Serial number problem upgrading from Tryout and 5.1 to 5.5 CS Standard

Hi
Long one...!
I bought a new iMac and CS5.5 Design Standard. Installed it. Didn't have my education serial at the time so ran as trial. All good.
Received serial from Adobe. Put it in and Indesign was OK with it and upgraded to 5.5, but others stayed as Tryouts. Reinstalled, same problem.
Contacted Adobe who said the serial was for Windows. After much messing around they issued another serial. Put it in. It changed when I put the disk in to try and reload. (Last four digit box changes itself to XXX). Other two packages went from Tryout to 5.1.
Uninstalled whole package and reinstalled using the code Adobe Support gave me. Indesign back as 5.5 but other two still only 5.1
Why might this be?
You don't have to read the following but it may help.
Thank you for answers or suggestions. At wits' end here!
Sam
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 2 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with Arun Kumar.
sam: Hello
Arun Kumar: Hello! Welcome to Adobe Customer Service.
Arun Kumar: Hi! Sam.
sam: My copy of CS design standard says my serial number isn't correct
Arun Kumar: May I please have your email address registered with Adobe while I review your request?
sam: .......................
Arun Kumar: Thank you for the information.
Arun Kumar: I understand that you need assistance regarding serial number. Is that correct?
sam: You emailed me the serial after I sent in supporting evidence of eligibility and i pasted it into the startup. The startup seems to have gone but the prgarm still says trial version
Arun Kumar: Okay, sure I will help you with this.
Arun Kumar: May I have the serial number?
sam: "Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- .....................
sam: I pasted it into the box
Arun Kumar: Okay.
Arun Kumar: I checked with the serial number and it's correct.
Arun Kumar: Are you using the correct dvd?
sam: The suite installed and the nag screen's gone but the product still says it's a trial version
sam: I used the dvd provided
Arun Kumar: May I know which software trail version is installed on your machine?
Arun Kumar: Are we still connected?
sam: Sorry
sam: Creative Suite Design Standard 5.5
sam: Ai and PS say it's a tryout on the startup screen
Arun Kumar: In this case, I suggest you to uninstall the trail version and install the Design Standard CS 5.5 with the help of DVD.
sam: The dvd was where I installed what I have from
sam: I deleted and reinstalled PS as I thought there was another problem with it
Arun Kumar: May I know which software was there before you installing the software form DVD?
sam: Brand new iMac
Arun Kumar: Sam, you install it in trial version, there you will get option of help, click on help and register the serial number.
Arun Kumar: Your product will get converted to full version.
sam: I'm new to Macs. How do I uninstall it?
Arun Kumar: Don't uninstall it.
sam: OK. Can you give me a refernce for this case for itf it doesn't work?
Arun Kumar: With the help of DVD run the software and choose  the trial version.
sam: Choose the trial version???
Arun Kumar: You will get two options when you will install it with DVD one is run the trail version and another is enter the serial number.
Arun Kumar: Did you got this two option when you installed the software?
sam: I was going to do it later! Shall I do it now?
sam: If you don't mind waiting...
Arun Kumar: Installation will take time and we can't wait for so much time.
Arun Kumar: I will provide you all the steps.
sam: OK
Arun Kumar: If you still get any problem, you can contact us back. We are available 24/7
Arun Kumar: When you will install the software, you will get two option.
Arun Kumar: 1) install on trail version.
Arun Kumar: 2) enter the serial number.
Arun Kumar: By both way you can activate the product.
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 3 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with 'Pritam'
Pritam: Hello. Welcome to Adobe Technical Support.
Pritam: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Pritam: Could you please provide your email address?
sam: [email protected]
Pritam: Hello SAm
Pritam: *Sam
Pritam: AS I understand you are having an issue with the activation of the product,am I correct?
sam: Hi Pritam
sam: I've had two long discussions with your chatroom people. Very willing but still no success activating two of the products. The ID product has changed to 5.5 but AI and PS don't accept the serial code I was given. Please would someone let me know what to do? The trial is running out and I need the software!
sam: I mean Live Chat
Pritam: Thank you fro confirming the issue.
Pritam: *for
Pritam: I will try my level best to help you out with the issue.
Pritam: May I have the serial number of the product?
sam: 1408-1108-9876-3887-8290-4164
Pritam: Sam ,may I know are you trying to activate the product in Windows or MAC?
sam: A new iMac
sam: You're welcome to remote view the machine if it helps
Pritam: Sam, this is why you are having an error in activating.
Pritam: The serial number which you have provided is for Windows and you are trying to activate the product in MAC ,because of this you are not able to activate the product.
sam: It's the one you sent me this morning
sam: I sent in my education user support case stuff yesterday and included tproduct code from the packaging
sam: Can you give me a Mac serial?
Pritam: Please allow me a moment.
Pritam: Thank you fro staying online.
sam: No problem
Pritam: As we are from the technical team ,we don't have the resource for the changing serial number to MAC.
Pritam: In this case I will transfer the chat to our customer service team,they will help you out with the issue.
Pritam: May I transfer the chat?
sam: Thanks... this is from the email today: Your Adobe ID:............ Your Case Number:............ With this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- ........................
Please wait while I transfer the chat to the appropriate group.
You are now chatting with Daniel Pedapenki.
Daniel Pedapenki: Hello! Welcome to Adobe Customer Service.
Daniel Pedapenki: Hi Sam.
Daniel Pedapenki: May I please have your email address registered with Adobe while I review your request?
sam: Hi Daniel
sam: ...............
Daniel Pedapenki: Thank you for the email address.\
sam: Email to me today:
sam: sam: Thanks... this is from the email today: Your Adobe ID:............... Your Case Number:................... With this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- .....................
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Please elaborate the issue which you are facing now.
sam: The activation screens won't accept the number as the product
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Sam, I see that the serial number is for the product Design Standard CS 5.5 Win platform and it is not activated till now, may I know the exact error message please?
sam: AI and PS startup screens say they're CS5 tryout
sam: The Indesign package seems happy with the code and says it's 5.5. Off the same CD
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Okay Sam.
sam: Hi
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
sam: Thanks for your help
Daniel Pedapenki: Sam, on the installation window, is it mentioned as Design Standard CS5.5 and Design Premium CS5.5?
sam: Just looking now
Daniel Pedapenki: Alright!
Daniel Pedapenki: Just to confirm, are you trying to install the program on Mac  machine?
sam: Yes. The programs work as trials fine
Daniel Pedapenki: Thank you for the information.|
Daniel Pedapenki: Sam, since you are using the Windows version serial number, to install the program on Mac machine, you are getting this issue.
sam: One of the three packages seems OK
sam: I'm opening the installer now
Daniel Pedapenki: Sorry for the wait. Please do stay online.
sam: It just goes through to the Enter Serial Number... Provide a serial number...Install this product as a trial... etc
Daniel Pedapenki: Sam, please confirm, me if you have installed the product in Win or Mac?
sam: THE SERIAL NUMBER IS NOT VALID FOR THIS PRODUCT... INSTALL THIS PRODUCT AS A TRIAL
sam: Mac
Daniel Pedapenki: Sam, as the serial number of the product is for Win platform, you can use the product in Mac platform.
sam: Do you mean 'cannot'?
Daniel Pedapenki: *cannot
Daniel Pedapenki: Yes, you are correct.
sam: The three programs are running fine but two as tryout only. I only have this one disk to load from, supplies by Apple with the new machine
sam: The box says 'For sale only with a new Mac'
Daniel Pedapenki: Sam, you have to install the product in Win platform as the serial number issued for you is for Win.
sam: Not going to do that. Please give me a working serial number
sam: I haven't got a disk for Windows installation anyway
Daniel Pedapenki: I'll be right with you.
sam: Thanks
sam: I have only a couple of weeks to register this! And I need it for my coursework!
Daniel Pedapenki: You are welcome.
Daniel Pedapenki: Sam, the coupon code and the part number which you have provided to use for the edu serial number is for Win platform, in this case, we have provided you the serial number for the Win platform.
Daniel Pedapenki: You can check in your mails for this information,.
sam: Can you confirm back to me the product code?
sam: I can photograph the box and email you showing the stickers etc
sam: The part number on the back of the package is 91047958, yes?
Daniel Pedapenki: Product name: CS5.5 Design Standard.
Daniel Pedapenki: Part number (PN): 91047958
Daniel Pedapenki: Coupon code: dsgnm3-1........
Daniel Pedapenki: Design Standard CS 5.5---  ................
sam: There's also a sticker saying PN: 65147483
sam: Lot code 12056
sam: I don't know where in my emails I said it was for Windows?
sam: Also, why has Indesign activated properly?
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Sam, the serial number is for the Win platform, in this case, you can use this serial number in the Win platform.
sam: I did not buy the software to use in Windows. I am moving completely to Apple
sam: As I asked above:
sam: sam: I don't know where in my emails I said it was for Windows? sam: Also, why has Indesign activated properly?
sam: Why did the Education activation people give me the wrong number?
sam: Two possible solutions now are that you give me the correct serial number, or send me another disk which will activate properly on OS X
Daniel Pedapenki: I'll be right with you.
sam: I'm feeling like I have done something wrong here... and it's not a good feeling
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
Daniel Pedapenki: Sam, in this case, I'll provide you the new serial number for Mac version.
sam: OK
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 3 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with 'Pritam'
Pritam: Hello. Welcome to Adobe Technical Support.
Pritam: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Pritam: Could you please provide your email address?
sam: [email protected]
Pritam: Hello SAm
Pritam: *Sam
Pritam: AS I understand you are having an issue with the activation of the product,am I correct?
sam: Hi Pritam
sam: I've had two long discussions with your chatroom people. Very willing but still no success activating two of the products. The ID product has changed to 5.5 but AI and PS don't accept the serial code I was given. Please would someone let me know what to do? The trial is running out and I need the software!
sam: I mean Live Chat
Pritam: Thank you fro confirming the issue.
Pritam: *for
Pritam: I will try my level best to help you out with the issue.
Pritam: May I have the serial number of the product?
sam: 1408-1108-9876-3887-8290-4164
Pritam: Sam ,may I know are you trying to activate the product in Windows or MAC?
sam: A new iMac
sam: You're welcome to remote view the machine if it helps
Pritam: Sam, this is why you are having an error in activating.
Pritam: The serial number which you have provided is for Windows and you are trying to activate the product in MAC ,because of this you are not able to activate the product.
sam: It's the one you sent me this morning
sam: I sent in my education user support case stuff yesterday and included tproduct code from the packaging
sam: Can you give me a Mac serial?
Pritam: Please allow me a moment.
Pritam: Thank you fro staying online.
sam: No problem
Pritam: As we are from the technical team ,we don't have the resource for the changing serial number to MAC.
Pritam: In this case I will transfer the chat to our customer service team,they will help you out with the issue.
Pritam: May I transfer the chat?
sam: Thanks... this is from the email today: Your Adobe ID:............... this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- 1.............
You are now chatting with Daniel Pedapenki.
Daniel Pedapenki: Hello! Welcome to Adobe Customer Service.
Daniel Pedapenki: Hi Sam.
Daniel Pedapenki: May I please have your email address registered with Adobe while I review your request?
sam: Hi Daniel
sam: .................
Daniel Pedapenki: Thank you for the email address.\
sam: Email to me today:
sam: sam: Thanks... this is from the email today: Your Adobe .............0 With this response, we believe your issue is resolved and have therefore closed your case .. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- ...............4164
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Please elaborate the issue which you are facing now.
sam: The activation screens won't accept the number as the product
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Sam, I see that the serial number is for the product Design Standard CS 5.5 Win platform and it is not activated till now, may I know the exact error message please?
sam: AI and PS startup screens say they're CS5 tryout
sam: The Indesign package seems happy with the code and says it's 5.5. Off the same CD
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Okay Sam.
sam: Hi
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
sam: Thanks for your help
Daniel Pedapenki: Sam, on the installation window, is it mentioned as Design Standard CS5.5 and Design Premium CS5.5?
sam: Just looking now
Daniel Pedapenki: Alright!
Daniel Pedapenki: Just to confirm, are you trying to install the program on Mac  machine?
sam: Yes. The programs work as trials fine
Daniel Pedapenki: Thank you for the information.|
Daniel Pedapenki: Sam, since you are using the Windows version serial number, to install the program on Mac machine, you are getting this issue.
sam: One of the three packages seems OK
sam: I'm opening the installer now
Daniel Pedapenki: Sorry for the wait. Please do stay online.
sam: It just goes through to the Enter Serial Number... Provide a serial number...Install this product as a trial... etc
Daniel Pedapenki: Sam, please confirm, me if you have installed the product in Win or Mac?
sam: THE SERIAL NUMBER IS NOT VALID FOR THIS PRODUCT... INSTALL THIS PRODUCT AS A TRIAL
sam: Mac
Daniel Pedapenki: Sam, as the serial number of the product is for Win platform, you can use the product in Mac platform.
sam: Do you mean 'cannot'?
Daniel Pedapenki: *cannot
Daniel Pedapenki: Yes, you are correct.
sam: The three programs are running fine but two as tryout only. I only have this one disk to load from, supplies by Apple with the new machine
sam: The box says 'For sale only with a new Mac'
Daniel Pedapenki: Sam, you have to install the product in Win platform as the serial number issued for you is for Win.
sam: Not going to do that. Please give me a working serial number
sam: I haven't got a disk for Windows installation anyway
Daniel Pedapenki: I'll be right with you.
sam: Thanks
sam: I have only a couple of weeks to register this! And I need it for my coursework!
Daniel Pedapenki: You are welcome.
Daniel Pedapenki: Sam, the coupon code and the part number which you have provided to use for the edu serial number is for Win platform, in this case, we have provided you the serial number for the Win platform.
Daniel Pedapenki: You can check in your mails for this information,.
sam: Can you confirm back to me the product code?
sam: I can photograph the box and email you showing the stickers etc
sam: The part number on the back of the package is 91047958, yes?
Daniel Pedapenki: Product name: CS5.5 Design Standard.
Daniel Pedapenki: Part number (PN): 91047958
Daniel Pedapenki: Coupon code: dsgnm3-1.........
Daniel Pedapenki: Design Standard CS 5.5---   ...........
sam: There's also a sticker saying PN: 65147483
sam: Lot code 12056
sam: I don't know where in my emails I said it was for Windows?
sam: Also, why has Indesign activated properly?
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Sam, the serial number is for the Win platform, in this case, you can use this serial number in the Win platform.
sam: I did not buy the software to use in Windows. I am moving completely to Apple
sam: As I asked above:
sam: sam: I don't know where in my emails I said it was for Windows? sam: Also, why has Indesign activated properly?
sam: Why did the Education activation people give me the wrong number?
sam: Two possible solutions now are that you give me the correct serial number, or send me another disk which will activate properly on OS X
Daniel Pedapenki: I'll be right with you.
sam: I'm feeling like I have done something wrong here... and it's not a good feeling
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
Daniel Pedapenki: Sam, in this case, I'll provide you the new serial number for Mac version.
sam: OK
Daniel Pedapenki: Sam, please be online for 2 minutes.
sam: OK
Daniel Pedapenki: Thank you.
Daniel Pedapenki: Sam, the new serial number is .........6201.
Daniel Pedapenki: Is there anything else I can help you with?
sam: Can I just try that serial
Daniel Pedapenki: I'm sure you can activate the product with out any issue.
Daniel Pedapenki: Please feel free to contact us if you need more assistance.
Daniel Pedapenki: Do you have any further questions for me today?
sam: No thanks
Daniel Pedapenki: Thank you for contacting Adobe.  We are available 7 days a week, 24 hours a day. Goodbye!
Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
You are not currently connected to a chat representative.
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 3 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with 'Pritam'
Pritam: Hello. Welcome to Adobe Technical Support.
Pritam: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Pritam: Could you please provide your email address?
.......Pritam: Hello SAm
Pritam: *Sam
Pritam: AS I understand you are having an issue with the activation of the product,am I correct?
sam: Hi Pritam
sam: I've had two long discussions with your chatroom people. Very willing but still no success activating two of the products. The ID product has changed to 5.5 but AI and PS don't accept the serial code I was given. Please would someone let me know what to do? The trial is running out and I need the software!
sam: I mean Live Chat
Pritam: Thank you fro confirming the issue.
Pritam: *for
Pritam: I will try my level best to help you out with the issue.
Pritam: May I have the serial number of the product?
sam: .-4164
Pritam: Sam ,may I know are you trying to activate the product in Windows or MAC?
sam: A new iMac
sam: You're welcome to remote view the machine if it helps
Pritam: Sam, this is why you are having an error in activating.
Pritam: The serial number which you have provided is for Windows and you are trying to activate the product in MAC ,because of this you are not able to activate the product.
sam: It's the one you sent me this morning
sam: I sent in my education user support case stuff yesterday and included tproduct code from the packaging
sam: Can you give me a Mac serial?
Pritam: Please allow me a moment.
Pritam: Thank you fro staying online.
sam: No problem
Pritam: As we are from the technical team ,we don't have the resource for the changing serial number to MAC.
Pritam: In this case I will transfer the chat to our customer service team,they will help you out with the issue.
Pritam: May I transfer the chat?
sam: Thanks... this is from the email today: Your Adobe ID:. Your Case Number:0207655150 With this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- 1.-4164
Please wait while I transfer the chat to the appropriate group.
You are now chatting with Daniel Pedapenki.
Daniel Pedapenki: Hello! Welcome to Adobe Customer Service.
Daniel Pedapenki: Hi Sam.
Daniel Pedapenki: May I please have your email address registered with Adobe while I review your request?
sam: Hi Daniel
sam: [email protected]
Daniel Pedapenki: Thank you for the email address.\
sam: Email to me today:
sam: sam: Thanks... this is from the email today: Your Adobe ID:..........Your Case Number:......... With this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- .-4164
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Please elaborate the issue which you are facing now.
sam: The activation screens won't accept the number as the product
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Sam, I see that the serial number is for the product Design Standard CS 5.5 Win platform and it is not activated till now, may I know the exact error message please?
sam: AI and PS startup screens say they're CS5 tryout
sam: The Indesign package seems happy with the code and says it's 5.5. Off the same CD
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Okay Sam.
sam: Hi
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
sam: Thanks for your help
Daniel Pedapenki: Sam, on the installation window, is it mentioned as Design Standard CS5.5 and Design Premium CS5.5?
sam: Just looking now
Daniel Pedapenki: Alright!
Daniel Pedapenki: Just to confirm, are you trying to install the program on Mac  machine?
sam: Yes. The programs work as trials fine
Daniel Pedapenki: Thank you for the information.|
Daniel Pedapenki: Sam, since you are using the Windows version serial number, to install the program on Mac machine, you are getting this issue.
sam: One of the three packages seems OK
sam: I'm opening the installer now
Daniel Pedapenki: Sorry for the wait. Please do stay online.
sam: It just goes through to the Enter Serial Number... Provide a serial number...Install this product as a trial... etc
Daniel Pedapenki: Sam, please confirm, me if you have installed the product in Win or Mac?
sam: THE SERIAL NUMBER IS NOT VALID FOR THIS PRODUCT... INSTALL THIS PRODUCT AS A TRIAL
sam: Mac
Daniel Pedapenki: Sam, as the serial number of the product is for Win platform, you can use the product in Mac platform.
sam: Do you mean 'cannot'?
Daniel Pedapenki: *cannot
Daniel Pedapenki: Yes, you are correct.
sam: The three programs are running fine but two as tryout only. I only have this one disk to load from, supplies by Apple with the new machine
sam: The box says 'For sale only with a new Mac'
Daniel Pedapenki: Sam, you have to install the product in Win platform as the serial number issued for you is for Win.
sam: Not going to do that. Please give me a working serial number
sam: I haven't got a disk for Windows installation anyway
Daniel Pedapenki: I'll be right with you.
sam: Thanks
sam: I have only a couple of weeks to register this! And I need it for my coursework!
Daniel Pedapenki: You are welcome.
Daniel Pedapenki: Sam, the coupon code and the part number which you have provided to use for the edu serial number is for Win platform, in this case, we have provided you the serial number for the Win platform.
Daniel Pedapenki: You can check in your mails for this information,.
sam: Can you confirm back to me the product code?
sam: I can photograph the box and email you showing the stickers etc
sam: The part number on the back of the package is 91047958, yes?
Daniel Pedapenki: Product name: CS5.5 Design Standard.
Daniel Pedapenki: Part number (PN): 91047958
Daniel Pedapenki: Coupon code: dsgnm3-1630-0679-7505-5758
Daniel Pedapenki: Design Standard CS 5.5---   1.4164
sam: There's also a sticker saying PN: 65147483
sam: Lot code 12056
sam: I don't know where in my emails I said it was for Windows?
sam: Also, why has Indesign activated properly?
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Sam, the serial number is for the Win platform, in this case, you can use this serial number in the Win platform.
sam: I did not buy the software to use in Windows. I am moving completely to Apple
sam: As I asked above:
sam: sam: I don't know where in my emails I said it was for Windows? sam: Also, why has Indesign activated properly?
sam: Why did the Education activation people give me the wrong number?
sam: Two possible solutions now are that you give me the correct serial number, or send me another disk which will activate properly on OS X
Daniel Pedapenki: I'll be right with you.
sam: I'm feeling like I have done something wrong here... and it's not a good feeling
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
Daniel Pedapenki: Sam, in this case, I'll provide you the new serial number for Mac version.
sam: OK
Daniel Pedapenki: Sam, please be online for 2 minutes.
sam: OK
Daniel Pedapenki: Thank you.
Daniel Pedapenki: Sam, the new serial number is 1......-6201.
Daniel Pedapenki: Is there anything else I can help you with?
sam: Can I just try that serial
Daniel Pedapenki: I'm sure you can activate the product with out any issue.
Daniel Pedapenki: Please feel free to contact us if you need more assistance.
Daniel Pedapenki: Do you have any further questions for me today?
sam: No thanks
Daniel Pedapenki: Thank you for contacting Adobe.  We are available 7 days a week, 24 hours a day. Goodbye!
Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
You are not currently connected to a chat representative.
When I inserted the disk it came up with the serial loaded as ...............7313-xxx
Deleted all and reinstalled, IT! changed my code as above to ...............6201 and all seemed promising….... etc.!

Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
Bob

Similar Messages

  • Apply a DVD-ROM serial number to upgrade from free trial version of Lightroom 5?

    I got Lightroom 5 on a DVD-ROM disc as a gift for Christmas. I want to use it on my MacBook, but it doesn't have a disc drive.  I downloaded the free trial of Lightroom to my MacBook. Is there anyway I can apply the disc's serial number to my free trial download? Other ways to download Lightroom 5 and use the DVD's serial number?

    When you start the trial version, a screen displays indicating how many days you have remaining in your trial. On that screen is an option to indicate that you have a serial number. Choose that option, and you will be provided with another screen where you can enter the serial number.
    Take note that if you downloaded and installed the creative cloud version you will have a different procedure. It will be necessary for you to remove that version and install the trial version from the following website:
    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1

  • Invalid Serial number during upgrade from 10.4.11 to 10.5

    I upgraded our Xserve from 10.4.11 to 10.5 and when it first boots after the install, I get to the enter serial number screen. At this point the 10.5 serial number I enter goes through validating and then says invalid serial number format. I have several serial numbers I have tried so I know that a wrong serial is not the cause. I have tried connecting from another computer with server admin and changing the serial number that way, which when, I do shows the 10.4 serial number but then says invalid serial when entering the 10.5 serial. It seems like it is confused on what the serial number or format should be. Is there a way to manually install a serial number or at least get past it so I can then install the most recent update and hope that fixes this issue? I see there were some similar issues with the 10.5.8 update but I think the install dvd is only 10.5 or 10.5.1 maybe.

    Well I finally got past it by ssh'ing into the server while it was at the serial number page and issuing it this command and specifying my serial number
    /System/Library/ServerSetup/serversetup -setServerSerialNumber xsvr-xxx-xxx-x-xxx-xxx-xxx-xxx-xxx-xxx-x
    I then rebooted the server and it came back to the same enter serial number screen but upon entering it one more time, it validated and is happy now.

  • Original serial number when upgrading from Trial version

    Hi,
    I just bought LR 5.5 because my Trial version was over. When trying to put in the serial number, it says "This is an upgrade serial number. The serial number for your previous version of Lightroom is also required." I do not have the original serial number. Am I missing something here?
    I had bought Lightroom 5 stand alone and the email I got says I bought following:
    Adobe Photoshop Lightroom 5
    US$79.00
    Upgrade, Mac/Win, English, Download
    Is it not the right version to buy?
    Thanks.

    I am having the same issue now too - I purchased the "Lightroom 5 Standalone perpetual license - Mobile capabilities not included" today and it won't let me register with the serial number I got in the e-mail confirmation because it advised I needed the original product serial number too.  No where in the purchase process of the Stand Alone did it say anything about this being an upgrade.  This is very deceptive by Adobe. Is the Stand Alone product really just an upgrade?  How do I get this resolved?
    Lightroom 5 standalone
    Perpetual license – mobile capabilities not included.
    Lightroom 5 standalone
    Perpetual license – mobile capabilities not included.

  • I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

    I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

    Contact Adobe support:
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I started using LT 4 and I have a serial number, also upgraded to LT 5 and have a serial number. Now I just bought a new Macbook Pro and installed the LT 5, but it doesn't accept my serial number. Why?

    I started using LT 4 and I have a serial number, also upgraded to LT 5 and have a serial number. Now I just bought a new Macbook Pro and installed the LT 5, but it doesn't accept my serial number. Why?

    When you installed the Lightroom 5 on your MacBook, did it ask for both serial numbers. Since you purchased Lightroom 5 as an upgrade, you need both the serial number from your original purchase as well as the new serial number for Lightroom 5. If you have both of those numbers and they are still not being accepted then you will have to contact Adobe customer support for a solution.

  • Serial number problem after upgrade to Mavericks

    My old CS5 Photoshop v. 12.0.4 works fine in an old Mac computer with OSX Snow Leopard, but after transfer to a new Mac with OSX Mavericks whenever I try to open Photoshop it asks for a serial number I no longer have. Bought Photoshop years ago, never registered it because I only had dialup internet in those days (and my rural DSL line still crawls at 1.5 speed), install discs and box are nowhere to be found and I don't want to upgrade to a newer version. Just want to use my old Photoshop like I did before, without Cloud or any other nonsense. Can I I get a new serial number or how do I activate it?

    If you lost your serial number, your proof of purchase and also failed to register your product, there's not a lot we can do for you. Sorry.
    If, however, you lost your serial # but have the product installed and activated using a genuine serial # you can launch Photoshop and select Help>Product Registration... to register the serial # with your Adobe ID. You can then log into your Adobe account on Adobe.com to retrieve your serial #. (Note: It takes about 5-10 minutes for the serial to show up in your My Products of your Adobe account when you register this way)
    http://www.adobe.com/support/registration.html
    Other purchased products: From within your product, choose Help > Product Registration. (You don’t need to have your serial number when you use this option.)

  • Pls help me with  Mac and had a trial  serial number problems

    Hi,
    I downloaded first the trial version of Photoshop, after 30 days finished but the icon still remained.
    Now, when purchased a creative suite 4 Designe premium, installed, all programs are fine, just the photoshop not working, asking for serial number but when I type the right numbers, doesn`t accept.
    What can I do? any idea?
    to uninstall the photoshop and install again?
    but if I have the other programs working and installed?

    Hi,thank you, that is fine, just not so quick but I resolved the problem alone.Thanks anyway you helped me.Eva
    Date: Sat, 1 Aug 2009 11:53:58 -0600
    From: [email protected]
    To: [email protected]
    Subject: Pls help me with  Mac and had a trial  serial number problems
    Hello, Eva. For CS4 problems, you need to ask in the Photoshop forum (this is the Photoshop Elements forum). It's here:
    http://forums.adobe.com/community/photoshop/photoshop_macintosh
    Good luck!
    >

  • I'm having problems upgrading from 10.6.8 to Yosemite.  My computer locks up after the download and installation process.  Does anyone know how I can overcome this problem?

    I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I am installing CS6, for the first time, on a Mac, from a CD.  I have a valid serial number that I just obtained.  When I enter the serial number, it is not validated and I cannot continue.

    I am installing CS6, for the first time, on a Mac, from a CD.  I have a valid serial number that I just obtained.  When I enter the serial number, it is not validated and I cannot continue.

    Error "The serial number is not valid for this product" | Creative Suite

  • Aperture 2 install - serial number problem

    Disclaimer: I'm pretty good on a pc. Absolutely terrible on Mac, never had so many problems with tech :/
    So...I have my serial number from the back of the Aperture 2 "Installing your software" booklet. Checked that I'm entering "I's" not "1's." Got dashed between the sequences. Capslock on etc. Searched forum, quite a few posts on serial number problems. None matched.
    Enter serial number. Second window pops up stating I've entered an upgrade serial number (I only have the expired trial version of Aperture installed), and requesting my "serial number."
    I'm lost now. Checked my original docs, there's nothing on Aperture trial version. Fired up the trial and I see what looks like a license key (to Apple, not me) on the launch screen. That's not accepted by Aperture 2.
    Any thoughts on this appreciated.

    M_Austin wrote:
    Thanks, think you solved this Wish the label said something like that, the box only says Aperture 2, not upgrade license. So I'm guessing I have to pay $199, and keep this $99 package to upgrade it? I hope not. I'll ask at the store.
    There is a tiny label on the bottom edge of the box. Mine says "Aperture 2.0 Retail". The tiny label on my box for Final Cut Express 4 says "Final Cut Express 4.0 UPG". Does yours not say "UPG" on that little label? If not, you should be able to return it for the full version (plus pay the difference, of course). If it does say "UPG" you might be out of luck as most open software can't be returned.

  • Will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?

    will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?

    Impossible to know. But I would make a backup before doing so, just in case. I would also do the following:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If you wish to save yourself a lot time should you need to reinstall Mavericks at some point in the future then see the following:
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time. When completed it would be wise to test the installer by checking that it boots the computer and is then ready for installation.

  • Invalid Serial Number Problem

    I am attempting to correct invalid license problem and program is indicating invalid serial number when it is correct.  I am Abode Acroban 7.0 Standard License

    you should use acrobat 7 standard program and serial number from here:  http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI

    Hello All,
    We are unable to make PGI for Sales Order 2066904/10 because of wrong Serial Number Status.
    Delivery note was created on the 22.12.2012 and then due to errors deleted on 27.12.2012.
    Problem is that now we need to do PGI but Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI with Serial Number Status ESTO.
    These 8 products are in Stock and available for this Sales Order, one of the Serial Numbers is with OK Status
    8115001012
    8115001057
    8115001058
    8115001079
    8115001081 with OK status
    8115001180
    8115001181
    8115001690
    Please let us know how to correct the problem so we could do PGI for this Order?
    This scenario is not replicable in RST(Quality System)
    Our Findings:
    ** 1. We have tried IQ02>Edit>Special Serial No Functions>Manual Transactions>To Stock, But it still do not remove EDEL.
    2. Is it suggestible to use T Code BS22 and thereby change PMS8 to Warning? I am not sure regarding this since this a SAP managed Table
    Your help is highly obliged......This is very urgent..........
    Regards,
    Anirban
    SD Consultant

    Hi,
    I have encountered same issue today and here is the solution:
    1. Manually changed the status from EDEL/ESTO to ECUS
        Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Customer", then save.
    2. Once status is in ECUS, change the serial number status back to ESTO.
        Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Stock", then save.
    After doing the 2 steps above, you should be able to do PGI using the serial number.
    Kindly advise if it works for you.
    Regards,
    Vhanie

  • Wanting to deactivate PS Elements on Mac and transfer program to a friend. Is it OK to download a trial to my friend's Mac and use my serial number.  Also is the serial number the same for Mac and Win versions?  Many thanks.

    Wanting to deactivate PS Elements on Mac and transfer program to a friend. Is it OK to download a trial to my friend's Mac and use my serial number.  Also is the serial number the same for Mac and Win versions?  Many thanks.

    Yes it should work transferring PSE10 from Mac to Mac. There is a download link below for PSE10, which your friend could use. There is a formal licence transfer process but it’s not necessary for your friend to register the product (activation is sufficient) although he couldn’t benefit from future upgrade pricing without registration. Serial numbers typically can only be registered one time.
    Boxed versions of PSE are normally multi-platform with disks for both Windows and Mac; so the serial number is the same. Downloads have tended to be single platform only although I believe the current version PSE12 will work on both Windows and Mac with the same serial number – boxed or download.
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

Maybe you are looking for

  • Help with creating a Quiz

    Hey i need help with creating a quiz with scoring and all. I need a helping hand so if you can get me started that would help a lot. Use the Question class to define a Quiz class. A quiz can be composed of up to 25 questions. Define the add method of

  • Can someone please help me? How to add notes!

    How can I add notes onto my ipod? I really want to know how to do it as it would reallty help! Thanx

  • Droid 3 Hide unwanted app icons

    Is there a way to hide the bloatware app icons on my All Apps screen for the DROID 3?  I press and hold the icon and get a choice between "add to home" or "add to group."  I understand that I cannot remove the app, I just want to hide the icon.

  • Can we call the window in runtime in SAP Scripts  ?

    Hi Can we call the window (without placing the window in the layout at design time) in runtime in SAP Scripts  Thank You

  • Lightroom 4 adjustment brush has little effect

    I am using Lightroom 4 because my Mac is on OSX 10.6.8. As I use it today I'm seeing that the adjustment brush is having little effect. I'm trying to bring areas in shadow up a bit, but there's almost no change. The images shows what should be creati