Serial number update on Lenovo X 3650 M5

Hello, please how can i update serial number on lenovo system X 3650 M5 server. please send me link if any bootable utility.

You can download the IBM ASU (up to version 9.63) from here:
https://www-947.ibm.com/support/entry/myportal/docdisplay?lndocid=tool-asu
If you are looking for ASU for new Lenovo Products, please refer to the following link:
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=LNVO-ASU
To change the serial number information, use the following syntax:
ASU set SYSTEM_PROD_DATA.SysInfoSerialNum SN_info
where SN_info is the serial number of the system.
For example:
ASU set SYSTEM_PROD_DATA.SysInfoSerialNum 1234567

Similar Messages

X240 serial number update. Please help!!

New Lenovo X240 has extra digits on machine type and serial number.
I normally update serial number using a original method that boots into a utility, serialize new System Board starting:
1S(machine type)(serialnumber) (total 16digits) and system should be successfully setup
New product has extra digits so I could not update new serial number for the unit.
I'm seeking help from expert here in this forum. Please help !!
Thanks
Big

sameeroquai wrote:
What happened to my serial number? Should I be notifying apple?
It's nothing to worry about. If the logic board is replaced, there will no longer be a serial number visible to the OS. Just continue to give the one that's on the bottom of the iMac's foot, or on the box it came in.
The logic boards they use for repairs are refurbished and they just remove the serial number from them before they send them out to the people doing the actual repair. And the people doing the repair don't have the equipment required to add back the serial number.
charlie

SHPCON serial number updates item on delivery but not item in HU

I am using SHPCON to update the item on delivery with serial numbers. After that I use SHPCON to pack that same item in a handling unit. From the pack screen I should be able to select the item and hit the serial number button and see the serial number. Instead it says there is no serial number on the item. I populated E1EDL11 under E1EDL24 to get the serial number on the item. I also tried during packing populating E1EDL46 under the HU item E1EDL44 but that doesn't work either.
Anybody run into this issue?

Hi,
If your Sloc is HU managed then need to maintain serial numbers in HU only.
i think you are doing packing at shipment level, HU should packed and serial numbers assigned then finally assigned to shipment document.
Rgds,
Kris.

Serial number updation in Assets after GR & MIRO for PO

Hi Experts,
I need a help on the following
We are buying for example 10 Laptops. we have created the Laptop as Asset , Created the Laptop as Material master and Maintained the serial number profile in Material master.
We created a PO with account assignment as "Asset" and included the Asset in PO, did the Goods Receipt with reference to this Asset account assigned PO, then at GR system asks for the Serial number and entered the Serial number and saved.
Did the MIRO for this PO and asset values are posted.
But after GR/MIRO System has updated only the quantity and Values not this Serial number.
I need to check how the system will update the Serial number in Assets, because there is a field in Asset display AS03 --serial no.
but here there is no update of the serial number.
Is there is any config settings is there for this. Please share your information on this.
Thanks in advance.
rgds
Swamy

Hi Gurus,
Any updation or some reply on this thread.
Please share your thoughts .
rgds
Swamy

RG23C-Part -I Serial Number Updation-Issue

Hi CIN Gurus,
        I am facing a problem in excise sap 4.7 version, wherein if I do the capital goods receipt via MIGO and also capturing excise invoice or creating only part-I entry along with it , the system is giving me 2 serial numbers with receipt and issue indicator for the MIGO Material document number in Table J_1IPART1.
       My client is not agreeing with the concept of two serial numbers for the same transaction and also in the PART-I register system is giving the serial number with receipt indicator. The client is reluctant to accept because there will be a gap in the excise serial number Part-I which is not acceptabe for excise authorities.
        Is there any remedy for making it to 1 serial number.
Thanks in advance and points will be suitably rewarded.
Regards
Gopal

Hi Gurus,
Any updation or some reply on this thread.
Please share your thoughts .
rgds
Swamy

IWork '08 serial number update help?

Can anyone please tell me if there is a straight forward way to update the iwork '08 serial number from a single user license to a family pack license? There does not seem to be a supported way to enter the new number, even after a re-install. Any feedback would be greatly appreciated!

It seems that re-installing the package leaves the existing preferences files.
Run this short simple script to remove them.
--\[SCRIPT]
set p2pl to path to preferences from local domain as text
set p2pu to path to preferences from user domain as text
tell application "Finder"
delete file (p2pl & "com.apple.iWork08.Installer.plist")
delete file (p2pl & "com.apple.iWork08.plist")
delete file (p2pu & "com.apple.iWork.Keynote.plist")
delete file (p2pu & "com.apple.iWork.Numbers.plist")
delete file (p2pu & "com.apple.iWork.Pages.plist")
end tell
--[/SCRIPT]
Yvan KOENIG (from FRANCE mardi 30 décembre 2008 20:42:39)

ThinkPad Edge E320 UUID & Serial Number update using WinFlash

Hi All,
I lost my UUID & Serial number during the UEFI update, I saw a way to update them in ThinkCentre M series but I could not apply it on my Edge E320, is there a semilar way to do the same using WinFlash on E320?
Thanks in advanc

After todays restart original baterry capacity is restored back to 62+Wh, But current capacity is still 54Wh, higher than after last battery reset. I am upgrading to higher version of Power Manager.

Serial Number update in sales order creation

Hi All,
i am replicating sales from from CRM to ECC. here i am getting serial number in vbap table z filed. but i need to pass this filed in line iten Extras-- Techinal Objects-- please tell me in which user exit i need to write a logic
thanks
ram

Hi
In this include :- MV45AFZZ, there is form routine :FORM userexit_move_field_to_vbap. check this routine this will be helpful to you.

Reg: Serial Number Updation automatically .

hi frnds
IN tcode VL02N after giving the Outbound Delivery number selecting PACKING button there Iu2019m creating the Dummy Handling unit. But after creating the handling when i double click ok on the HU clicking on the Contents tab in that selecting line item click on the button serial number there i can see only empty serial numbers . My requirement is want the serials number based on items automatically .
thanks,
santhosh

Hi,
Please refer SAP note:
841270
- How to import serial numbers correctly via the DTW
Thanks & Regards,
Nagarajan

IB:How to update a serial Number which has Inventory Material Transactions?

Dear friends
first of all thanks for your time and valuable solutions
Install base: How to update a serial Number which has Inventory Material Transactions
problem description:
Install base > quick search
Here is Installbase record, when I query from quick search
Rec#     Item          Item Instance           Serial Number          Status
1     300-7000-01      3000000           1000XXX-0538JQ0003 Return for Adv Exchange
2     300-7000-01     8000000               1000XXX-0538JQ0003-     Return for Adv Exchange
3     300-7000-01     5000000               1000XXX-0538JQ0003-A     Return for Adv Exchange
looking above data, first and third records are the legitimate serial numbers(correct according to the client specs), second record is not legitimate since it has a dash as suffix, we found there are many illegitimate serial Numbers exists, needs to be updated with the right serial Numbers which I analyzed in excel after pulling data from mtl_material_transactions , oe_order_lines_all , mtl_serial_numbers , mtl_system_items_b
basically these are all RMAs
I need to update the second record as 1094SUZ-0538JQ0003-B as per the guidelines, while updating I need to keep all the existing contracts, Warranty, what ever material transations it has, need to be same.
we have a package updating the serial numbers using IB API (csi_Item_Instance_Pub.update_item_instance) but it is updating only the records which has no serial numbers present for that instance, if there is a serial number already exists it is not working.
user define error msg "Serial Number 1094SUZ-0538JQ0003- has Inventory Material Transactions. This serial number cannot be used to update an existing Item Instance", but I need to update this anyway!! or am I missing something here, please advice me
below post looks like similar issue, talks about hard update, I have no clue, by doing that the updated serial number will have same transations, contracts, dates....attached to it like the previous serial number
IB UPDATE_ITEM_INSTANCE ERROR - doesn't allow ACTIVE_START_DATE to change
would be great If you guys help me out, really appreciated!!
unfortunately I couldn't find any solutoin in metalink for the existing serial number update
code for updating the serial number using IB API
          x_msg_count := 0;
x_msg_data := '';
p_instance_rec.instance_id := rec.child_instance_id;
p_instance_rec.serial_number := rec.child_serial_number;
p_instance_rec.object_version_number := rec.child_object_number;
p_txn_rec.transaction_id := Fnd_Api.g_miss_num;
p_txn_rec.transaction_date := SYSDATE;
p_txn_rec.source_transaction_date := SYSDATE;
p_txn_rec.transaction_type_id := 1;
csi_Item_Instance_Pub.update_item_instance
p_api_version => 1.0,
p_commit => Fnd_Api.g_false,
p_init_msg_list => Fnd_Api.g_false,
p_validation_level => 1,
p_instance_rec => p_instance_rec,
p_ext_attrib_values_tbl => p_ext_attrib_values_tbl,
p_party_tbl => p_party_tbl,
p_account_tbl => p_account_tbl,
p_pricing_attrib_tbl => p_pricing_attrib_tbl,
p_org_assignments_tbl => p_org_assignments_tbl,
p_asset_assignment_tbl => p_asset_assignment_tbl,
p_txn_rec => p_txn_rec,
x_instance_id_lst => x_instance_id_lst,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data
Thanks
Suri

Suri
Used this. May not be perfect but should get you there. Only if the table is registered (all the seeded tables should be registered) this will work.
select distinct a.table_name,b.column_name from fnd_tables a, fnd_columns b
where a.table_id=b.table_id
and upper(b.column_name) like '%SERIAL%'
Also this is very old one but if you need history for this change add the history insert logic as well..
DECLARE
l_return_err VARCHAR2 (80);
PROCEDURE debug (p_message IN VARCHAR2)
IS
BEGIN
dbms_output.put_line (SUBSTR (p_message, 1, 255));
END debug;
BEGIN
debug('======================================================================');
debug('Switching from serial number XDT07406. to XDT07406 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'XDT07406'
WHERE serial_num = 'XDT07406.';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'XDT07406'
WHERE new_serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
UPDATE wsh_delivery_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in wsh_delivery_details updated :'||sql%rowcount);
debug('======================================================================');
debug('Switching from serial number jct20591 to JCT20591 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'JCT20591'
WHERE serial_num = 'jct20591';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'JCT20591'
WHERE new_serial_number = 'jct20591';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_return_err :='Updating in one of the script has this error:'|| substrb(sqlerrm, 1, 55);
debug('Value of l_return_err='||l_return_err);
END;
Thanks
Nagamohan

K450e motherboard replaced now says error code 00ce machine type and serial number invalid

Hey guys i just got a replacement motherboard, after motherboard was replaced on bootup the computer says error code 00ce: machine type and serial number are invalid. How do i get rid of this error it was replaced by the same motherboard type that was previously in the system. How can i reset the bios or enter the serial etc? Lenovo tech support was no help.

Hi Qjafri829,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with serial number invalid error in your k450e desktop.
As the motherboard been replaced the serial number and MTM number must be updated this is a new motherboard, you can visit to the nearest authorized service center for the serial number update in the BIOS.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure
they will be a great help.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

「Serial Number Management」 Improvement

As far as Serial Number Management, SAP Business One is designed so that serial number update is done after specifying the serial number by narrowing down on Purchase Order or Delivery. However if an Item has a large number of Serial Number such as more than 100, it requires huge work to a user and it causes bad efficiency on the useru2019s business process.
We would like to add the following functionality on SAP Business One
1. Mfr Serial Number search (specifying a record) function on u201CSerial Number Management - Updateu201D screen
2. Mfr Serial Number update function on u201CSerial Number Detailu201D screen
<<Reference>>
Refer to the following inquiries on CHANNEL PARTNER PORTAL regarding this.
Message No.: 164313
Date: Feb. 13, 2009
<<Reason>>
When the user needs to change or delete Mfr Serial Number, they have to specify the target record by watching the list on the bottom of u201CSerial Number Management - Updateu201D screen. This operation is very troublesome in the case of a large number of serial number management. The list is not good enough to specify the target, becuase these serial numbers are not used sequence number. Since the user knows the target serial number, they want to specify it directly on u201CSerial Number Detailu201D screen. But SAP Business One doesnu2019t allow it with masking the data
<<Present specification>>
1. The user searches appropriate bill No. on u201CSerial Number Management ? Updateu201D and specify the target Mfr Serial Number form the list showed on the bottom of the screen by watching it.
2. The user update Mfr Serial Number directly.
<<Correspondence completion desired date>>
We hope that this SAP Business One modification is done by July. 27, 2009.
One of our new customers who claims this modification is going to launch SAP Business One system on July 1st. Even if this is not finished by then, please take care of this A.S.A.P.
<<When it is not possible to correspond>>
In many cases, its unit transaction is more than 1,000 and the user is required frequent serial number update. It is a huge problem for the user to search the target record from the list by only their eyes it gives serious impact for their business operations. If you do not fix this, we have to customize SAP Business One. It makes the cost higher and will be loosing SAP Business One business opportunity.
<<Business impact>>
Quite a few customers manage a large number of serial numbers par item. The current specification of SAP Business One is a burden to usersu2019 operation. It is totally wrong from business process improvement point of view. In order to avoid this, we have to customize SAP Business One for each user but it prevents us from providing SAP Business One with reasonable price in the market.
Edited by: Noriaki Miyazawa on Jul 3, 2009 3:50 AM

Thanks !
This question was in relation to sap note no 200231- Scrapping of Serial Numbers. I am not able to figure out how the user status can acheive this requirement and where I can change the user status?
My why not putting this question by giving reference to the sap note in the initial stage was that I wanted to figure out myself first and to avoid confusion among the community memebers.
Dear Jurgen can you help me on understanding this note. Meantime I will read the link sent by you and try to figure out and find in relation to this note how this can be done-- in whcih transaction.
I am giving details of sap note 200231- Scrapping of serial Numbers
Symptom
You can post a goods receipt again for a serial number that has been scrapped before.
Additional key words
Movement type, 551, 553, 555, available, AVLB, system status, usage decision, inspection lot, scrapping, MB1A
Cause and prerequisites
Several movements of serial numbers are grouped together for status update under goods issue (PMS8).
In addition to the reversal of a goods receipt and several consumption postings this also includes scrapping.
Solution
To prevent the usage of a scrapped serial number, you can use the user status logic.
However, the user status defined for this must either be set manually or with a subsequent (background) procedure.
If it is necessary to reverse a scrapping, you then would have to reset this user status manually again.
Regards

Unable to update the serial number through bdc in Sales Order

Hi experts,
I written the inboud FM for to update the 3rd party items serial number to the sales orders through BDC Call transaction Method.
Here i am facing a problem when i have the 19 item Quan ,it is updating correct through idoc , when ever there is moe than 19 and at that if any serial number repeated for that if i am changing at that time it is loosing the control of the BDC and giving the control to the salesorder screen.
how can i handle that control again has to come to BDC prgrm......
Thnks,
Regards,
Bharani

Hi,
Can you please let me know the segment in ORDERS05 Idoc to process the Payment card information and if the standard Function Module can handle the creation of a Sales Order with data for Payment Card.
We have a requirement to map the Tokenized Number of the Credit Card send from a store front end to ECC mapping via SAP-PI.
Thanks in Advance,

Adobe Updates not downloading - available but "try again later" error with link to "serial number not qualifying"

I just upgraded computers (PC w/Windows 8 64 bit) and I did a fresh install of my copy of Adobe Photoshop CS5 (along with Bridge and Camera Raw).
The install asked for serial numbers which I provided and the installation was a success - however, I can not view full resolution images, only thumbs
in Bridge and I can not open RAW files from my Canon 5D Mark III (though, I can my files with the older Canon 7D). I WAS able to view and work with
the newer RAW files on the older computer.
Under "Help", "Updates", it says they are available but after appearing to upload to my computers, I get this:
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
There is then a link to customer service which brings me to this:
Creative Cloud Help /
Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
What gives? It was a qualifying product a few months back. Even if Adobe stopped supporting CS5 (???), I should still have access to past updates
that I had already once received.
I tried 3 times in 1 hour - no luck in getting back to a state I was in only yesterday, and months earlier.
/Mitch

Apparently, Adobe has very little interest in it's past customers unless they shell out more cash.
I have never seen such a move as this - to REMOVE support and older update links off the Web in an effort to force an upgrade.
My tech support stated (after first stating I was simply out of luck) that he was graciously allowed to make an exception and provided me with a link to support that is strangely
hidden and /or removed from public access.
Here is that link:
Adobe Update Support Web Site: 1-28-2015
https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
/Mitch

Adobe creative cloud is asking for a serial number for updates - where do I get this from?

Adobe Creative cloud is asking for a serial number for updates - where do I get this from
we have recently Bought 5 x 1 year licences and been using this a month
Michael

Hi Mick,
Please refer to the below link.
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
Thanks

Serial number update on Lenovo X 3650 M5

Similar Messages

Maybe you are looking for