Serial number in standard report

Hi
We are using serial number for most of the materials. Whenever material movement happens, system asks for the serial number. But the serial number which is used for this material movement is not appearing in any of the standard report - COOIS-Component/Documented Goods Movement or in MB51 or any other else.
Please guide how to insert the serial number field in all the material movement standard report.
Regards
Amit Parkhi

Hi,
No such a standard report available in SAp go for Z development.
Regards,
R.Brahmnkar

Similar Messages

Display of serial number in the report

Hi experts,
   I wanted the serial number in my report based on plant .I am getting it based on my sub divisions of plant .Also i wanted this column as the first while dispplayed in the re[port.
can anyone please suggest me a solution for this issue?

thanks syed but i want a new column in my report level based upon the plant like
1. aaa
2.bbb
but i get it based on the subgroup like
aaa asdf 1
         dfgh 2
         hjkl    3
bbb   asdf 1
         dfgh 2
         hjkl    3
the correct output what iam looking for is
1.aaa asdf 1
           dfgh 2
             hjkl    3
2.bbb   asdf 1
           dfgh 2
            hjkl    3

Supplier and Supplier Part Number in standard report BBP_BW_SC3

Hi All,
There is requirement like to add new fileds ,Supplier and Supplier Part Number in standard report BBP_BW_SC3(copy to z version).
From which table i can get these values in SRM system.
Please suggest.
Thanks & regards,
Rakesh

Hi Walter
Thank you so much for your reply, which indeed helped us to a great extent.
The solution works fine for my original example of A & B material. However, we want to find every combination of lower level material used in each rolled up material. In above example, if material B is used in C, and C used in D and D used in final product E.
The suggested functional module explodes the header material as per itu2019s BoM, and follows Top-down approach, whereas we are looking forward to find a link which shows Bottom-Up approach i.e. where-used approach. In above example, we want to start from lowest level material A, then B, and C till final product E.
Since the output of functional module has various fields so we are trying to find a field which helps up to establish the bottom-up approach for multilevel BoM materials.
Any inputs will be highly appreciated.
Thanks,
Nirav

"lost" my iPad. Will the GPS still work after battery dies? Also, how can I get the serial number for police report?

Please help! I "lost" my iPad at a local store. The GPS on my phone shows the iPad is still in the store (over 24 hours.) I've searched every square inch of the store and cannot find it. I fear it may have been "stashed" by an employee. The police need a serial number for a report. How do I get that? Will I still be able to locate it via GPS after the battery dies?

Did you register it with Apple? If not, you would have had to write it down. Once the device goes out of wifi or if the thief turns wifi off...its gone. All they have to do is restore it as new, you wont be able to detect it again. Sounds bleak I know but its hard to get it back once its gone...no matter what Apple says.
I really hope it turns up...I hate thiefs. Best of luck.

Add serial number in the report file name when using batch process model

I would like to append a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if I use NI BatchModel.seq as my process model.
Thanks!
Jacky

duplicate post
Ask your question only once.

Displaying serial number in the report output

Hi everyone
may i know hw can we display serial number inthe report output.

hi,
Assuming that you wanted to print the entries of internal table record by record ... do this way ...
loop at itab.
write : sy-tabix. " Record Position
endloop.
Regards,
Santosh

How to add Serial Number to the report name?

HI,
I'd like to add the option of including the SN to the report name. A good option will be to automatically set the default base name to the SN.
I'm open to suggestions. Either a simple solution where I'll always get the SN as the base name, or
a more complicated solution where I can really make some modifications to the report option dialog page to include that upon user selection.
Thanks
Rafi
TS3.5+CVI8.0
p.s. an example, if exist, will be highly useful (and appreciated of course)

That's okay... I can answer here as well...
Under Configure >> Report Option
UNSELECT "Store UUT Report in Batch Report File" first, then select "New UUT Report File for Each UUT"
New UUT Report File for Each UUT—Appends a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if you select Store UUT Report in Batch Report File.

Serial number and MMBE report inconsistent

Hi friends,
I have a situation wherein in IQ02, for a material and serial no. the entry is there .i.e. say a material M" has a Serial no.say S1 present in plant BOM, storage location1000.This is seen as I go to the S.No. history it shows the last transaction as :- a document no. with Mov type as 101 for the above mentioned storage location and plant on a particular date.
But if I go to MMBE, the same material is not found in the above mentioned plant and S.No.
Can you explain what could be the reason. How does the S.No. and material disappear form MMBE while the S.No. history of that particular material with M.Type 101 is available.
Please advise
Thanks and Regards
Rajeev

Hi
Even through you don't need a equipment and do not opted for "always create with equipment", you have to maintain number range for equipment.
Because, whether equipment is created or not, the EQUI table updation will takes place during creation of serial number.
Per each serial number, one equiment number is consumed, though it is not created.
Hence maintain number range for your euqipment in PM, your problem will be solved.
warm regards
sairam akundi

We had our MAC book Pro stolen and we registered it with Apple. Is there any way to recover the serial number for police reports if the receipt does not have the serial number on it? Thx

We had our Mac Book Pro stolen and have not been able to recover the serial number from our Best Buy receipt. We did register it with Apple during the set-up and downloaded music on it thru ITunes. Any chance we can recover the serial number from somewhere? Any details would be helpful. Thank you!

You can try going here, using the same AppleID you used on the machine:
https://supportprofile.apple.com/
You should see a list of all the devices registered to you

Cisco Prime Collaboration Assurance IPPhone 3901 no serial number report

Hi All,
I have installed Cisco Prime Collaboration Assurance in my office and try to create phone inventory report , so far no problem , but when i add IPPhone 3901 there no serial number in the report , I have enable web access on the phone , i can see the serial number by click the IP .
any help ?
Best Regards,
Tommy

Custom Report of Microsoft Product Serial Number

Dear all,
I would like to generate a custom report which print out all the microsoft product in our network, but I found that some microsoft product (office 2007, office 2010) can't not display their serial number in the report. Can Zenwork inventory scan get the Serial Number information??
Please help. Thanks!!

manng228,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How can i save my Test Stand report as the serial Number?

Hi, I'm using TestStand 3.0 and LabVIEW 7.0 I want to know how i can save my TestStand generated report as the UUT serial number. Thanks

Hi arj,
Within the Report Option in the Report File Pathname Tab is a control 'New UUT Report File for Each UUT'. Enabling this will include the Serial number in the Report Filename. Unfortunately its formated into the filename as '[serial number]'.
This is done in a step in the Process Model - Test UUTs or Single Pass. This step is called 'Determine Report File Path' which is a dll call to a function in modelsupport2.dll. This returns the full pathname to the report and stores in Locals.ReportFilePath.
So you have the option either modify the Locals.ReportFilePath or modify the Function in modelsupport2.dll and rebuild the DLL.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

Adding batch serial number to report file name in sequential model

Hi,
I'm using a Sequential model in TS 4.0 and have learned how to add the UUT serial number to the report file name. But I would like to add the batch serial number instead. Is this possible? Any modifications to the ReportOptions callback seem to only modify the temp report name.
Thanks!
Chris

Hi Chris,
While Paul's suggestion may be useful in this case, if you would like the flexibility of customizing your Report File Pathnames further, you may want to consider upgrading to TestStand 4.2.
In TestStand 4.2 we introduced predefined macros and the ability to use custom expressions to specify the Report File Pathname. For example, the <Batch> macro will add the Batch Serial Number to the Report File Pathname as you specify it.
Please see the Using Expressions to Customize Report File Paths section of the TestStand 4.2 Reference Manual for more information on these new reporting features and how one might use them. For a specific explanation of the different macros and what they might be used for, please see the Specifying Report File Paths by Expression section of the TestStand 4.2 Online Help.
Manooch H.
National Instruments

I want to change serial number in the Batch report and in the special UUT report

I use Batch Model, sequential mode.
I want to change serial number in the Batch report and I want to change UUT serial number in each TestSocket report.
I overrided ModifyReportHeader, I did
Parameters.UUT.SerialNumber = "....."
but the serial number changed only in the Batch Report, not in UUT Report. How can I change serial number in UUT Report too?

Marta,
There is actually a ModifyBatchReportHeader in addition to the ModifyReportHeader that you already used. That would be the first thing to do.
After that, I think I need a more detailed description of what you are trying to do (perhaps with screenshots) in order to be able to help effectively.
Josh W. | National Instruments | Applications Engineering
Josh W.
Certified TestStand Architect
Formerly blue

Standard SAP serial number

if I use internal number range for serial number, will standard sap generate the same serial number for two different materials?
lets say, for the first time i am create a production order for a material for 1 pc.
SAP generated serial number 1 for Mat A
then if I create production order first time for MAT B, will the serial number start with 1 for this material or will it start with 2?
Thanks

I do understand what you mean.
Anyways since you've decided to do this with internal numbering which the standard system does not support, ask your basis person to get you the access code, so you can modify the standard program.
But yes, as with all customer modifications, it will be your responsibility to manage the life cycle of this code, as SAP would not do that nor ensure any compatibility.
If you want SAP to do that, then get in touch with SAP Consulting.
So good luck with your development.
Added
To your new update, all I would say is it requires a review from a business process standpoint. Using which type of serial numbering will be an outcome of that. So if you've not firmed the BPD, then it makes little sense to get working on which type of serial numbering you want for these new sets of materials coming from the newly acquired plant.

Serial number in standard report

Similar Messages

Maybe you are looking for