Serial number with external number range.

Dear all
pl how to configure the logice for serial number like gbrx123xeao120001here gbr is prefix code which is fixed x is model sufix,e is yaer of mfg 0001 is serialnumber. so now tell me how to generate the aboce said serial number when production order creation.
pl tell me all config and related settings .
thanks and regards
Baswaraj

Hi ,
Please mainatain the external number range for serial number management as
from 01 to 999999999....... and AAAA.....to ZZZZZZZZ.....
While doing goods movment you can use user exit to define serial number as per the customized calculations .
Also you can create seperate Zprogram for goods movement there u can calculate for Serial number and pass it to goods movement BAPI as per your requirement .
Hope this information helpful .
Best regards ,
Chithaanantham

Similar Messages

Sd invoices posting with External number range

Hi,
i am a fico consultant and dont know the proceedure that how to post SD invoice thorugh Sales orders with external number range?
while posting it is giving error like use internal number range.how to over come this.help me
Thanks
Prathima

Good Afternoon Prathima.
Use tcode OBA7
Look for Doc type RV Billing Doc trn.
This doc is generally used for posting Billing doc to accounting.
Here you would find Number range as external.
Reason: As per standard, the Accounting doc number is similar to your the Billing account.So, that there would not be any difference in numbers of both, therefore for accounting doc - Billing doc trnsfer (RV) the number range is Internal number but the Billing doc type will havre internal number range.
And as you are FI consultant, I don't feel I need to explain why or purpose these numbers should be similar from accounting point of view.
Hope it solved your query. Kindly reward.
Take care. JP.

Purchase Order (PO) Inbound with external number range

We need to create a interface for Purchase order Inbound.
The PO will be created in 3rd party system, and the information is sent thro IDoc(Orders05). How do we create a PO in SAP with the same PO number as in 3rd party system.
We have allowed PO with external number range.
I couldnt find a Segment or field where the PO number can be mapped in the IDOC.
Points will be offered for useful informations.
Thanks,
Sivaraman

Hi Sivaraman,
could you tell me how you solved it. I have the
same problem and didn't find the solution yet.
Thanks a lot!
Horst

How to get NEXT free NUMBER for EXTERNALLY assigned RANGEs - SNUM, MD91 ?

Hi Experts,
I know that, with the FM - NUMBER_GET_NEXT_V1, I can get the next # for most document #s.
But, this FM is ONLY applicable to INTERNAL NUMBER RANGE.
1 - But., am working with EXTERNAL NUMBER RANGE, so looking forward for a FM/BAPI, which gives me next free # for use.
2 - If nothing is there, How to get it done? Is directly grabbing the latest # from the table/data base?
3 - Any other ideas?
thanq

For an example
Look at Attributes for SAP function ' L_TO_CONFIRM_SU' . Observe the radio button 'REmote-enabled function module - 2nd one.
Then you can see under source code it calls other SAP FMs. This is where you call the SAP FM you found.
A remote enabled fm requires a Logical destination when called from a program- you might already know that.

How to get the Next free Number for External Number Range

Hi ,
To get next free number for External Number Range, I have used NUMBER_GET_NEXT Function module.
It is throws the exception like NUMBER_RANGE_NOT_INTERN.
How can i get the next free number for external number range object. And How to update the Current Number for External Number Range Object
Scenario.
Call Function module              NUMBER_GET_NEXT
Import Parameter.
NR_RANGE_NR : 02
OBJECT            : RV_BELEG
QUANTITY         : 00000000000000000001
I am getting Exception : NUMBER_RANGE_NOT_INTERN
Thanks in advance.
Regards
Ram

Hi Anand,
The SAP system issues the numbers for internal number range intervals automatically. This number is between the from-number and the to-number. The last number issued is logged in the current number level.
You need to enter a number for external number issue. The number you enter needs to be between the from-number and the to-number. For external number ranges, the number number used is not logged. So the next available number is not possible in a straight forward way.
Only for Internal number ranges, the FM NUMBER_GET_NEXT can get the next available number.
Hope this helps.
Thanks,
Balaji

Batch Number with Box number

Hello SAP Experts,
My Client has a unique requirement, they want system to track Batch number with Box number.
For Example if Batch number for incomming material is 123456, and if the entire quantity comes in 3 boxes, then the system should track the quantity as 123456/1 , 123456/2 and 123456/3.
Moreover, client wants to issue the materials box wise.
Is there any standard way of capturing this requirement.
Reply is awaited.
Regards
Prabhjot Singh

Hello,
Is there any way, by which I can assign Internal number ranges to the Batches in this scenario.
I have also tried to explore Handling unit management but in that case also we need to pack the material inside, but in my client's scenario they get the box from vendor and store it as it is.
Looking for positive solution.
Regards
Prabhjot Singh

GR posting with External No Range

Hi,
   Is it possible to create a GR with external number(for both Mtl and Acct document) with correspond to a PO number...
Thanks

Hi,
   Thanks for ur reply....
   In my scenario we are uploading the data which has been already created by a client...So we have one Mtl and acct document number(both are different numbers) for a PO number....
   No BAPI available for giving input of document no's...
Any idea in this regards....
Thanks

Synchronize HU number with SU number

I'm trying to figure out the appropriate way to sync the HU number with the SU number. When I post HU managed stock into the warehouse, I want the SU number to match the HU number.
The notes say "If HUM is active in your system (which it is), all stocks within the WMS are managed in storage units. These storage units are created with the same number as the handling unit. Numbers are assigned in this case using the handling units and not using storage unit management. Therefore, in this case you do not need to set up number assignment for storage unit management. SAP recommends only activating length conversion for storage unit numbers.
If I understand this correctly, if I do not define and assign a storage unit number range, this will happen automatically? Currently, I have an SU number range defined and all SUs are being posted into the warehouse using the next available number in this SU number range.
Your help is greatly appreciated!

Hi,
As to synchronize HU number with SU number, If you use handling unit management in Warehouse Management, you must activate storage unit management for all storage types in which you want to
store handling units. During the putaway, the system creates a storage unit for each handling unit of the transfer orders reference document. This storage unit has the same identification number as its "handling unit sister". When there are nested handling units, the storage unit corresponds to the outer-most handling unit. When partial quantities are picked from such multi-level handling units, the system displays a screen asking you for the lower-level handling unit for the pick or complete stock pick.
The numbering of the storage units is controlled by the number assignment parameters that are set for the handling units during handling unit management and not by the number range(s) of Storage Unit Management. You must therefore activate the storage unit number length conversion in Storage Unit Management Customizing. You must use the same number of signs that is used in the identification numbers for the handling units. The setting applies to all clients (menu path in the Implementation Guide: Logistics Execution u2192 Warehouse Management u2192 Storage Units u2192 Master Data u2192 Define Number Ranges u2192 Conversion exit for storage unit number).
Good luck
Z.T

Creation of HU in auto mode with external number range

Dear Experts,
         I'm stucking in a scenario related to HUM
There are two handling units -
1. Bag
2. Pallet
through T code HU02 , it's possible to create an HU and assign it internal generated number.
But as per our requirement , we want to assign the external number to the HU (which is barcode number of bag or pallet)
Can you pls let me know the process of assigning External number range to HU.
Also we want to create the HU automatically after GR in production (MIGO,101) , instead of manually via HU02.
Pls explin the process of creation of HU automatically also...
Thanks in advance..

Check with FM BAPI_HU_PACK.For packing an item into HU.
For external number range you need configure external number range
SPRO>Logistics - General>Handling Unit Management>Basics>Technical Basics-->Define Number Ranges for Handling Units.
After GR for production you need to confighre internal number range for perticular packing material type then system will automatically pack and place in HU location.
Please find some FM info
=========================
HU_BASIC_BAPIS                 Basic BAPIs for HUs
BAPI_HU_CHANGE_HEADER          Change Handling Unit Header Data
BAPI_HU_CREATE                 Create Handling Unit with Items
BAPI_HU_DELETE                 BAPI for Deleting Handling Units
BAPI_HU_DISPLAY_HISTORY        Displays HU History
BAPI_HU_GETLIST                Read Handling Units from the Database
BAPI_HU_GET_LIST_MSG           Select Handling Unit Output
BAPI_HU_PACK                   BAPI for Packing an Item into an HU
BAPI_HU_PROCESS_MSG            HU Output Processing
BAPI_HU_PROCESS_MSG_DIRECT     Select and Process Handling-Unit Outputs
BAPI_HU_REPACK                 Repack HUs and HU Items
BAPI_HU_UNPACK                 BAPI for Unpacking an Item from an HU
BOR_HU_DISPLAY                 Display an HU in Dialog Mode
===================================

Root org. unit with External number range

Hi all,
I have a unique requirement.
We need to create a root org. unit. I used PP0CE to do the same. But it would generate org. unit numbers internally i.e. system generated.
We would like to assign an external number range to the root org. unit created.
In case I try to create it using PP01, we have to provide a relationship to other org. unit while creating root org. unit in PP01.
It would be great if someone can tell me the solution for this issue.
Regards,
Bharat

Hi Bharat,
You can maintain number range even for org units, as follows:
Here
01 - plan version
A, C, O, P etc are object types
after selecting the respective ie 01O IN Ex ,
now click on maintain number range where you can clearly specify the number range either internal or external.
Then u can start with TC PPOCE
Thanks
Sai

Post depreciation with external number range assignement

HI
When i am running Depreciation run AFAB, i am getting error"created doucment number range with internal assignement.
Currently the number range assigned for documents is external.
Why this error is coming... please provide solution without changing number range to internal..
Thanks and regards
Ramarao.p

HI
see the SAP document .....
Specify Document Type for Posting of Depreciation
In this processing step you determine the document type for each company code for posting depreciation.
Standard settings
SAP supplies document type AF for depreciation posting.
Requirements
You must have defined the document number ranges.
Activities
1. Check the standard document type AF. If needed, define your own document type.
2. Specify the document type for depreciation posting. The document type you select must meet the following conditions:
It must be a document type for batch input.
It must be defined with external document number assignment
So please provide the solution ...with out changing internal number range...
Thanks and regards
Ramarao.p

Packing instructions - problem with external number range

Hi Gurus:
I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
I appreciate your valuable input
Tamas

For further records:
we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

Bapi with external number range

i am using bapi_goodsmvt_create.i want to assign external number range.how it possible?

It depends on whether you have a service master or not.
1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
Makes sense?
A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
Regards,
Ravi
Message was edited by: Ravikumar Allampallam

MM-SUS Scenario - BP Creation from MM with external number

Hi Gurus,
We are implementing MM-SUS scenario on landscape involving ECC 6.0 EHP5 and SRM 7.0 EHP1.
In connection with Vendor transfer from ECC to SUS, We want to achieve that ECC vendor and SUS business partner (BP) have the same number (I E: vendor 300000 in ECC has BP 300000 in SUS)
But in the tests we performed sending vendors executing on ECC tx BD14 (via PI system), SUS ever creates Business Partners with numbers from internal range in spite of we have available external number range.
Can anyone tell me if is possible or SUS is able in standard way, receive a vendor xml message and perform BP creation with the same number (XML field <PartnerID>) sended from ECC.
I appreciate any help of yours. Thanks in advance.
Regards,
Horacio Miranda

Than you very much again Nikhil.
Also SAP answered to us about this topic as how you did, and definetely is impossible manage in SUS same number for BPs as vendor number in ECC.
Regards,
Horacio Miranda

How to replace TLB order in APO (/sapapo/snptlb) with external number

Hi All,
I am trying to replace TLB order (ex. APO-0001) created in transaction /sapapo/snptlb with an external number generated by me
(ex. test-123). Can anyone suggest an FM or anymethod or process for the same.
Win full points by answering this simple question !!
Thanks - Chandan

Dear Chandan
You can make the settings in SPRO->APO->SNP->Basic setting-> Maintain Number Ranges for orders . Maintain the number ranage and Tick it as External.
When you Run TLB, You can provide the external number.

Serial number with external number range.

Similar Messages

Maybe you are looking for