Serial Number Transaction Report export to excel but serial not exported
Hi Experts,
I'm trying to export Serial Number Transaction Report to excel in a client database (SP00 PL47). Basically, the report has two screen, the Serial Number (Top) and Transactions for Serial Number (Bottom). When I try to export it, it only export the Transaction for Serial Number. We Need the serial number to be exported, how do we go about this? I tested same database on SP01 PL07 and exported the Serial Number and Transactions for Serial Number. Why is it working in other database, do we have settings that we need to configure?
Regards,
Sai
Hi Don,
In the serial number transaction report, when you click on the excel tab the Save as window will open just cancel the first window there is onther window opened, just save that window under the other name e.g. 123.
because both the window has same name.
Then check the excel file.
Regards,
Datta Kharat
Similar Messages
-
Serial number transaction report
Hi,
Where do I find Serial number transaction report?
Do any one know t.code or program name?
I am unable to locate following menu path,
Inventory >>> Inventory Report >>> Serial Number Transaction Report
Please some one guide me.
Thanks and Best Regards,
MohanTry using tcode OIYH: Serial Number List
Thanks & Regards
JP -
Serial Number Transaction Report Window isn't opening when adding AR Invoice
Hi,
For One of my Client the Serial Number Transaction Report Window is not opening when adding the AR Invoice.
In the Invoice all the item's that is present in the line level are SERIAL MANAGED and Management Method is ON RELEASE ONLY.
Why is it so?Hi,
Do you receive any error message? Is it possible to add without selecting invoice without selecting serial number?
What is your B1 version and PL?
Thanks & Regards,
Nagarajan -
Batch/Serial Number Transaction Report
when we created A/R Invoice or Return..we can see its Batch/Serial Number transaction report..in which table the barcode is saved?
i need this table because i want to create 'Reverse' transaction for it, so we can reconcile it and make new transaction with 'correct' value..
thx,
erickHello Eric,
BarCode is stored in OITM table, Field Name: CodeBars.
You can join the OIBT, IBT1 (Batches) and OSRI, SRI1 (Serial Numbers) tables into OITM table to get the transaction report.
Outgoing batches and serials are stored in the IBT1 and SRI tables, so it is enought to join them into the OINM view (table)
In 8.8 Views has been created for IBT1 and SRI1 tables.
If the items by Delivery note. In this case the delivery note is the key for the serials/batches transaction report. You may create a short development for displaying them in the invoice.
You may read the following blog to understand the basic queries and use them in practice
/people/janos.nagy/blog/2010/06/18/displaying-serial-numbers-batch-details-on-invoice-part-ii
So basics: (2007 and also 8.8)
Bacthes related to Invoices
SELECT T0.[BatchNum] , T1.[Quantity] , case when T0.[ExpDate] is null then '' else convert(nvarchar,T0.[ExpDate],102) end, T2.CodeBars FROM OIBT T0 INNER JOIN IBT1 T1 ON T0.ItemCode = T1.ItemCode and T0.WhsCode = T1.WhsCode and T0.BatchNUm = T1.BatchNum inner join OITM T2 on T0.ItemCode = T2.ItemCode WHERE
T1.[BaseType] = '13' and
T1.[BaseEntry] = [INVOICE_DOCENTRY]
Serial numbers:
SELECT T0.[IntrSerial], T2.CodeBars FROM OSRI T0 INNER JOIN SRI1 T1 ON T0.ItemCode = T1.ItemCode and T0.SysSerial = T1.SysSerial inner join OITM T2 on T0.ItemCode = T2.ItemCode WHERE T1.[BaseType] = '13' and T1.[BaseEntry] =[YOUR_INVOICE_DOCENTRY]
Regards
János Nagy -
About adding UDFs for serial number transactions
Hi,
For some reasons, I need add some UDFs when receivie product or delivery product which are managed by serial number. In UDFs management, I found there is one object called Serial/Batch number object. I add my UDFs under this object then when I go inside serial number transaction report, I can see the new added UDFs. But my question is when I use DI to add goods receipt to receive serial number into system, I can't see the UserFields property. Below is the code I use:
// Lines + Serial Number
oDoc.Lines.SerialNumbers.ManufacturerSerialNumber = "LANSN0007";
oDoc.Lines.SerialNumbers.UserFields.Fields.Item("U_MyUDF01").Value = "XXXXX";
oDoc.Lines.SerialNumbers.Add();
In above code, there is no way to set the UDFs like usual. There is no property called UserFields under SerialNumber. So how I can set the value in the UDF then? Or I am using wrong way to add value in the UDFs?
Any idea?
Thanks,
LanHi nd.Q,
My version is 8.80.235 with PL:17. But in object of SAPbobsCOM.Documents.Lines.SerialNumbers, I can't find the property UserFields which allow you to set the your UDFs value as usual. In SDK help document, I can't find the UserFields property in SerialNumbers object. In my code I can't use code like this:
oDoc.Lines.SerialNumbers.UserFields.Fields.Item("U_XXX").Value = "XXX";
Any idea?
Thanks,
Lan -
My iPad has been stolen. Someone broke into my house on Tuesday. I have already tried locking it through icloud. I have reported this to the authorities but they cannot do much unless I give them the serial number to the iPad. With the serial number they can put it into a database and send that inormation to pawn shops, so i the theie tries to pawn it, the pawn shop employeee can convscate the iPad and hand it over to the authorites. I need the serial number to report it to the authorities. I dont have the box it came in or the receipt and its not on my itunes on the computer because I didnt use it or music, just pictures. Can someone please help??? btw, some words are misspelled becasue the letter that comes ater the letter E, doesnt work on my keybord.
ThanksSerial Number
http://support.apple.com/kb/HT4061
Sign in to My Support Profile
https://supportprofile.apple.com/ -
Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?
Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
B-rock -
I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...
Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments -
Batch Number Transaction Report
Dear Experts,
Is it possible to modify the form settings of Batches table in Batch Number Transaction Report as I need to add in some user-defined fields into it?
Below is the layout of my Batches table in the report:
Batches
# Item No Item Description Batch WhsCode Qty Status Manufacturing Date
and I would like to add in Width, Length & Height columns in the table.
I can't preset the value of length, width & height of the item in Item Master Data because different batches of same item will have different length, width & height. So I created these fields (Width, Length, Height) in Goods Issue & Goods Receipt and assigned different values there. After that, I need to do some references at Batch Number Transaction Report to find out which batches got the specified measurement of that item.
Thanks in advance.Hi Sachin. I think you have misunderstood what I mentioned before.
I want the report to show like this
Item No. Item Description Batch WhsCode Qty Direction Status T W L
A893S Pine 14 x 125 x 1030mm A123 WH01 100 In Released 14 125 1030
A893S Pine 14 x 125 x 1030mm A123 WH01 -10 Out Released 14 125 1030
A126B Ash 14 x 125 x 1090mm J123 WH01 50 In Released 14 125 1090
In fact, below is the result table that I get
Item No. Item Description Batch WhsCode Qty Direction Status T W L
A893S Pine 14 x 125 x 1030mm A123 WH01 100 In Released 14 125 1030
A126B Ash 14 x 125 x 1090mm J123 WH01 50 In Released 14 125 1090
using this query
SELECT T0.[ItemCode], T0.[ItemName], T0.[BatchNum], T0.[WhsCode], T0.[Quantity],
case when T0.[Direction]=0 then 'In' when T0.[Direction]=1 then 'Out' end Direction,
Case when T1.[Status]=0 then 'Released' end Status, T2.[U_Height], T2.[U_Width], T2.[U_Length]
FROM IBT1 T0
INNER JOIN OIBT T1 ON T0.BatchNum = T1.Batchnum and T0.Itemcode=T1.ItemCode
INNER JOIN IGN1 T2 ON T1.ItemCode = T2.ItemCode and T0.Quantity = T2.Quantity
WHERE T1.[ItemCode] =[%0]
Thanks,
Xavier -
Batch Number Transactions Report - TURN OFF
We are managing our batches in B1 2007A; however, our customers do not care what batches they're receiving, per se.
That being said, we do not want batch reports to be created each time an invoice is readied to be printed, as we simply X each report that appears (batch number transactions report, batch report in document). Can these be turned off if batch management is on?
Thank you!
Russell ClaytonThanks for the clarification request -
When we use the document printing feature, we can skip the generation/printing of batch number transaction reports and such; however, when we're doing one-off invoices (not a large run, which is common with our company), the simpleness of choosing print preview and only seeing the invoice pop up would be ideal, as we do not want to print the batch reports at this time (only track within the system). -
Batch Number Transactions report preliminary page
Hi Everyone,
I am trying to print a delivery document with Batches. The system prints the Batch transaction report along with the packing list which is good.
However, I do not want the first page that says - Batch Number Transactions Report - Selection Criteria page to be printed as it is of no use. Is there a way, we can disable this preliminary page from printing?
Appreciate your input on this.
Thanks,
PayalYou may check these threads:
Re: Supress Printing of Aging "Header"/Summary Page
Suppress Printing of Selection Criteria page
Thanks,
Gordon -
Batch Number Transaction Report Menu ID
Dear Expert,
Can you please tell me what is the Menu ID for the Batch Number Transaction report?
Thanks & Regards,
Tushar NathwaniHi Tushar........
Go to Start> All Programs> SAP Business One> SDK> SDK Help--> Type with Menu ID......
You can find the Menu ID List for all the objects used in SAP.
And the Menu ID for Batch No. Transaction Report is 1747....
Hope you are asking for the same what I told you........
Regards,
Rahul -
I have the right serial number to install arabic onto Ai, but the installer will not accept the serial number
I'm also getting the "invalid serial number", but I'm wanting to upgrade my 5.1 to 5.1.4 to take advantage of HDV 720p/24 support. Is the 5.1.4 update even an option still? I really don't want to be forced to upgrade to FCS2 and shell out $500, just to get this one feature that was included in a patch.
I went to the Registration page and it actually allowed me to register the serial number... (which I'm pretty sure I already had), but it still won't let me in to download any updates. Also, the email confirmation that was supposed to be sent has not arrived 20+ minutes later.
Very strange. I called Apple support and they estimated a wait time of 15 mins... ugh.
Anyone have other suggestions? -
I am trying to load LR on my new macbook pro. It asks for the serial number. I enter the digits, but it says, quote, " This is an upgrade serial number. The serial number from your previous version of Lightroom is also required."
If you still have the old computer and it is a MAC, the Lightroom 5 serial numbers are in a text file.
users/"username"/Library/Application Support/Adobe/Lightroom/Lightroom 5.0 Registration
More info here
Preference and other file locations in Lightroom 5 -
hi i have a serial number for adobe photoshop elements 11, but he does it in with photoshop elements 12?
Download here:
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Maybe you are looking for
-
Every time I try to buy music, the suystem asks me to choose a payment option - which credit card. I have an itunes account with money on it. Why can't I get accesss to it?
-
Customer Account line items are Missing Fbl5N
Hi experts... FI Guys could not able to find customer account open line items in FBL5n after generating Accounting document automatically and we have checked VKOA screen, Assignments are fine but in that accounting document the customer itself is mis
-
Exception in thread "main" java.lang.OutOfMemoryError(please help me )
Hi All here my java class trying to read a txt file(which is having size of 60MB).and putting each line into a Vector class. problem is ,upto certain number of line it is reading properly and putting into vector..after that it is giving error like Ex
-
Need help with ActionScript 2.0 and Player 9. I am trying to update my flash pages with Player 9.0 and discovered an incompatibility with the preloader code. I keep getting this message: **Error** Symbol=preloader, layer=background, frame=1, Line 6:
-
Can't see any devices hooked up to Sata ports #5&6 on K9A2 Plat board
Hi there, I'm new to this forum. My virgin system consists of MSI K9A2 Platinum, Bios 1.4 4 GB Corsair CoolerMaster Silent Pro M600 AMD Phenom II X4 940 Zalman CNPS9700NT Visiontek ATI Radeon 4850 SuperTalent 64GB Sata II SSD Samsung SH-223 DVD-RW, S