Serial number in sample management

Dear gurus
Can I use serial number in sample management to maintain the uniqueness of the sample.
Kindly help
Thanks
MK

1.In the task list
a) define the sample drawing procedure.In sample drawing procedure you have to define the type of sample you needed.
b) in the header below sample drawing procedure ,define the Inspection point based on the sample mgt.
c)At the char level define the sampling procedure for each char/mic.
Now activate the serial number profile in the Material master as per normal procedure.
Make sure that you active the serial number tick in the inspection setup.
This will create the samples &  you can do the RR ,defect recording as per the serial number & sample mgt.
I hope this will add some value
Regards
Sujit

Similar Messages

  • Serial number in inventory management

    Dear experts ,
    I have  assigned serial number profile in material master .
    While doing a GR i ticked the create serial number automatically & the system assigned a serial number to the material .
    I want to know , where do u define & assign the number ranges that the system will pick in case of automatic serial number allocation .
    Also how can i have external number assigned for serial number .
    Moreover  how can i check the stock based on serial number ( report t codes )
    Regards
    Anis

    Hello Anis...some i can answer...
    1.External Number assignment can be done using :IQ01 :Create Material Serial Number,this can be created Prior to GR and can be assigned to Material at GR.
    2.You can look into the stock by using MMBE tarnsaction,just Execute you material,Plant Stores...
    Select the stock level and go to Environment and select Equipment/Serial Number from drop menu to display alll sreial Number assignments.
    Hope this helps
    Arshad
    Edited by: arshad ahmed on May 22, 2009 11:36 AM

  • Error when doing GR for production order with serial number

    I'm not familiar with serial number and equipment management but I'm trying to help my user resolve this issue.
    This product is returned from customer site.
    I saw that this material is being reset in IQ02 from status in warehouse to become Available when the material is consumed in the production order via 261 movement type. So now the status is available. Then the user went to change a new serial number. Later, GR for production order is done in MB31. Errors are encountered when prompted to enter the new serial number.
    Configurations XX01 and XX02 are different
    Message no. CX126
    Configuration of serial number SN02 incompatible with document item
    Message no. IO226

    Hi..
    Can you please explain in detail, I facing same problem, while assigning unrestricted stock to sales order.
    Regards,
    Sumit Pukale

  • Serial number receiving for a rework order

    Scenario:
    I have one piece of equipment which is serialized and I need to rework this.So i create a rework order issue the material serial and batch number and would like to receive the reworked product with the same serial number but a different batch.
    Can anyone please give me a detailed config description
    and also we are using a custom movement type in mb31 for receiving, so does that mean that this movement type needs to be assigned to a flow type group in serial number movement attribute management?
    I think this is standard SAP for example when we have a subcontracting order and send a serial number out we would like to receive the same serial number back in.In the same way I think we should be able to receive the same serial number with a different batch using a rework order.
    Gurus please throw some light on this issue.
    Thanks

    I have checked the subscription you had purchased and it is for English only.
    Could please confirm me the install language of Creative Cloud.
    If it is other than English then make it "English(International)" from prefrence of Creative Cloud.
    Please refer following screenshot to change the launguage

  • Serial number control

    I want to have a control on not receiving a return on a serial number which I have not sold before. How can I do this? Is there a user exit? Also I don't want to be able to sell a serial number from the consignment stock which I have not sent to the customer'sconsignment stock. How can I have those controls?

    Hi,
    Go to t-code OIS2
    Select serial number profile which you speciefied in material master i.g. 0002, then click on serialization pricedure(at left side),
    Now in pront of procedure SDRE (MAINTAIN RETURN DELIVERY) maintain as 01 (None).
    it means when u create return delivery system never generates serial number.
    For second one explore serial number in inventory management.
    kapil
    Edited by: Kapildev Farakte on Dec 10, 2009 4:11 AM

  • Satellite L300-21F - Where can I find the serial number?

    The ink on the silver toshiba serial no./model no. panel on the back of my laptop rubbed off after only a week of use when i bought the pc last year. I am now having a problem with my touchpad not registering finger-cursor movements or strokes at a normal applied pressure. I have to press harder much of the time for the action to be registered. A third of the time it works fine at normal pressure.
    It is still under warranty. Unless anyone can tell me of a possible reason for this[anyone?] then I guess I should probably send it in for repairs.
    Where can I find the serial no. information? Is it stored electronically on windows anywhere? I have only a rough idea of what the serial number is - i managed to write down most of it when i noticed it had started to rub off. I don't think my laptop is registered online and I don't have the paperwork that accompanied the laptop in its box.
    Thanks for any help
    null

    Hi
    Im really wondering that you cant read the serial number on the bottom side anymore after one week only Where do you use the notebook?
    Anyway, I have Satellite L300 too with Windows XP preinstalled. If I start Toshiba PC Diagnostic Tools I can view all details about my notebook and also see the serial number.
    Check this!!!

  • What is the difference between Serial numbers and Batch management.

    Hi Gurus,
    Can anyone explain the difference between Serial Number and Batch Management in breif.
    Regards
    Ravi

    Hi,
    Serial number management and batch management are different functions that can be
    used in conjunction with each other.
    A batch represents a non-reproducible subset
    of the total quantity of a material held in stock, which is managed separately from
    other subsets of the same material.
    For Example  Different production lots
    (for example, paints, wallpapers, pharmaceutical products), delivery lots or quality
    grades of a material.
    whereas a serial number is a number that you give to an individual item of material in addition
    to the material number, in order to differentiate between this individual piece and all
    other items of the material. The combination of material number and serial number
    is unique. It is not necessary to use the batch management function to use serial
    number management.
    Regards
    VIjay.

  • Inventory Tracking & Inventory Posting for Serial number managed items

    Hi,
    Plase advise me to address this issue..
    My scenarios is : - hand an item whih is serially managed, purchase 2qty and it serial number is 'S1' and 'S2', in a delivery document had selected 'S2" and physically issued 'S1', ineed to correct serial number at the time of inventory counting..kindly advise...
    thanks in advance..
    Nobin

    HI Raghu ,
    as you are setting other properties like itemcode and warehouse, u will find batchnumber and batch qunatity(after u press Lines. ) see the sample locally at ..Program Files\SAP\SAP Business One SDK\Samples\COM DI\VB.NET\04.SerialAndBatch.  , if u have )
    the sample updates the batch table in loop, whereas I used to give all the required batch quntity at once.
    U have to make it sure that the item is managed by batch ( if a field in oitm called 'ManBtchNum' is found 'Y' then only go ahead with defining batch number and batch quantity else , ur document will not simplly get posted and no error will be thrown)
    also remember that since it is goods issue, u have to have the batch existing in the database (oibt table) with the defined batch quantity.) 
    hope it helps.
    regards,
    Binita Joshi

  • My CreativeCloud manager won't connect to the internet. As a result it can't verify my serial number for Adobe Acrobat XI.

    I followed the trouble-shooting steps for this issue, to no avail (Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC). The back story is that I was an independent contractor working for a company and had my own CreativeCloud account. I've since been hired and my boss has opted to purchase a license for Acrobat instead of a CC subscription. He bought the license a few months back, right around the time I cancelled my subscription. But now, the machine I have been using this whole time (PC, Windows 7) is saying I need to renew my subscription when I attempt to run Acrobat. When I click the links, 'Subscription Manager' or 'Have a different Adobe ID?', I get a spinning wheel that eventually times out and tells me 'Please connect to the internet and retry'. At one point I uninstalled the program and reinstalled it, at which point it asked me for a serial number, which I have. I entered the number and as it was trying to verify, it timed out and gave me the same 'Renew your subscription' message.
    Any help would be greatly appreciated. This has been very frustrating.

    Hello - Is the issue still pending

  • Batch Split for Material which are activated with serial number management

    Hello All,
    We have requirement where we want batch split to be mandatory during goods reciept with inbound delivery  for material which are serial number managed.
    Please let me know the possible solution to achive this requirement.
    Appreciate your quick response.
    BR,
    Tushar

    I have resolved this issue by myself. Check out the link where I have briefed how to resolve the issue using bapi BAPI_OUTB_DELIVERY_CHANGE.
    BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
    Regards,
    Senthil G.

  • Reinstalling, Application Manager says the serial number is invalid.

    Let's start at the beginning: my hard drive crashed and I got a new one in my desktop iMac. I was able to save most of my files to an external harddrive, but none of my programs. I knew from previous experience with Adobe products that I could download a trial version and enter a serial number later. So I went to my Adobe account to look up what version of CS I had been running before, and it was 5.5 like I had thought, and the serial number was listed there as well! Yay! Then I went and downloaded the trial version of CS 5, not seeing a trial download of CS 5.5 available. I go to open up Photoshop, get the Adobe Application Mannager window giving me the option to either start a trial or enter a serial number. I entered the serial number associated with my previous version of CS 5.5, but then the Application Manager told me that "This serial number is not valid for this product," despite this being the correct serial number straight from my Adobe account.
    Now, I realize the problem might be that I was running CS 5.5, not CS 5, which is why it's running into this problem. If this is the case, I am even more at a loss for what to do, since I did not see a trial version of CS 5.5 available. If this exists, please please link me to it!! However, if there is a way for me to get a new serial number, that would be great too!
    Thank you!

    if you follow all 7 steps you can directly download a trial here:  http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
    and activate with your serial number.
    if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

  • Adobe Application Manager Keeps Asking For Serial Number

    I bought CS6 Design Standard a few days ago, and although I have already validated the software, these last couple of days every time I open Photoshop, Adobe Application Manager thinks I am using a trial version and asks me to choose between continuing this trial and licensing the software. After I enter my serial number everything works fine but it is a nuissance to be entering the serial all the time. I never even had a CS6 trial installed on this computer before. Is there a way around this? Is this happening because of my firewall settings? Any help is appreciated. Thanks.

    Hello there,
    Rather than starting a new thread, I prefer to pile up on this one.
    I have the same problem. Quite regularly, Adobe Application Manager (AAM) ask me if I want ot carry onthe trial or enter a license. I entered my license so often that I know it by heart now.
    I'm under OSX 10.6.8 (iMac desktop), French language (same for CS6 standard).
    I have only one user, and it is an "administrator".
    Rather than asking about privileges, what are the files this application manager need access to? Where are they located? Which file? Who should be the owner and what should the permission be on those files? Would a "Repair permission" fix this for these application files (i.e. non system files)?
    Thanks in advance for any help.
    Pierre
    PS: The same CS6 is installed on a laptop under 10.8.2 (with same serial). I use it rarely. But there it does not seem to have the same issue. So far, AAM did not ask for serial again and keep updating happily.

  • Equipment serial number status management

    Hello All,
    I have a case:
    We have the status management of the equiment serial number  for instrument.
    Material number: 8000001
    Equipment Number: 300026058
    Serial Number:Q090909
    Each goods movement  will update the status and the stock information of the equipment, and the specifically operation can be done at each status.
    We had purchased this equiment from a affiliated company,and it had been sent to the consignment storage location, but two weeks ago,our logistic team returned an equiment to the vendor with this serial number Q090909, and the relevant status have been updated accordingly, now the system still show us there is an equiment at the customer side(due to we don't issue the consignment pick up order to get the physical goods from the customer), so we have to finish the consignment pick up order process,but due to the status issue of the serial number, we can't handled the equiment.
    And also we can't change the status with the transaction IQ02.
    Is there any other way to solve this problem?
    Thanks&Regards,
    Don

    Hi Don,
    If you have authorization then follow the steps given below
    Go to SE16 --> Table "JEST"
    There you have to enter the "Object number"
    Generally object number is like "IE0000000000XXXXXXXX"
    *XXXXXXXX = Equipment number
    If its not taking by the system then run JEST freely and see the pattern of object number and then enter your object number
    In my case I have found that the last eight number was Equipmnt number.
    Once you enter then on next screen, you will see 5 fields
    Client Object number            Status Status Inact. Change number
    In change mode put "X" in status Inact for every entry except the two givn below
    I0184
    I0188
    Regards,
    MT

  • Could anyone help me with Adobe Application Manager please? I write my approved serial number but can´t go further?

    I bought a Student version CS5 back in 2010 for my studies and it worked wonderfully until last week. Now when I try to open any of the Adobe programs, it takes me to Adobe Application Manager and asks for me to provide my serial number. When I write it, it´s approved but it still does not allow me to open any of the Adobe programs. Instead, it asks me again for the serial number. I called support and they confirmed my serial number is correct but they do not deal with CS5 over the phone anymore. Could anyone kindly help me through here please? Many thanks in advance.

    When I try to open any Adobe program, "Adobe Creative Suite 5 Design Standard - Adobe Software License Agreement" pops up. I press "Agree" and then it takes me to the next part: "Provide A Serial Number" because my trial had expired. I had never agreed to a trial back when I bought the CS5 package because I had the package, of course. And I have never had any troubles/messages to access my Adobe programs until last week. I called Adobe to confirm my serial number and it is correct but then the person could not help me further because they do not deal with CS5 over the phone, hence asking through here. Once I write the serial number, I get a green tick saying that "This serial number will be used for: Adobe Creative Suite 5 Design Standard". I then press "Complete" and it takes me all the way back to the "Adobe Software License Agreement". It has been this vicious circle over and over. I unistalled it, then installed it again various times using my serial number and ID, I don´t know what else to do and everyone I call they can not help me for some reason. So thank you very much for taking your time in helping me out.

  • Item Manage by Serial Number

    hello all,
    related to my question Service Module, Can i use the Service Module?
    what should i do if my item master data has an Onhand qty. and it is not manage by Serial Number, now i want to manage this item master data by Serial Number,but SBO Prompt me w/ the ff. message (You can modify the "Manage item by" setting only when the available quantiry is zero and there are no serial or batch numbers available).
    please advice what is the best practice and workaround for this scenario
    thanks ang best regards,
    Fidel

    Hi,
    You can't change the item master data manage by batch to manage by serial no.
    There are two solutions to solving it i.e.:
    A. First solution
    1. Good issue all the quantities of item manage by batch
    2. Change to manage by serial number after item stock on hand is zero
    if step A.2. is failed, use step B:
    1. Create new item code manage by serial
    2. Good issue all quantities of item manage by batch
    3. set on hold for item manage by batch
    JimM

Maybe you are looking for