Serial number issues. Only 30 days left?

Hello
I just purchased a new computer on Saturday because my previous computer's hard drive was shot so I had to re-install all my old software and so after I re-installed Photoshop Elements on this computer I got a pop up saying I only have 30 days left because my serial number has been used more than 2 times? I have only installed this software once before and it was on my previous computer. I need this software for my schooling so PLEASE help me!
Thank you!

See this:
http://forums.adobe.com/thread/1030438?tstart=0
If you go to the page linked there during business hours, you can usually start a chat session and get this resolved right then.

Similar Messages

I just bought the MacBook Pro 13" and it says I have Adobe Lightroom 5, but when I try to register it and put serial number , it only has 6 boxes. Do they mean serial number of my computer because thats 12 digits

I'm trying to register Adobe Lightroom 5 on my new 13" MacBookPro Retina. When they say type in serial number , theres only 6 boxes. My macbook has 12 digits so I can't advance to next question. what am I doing wrong. It sayd that the adobe Lightroom 5 is on this macbook pro...Can someone help ?

Did you buy this directly from Apple or from elsewhere. I've never heard of Lightroom coming pre-installed so it sounds like you MBP might not really be "new."
Enter your serial number here to check the support status and see if the computer has been previously registered:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If you did not buy it from Apple and that site shows any purchase date other than yours (± a few days), return the computer to the fraud perpetrators who sold it, get your money back, and buy directly from Apple next time

CS4 Extended Serial Number issue

Hi
while registering CS4 Extended I have a problem. As Upgrade Version only CS3 Extended is shown, not my valid CS3.
Any ideas?

Serial number issues can only be handled by calling Adobe.
Bob

2 issues - Invalid Serial Number issue & Lightroom 5 Trial vs full version folder hierarchy question

Hello
not sure if I should split these two questions...
1 - Invalid Serial Number issue
I'm helping out a friend with their large photo collection and they bought Lightroom 5 and received the serial number but when we add this to Lightroom it states that it's invalid - I tried leaving it until the following week (I visit them weekly) and it still refusing the number - when I went into their Adobe account and took a look at downloads the option to download the full version is greyed out (or an x - I'm not sat on their computer right now so can't double check) but it wouldn't allow me to do anything so we just had the trial version.
anyone know what the issue is - shall I get them to contact Adobe to get them to take a look - I also had issues trying to find a customer support email address lol. (I seem to faffing with lots of websites/software/companies this week so getting a little frazzled!)
2 - Lightroom 5 Trial vs full version folder hierarchy question
This question is linked to the above i- I am wondering if the folders in Lightroom are different in the trial version vs the fully paid version.
I had set up some greeting card templates and contact sheet layouts for my friend and tried to transfer them to her computer but whilst, LR 'sees' the folders it just doesn't acknowledge the templates - I tried it several ways but I've not had that issue before so will that sort itself when I get the serial number fixed?
Thank you for any help or suggestions - hope you all have a good weekend :-)
Lenny

Hi Lenny, the two questions may be related but the trial is actually the same as the full version. I would suggest getting the serial number issue sorted out first. There have been known issues where a paid for product still shows up as a trial.There is not a lot the community can do. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Lightroom
2. Serial number issues or activating my product
3. Click on the blue button: Still need help? Contact us – then click the button marked “chat now”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away.
Click here to get help now Contact Customer Care

Serial number issue in STO PGR

HI
I am facing serial number issue after doing PGR
i am into STO process . Oce PGI for outbound delivery is created and then MIGO (PGR) will happen at recveing pant
issue is after MIGO (PGR) the serial number status must be in AVLB ..but it is still in EDEL ESTO ...
The AVLB status must come automatically in the equipment master.

Hi
I am doing through PO...we don't have inbound delivery process ... so i do MIGO with reference to PO
We have equipment master IE01/2.. plant is assigned after MIGO reeving plant is getting updated in the equipment master but the serial number status is not getting changed to AVLB.... also the serial number profile is with MMSL procedure.

Is it possible to setup serial number format only accept 10 digits?

Hi,
I am using TestStand 3.0.
Is it possible to setup serial number format only accept 10 digits?
Also I want to input part number before start test. How to do this?
Thanks,
Ben

It's the modelsupport2.prj in components\models\TestStandModels\
There is also a preuutcallback.seq example in the shipping examples.

Material Serial Number Issue.

Dear Friends,
Material Serial Number Issue.
Its better to explain with the example.
Material Number : ABCD with serial number as 123456
There is a reservation for the Material ABCD from work order, now the warehouse person Goods Issues for the reservation ABCD with serial number 06-123456.(he issued wrong serial number)
Correction action - Reverse Goods Issue for serial number 06-123456, now Goods issue for correct number as 123456. But the systems doesnot allows the serial number, error Material ABCD 123456 is already installed. Thenin IQ09 the material ABCD with SNO 123456 is INSTL Status.
Now question.
1. In 1st place how system allows the Goods issue for particular reservation with different serial number?
2. Without issuing the serial number 123456, how the status changed to INSTL???
3. How to solve this problem, need to change the stauts of Material 123456 as ESTO, then i can do goods issue,. how to change the status??
Regards,
Saravanan.S

Hi,
Ask the workcentre to give that materail with 202 or 262 mvt to you. Now with the new reservation issue the required serial number material to site.
System does not have the serial number in reservation slip.Manually u are assigning it diuring the MIGO.
Ramesh

Error during GR posting. "Serial Number management only allows whole number

Dear Gurus,
Need your help regarding the error encountered during MIGO. Error M7172 "Serial Number management only allows whole number"
Based from the PO posted, Matl X has 50ea order quantity, however, the material master is maintained with a Base unit of OZ,
with this, conversion has been added to convert the EA --> OZ. and result will be 0.531OZ for the PO Qty in SKU.
Known that decimal places is not possible in conjunction to Serial Number Management.
May I just confirm if there could be settings that can be configured, so as to allow decimal values be used and assign serial number. Or is serial number should just be assigned per unit (meaning 1:1, one serial number per 1 whole value of uom)?
Thank you.
Bea

You can not maintain Decimal values for Serial Numbers..

HT4061 Is there another way to find the serial number with only your apple ID and password because apparently I never backed up my iPhone 5?

Is there another way to find the serial number with only your ID and password because apparently I never backed up my device on my computer?

If you registered it with Apple, you could try:
supportprofile.apple.com
Use your Apple ID and password to log in

Serial number management only allows whole numbers

Hi
If we have a material that has EA has basis unit of measure and KG for
order unit, when doing goods receipt against purchase order:
Situation 1:
Qty in Unit of Entry 1.000 KG
Qty in SKU 100 EA
Qty in Delivery Note 100 EA
No error message.
Situation2 :
Qty in Unit of Entry 999 KG
Qty in SKU 99,900 EA
Qty in Delivery Note 100 EA
and we get error message serial number management only allows whole
numbers. Quantity delivered is the same in basis unit so why is the
system producing the error message? Is there a way of avoiding this?
BR

Hi,
Serial numbers are maintained for quantity in base unit of measure.
In your example quantity is not a whole number (99,9 EA). 1 serial number is assigned to each unit; however system is unable to create serial number for 0,9 units here.
You cannot use serial number if you have units which have decimals.
Check serial number profile assigned to material in material master.
If stock check is not very important, try to change stock check setting to warning for serial number profile in IMG txn OIS2.
Best regards,
Ramki

Trial mode and serial number issue with Creative Cloud

Hello,
I recently bought a CC membership but I seem to be getting the same trial mode/serial number window others have been receiving when trying to open a Creative Cloud app. I've already spoken with two Adobe techs without any resolves. I've uninstalled and reinstalled CC, I renamed an OOBE file that the tech suggested I do and looked into the Language preferences. I'm on an iMac 10.8.4.
I'm really not technically minded but to me it seems like something continues to read my original CS6 trial I had previously. I've since uninstalled it but something remains perhaps My only thoughts at this point would be to make sure I have any recent files backed up then perhaps use Time Machine and revert back to before I installed CC then try installing again OR do the trial and hope once the 30 days are up it will read my paid account.
I would really appriciate any feedback. I've used far too many excuses at work having missed deadlines due to this issue.
Thank you

Okay, I think I have it solved *fingers crossed* by following this:
Mac:
1. Please click on "Go" and navigate to /private/etc
2. Open "hosts" file and check out for any entries for Adobe.com
3. Remove the entries and save the file
4. try again launching any product from CS6
Thanks
- Nitin
I did a backup of the hosts file and labelled it "hosts-backup" and put it on my desktop, then made another copy of the hosts file (since you can't alter the original). This time I removed ALL the Adobe entries and named the file "hosts", and saved that to the desktop. I then replaced the original hosts file with the altered saved version by dragging it into the etc folder.
I started up Flash cc and it worked! I've since downloaded PS cc and it's opened as well. I just hope it continues to function...

BIOS Serial Number Issue.

I am using Lenovo g50-70. When I type "wmic bios get serialnumber" on the command prompt.It is showing numeric values instead of alpha numeric. I already installed BIOS software, still showing numeric values. Please give me answers to my questions. 1) Is BIOS and Product serial number both are same? 2) Is BIOS serial number is numeric or alpha numeric? 3) Is there any possibility to put/change BIOS serial number as Product Serial number? If yes How can I? Please answer my questions and give me suggessions ASAP.Its very urgent to update BIOS Serial Number

Hi Marije,
Welcome to the Forums
As per the query we understood that you are facing issue with touchpad in your Lenovo G50 laptop.
Serial number will be alpha numeric, as you have mentioned it shows only numeric you can make a BIOS default, restart the system and keeps tapping f9 key and select make BIOS default option.
Can you share the snap shot of the BIOS through private message so that we can validate the issue.
Click here to send the private message.
Hope this helps. Do post back if the issue persists.
Best regards,
Ashwin. S

Third Party replaced Motherboard under warrantee, did a great job. Serial Number issue

IdeaCentre B500 Serial Number is reflected in bios as not matching since the MB changed today. Is that going to cause any issues with future warrantee work (which I don’t expect) and will it effect any other functions such as recovery is needed

No, not a refurbished phone. Brand new in the packaging from Vodafone. I am currently researching the alleged "third party hardware" and believe it is the dock connector that Apple claim they didn't put there. These retail at about £4.99. Believe me, if I had had a third party repair of a £4.99 piece of kit I would just do it again not take it to Apple to try and fix. There is no logic to it. I'm not going to go down the cynical route of the fact that this "intruder discovery" was made whilst the phone was out of my sight being worked on by their repair staff!?!?
I have also discovered there is no one to email at Apple to complain. The only suggestions appear to be phoning or the Genius Bar. Obviously, I've been to the Genius Bar to be told that they won't do anything because of this mysterious intruder in their phone.
Further, I am now in a position where I cannot dispute that the phone has been opened as it now has; by Apple. The staff admitted that before they opened it "it didn't appear to have been opened before" but they stuck by their "we won't do anything" stance upon their discovery.
I've got a photo of the inside of the phone and to my untrained eye everything appears immaculate. None of of the screw heads, numerous of which would have to be removed and replaced for the "intruder" to get in there, are marked in anyway. Can't see why anyone would go to the trouble.
The phone isn't even under warranty so it's not like I'm trying to get a new for old - I just wanted it fixed by the "experts".
Rest assured, I will get to the bottom of this.

Serial Number Issue - [URGENT]

Hello--
I'm having an issue with the Photoshop Elements 8 serial number.
I bought the Photoshop Elements 8 and Photoshop Premiere Elements pack, and activiated them.
At first, they worked perfectly fine, until I tried to open Photoshop, it said the serial number had been activated on two other machinies- But it's activated on mine and mine only.
Any help is appreciated.
~Thanks!

Flareon Spazz for activation issues you will need to contact our support team. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described.

Serial number issue for Acrobat in CS3 Web premium education edition.

Hi everybody. If anyone can help me on this issue, I would really appreciate it. So far, customer support hasn't been very useful. So here is the issue.
I bought CS3 Web Premium for my 2.16ghz macbook and it was purchased through apple. Anyway, it came with the main disc to install all the applications of cs3 and another disc to install acrobat 9. The way an education edition works is that I don't receive an actual serial number. I receive a product number which I have to enter, along with my info and proof of eligibility on this website called myidentit-e.com When this was all said and done, I received an email that contained a serial number. This serial number worked on all of the regular cs3 applications but not on acrobat 9. There was no other product code included and the directions inside the case said that I should be able to use the same serial number for both the regular cs3 and acrobat 9. Customer service's suggestion was to call apple since I bought it from them but what would they know about that? Adobe seals the products and I'm assuming that Apple is only a reseller.
Anyways, any help would be greatly appreciated. thanks!

We've also had this problem. It looks like neither Adobe, My Identit-e nor Adobe will take responsibility for fixing this. All CS3 programs work except for Acrobat, which won't accept the serial number.
Support requests to adobe have resulted in our request simply being "closed" without any actual response from the company.
Has anyone had any luck with obtaining help from any of these companies? Any advice is appreciated.

Serial number issues. Only 30 days left?

Similar Messages

Maybe you are looking for