. and material disappear form MMBE while the S.No. history of that particular material with M.Type 101 is available.
Please advise
Thanks and Regards
Rajeev

Hi
Even through you don't need a equipment and do not opted for "always create with equipment", you have to maintain number range for equipment.
Because, whether equipment is created or not, the EQUI table updation will takes place during creation of serial number.
Per each serial number, one equiment number is consumed, though it is not created.
Hence maintain number range for your euqipment in PM, your problem will be solved.
warm regards
sairam akundi

Similar Messages

Paid up and still in trial mode. Entered serial number and reports invalid

How can I resolve this issue. I have premiere CC on two computer that I want to sign out of one while using the other. There seems to be some issue doing this and now it is not accepting the serial number and stuck in trial mode.

Cloud programs do not use a serial number, they are activated when you log in to your Cloud account
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
OR
Asked to sign in after paying may help
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
or
http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

I have lost my ipod touch 4g 32gb i have the serial number and i dont know how to find ? plz help

i have lost my ipod touch 4g 32gb i have the serial number and i dont know how to find ? plz help plz plz plz plz email me if you want the serial key my email is [email protected]

Unless you had already set up
Apple - iPod touch - How to set up Find My iPod touch
there is nospecial way to locate your iPod, Apple will not help. Your SN is only good for identifying the iPod as yours if it is found.
Change the passwoard for all accounts used onthe iPod and report it to the police. Also see:
Reporting a lost or stolen Apple product

SWAP Equipment using IE4N, without serial number and material, it is possible?

Hi PM Experts, I´ve been reading about the way to SWAP equipments from his functional location without using serial number and material, I think if it is not possible, but to be honest, I cannot find any logical answer for it, since equipment number is unique for a plant. Does anyone have found any work around for it?.
I don’t want to use serial numbers and materials, because I think the process is really simple, since the client does not want to implement the refurbishment process. If there is a break down, here is what I do:
Case 1:
Dismantle damage equipment (Say PM01 Order Type)
Install new equipment (same PM order)
TECO the actual PM order
...Later
Case 2:
Create a new PM orden (say PM01 Order Type)
Repair the break equipment
TECO this new PM Order
Here are the inconsistencies:
What happen with the MTTR and MTBR reports?
In case one, I´ll create the material as equipment, while I´m installing, starting date for his master data is the installation day, and the MTTR and MTBR will start to run. This is ok.
What happened in case 2?, I need to stop the “clock” for the MTTR and MTBR of the dismantle equipment.
This is the reason why, I would like to use IE4N, but since there are no serial number and material, I cannot.
Can anyone please suggest a workaround for this scenario?.
I´m thinking in use INAC (Object Deactivated) system status, can this status help me?, Does this status “stops” the clock for MTTR and MTBR report?. If I change the status to ACT, I´ll get the clock back running?.
How about dismantle the equipment?, It will get the AVLB Available status, but the problem is, this equipment will be “floating” in the whole PM structure and I do not want it. I want to have it in a specific Functional Location but with this status, is this possible?. I woul like to use IE4N to SWAP UTs and later change the status to AVLB Available status, with and exits.
I thinking in an Equipment Status and a “Z” MTTR and MTBR report, based on this status. But to be honest, I´d like a standard solution for it.

For find my iPhone to work, the device has to be powered on and it has to be connected to a network (Cellular or WiFi). Find My iPhone uses your AppleID as the account to search for. Maybe the "guys" you were talking to were referring to a 3rd party application that essentially lo-jacks your device. But even then, it would still require Power and a network.
I don't believe that there is currently a way to flag a specific serial number for location.
Best of Luck.

HT1349 Need serial number and it is not showing up where it should be...

my iphone was lost (or stolen) and i need the serial number and IMEI number in order to report it to insurance company. However, when i go into itunes (10) and click on devices (as instructed), my iphone shows up in the list of devices...but when i "hover" over it with the arrow, ONLY my phone # appears. No other #s. Why? Could it be because I has the phone service interrupted? Or could it be that someone stole the phone and wiped it? It no longer shows up on my list of devices in icloud "find my iphone".
please help! thank you.

Hi Modular747,
Thanks for your question...I sure thought I had backed it up on itunes. In the "device" list under "preferences", it does show one back up for this phone -- and when I "hover" my mouse over the back up, the phone number appears...but not the IMEI number (and not the serial number).
Apparently I cannot report my phone lost or stolen without the IMEI number and I am at a loss as to how to find it on itunes. I don't have the packaging or invoice with me. I cannot figure out WHY the phone number appears and the other numbers do not. AT&T keeps telling me that the IMEI number must be there...but I just cant find it.
I also am confused as to why AT&T can't use the serial number to find the IMEI number.
Thanks for any further thoughts or suggestions.

"lost" my iPad. Will the GPS still work after battery dies? Also, how can I get the serial number for police report?

Please help! I "lost" my iPad at a local store. The GPS on my phone shows the iPad is still in the store (over 24 hours.) I've searched every square inch of the store and cannot find it. I fear it may have been "stashed" by an employee. The police need a serial number for a report. How do I get that? Will I still be able to locate it via GPS after the battery dies?

Did you register it with Apple? If not, you would have had to write it down. Once the device goes out of wifi or if the thief turns wifi off...its gone. All they have to do is restore it as new, you wont be able to detect it again. Sounds bleak I know but its hard to get it back once its gone...no matter what Apple says.
I really hope it turns up...I hate thiefs. Best of luck.

My ipad was stolen a few months ago just getting around to it i have my serial number and my receipt to when and where i bought it how can i track it

need to know how to track it and find where its been

You can't.
Well, if you had a .Mac account and enabled the "Find my iPhone" functions before it was stolen, maybe you could (I'm not sure how that all worked).
With a serial number and reciept, you can't track it.
You reported it stolen, right?

Stolen ipod on thursday. i have serial number and all other info

My ipod was 'stolen' this thursday at school. Today is tuesday. Is it not possible to track my ipod's current ip address with the serial number and such? And I did reported the missing ipod to my school. What else can I do? I can report it to the police. But how do I do that? And its rather late so I don't know if anyone will listen now. I'm already a couple of days late in reporting so the chances of me not ever finding my ipod is bigger. I also plan on contacting the Apple media helpline (408)-974-2042 and ipod technical support (800)-275-2273 tomorrow morning. Also, is the same serial number in my receipt engraved into my ipod?

I'll do exactly what you've said. To report it to the police. I will then have them call ipod technical support (800)-275-2273 because apparently if I give them my ipod's serial number AND someone happened to plug it into a computer, they can find it. I'm basing it all upon from a site that I read which is ( http://forums.ilounge.com/ipod-nano-1g-2g/165385-how-can-i-report-my-stolen-ipod -apple.html ) Even if the information was changed, as long as I have the original box, which I still do, perhaps I can do something about it C: I'm very hopeful. It wouldn't and it really isn't the end of the world if I don't find it. But I want to try my hardest in finding it.So I'll report it to the city police station near my school. Thanks for your time!

Invalid serial number and product name in g50

I just buy my laptop this last december and in bios it says that i had an invalid serial number and product name
what should i do to make it valid?
my friend said that it has an effect in chipsets and it bluescreened 4 times when win7 is the installed os and twice in win8.1
how to fix this?
Thanks in Advance

hi joedcomandante,
Welcome to the Lenovo Forums.
Just to verify, did you get the Invalid Serial Number and Product Name issue out of the box or you got this after you sent the unit for service?
Usually, when the motherboard is replaced, the Serial Number and Product Name is flashed into the BIOS and the EC (Embedded Controller) is updated. If you got the issue after sending the unit for service, I recommend you contact lenovo and report your findings as these information needs to be reflashed into the system.
As for the BSOD, were you able to get the exact error code?
Bug Check Code Reference
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Everything on my macbook 5.1 was erased and then the person who erased it could not find start up disc to reinstall. i called apple and gave them the serial number and they sent me leopard os 10.5 which is what originally came with the computer. not work

i was given a macbook 5.1 by my mom, being nice, she erased everything on it, but then could not find the original start up disc. i called apple and had the serial number and said that leopard 10.5 was the operating system that orginally came with it, so i bought it. when i got it,i turned on computer, put in dvd, and immediately shut it off, then turned it back on while pressing letter c. (they told me to do this) i can hear the disc turning but alls i get is blank screen then it shuts down, and restarts. nothing ever shows up on the screen. did i get a wrong disc? should there be something different than just the mac os x leopard 10.5 to get this computer to work again?? thanks for your help!

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was going to buy the one advertised on the website until I discovered it's only for students and teachers, which I am not. What should I do next as I need to use PDFs on a daily basis. Thanks! I would like to be able to download this and pay online. Possible? I currently have Adobe Acrobat XI Pro. I have a Windows 7 system. Please help!

As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly

HT1420 If someone stole my laptop how can I lock it so they can't get in? I have my serial number and part number

My ex took my MacBook and signed me out of everything he is logged into it with his Apple ID. I have proof of purchase how can I lock him out of it completely with the serial number and everything on the receipt I have?

You cannot

HT1349 I have an itunes account but it is not on an apple computer, it is on a Dell. How do I use your support section of the website as I can't enter a serial number and need that to progress??

I have an iphone 4S and have a ringtine app. This app needs me to have a ringtone option in the left hand menu of my itines. I do not have a ringtone option.
I ahve tried to use the support website but as my itunes account is not on apple hardware, it is on a Dell laptop, I can not get a serial number and therefore can not progress. How do I get the necessary serial number to allow me to the support section?

iTunes>Preferences(under the edit menu if using Windows)>General>Show>Tones.

My iPhone serial number and IMEI is not the same as Apple server

Hello,
My problem started when I want to unlock my iphone 3gs via Imei.
My old iphone broke about a month after i bought it (it was 2 years ago), so i sent it to Movistar to change it (i think that they sent it to appleCare). Now Movistar told me that i have to send the old iphone imei in order to unlock the iphone i have now, i ask apple for the repair order receipt, then i received an email and i could see the information about the 2 iphones: the old broken one and the new one.
Then I realized that the iphone they sent me as a replacement (the new one) is not the same iphone i have. The serial number and the Imei are different, so, should apple change this data in their server in order to unlock my iphone or what can i do to solve it?
There is any formal way to perform this data change?
Thank you in advance,
Francisco Marzabal

Here we work with repairs for devices that does not have waranty (expired or other issue). In this case, I did the screen replacement. No other ipad was on my station, the ipad arrives, i took it change the glass, put everithing back, give to customer. Thats it. The job was done by me, the customer test his ipad in front on me, works fine, everything ok. Few days pass and he came back saying that it wasn't his ipad, he brings the box that the ipad came and ask me why the serial number does not match the serial number in the box (sorry NOT in the back of the ipad).
There were no other part changed only glass. After 7 years working on this, thats the first customer complaining about a work done here. After this I was curious and look for more information and some forums, also one port here is claiming that the serial number on the device is not the same as the box where it came.
I just want to make sure that there are possibilities that there could be such mistake during the packaging process.
Thanks for the replies

HT201471 Why can't I just type in my apple serial number and identify which ipad that I have?

Why can't I just type in an ipad serial number and find out what model it is? This used to be a function of the Apple Tech Specs. Why has it been removed? If it is in a different place, where is it?

Have you tried here? This will tell you which model of iPad you have when you enter the serial number.
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Serial number and MMBE report inconsistent

Similar Messages

Maybe you are looking for