Serial Number update in sales order creation

Hi All,
i am replicating sales from from CRM to ECC. here i am getting serial number in vbap table z filed. but i need to pass this filed in line iten Extras-- Techinal Objects-- please tell me in which user exit i need to write a logic
thanks
ram

Hi
In this include :- MV45AFZZ, there is form routine :FORM userexit_move_field_to_vbap. check this routine this will be helpful to you.

Similar Messages

Log changes of Serial number change in sales order

Hello Experts,
The change documents does not log changes to serial number for an item.
So far i found that there is standard change document object for sales order i.e. VERKBELEG
Is there a way to add new table to existing object.
Or how can i achieve this.
Best Regards
Rajat

Hello Adriano
Not fully sure about your requirement.
But you can definitely assign Serial numbers to sales order items by selecting the item and choosing menu path Extras/Technical objects.
Firstly you have to set up the Serial Number Profile ( T Code OIS2) or use the standard delivered ones GG00/GG01. Both have the Serialization Procedure SDAU - Serial numbers in SD order and in case of GG00, the serial numbers are assigned automatically. I am not sure how automatic assignment works but you can test it. Of course, you need to specify the Profile in the material master to use the functionality.
Hope this helps.

Serial number assignment in sales order

Good afternoon,
We have a requirement that we must assign a special number "mask" (<sequence number> - <sales doc item> - <sequence number per quantity>) in the moment of the raising of the sales order. I really dont know if in the standard we can do that. If not, is there an user exit that we can use in the sales order for such?
Thanks in advance.
Adriano Cardoso

Hello Adriano
Not fully sure about your requirement.
But you can definitely assign Serial numbers to sales order items by selecting the item and choosing menu path Extras/Technical objects.
Firstly you have to set up the Serial Number Profile ( T Code OIS2) or use the standard delivered ones GG00/GG01. Both have the Serialization Procedure SDAU - Serial numbers in SD order and in case of GG00, the serial numbers are assigned automatically. I am not sure how automatic assignment works but you can test it. Of course, you need to specify the Profile in the material master to use the functionality.
Hope this helps.

Update error in RV_SALES_DOCUMENT_ADD during Sales order creation

I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
Am I missing any configuration parameters?
Thanks,
Chitra

Yes , I can see the error in ST22.
While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
- I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
    Analysis of error shows:
     Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
      Fails in the Read table in one of the form
        Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
The main program was "RSM13000 ". In the source code you have the termination point in
line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
of the (Include) program "LV45UF0V".
The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
Thanks,
Csuman

Duplicate purchase oredr number message need in sale order creation

Hi,
My requirement is for a user exit for sales order creation.
When user create a sales order and put customer purchase order number based on purchase order number
user entered it will check data base table and if its duplicate entry then throw the error.
So, Requirement is :
1: Give error for duplicate purchase order number.
I need user exit name.
Please help.
Regards,
Moderator Message: Please search before posting basic questions. Thread locked.
Edited by: Neil Gardiner on Apr 29, 2011 9:31 AM

Whether to allow duplicate PO numbers from a customer is a configuration setting.... However, what you're asking seems strange.... what has company code got to do with it, unless you want to allow PO numbers to dupllicate across SAP company codes...e.g., customer orders on PO #1 from company code 001 and PO #1 from company code 002....
Usually, we would want to apply duplicate PO code checking at the customer number level, wouldn't we? If customer 1 sends me PO #1 and customer 100 sends me PO #1, I certainly would want to accept both orders.
Consult your SD functional specialist about configuring this option.

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

Performance of Sales order creation on Business Suite on HANA

Hi,
I understand that HANA column tables are read and insert optimized. I would like get some clarification on the following scenario.
Assume that in the ECC (non HANA DB) the sales order creation process is taking few hours to complete due to the sheer number of line items and associated bill of materials, serial numbers etc. If the same process is running on the Business suite on HANA system will there be any considerable performance improvement (because HANA column tables are insert optimized)?
Thanks for your help on this.
Thanks
Vinod

Yes Vinod,
that is the general idea.
For more details please have a look at Hasso Plattner's latest book A Course in In-Memory Data Management: The Inner Mechanics of In-Memory Databases.
R/3 updates the row table based on V1 or V2 priorities and writes the changes to the change log tables in the background.
With HANA application we can eliminate the need for the change log tables and table locking, by inserting the changes for particular fields into the columnar tables of the application with a time stamp immediately, and therefore also enabling real-time reporting.
For traditional RDBMS based applications the notion was that the faster read from the row tables which only hold the latest updates justifies the update of the changelog tables. In order to optimize this update process required by the traditional RDBMS-based systems, a single sales document was split into many smaller tables, like for example header table VBAK and item table VBAP and separate status tables for these header and items, which also made it more challenging to build reports on the complex set of individual tables.
Indices and aggregates could be more easily build from the single row records, but on the flipside after each update to the row table, the indices and aggregates needed to be re-build or scheduled for rebuild at a later point in time. Not only the application-build index tables and aggregates, but also the secondary index tables created by the DBA tuning efforts.
Overall tons of overhead especially for business processes with a many updates like sales order re-scheduling based on MRP runs.
With HANA this is no longer necessary as the latest information and the time travel from the columnar store can be accessed instantaneously across all inserts and therefore eliminates the need for any overhead of the index and aggregates as well as the changelog tables. In addition the split of document information into many smaller tables can now be avoided, so that we might not see any header tables and their dependent tables anymore.
We will provide more updates as they become available in the S/4 SAP S/4 Business Suite on SAP HANA (FAQ)
Thank you
erich

User Exit during Sales Order Creation - New Line Item needed

I have a situation during the process of sales order creation. If a Material in a line item has say 27 EA and the Base Unit is EA. But the Sales Unit is CSE. Then whenever the user enters 27 EA and presses enter he should get two line items.
The first line item needs to convert to maximum number of CSE posible and the rest will be the second line item with the remaining EA. The order isn't important but that is what is needed. Question is how do I approach this problem and code my user exit accordingly and where do I code it.
I was looking at SAPMV45A and saw the program MV45AIZZ which is meant as a user exit for any PAI event handling. If anybody has encountered this kind of requirement can you please share your view on this.
I will definitely reward points for useful answers.
Clark

Hello Mahendra
The requirement is as follows :
PART 1:
Sales Order Enter:
1.     When a line item is entered on a sales order (VA01 or VA02), at enter, check the sales unit of measure (VBAP-VRKME).
     Do not check line items where item category (VBAP-PSTYV) = TANN, TAPS or ZTAP. TANN are free goods that should not be considered for consolidation. TAPS & ZTAP are lower level materials as a result of product selection. They will be attached to a higher-level material with an item category of TAX, which is relevant for consolidation.
     Do not check items where VRKME <> EA
2.     If VRKME = EA, go to MARM for MATNR.
3.     Go to record where alternate unit of measure (MEINH) = CSE, get the value from the numerator field (UMREZ).
4.     Divide the order quantity (VBEP-WMENG) by UMREZ.
5.     If the result is greater than 1.0, the customer has ordered more than one case and a new line item needs to be added to the sales order for the case quantity.
6.     Add a new line to VBAP for the same material with the case quantity. If not a whole value, the remainder of eaches (bottles) should update the qty on the first item on VBAP.
     Part 1 is relevant for order types ZCA, ZOR, ZSO, RE, ZSM
PART 2:
Batch Job to run prior to the Delivery Due List:
1.     Read VBUK for Delivery Status (LFSTK) = A (delivery not processed). Get all of the document numbers (VBELN).
2.     Go to VBEP for those document numbers to get the goods issue date for the order. There will be many records in VBEP for the same sales order. Look at all orders with a goods issue date (WADAT) of next day.
3.     Go to VBAK for those document numbers to see if there are multiple sales orders for the same Sold To party (KUNNR).
4.     For customers who have more than one order in VBAK, search all line items (for all orders). If there are no duplicate materials across sales orders, do nothing.
     Do not check line items where item category (VBAP-PSTYV) = TANN, TAPS or ZTAP. TANN are free goods that should not be considered for consolidation. TAPS & ZTAP are lower level materials as a result of product selection. They will be attached to a higher-level material with an item category of TAX, which is relevant for consolidation.
     Do not check line items where reason for rejection (VBAP-ABGRU) is not blank
5.     If there are duplicate materials, go through the same logic as in part 1. If the quantity across the sales orders adds up to greater than one case, add the appropriate quantity to a new line item on the first sales order.   If there is a remainder qty, update the line item on the first sales order with this qty. In this case, the quantities on the second sales order needs to be closed out with a reason for rejection code of 50, Line Item Consolidation. If there is no remainder, update the qty on this item directly.
     Part 2 is relevant for order types ZOR, ZCA, ZSM
     This batch job will have to be run manually for Day Pick orders. The end of this program should automatically kick off the delivery due list for Day Pick orders, shipping condition 02.
Business Justification:
The business requires that like order line items be consolidated to one line item prior to the order going to the warehouse for picking. This will aid in picking at the warehouse as well as result in the customer invoice not reflecting more than one line item for the same material. In the case where the customer has truly ordered more than a case, i.e;, 1 case, 2 bottles, the documents in SAP will still reflect 2 lines.

BAPI for Sales Order Creation.

Hello gurus,
I want to create a sales order using BAPI.
I have tried some BAPI's like BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDATA, BAPI_SALESDOCU_CREATEWITHDIA.
But I am not able to update the Miscellaneous Information like Mode of transport(VBAP-OIC_MOT), Forwarding Agent(VBAP-OIC_LIFNR), Base Location(VBAP-OIA_BASELO), Truck Number(VBAP-OIC_TRUCKN), Pipeline trip No.(VBAP-OIC_PTRIP), Pipeline operator´s external batch number(VBAP-OIC_PBATCH).
Is there any other BAPI thru which i can update these fields while creation of Sales Order.
The Fields which I can provide to BAPI as import parameter is:
Order Type(VBAK-AUART),
Contract(VBAK_VGBEL),
SALES Org (VBAK-VGORT),
Dist Channel(VBAK-VTWEG),
Division (VBAK-SPART),
Open Quantity (VBAK-KWMENG)
Plant(VBAP-WERKS)
Storage Location (VBAP-LGORT)
Mode of transport(VBAP-OIC_MOT), Forwarding Agent(VBAP-OIC_LIFNR), Base Location(VBAP-OIA_BASELO), Truck Number(VBAP-OIC_TRUCKN), Pipeline trip No.(VBAP-OIC_PTRIP), Pipeline operator´s external batch number(VBAP-OIC_PBATCH).
Thanks In Advance,
Points will be rewarded for Best Solution......
Yogesh Sharma

hi,
I can give u a suggestion .. try it ..
its a quite a long process....
in BAPI_SALESORDER_CREATEFROMDAT2
there is a table EXTENSIONIN...
here u can add append structure and carry on ur sales order creation
Follow the process
Customer Enhancement for VBAK, VBAP, VBEP
Description
You can use this parameter to transfer user-specific enhancments to a BAPI. The customer has to complete the EXTENSION structure and the system automatically continues processing it. If you have not defined any user-specific fields, then you can transfer a blank EXTENSIONIN structure.
Technical information about Customer Enhancements
The following description uses an example to explain how to proceed with customer enhancements to the SD tables VBAK, VBKD, VBAP and VBEP.
The customer has added their own fields to table VBAP using the INCLUDE structure CUTEST. This structure contains 2 fields:
CFIELD1, CHAR 10
CFIELD2, CHAR 3.
The customer also requires that these two fields can be maintained with the BAPI.
1. Maintain structure CUTEST in table VBAP
2. Because the BAPIs work with checkboxes, you must also define a CUTESTX checkbox for the customer structure. It should be structured like this:
Field name       Data element
CFIELD1            CHAR1
CFIELD2          CHAR1
3. Define these customer structures in the structures VBAPKOZ und VBAPKOZX using INCLUDE or APPEND.
4. Add the customer structures to the BAPE_VBAP and BAPE_VBAPX BAPI structures using the APPEND technique.
5. Adjust the following structures for customer enhancements to table VBAK:
a) VBAKKOZ
b) VBAKKOZX
c) BAPE_VBAK
d) BAPE_VBAKX
6. Adjust the following structures for customer enhancements to table VBEK:
a) VBEPKOZ
b) VBEPKOZX
c) BAPE_VBEP
d) BAPE_VBEPX
7. Generally, the data should be added to the BAPI interface in the internal communication structures (VBAKKOM, and so on). There, you can process the data in the SD tables (VBAK, and so on).
8. If the EXTENSIONIN parameter contains customer data, you must complete at least the key fields in the relevant standard parameters.
For example:
You want to change customer field VBAP-CFIELD2 for item 20 to "XYZ" in order 4711.
The following entries are expected:
Import:     BAPIVBELN-VBELN       = '0000004711' Document number
            BAPISDHD1X-UPDATEFLAG = 'U'           UPDKZ for doc header
Tables:     BAPISDITM-ITM_NUMBER = '000020'      Item number
            BAPISDITMX-ITM_NUMBER = '000020'      Item number
          + BAPISDITMX-UPDATEFLAG = 'U'           UPDKZ for item
You must complete the EXTENSION table as follows:
STRUCTURE                          VALUEPART1       1234561234567890123
BAPE_VBAP                       0000004711000020                 XYZ
BAPE_VBAPX                      0000004711000020       X
Further Information
You can find more information in the BAPI programming guide in the chapter for enhancements to BAPIs.
Notes
You must complete the STRUCTURE field with the name of the relevant enhancement structure (BAPE_VBAK, BAPE_VBAP, BAPE_VBEP). You can complete the remaining fields with the append structures from the enhancement structures.
At the moment, you can use the BAPI to store enhancements in the following structures:
VBAK : An enhancement to header data requires an append structure to BAPE_VBAK and an enhancement to structure VBAKKOZ.
VBAP : An enhancement to item data requires an append structure to BAPE_VBAP and an enhancment to structure VBAPKOZ.
VBEP : An enhancement to schedule line data requires an append structure to BAPE_VBEP and an enhancement to structure VBEPKOZ.
VBKD : If you are using an enhancement for header data, you must add an append structure to BAPE_VBAK. You also need to enhance structure VBAKKOZ. If it is for item data, you need to add an append structure to BAPE_VBAP. You must also enhance structure VBAPKOZ.
If you also want to work with checkboxes, each X-structure must also contain an append structure.
For example:
A customer has created an order and wants to include the material long text (50 digits long).
The EXTENSIONIN structure must be completed with BAPE_VBAP. Two fields have fixed definitions in this structure. These are in the VBAP host key (VBELN, POSNR). The customer sets up an append structure that contains field ZMAT50.
Because the VBELN is normally blank when you create an order, the data can look like this:
STRUCTURE   |BAPE_VBAP
VALUEPART1 |          000010Customermateriallongtext50
              VBELN     POSNR ZMAT50

Userexit in BAPI sales order creation

HI all,
My requirement is one SERIALNUMBER field add BAPI salesorder creation.
That field not existed in satndard BAPI structures.BAPI input XML file.
Salesorder>extras(menu)>Technical object->serialmumber[RIPW0SERNR).
please give any enhancement serial number BAPI sales order creation.
Thanks.
Edited by: sreddy GPs on Sep 23, 2008 5:59 AM

Hello,
Whatever the Structure that you are refering to in the BAPI for Sales Order Creation, use an Append Structure to add the SERIALNUMBER field to the existing Standard BAPI Structure.
For your information, the following are the BAPIs that can be used for Sales Order Creation.
BAPI_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_SALESORDER_CREATEFROMDATA
BAPI_SALESORDER_CREATEBOS
Hope it would serve your purpose.
Thanks and Regards,
Venkat Phani Prasad Konduri

One time Discount Coupon to be used during the Sales Order Creation

I need help to configure a one time coupon to be used during a Sales Order creation. During 2009 our customers that have purchased more than certain amount we are going to give them a discount Coupon with a code that they can use just one time during his next purchase. I need help to configure this request.
Thanks

Hi Gilberto
Go VK11.
After maintaining the material & price, please go to -->Additional data.
You will be displayed with Validity, Assignments, Assignments for retail promotion, Limits for Pricing, Payments.
In the 'Limits for Pricing' you have three options - Max. condition value, Max number of orders & Max condition base value.
In the Max number of Orders - enter 1 to avail this special price only for first order.
Importent Note: to activate the ' Limit of Pricing' -- you need to tick 'Condition update' for the particular contion type, in condition type customising.
FOr eg. condition type - ZR00 - you need to have special price for this condition type & want to limit only for first order order.
In the customising for ZR00 - 'condition update' need to be ticked, then only you can get the above option.
i hope it is clear to you
thank you
Anirudh

Sales order creation, standard event trigger is taking long time .

We have a requirement where we are sending data to CRM system using RFC function module. This data is sent while sales order creation or change. We have used standard event BUS2032.CREATED to trigger CRM FM in sales order creation mode. In sales order change mode, we are using custom event. In production system, our custom change event is getting triggered fine and data is sent to CRM system with small time lag of around 1 minute. But, while sales order creation, standard event trigger is taking long time ( sometimes about 20 minutes) in production system.
We tried triggering same custom event at the time of sales order creation using FM u2018SWE_EVENT_CREATE_IN_UPD_TASKu2019 as well but, still we are not able to improve performance of the event trigger at sales order creation.
Regards,
Sushee Joshi

HI,
we have written SWE_EVENT_CREATE in update task
I think instead of calling in update task simply call to function module CALL FUNCTION "SWE_EVENT_CREATE" might trigger the event immediately.. Did you try to check in this way..
OR
And I also suggest you to check the entry in SWE2 txn with respect to your workflow tempalte, may be you have enable the option ENABLE EVENT QUEUE, this could be one of the reasons.. If it is enabled please disable it (uncheck)
Please check..
Regards
Pavan

Sales order creation with bapi in webdynpro using table control

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items. Pls give me some idea to resolve this issue, here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2' method CREATE_SALES_ORDER .
Declaration for Order Header Node DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

Sales order creation with bapi in webdynpro

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items.
Pls give me some idea to resolve this issue,
here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2'
method CREATE_SALES_ORDER .
Declaration for Order Header Node
DATA: node_order_header TYPE REF TO if_wd_context_node,
       elem_order_header TYPE REF TO if_wd_context_element,
       stru_order_header TYPE if_componentcontroller=>element_order_header .
Declaration for Order Items Node
DATA: node_order_items TYPE REF TO if_wd_context_node,
       elem_order_items TYPE REF TO if_wd_context_element,
       stru_order_items TYPE if_componentcontroller=>element_order_items .
Declaration for Order Partners Node
DATA: node_order_partners TYPE REF TO if_wd_context_node,
elem_order_partners TYPE REF TO if_wd_context_element,
stru_order_partners TYPE if_componentcontroller=>element_order_partners .
node_order_header = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_header
elem_order_header = node_order_header->get_element( ).
elem_order_header->get_static_attributes(
IMPORTING static_attributes = stru_order_header
<ORDER_ITEMS> via lead selection
node_order_items = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_items ).
elem_order_items = node_order_items->get_element( ).
elem_order_items->get_static_attributes(
IMPORTING static_attributes = stru_order_items ).
<ORDER_PARTNERS> via lead selection
node_order_partners = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_partners ).
elem_order_partners = node_order_partners->get_element( ).
elem_order_partners->get_static_attributes(
IMPORTING static_attributes = stru_order_partners ).
DATA: v_sales_doc TYPE bapivbeln-vbeln.
DATA: w_order_header_in TYPE bapisdhd1,
      i_order_header_in TYPE table of bapisdhd1,"
      i_order_partners TYPE TABLE OF bapiparnr,
      w_order_partners TYPE bapiparnr,
      i_return TYPE TABLE OF bapiret2,
      w_return TYPE bapiret2,
      i_order_items_in TYPE TABLE OF bapisditm,
      w_order_items_in TYPE bapisditm,
      i_order_conditions_in TYPE TABLE OF bapicond,
      w_order_conditions_in TYPE bapicond,
      w_order_SCHDL type BAPISCHDL,
      i_order_SCHDL type table of BAPISCHDL.
Order Header Details
CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, w_order_SCHDL, i_order_SCHDL.
refresh : i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, i_order_SCHDL.
w_order_header_in-doc_type = stru_order_header-doc_type.
w_order_header_in-sales_org = stru_order_header-sales_org.
w_order_header_in-distr_chan = stru_order_header-distr_chan.
w_order_header_in-division = stru_order_header-division.
w_order_header_in-req_date_h = stru_order_header-req_date_h.
w_order_header_in-sales_dist = stru_order_header-sales_dist.
w_order_header_in-purch_no_c = stru_order_header-purch_no_c.
Order Item Details
CLEAR: i_order_items_in,w_order_items_in.
w_order_items_in-itm_num = stru_order_items-itm_num.
w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER.
w_order_items_in-material = stru_order_items-material.
w_order_items_in-target_qty = stru_order_items-target_qty."'5'.
w_order_items_in-target_qu = stru_order_items-target_qu."'5'.
w_order_items_in-plant = stru_order_items-plant.
w_order_items_in-target_val = stru_order_items-target_val.
w_order_items_in-currency = stru_order_items-currency.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input = w_order_items_in-material
   IMPORTING output = w_order_items_in-material.
APPEND w_order_items_in TO i_order_items_in.
Order Partner Details
CLEAR: i_order_partners,w_order_partners.
w_order_partners-partn_role = stru_order_partners-partn_role.
w_order_partners-partn_numb = stru_order_partners-partn_numb.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING input = w_order_partners-partn_numb
   IMPORTING output = w_order_partners-partn_numb.
APPEND w_order_partners TO i_order_partners.
Order Condition Details
w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'.
         w_order_SCHDL-req_qty     = stru_order_items-target_qty." '5'.
          APPEND w_order_SCHDL to i_order_SCHDL.
Create Sales Order BAPI Call
*loop at i_order_header_in into w_order_header_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
   order_header_in = w_order_header_in
   IMPORTING
     salesdocument = v_sales_doc
     TABLES
       return = i_return
       order_items_in = i_order_items_in
       order_partners = i_order_partners
        order_schedules_in = i_order_SCHDL
       order_conditions_in = i_order_conditions_in.
Get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
        l_message_manager    TYPE REF TO if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
CALL METHOD l_current_controller->get_message_manager
    RECEIVING
      message_manager = l_message_manager.
DATA: v_message_text TYPE string.
When Sales Order is created commit the data
IF NOT v_sales_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
      wait = 'X'.
    CONCATENATE 'Sales Document' v_sales_doc 'has been created.'
    INTO v_message_text SEPARATED BY space.
Report Success message
    CALL METHOD l_message_manager->report_success
    EXPORTING message_text = v_message_text.
    ELSE.
      v_message_text = 'Error Creating Sales Order'.
Report Error message
      CALL METHOD l_message_manager->report_error_message
      EXPORTING message_text = v_message_text.
      ENDIF.
*endloop.
endmethod.
and code for table control i am using is
method WDDOINIT .
Types : Begin of item_tab,
        itm_number type bapisditm-itm_number,
        material type bapisditm-material,
        plant type bapisditm-plant ,
        target_qty type bapisditm-target_qty,
        target_qu type bapisditm-target_qu,
        target_val type bapisditm-target_val,
    currency type bapisditm-currency,
        end of item_tab.
*Creating internal table and Work Area of the same structure
*as that of the Node created.
Data : it_item type standard table of item_tab,
        wa_item type item_tab.
*Appending Blank Work Area to Internal table.
***********************************************888
*LOOP AT it_item INTO wa_item.
**wa_item-itm_number to bapisditm-itm_number.
**wa_item-material to bapisditm-material.
**wa_item-plant to bapisditm-plant.
**wa_item-target_qty to bapisditm-target_qty.
**wa_item-target_qu to bapisditm-target_qu.
**wa_item-target_val to bapisditm-target_val.
**wa_item-currency to bapisditm-currency.
   APPEND wa_item TO it_item.
*ENDLOOP.
**********************************************88
Do 10 times.
Append wa_item to it_item.
enddo.
"Binding the table
DATA lo_nd_order_items TYPE REF TO if_wd_context_node.
DATA lt_material TYPE wd_this->Elements_material.
navigate from <CONTEXT> to <MATERIAL> via lead selection
lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ).
@TODO handle non existant child
IF lo_nd_material IS INITIAL.
ENDIF.
@TODO compute values
e.g. call a model function
lo_nd_order_items->bind_table( new_items =
it_item set_initial_elements = abap_true ).
endmethod.

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items.
Pls give me some idea to resolve this issue,
here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2'
method CREATE_SALES_ORDER .
Declaration for Order Header Node
DATA: node_order_header TYPE REF TO if_wd_context_node,
       elem_order_header TYPE REF TO if_wd_context_element,
       stru_order_header TYPE if_componentcontroller=>element_order_header .
Declaration for Order Items Node
DATA: node_order_items TYPE REF TO if_wd_context_node,
       elem_order_items TYPE REF TO if_wd_context_element,
       stru_order_items TYPE if_componentcontroller=>element_order_items .
Declaration for Order Partners Node
DATA: node_order_partners TYPE REF TO if_wd_context_node,
elem_order_partners TYPE REF TO if_wd_context_element,
stru_order_partners TYPE if_componentcontroller=>element_order_partners .
node_order_header = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_header
elem_order_header = node_order_header->get_element( ).
elem_order_header->get_static_attributes(
IMPORTING static_attributes = stru_order_header
<ORDER_ITEMS> via lead selection
node_order_items = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_items ).
elem_order_items = node_order_items->get_element( ).
elem_order_items->get_static_attributes(
IMPORTING static_attributes = stru_order_items ).
<ORDER_PARTNERS> via lead selection
node_order_partners = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_partners ).
elem_order_partners = node_order_partners->get_element( ).
elem_order_partners->get_static_attributes(
IMPORTING static_attributes = stru_order_partners ).
DATA: v_sales_doc TYPE bapivbeln-vbeln.
DATA: w_order_header_in TYPE bapisdhd1,
      i_order_header_in TYPE table of bapisdhd1,"
      i_order_partners TYPE TABLE OF bapiparnr,
      w_order_partners TYPE bapiparnr,
      i_return TYPE TABLE OF bapiret2,
      w_return TYPE bapiret2,
      i_order_items_in TYPE TABLE OF bapisditm,
      w_order_items_in TYPE bapisditm,
      i_order_conditions_in TYPE TABLE OF bapicond,
      w_order_conditions_in TYPE bapicond,
      w_order_SCHDL type BAPISCHDL,
      i_order_SCHDL type table of BAPISCHDL.
Order Header Details
CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, w_order_SCHDL, i_order_SCHDL.
refresh : i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, i_order_SCHDL.
w_order_header_in-doc_type = stru_order_header-doc_type.
w_order_header_in-sales_org = stru_order_header-sales_org.
w_order_header_in-distr_chan = stru_order_header-distr_chan.
w_order_header_in-division = stru_order_header-division.
w_order_header_in-req_date_h = stru_order_header-req_date_h.
w_order_header_in-sales_dist = stru_order_header-sales_dist.
w_order_header_in-purch_no_c = stru_order_header-purch_no_c.
Order Item Details
CLEAR: i_order_items_in,w_order_items_in.
w_order_items_in-itm_num = stru_order_items-itm_num.
w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER.
w_order_items_in-material = stru_order_items-material.
w_order_items_in-target_qty = stru_order_items-target_qty."'5'.
w_order_items_in-target_qu = stru_order_items-target_qu."'5'.
w_order_items_in-plant = stru_order_items-plant.
w_order_items_in-target_val = stru_order_items-target_val.
w_order_items_in-currency = stru_order_items-currency.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input = w_order_items_in-material
   IMPORTING output = w_order_items_in-material.
APPEND w_order_items_in TO i_order_items_in.
Order Partner Details
CLEAR: i_order_partners,w_order_partners.
w_order_partners-partn_role = stru_order_partners-partn_role.
w_order_partners-partn_numb = stru_order_partners-partn_numb.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING input = w_order_partners-partn_numb
   IMPORTING output = w_order_partners-partn_numb.
APPEND w_order_partners TO i_order_partners.
Order Condition Details
w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'.
         w_order_SCHDL-req_qty     = stru_order_items-target_qty." '5'.
          APPEND w_order_SCHDL to i_order_SCHDL.
Create Sales Order BAPI Call
*loop at i_order_header_in into w_order_header_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
   order_header_in = w_order_header_in
   IMPORTING
     salesdocument = v_sales_doc
     TABLES
       return = i_return
       order_items_in = i_order_items_in
       order_partners = i_order_partners
        order_schedules_in = i_order_SCHDL
       order_conditions_in = i_order_conditions_in.
Get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
        l_message_manager    TYPE REF TO if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
CALL METHOD l_current_controller->get_message_manager
    RECEIVING
      message_manager = l_message_manager.
DATA: v_message_text TYPE string.
When Sales Order is created commit the data
IF NOT v_sales_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
      wait = 'X'.
    CONCATENATE 'Sales Document' v_sales_doc 'has been created.'
    INTO v_message_text SEPARATED BY space.
Report Success message
    CALL METHOD l_message_manager->report_success
    EXPORTING message_text = v_message_text.
    ELSE.
      v_message_text = 'Error Creating Sales Order'.
Report Error message
      CALL METHOD l_message_manager->report_error_message
      EXPORTING message_text = v_message_text.
      ENDIF.
*endloop.
endmethod.
and code for table control i am using is
method WDDOINIT .
Types : Begin of item_tab,
        itm_number type bapisditm-itm_number,
        material type bapisditm-material,
        plant type bapisditm-plant ,
        target_qty type bapisditm-target_qty,
        target_qu type bapisditm-target_qu,
        target_val type bapisditm-target_val,
    currency type bapisditm-currency,
        end of item_tab.
*Creating internal table and Work Area of the same structure
*as that of the Node created.
Data : it_item type standard table of item_tab,
        wa_item type item_tab.
*Appending Blank Work Area to Internal table.
***********************************************888
*LOOP AT it_item INTO wa_item.
**wa_item-itm_number to bapisditm-itm_number.
**wa_item-material to bapisditm-material.
**wa_item-plant to bapisditm-plant.
**wa_item-target_qty to bapisditm-target_qty.
**wa_item-target_qu to bapisditm-target_qu.
**wa_item-target_val to bapisditm-target_val.
**wa_item-currency to bapisditm-currency.
   APPEND wa_item TO it_item.
*ENDLOOP.
**********************************************88
Do 10 times.
Append wa_item to it_item.
enddo.
"Binding the table
DATA lo_nd_order_items TYPE REF TO if_wd_context_node.
DATA lt_material TYPE wd_this->Elements_material.
navigate from <CONTEXT> to <MATERIAL> via lead selection
lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ).
@TODO handle non existant child
IF lo_nd_material IS INITIAL.
ENDIF.
@TODO compute values
e.g. call a model function
lo_nd_order_items->bind_table( new_items =
it_item set_initial_elements = abap_true ).
endmethod.

Reg : NO UPDATE OF SALES ORDER FROM PO erroer I0 114

hi experts,
while creation of PO with reference to PR,user gets error " NO UPDATE OF SALES ORDER FROM PO erroer I0 114 ".
What could be the reason for this error?any idea...
rgrds...

Hello Jurgen,
here the error message is " NO UPDATE OF SALES ORDER FROM PURCHASE ORDER error I0 114 " .
is there any solution for this issue.user looks frustrated because its working for one PO and the next PO its showing error.
Rgrds.....

Serial Number update in sales order creation

Similar Messages

Maybe you are looking for