Serial Number tab not appearing in IE01

Dear Experts ,
I have a material managed in serial numbers .
This material is to be linked with the equipment .
During cutover loading i will be creating the equipments manually .
I will put the material code in the construction type
But i am not getting the serial number tab .
How can i activate the serial number tab for the material in equipment master ?
Regards
anis

Hi,
Check the path spro>pm>Master data in PM ->Equpt->Eqpt categories --->Define Additional business views -->here check if SD tick is marked for ur eqpt cateogry ..
regards
pushpa

Similar Messages

IW8W - Serial number list not appearing

Hi,
We are using refurbishment scenario with serialised material.
In iw8w the system asks me to enter the serial number but there is no option for entering it.
Then we tried the following,
While creating the refurbishment order, we entered the serial number by clicking on button "Object" and also noted down the reservation number.
Then when we do MB11, we enter the order number and the reservation number. But the system does not show any serial number. (If we manually enter the serial number which we entered in refurbishment order, the system just gives a warning message saying the stock data is not suitable for movement) Then in IW8W, i can see the serial number list.
My question is, why the system is not showing me the serial number in MB11?
is any config setting missing.
I am using the material with valuation type C3 (Bad) and status as ESTO(in w/h).
Please suggest.

Dear Vijay,
To make appear your list of serial no while doing goods recipt at IW8W
There is a small configuration in the Plant Maintenance i.e. Functions and setting for order type-> Goods Movement for Order Type.
Now Pleae check the check boxes for planned goods issue, Un planned goods issue, goods receipt for refurbishment . then it will work.

Serial number does not appear in report file name

HI,
I'm using TS4.1. I'm getting a report with the serial number. However, the filename of the report does not include that serial number.
example:
UDT_Report[NO_UUT_SERIAL_NUM3][2 35 46 PM][9 15 2009] (see attached file)
Any idea what happend or where to look
thanks
Rafi
Attachments:
UDT_Report[NO_UUT_SERIAL_NUM4][2 40 58 PM][9 15 2009].txt ‏10 KB

Hi Rafi,
How are your report options set up?
Charlie Rodway
Test Design Engineer
Rolls-Royce Controls and Data Services Ltd

Order Number is not appearing in Asset PR

Hi,
At the time of creation of Asset PR, the order number is not appearing. I had already assigned the order number in "origin" tab in Asset Master. Please find below details:
1) Creation of Asset with AS01
2) Creation of Order with KO01
3) Assign the order in Asset Master "Origin" tab. The field is "Investment Measure".
4) Creating a PR with Account Assignment "A". But the time I provide asset number, the Order field is coming as "blank".
I am making Direct Capitalisation through Internal Order with asset under Construction.
Please suggest.
$atya

Hi
please check the settings from the note 684659.
Best Regards,
blaz

Shipping tab not appearing in PO

Dear Sir,
I hv made all the relevend configuration and vendor creation for PO but still shipping tab not appearing in po.
I dont know wht step i hv missed out, please advise what should i do.
Looking forward for your quick response on th same.
Regards
Parul

Hi Parul
Pls check the following settings.
1.     Define receiving plant for sto. (Storage location also for this plant if required).
2.     Assign receiving plant to company code.
3.     Assign receiving plant to the supplying plants sales org, distribution channel.
4.     Assign shipping point of supplying plant to receiving plant.
5.     Maintain purchasing organization and assign it to receiving plant and company code.
6.     Create receiving plant as a customer in supplying plant (normal customer creation).
7.     Define shipping data for plants: imgu2014mm-----po-----setup sto.
                     Select receiving plant and assign customer number (previous step number)
                     Assign the sales area of supplying plant.
                     Select supplying plant assign the sales area of supplying plant
8.     Assign delivery types and checking rules (imgu2014mm-----po-----setup sto)
9.     Assign document types, one-step procedure, under delivery tolerance. (same above path)
10.     Extend the material to the receiving plant.
11.     For Second plant assign manual shipping point as of first plant (OVL2)
Br.
Ramana

My cursor frequently stops working. It still moves but nothing happens when I click with it. Also, when I go for support Apple tells me my serial number does not exist but I am sure I am entering the correct one.

My arrow cursor changes unexpectedly to the "tall I" cursor and then I can't open links.
My two delete buttons only work one letter/number at a time.
When I go for Apple support it says my serial number does not exist? But I know it is correct!

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

"The serial number is not for a qualifying product. Please try another"

I purchased, downloaded, install and am using successfully
ADOBE ACROBAT XI PRO
Version (11.0.07)
Installed 12.02.14
Purchased 12.02.14
Adobe Acrobat XI Pro (Windows, English)
I have tried unsuccessfully to register 6+ times
I receive the message:
The SN is not recognized (error statement= "The serial number is not for a qualifying product. Please try another")
I have a total of about 5 sessions that amounts to about one hour trying to solve a problem, navigating your website, going into endless cycles, and have noticed there is no way to call a phone number to fix a problem.
Is this the new Adobe Paradigm?
It appears to be an administrative problem with Adobe
What is the fix?
Please advise

The message means that you have an upgrade license. You just need to prove you are eligible by entering the serial number of the Acrobat 9 or X license that you have - that is the "qualifying" product. It is not asking you to enter the Acrobat XI license again, you already did that.

My sim serial number is not being recognised. What should I do?

I have just purchased an iPhone 5s and am transferring my number over to a nano sim. However my sim serial number was not recognised after several attempts and now the 4 digit code is not bbeing sent through when I enter my number. Any help would be appreciated!

Not sure what you mean by "reboot".
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

I have purchased Production Premium CS4 Educational Version. Its serial number is not working. Please help...

I have purchased Production Premium CS4 Educational Version. Its serial number is not working. Please help...

If you recently purchased this then it is not likely to be a valid sale/purchase. Adobe does not sell older versions of their products and no one but Adobe provides student/teacher licensing. If you purchased this some time years ago and it is only recently that you find you are not able to reactivate it with the original serial number you can try contacting Adobe Support thru chat and see if they will be willing to work with you to resolve this.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail

I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail address.

It is not clear to me what your issue is with not being able to sign in to your Adobe account to find the serial number. You should still be able to sign in and find your serial number if you registered the software.
If your first PC is a Windows machine you might be able to extract the serial number from it using the Belarc Advisor
http://www.belarc.com/free_download.html

I am trying to download Photoshop CS6 onto my Mac from the Adobe website, but I do not have a serial number. I made an Adobe ID, but the serial number is not under "My Products" nor have I received an email including a serial number. I do not know how els

I am trying to download Photoshop CS6 onto my Mac from the Adobe website, but I do not have a serial number. I made an Adobe ID, but the serial number is not under "My Products" nor have I received an email including a serial number. I do not know how else to find the serial number. Please help!

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

My serial number is not valid anymore, is there a way I can get a new one to activate my product?

I have had Adobe Photoshop Elements 11 for about a year now and my serial number is not working anymore for the same product. I have a new computer and am trying to download the product, however it won't accept my serial number. Is there a way I can recieve a new serial number to activate my product?

See:
My serial number doesn't work :
http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html
If that information doesn't help, you need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Why is that i can not view my warranty status? whenever i tried to put my phone's serial number itunes prompt that my serial number is not a valid one. how can i solve this issue?

why is that i can not view my warranty status? whenever i tried to put my phone's serial number itunes prompt that my serial number is not a valid one. how can i solve this issue?

https://selfsolve.apple.com/agreementWarrantyDynamic.do

I have successfully installed my creative suite to my old computer. I have a new one I would like to put it on. My serial number is not working. Please advise.

I need to install my program to my new computer. My serial number is not working.

Which Creative Suite version exactly?
Is your old computer Mac or Windows?
Is your new computer Mac or Windows?

Serial number is not getting updated in GR

Problem: Serial number in not getting updated GR document (in stock) while going GR for production order.
We are using u201CBAPI_GOODSMVT_CREATEu201D to do production order GR in one development. And we have used serial number profile in which we kept GR as optional. Please fine details of serial number profile as below. We have a restriction that we can not make GR mandatory in serial number profile.
MMSL     Maintain goods receipt and issue doc.     02     02
PPAU     Serial numbers in PP order     02     01
PPRL     PP order release     04     01
PPSF     Serial nos in repetitive manufacturing     03     01
QMSL     Maintain inspection lot     02     01
SDAU     Serial numbers in SD order     01     01
SDCC     Completness check for delivery     02     01
SDCR     Completion check IR delivery     02     01
SDLS     Maintain delivery     02     01
SDRE     Maintain returns delivery     02     02
As we are passing serial number in BAPI while doing GR but still is not getting updated in GR document. When we check stock in MMBE, it is not showing any serial number.
Please suggest solution.
Thank you.

Hi Chetan,
Since your MMSL procedure is optional, you cannot carry assignment of Serial Numbers against goods Movement. Though you are passing serial numbers during GR, but Serial Numbers are linked only upto Production Order Level, not upto the Stock. The only option to display the Serial numbers against Stock can be done using MMSL procedure as 3. We also faced the similer situation, whenever ur doing automatic goods movement with MMSL as 02 [Auto GR], One possible solution, is to create a custom program to complete ur GR like using Call Transaction BDC -MB32, not as standard SAP Auto GR, & need to make MMSL as 3...so that both purpose gets served [ Serial number linking to stock & Automatic GR using custom program]
Please share, if you get any better idea
Krishna Kulkarni

Serial Number tab not appearing in IE01

Similar Messages

Maybe you are looking for