Serial Number not suitable for movment

Dear Friends,
while doing PGI through movement type-601 we are getting error message "Stock Data for serial number xxxxx not suitable for movement"
please suggest.
thanks

Hi,
While doing PGI give the serial number which is assigned to your exsisting in stock.
Go To MMBE
and see which valuation stock and wich storage location you want to issue and righ click and check the equipment/serial number in system and give the appropriate serial number available in stock

Similar Messages

  • Stock data of serial number not suitable for movement

    We have a situation where we have had to put some serialized parts on a rework production order.  When we are trying to bring them back into stock, we're getting a message that says "Stock data of serial number not suitable for movement."  I'm guessing that this is because this serial number had existed in stock before (since this is a rework of an existing material/serial number.)  We need to receive this back into stock using this same serial number. How is that possible?
    Thanks in advance for your help.
    Sybil

    Dear,
    Please refer these threads,
    Re: Removing Serial number Profile
    IQ02 Shows Blocked Stock for Serial Number
    Hope it will help you.
    Regards,
    R.Brahmankar

  • Serial Number not suitable for movement  when doing goods issue  or sto ?

    Dear all ,
    I have a issue , when doing sto or goods issue ,
    i have a material code serial number profile is off physical quantity is laying 20  and my requirement  is active the serial no
    and  assign to  serial number  for the material ,
    Tcode is iq01 put the material , serial number  and category after save when i am doing  ma1a putting material ,quantity
    and that serial number click on save ,  geting error like
    Stock data of serial number 1234 not suitable for movement
    when i am checking iq02 serial number is showing but checking in  MMbe there is not showing
    Regards
    Shiv

    hello,
    to activate the serial numbers you first have to clear all the stock for this material (MVT 562 / 502 or other)
    Than activate the serial in the material muster.
    in your situation (if i understood correctly) what you need is:
    1.  disable the serial numbers for the material (move them to another material)
    2. deactivate the serial number in the material master
    3. get rid of all the stack - post it with  562 or 502
    4. activate serial numbers
    5. post the material back to stock - 561 / 501 - than the system will require a serial number for each unit

  • MIGO - GR - Others -- Serial Number Not saved for Movement Type : 561

    Hello,
    I am trying to post good receipt-other ( for movement type 561) using MIGO transaction. I have specified all required data.
    Also depending on the item qty., I entered serial number in serial number tab.
    Its creating document successfully. However if I try to display same document using MIGO, serial number is missing.
    I tried to debug the code and I realized its not saving serial number itself.
    For other movement type its creating document with correct serial number.
    If I repeat same process using same data using transaction MB11 its posting successfully and I can see serial number using MIGO transaction as well.
    One more thing which I've noticed is when I post document using MIGO, Account assignment details are missing. However with MB11 I can see account assignment data too.
    Would be really appreciated if someone can help me on this.  I dont know If I'm missing any configuration part here.
    Thanks & Rgds,
    Nilesh

    Any help Experts?
    Nilesh

  • Design Standard CS 5.5 serial number not working for Photoshop

    I am trying to install the Design Standard CS 5.5 but am having trouble with Photoshop.  All of the programs installed and open correctly except for Photoshop.  When I try to launch it, the Adobe Application Manager comes up saying that the serial number is "not valid for this product."  The serial seemed to work during the install and both InDesign and Illustrator launch without any problems.  I have also tryed uninstalling and then reinstalling Photoshop, but I still have the same problem.  I am running Mac OS X 10.6.8.

    Are you definitely installing Design Premium CS5, not a similar sounding Creative Suite? And not CS5.5?

  • Can't find download for Acrobat 9 STD--the Acrobat 9 download is for PRO, and my serial number not valid for PRO.

    I'm switching to a new laptop, and I want to bring my Acrobat 9 STD with me. Deactivated it on the old laptop, went to the download page for Acrobat 9 and downloaded it, got to the part in the installation where I entered my serial number, and the installation wizard said it was invalid. That's when I noticed the download was for Acrobat 9 PRO, not STD. I used the support chat and explained it to the support person, and he gave me a link for the 9 STD download. Unfortunately, it was the same page. I downloaded it again. Still 9 PRO. Anyone else have any ideas where they're hiding the Acrobat 9 STD download?

    Finding the file all depends on how you did the install and if you downloaded the install file. If the install file was downloaded to the TEMP folder, there is a slight chance it may still be there (should be in Windows>TEMP, not sure on MAC). It may have a name similar to the Pro download of AcroPro90_efg.exe. The Pro would be change to Std and I am not sure what the efg stands for. I would search for AcroStd9*.exe. There seems to be a download for AA 9 std available at http://prodesigntools.com/adobe-acrobat-x-10-pro-reader-suite-direct-download-links-ddl.ht ml. I have no idea if that works. I had found one place where a staff member said he is working on getting links up for all the older versions, not just the trials (that are Pro). I simply searched on Google for Acrobat 9 Standard files. I can't find the message by the staff, but there is one in the last week or two as I recall where a staff member was providing links for folks on an individual basis.

  • Serial Number not working for a re-install

    I am still trying on this one... I needed to replace my hard Drive. I have been trying to re-install Keynote on my new hard drive but the Installer window won't recognize the Serial Number. It will allow me to open old Keynotes but not save any edits. Any help is appreciated. Thanks!

    Error "The serial number is not valid for this product" | Creative Suite

  • Serial number not working for cs3

    I bought an imac from apple in 2008 and I also purchased CS3 Design Premium. I have all the original cd's and it will not accept the serial number to install or re install.
    HELP

    Error "The serial number is not valid for this product" | Creative Suite

  • Cs5 serial number not allowed for cs6 upgrade?

    hello
    I am trying to install CS6 Design Premium (via CD) and have CS5. However I am denied installation because my CS5 serial number is not allowed (it appears I must have CS5.5).  All phone lines are engaged. As well as frustrating, this would seem a very poor 'stealth' trick. I have countless registered Adobe copies going back years and saw no warning re this possibility prior to purchase. Is installing from CS5 impossible?

    phew! I took your advice and after many dropped phone connections, I was able to speak to Prashant (Adobe service rep in India) who was able to take create a (temporary) support number for me to type in to the registration dialogue via the challenge code procedure. This appeared to bypass the registration dropdown issue and so allowed me to register... at last!
    In retrospect I am very grateful for your help and my good fortune in being able to speak to Prashant who was able to fix the problem over the phone. However I suspect this problem may occur to others and the solution seems far from easy when long phone queues and dropped connections add to the tortuous minefield of what is simply meant to be a registration process!
    best regards in all events
    Simon

  • URGENT!!!! get the same message "serial number not valid for this product" and I am RE installing on the same computer that crashed last week...

    I am attempting to RE install PSElements 11 on a computer where it WAS last week but had a hard drive crash. The message is wrong and the serial number is correct. URGENT as I am at the apple store trying to get help from apple people, and they DON'T want me to install a new version of Yosemite as it will make computer slower...

    Error "The serial number is not valid for this product" | Creative Suite
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  • Serial number not valid for LR5

    hello all I am Brazilian and my computer is in Portuguese  bought the LR 5 here in japan and downloaded the LR in the adobe site  try turning the key to activate a message appears saying that the number is invalid which will

    1. Make sure you have ADMIN privileges.
    2. Manually enter the serial number. Many people have an same issue (cut and paste) and there ends up being a leading or trailing space.
    3. Use zeros (no "o"s). Use ones (no "i"s)
    4. Make sure the serial number is for the version you actually installed, not an older version.

  • Serial number not valid for diadem 9.1 but valid for 9.0

    Our serial number is suppose to be valid. We have paid. I was told I could download the software, which I have done. I installed and it says that this serial number is not valid for this version of diadem, which by the way is 9.1. However, I can install 9.0 and the number works fine. I want 9.1 though, not 9.0. Running this on Windows XP pro.

    Hi Walter,
    Yes, I knew this. I have been working with Linda from NI and am still awaiting a response. We have purchased this. We have had the same serial number for the longest time, as a matter a fact, its the only serial number. We were suppose to get this version and I was suppose to be able to use my serial number with this. While I have been waiting, I was hoping that maybe someone else had run into this problem and new of a resolution. I appreciate you taking the time to respond.
    Thanks,
    Bob O

  • Serial Number not recognized for upgrade

    I entered the Serial Number on the back of the box for Adobd PHhotoshop CS3, but received an error message which said it was invalid and to contact customer support. Does Customer Support monitor this Forum? How do I contact them?

    that’s where I was already - how do I contact a real person I can talk to on the phone or live chat online?
    Jane Künstler
    [email protected]
    Künstler Enterprises, Ltd.
    P.O. Box 311
    Oyster Bay, NY 11771
    mkunstler.com
    516.624.2830
    Confidentiality Notice:  The information contained in this e-mail and any attachments may be legally privileged and confidential.  If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited.  If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately.  You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person.   Thank you.

  • Serial Number not recognized for Snow Leopard Up to Date

    Not sure where to post this question as it pertains to Snow Leopard....
    Just bought a new imac but its Serial Number is not being recognized on the Snow Leopard Up to Date page. The serial number is recognized elsewhere, such as the warranty check page.
    Suggestions? Thanks

    That's a shame. But I suspect it's temporary. I think you get 90 days from the date of purchase to get the free upgrade. I assume that Apple will be better able to deal with this issue as we get closer to the release date.
    Meanwhile, we are not Apple employee's and can not speak for the company or guess what the problem is. Apple does have a direct Feedback site that they do read and respond to:
    http://www.apple.com/feedback/
    For those that may have missed it or haven't tried yet, here's the sign-up page where you are supposed to be able to register online. You can also download the form and send it in the mail.
    http://www.apple.com/macosx/uptodate/

  • Why is the serial number not working for my premiere elements 12?

    Can anyone help me with why my serial number is invalid

    You might want to contact Adobe directly (this is a user to user help forum, not Adobe support)
    Select a reason, then click I STILL NEED HELP to activate Premiere Elements chat
    -http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues

Maybe you are looking for