Serial Number Input on VL01N screen

Hi,
I am facing the following issue on the VL01n screen, when serial number is input for the material using a bar code scanner.
The problem is, it accepts just one serial number for the material and then closes the screen. The requirement is that if there is more than one material in VL01n and if the serial number is input, then instead of closing the window, it should go to the next serial number field.
For example, if there are 3 materials in delivery, the serial number is getting fed for the first material and then the serial number window closes out. Is there any way by which the closure of this window is avoided until the serial number is fed for all 3 materials.
Your help will be highly appreciated.
Thanks in advance,
Zaman

I'm from Brazil and I had a similar problem. I bought an iPhone 4s directely from Online Apple Store here in my country, and everything was ok until then (serial numbers did match). About five months later I had this problem with the power button and I went to an authorized center and claimed for another device. The service was really fast and good.. in about 3 days I had I my new device (that they gave me wrapped in plastic and out of any box ... but it looked brand new.... is that normal?) . I just took my phone e came home satisfied.
Six months later (still under warranty) my wi-fi just stopped working from day to night. I came back to the same authorized a claimed for another phone and got really surprised when the attendant said "The serial number that is on your phone does not match with the number here in our system" (they had two serial numbers in their system: my first iPhone and the one replaced.. the second was suposed to match, but it didn't) . I told him that this was impossible, cause I didn't leave my phone to any repair or switched to anybody, and explained what happend before. If there was a mistake, it was their mistake .. Nobody checks serial number when receving a new phone (from now on, I will). They probably gave the phone that I was suposed to recieve to another person and I recieved another one, or there was a labeling problem at the factory. When I said that I heard " This is impossible, sir". The fact is that makes me wonder about this new phones that they replace us, are the really new ?  But this is as discussion for another topic. How that particular iPhone was with me was a mistery for them and they took it for investigating my problem.
However, now since 14/05/2013 I'm without my iPhone and they are still trying to solve my problem.

Similar Messages

  • Disable Serial Number Field in MIGO Screen

    Hi all,
      I want Disable Serial Number  field in MIGO Screen how do i disable ?
    is there any user exit or enhancement ?
    Anybody please tell me.
    Thanks
    Regards,
    S.Muthu.

    S. Muthu
    Apply Transaction Variant and Screen Variant through transaction SHD0 for MIGO. Hope it will solve your problem.
    Otherwise, discuss this requirement with MM Functional Consultant. In SPRO, it may have some setting to make it display...
    Thanks & regards
    Amol Lohade

  • Trying to update to Photoshop elements on my Apple Computer but it says I have to enter the serial number in the trial screen. I cannot find this.

    Trying to update to Photoshop elements on my Apple Computer but it says I have to enter the serial number in the trial screen. I cannot find this.

    Stephaniek092682 what version of Photoshop Elements are you trying to install?

  • How to Put Serial Number in "UUT Information" Screen

    Hi guys!
    I'm reading the Serial Number using a Cemera and a 2D code on Units, and I would like to put the serial number in the corresponding box of "UUT Information".
    At this time I'm puting the serial number on Report using "RunState.Caller.Locals.UUT.SerialNumber".
    I need to keep the "UUT information" screen on front.
    Thank you

    When I click "Next UUT" (without a serial number on the box), I'm reading the serial number using Camera and LabView signal procesing, I would like to write the readed serial number to UUT information Box...
    It's any way to do that without modify and overide the PreUUT?
    Thanks

  • Hide serial number from LabVIEW startup screen.

    Is there any way to hide LabVIEW 2009 serial number from startup screen?
    Corporate version, but every visitor can see it. Bad.

    This goes along the same lines as this issue.
    I would recommend you submit an idea to not show the activation code on the startup and about screens. I agree it is sufficient to show these only in the license manager.
    I always struck me as odd to show the number on the startup screen. It is not needed there.
    In the meantime, you might want to startup LabVIEW before the visitors arrive or before you hook up the projector and start the presentation.  
    LabVIEW Champion . Do more with less code and in less time .

  • Serial Number Input for FCStudio2

    I just installed Final Cut Studio 2 and everytime I open anyone of the applicatiions it requests my Name and Serial Number. Has anyone else experienced this? How did you solve the problem?

    I'm in Cincinnati. There are appearently a lot of Grimmms out there. Took me a long time to get this name.

  • Serial number error

    I have a problem with my products activation.
    I have the adobe creative suite 5.5 design standard and when i want to re-install my products they told me my serial number is not valid for this product.
    Thanks for all your answer.

    Hi Ali,
    Checking the details of the serial number mentioned in the screen shot, it looks like you are trying to install the product in English language where as the serial number was purchased for French Language. I would request you to kindly download the French Installer for this product and try again.
    ( For your reference the pic has been removed as it shared the serial number.)
    Cheers,
    Kartikay Sharma

  • How long after submitting the serial number does it take to receive your Mountain Lion download code?

    I bought my new MacBook Air on July 19 and received it on 26 and on that day I followed the steps to apply for the up-to-date program for Mountain Lion.
    I finished the process and got to the final page, where upon successful completion of the forms you receive a reference code. I left that page for a few minutes and went back to copy and write down the code but the page had incurred an error and when I tried to refresh I was sent back to the start of the application process.
    After completing the same steps, I got to the serial number input window and clicked 'submit' but alas, it stated that 'This is an already claimed serial number.' as I had previously entered it on my first attempt.
    Anyway, I didn't receive any kind of confirmation email for my application and as I have mentioned, there is no way for me to recover my reference number for the first time I filled out the form.
    Has anyone else had this same issue and/or not received a confirmation email for their successful submissions and how long does it generally take to receive the Mountain Lion redemption code email from Apple?
    Thanks.

    Contact the Mac App Store Customer Service:
    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • Serial number validation

    When I put my serial number in at the screen prompt I get the message "we are unable to validate this serial number for adobe photoshop cs6" I installed this on my other laptop about two years ago and now i want to install it on my second laptop. what do I do?

    Please refer:
    https://helpx.adobe.com/x-productkb/global/find-serial-number.html
    This would help you in confirming your Serial. If it still does not solve your issue then contact Activation Support:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html
    Click the Chat Now button at the end of the page and talk with a live agent who would resolve it ASAP.
    Regards,
    Ashutosh

  • I need to find my serial number for a unit that I have registered.  It was stolen and I can not find the case it came in.

    Where can I find the Serial number if the unit was stolen?

    From an apple support page:
    iTunes
    Connect iPod to your computer.
    When iPod appears in iTunes, select it on the left side of the iTunes window under Devices.
    Click the Summary tab, and your iPod's serial number will display on screen. For iPod shuffle (1st and 2nd generation), click the Settings tab.
    If your iPod is not currently connected to your computer, but has been connected to your iTunes library before, follow these instructions:
    Hold down the Control key and choose Help > About iTunes (Windows) or iTunes > About iTunes (Mac).
    Release the Control key.
    As the iTunes and QuickTime version information scrolls, you will see the serial number of the last connected iPod as well as the last connected iPhone's serial number and IMEI.
    Tips:
    Hold down the Option key (Shift key in Windows) to reverse the scrolling.
    Press the Space bar to pause the scrolling.
    You can copy this information to the Clipboard and and paste it into a document.
    In Mac OS X, choose Edit > Copy (or Command-C).
    In Windows, press Control-C.
    Note: In iTunes, when you view the iPod serial number, you can choose Edit > Copy to put the serial number on the Clipboard. You can then paste the serial number into an email or web page (for registration, for example).

  • Cant get my serial number :-(

    Trying to install PS Elements 10 for the first time... entered the redemption code to get my serial number and the error screen is telling me that " The redemption code you entered does not exist". Not sure how to find my serial number now.... This is the first PS i've purchased so hopefully I can get it fixed pretty quick..... Any ideas are greatly appreciated....
    Thanks so much..

    You'll probably have to contact Adobe support:
    http://helpx.adobe.com/contact/
    Due to the holiday weekend, it might mean waiting until Tuesday.
    Ken

  • FCP 7.0 upgrade problem recognizing serial number

    I am upgrading from FCP 6.0.6 to 7.0 on my new MacBook Pro but I can't get the installation disc to recognize the serial number. If I enter an incorrect number it will immediately say so, but when I enter the correct number I just get the spinning wheel. I've tried reinserting the disc, restarting the computer, etc. etc. but nothing will get it past the serial number page. The computer meets all the system requirements for 7.0. Also, I did successfully use the 7.0 disc to upgrade FCP on my MacPro desktop machine so I know the installation disc is not defective. Any ideas?

    Thanks but that did not solve the problem. So, I went back in and uninstalled FCP 6.0.1 (following instructions on the Apple site) and reinstalled it. FCP 6.0.1 works fine but the upgrade still fails to get past the serial number input. I have another 7.0 upgrade disc here at work so I tried it to be sure it's not a problem with the disc. I did get a different result with the other disc: after inputting the 7.0 serial number, another prompt opened and asked me to input the original serial number for 6.0, which I inputted. Then it too went into spinning wheel mode. It must be searching for something and can't find it???

  • Reinstalling Acrobat.  Installation claims the serial number is not valid.

    Here is my serial number details
    Here's what the screen says
    <Image removed by Moderator for revealing serial number>
    While the product screen says its version 10 and the setup screen says v11, it ran as 11 on the startup screen on my old computer before it died.
    What am I doing wrong?

    The installer is incorrect.
    Try to install the Acrobat 10 pro from adobe.com or http://helpx.adobe.com/download-install.html
    Hope it helps.
    Regards
    Rajshree

  • Inbound IDoc for Sales Order Creation with Serial Number

    I would like to create Sales Order with Serial Number input at Item Level using IDoc. I have tried to use the followings:
    1) Basic Type : ORDERS05
    2) Message Type : ORDERS
    3) Process Code : ORDE
    I have used segment E1EDP19 with the followings:
    1) QUALF = '014'
    2) IDTNR = Serial Number
    However, it fails. It seems that the system just expects us to input BOM explosion number (VBAP-SERNR) instead of the Serial Number that I want.
    If we use VA01, we can input the Serial Number from Menu: Extra --> Technical Objects.
    Is there any idea what should I do ?

    The error message is "Entry 1276 does not exist in SNUM - check your entry" (Message no. 00058).
    1276 is the Serial Number that I input. It treats the Serial Number that I input as the BOM explosion number (VBAP-SERNR).
    Regards,
    Alan.

  • HT1349 What's my iPhone serial number? The one I typed in was rejected!

    I copied the serial number right off the screen of my iPhone, and the Apple website tells me it's not a valid serial number. What's wrong?

    How to find the serial number of your Apple hardware product.

Maybe you are looking for

  • Help in File-To_IDOC scenario

    hi.. all! iam trying to do the file to IDOC scenario with an integration with R/3 system.. i tried all the possible parameter settings but i cldnt connect with r/3 system.. can any one help me in this. tnx in advance vijaylaxmi

  • Save forms WITH filled in info

    Hi there, The company I work requested me to create forms to be sent to their customers for them to fill in. As you know, by default, the Reader doesn't allow one to save the info they fill in. Obviously, we can require from all our customers to by a

  • Determination of Basic price in MIRO

    Hi How to redetermine the Purhase order condition after doing MIGO..? Currently we are trying to achieve to capture the basic price of the material in MIRO. but system is calculating the basic price as well as the excise duty in MIRO. But we would li

  • I want sort items in region by date? How do it?

    Standartly items in region may be sorted by author and size, how i may sort it by date? Reply, please!

  • Hiding passwords behind **** in command line.

    Hi, I am coding a program that needs a password, and I want to hide it but I just can't find the proper way. I've tried jline to no avail, I couldn't get it to work. Any ideas on ways to hide a password behind ****? Thanks, bto.