Serial SATA with NCQ

I just picked up a new Seagate Barracuda hdd. it's a 500 Gb. 3 Gb. data rate SERIAL SATA interface with NCQ. Should I expect any trouble or need to set a jumper or something in order to use this hdd. in the neo4  system in my sig. Thanks

If you intend to use the disk as the one with Windows, I think you should use the SATA RAID function to get the most out of the disk. Load drivers by way of diskette or other media when the Windows installation suggests you should: F6-key.
If you don't use RAID function or only want the disk for normal storage jumper it to SATA 150:
"On-Board SATA
† nForce4 Standard supports 4 SATA ports. Transfer rate is up to 150MB/s.
† nForce4 Ultra supports 4 SATA II ports. Transfer rate is up to 300MB/s."
There are more than one 7125. I hope we are talking about this one:
http://www.msi.com/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=165
You get a manual there too. You seem to have misplaced yours. 

Similar Messages

  • SATA II NCQ X K8N Neo 4 Platinum ... whats happening??

    Hey everybody!
    So, im having big problems here since i've bought a Samsung SP2004C 200Gb Sata II NCQ and tries to install Windows XP on it... the deal is: I can normally install Windows XP (and at F6 screen, install the SATA driver).. so after about 2 weeks, my pc starts to get very slow and randomly crash corrupting files on Windows (like the last time, it was rundll32.dll... but this doens't mean it will be always this file, it can be another one) and so the Windows don't boot or softwares don't load (when Windows boot)...
    When this happens, i'm forced to reinstall Windows... and so it works really fine for 2 week and sometime every problem is back again... I'm really tired of this problem, this is the 3rd time i format my system... and I use my station for fun and work, so you can imagine the lot of work is formatting this pc lol... it takes about 5 or 6 hours to configure all softwares and everything else... heheehe ... but the deal is, in MSI web site, it says that nforce 4 (the native SATA controller) have problems with SATA NCQ tecnologies .... and so they say to disabled it... but... how can i disabled ?? can someone help me?? I need an answer before it starts to crash again lol!!! ...
    you can see what MSI says here: Click Here!
    and also, trying to not have the same problem, I tried to install this HD in the Silicon Controller (the 3rd part controller) and when I'm in the installation screen (Windows), it says that can't find my HD!! (ok! I configured the jumpers to 1.5gb)... I'm trying to put it in the SATA5/SATA6.. what's happening??
    I'm really desperated!
    Can someone help me??? 
    regard to everybody!
    Eduardo Wagner

    Quote from: Bas on 19-March-07, 05:27:20
    Sorry again....but it won't find your HD on that controller unless you loaded the floppy WITH the drivers for that controller during the CDrom-install-boot....
    Windows does NOT know about that controller or HD unless you load the drivers during install.
    Either you don't explain it all correctly, or I miss something here...
    In the very early stage of the booting of the CDrom it asks you to press F6 to load drivers, mostly talking about SCSI drivers but those drivers simular an need to be loaded at that stage.
    If you didn't load them, they HD isn't found.
    If you did all this and it doesn't show the HD, maybe the cable is wrong or try a differend brand HD on it.
    Sorry, I get puzzled by the explenation you give.
    Yes, you are right Bas.... sorry, my english is a lil bit rubish, never did an english course before hehehe... back to our convo, I said it really wrong.. its like you said..
    "In the very early stage of the booting of the CDrom it asks you to press F6 to load drivers, mostly talking about SCSI drivers but those drivers simular an need to be loaded at that stage."
    thats what I'm doing... loading the SATA driver with floppy (then appears "SiS Sata Driver XP/2000" can't remember exactly) in the F6 screen and in the partition screen the HD can't be found... i was using SATA5 and later SATA6... is there any problem with those ports? 
    best regards bas! 
    edit.: btw... I was reading again your post and realised what you said:
    If you did all this and it doesn't show the HD, maybe the cable is wrong or try a differend brand HD on it.
    The controller identifies the HD in the "after post screen"... so how can this be possible when the cable is wrong? 

  • NForce4 (Neo4) & Maxtor DiamondMax 10 SATA II NCQ compatible?

    I've stumbled across a few forum threads here where people identified having trouble with the Maxtor DiamondMax 10, 300GB 16MB cache SATA II NCQ drives (6B300S0) with MSI nForce motherboards. Seemed that it may have been that the mobos weren't compatible with SATA II or NCQ. But the threads all went cold without resolution, or further complaints. 
    Was this issue fixed with a BIOS upgrade? Does it affect all nForce motherboards, or just the Neo2? Has anyone tried a SATA II drive with NCQ, or more specifically a Maxtor 6B300S0 or 6B250S0, with any of the MSI Neo4 motherboards?
    As my sig shows, I'm considering using a SINGLE drive, not a RAID configuration. My K8N Neo4 Platinum/SLI should be here in a few days.
    Thanks

    Well, since I was so critical of MSI tech support, I feel that it's only right that I give credit where credit is due.
    I received my MSI K8N Neo4 Platinum SLI today from ZipZoomFly.com. The motherboard was missing the D Bracket 2 & the external dual-port Firewire PCI bracket. I called ZipZoomFly over 3 hours ago to report this, & was told I'd hear back within an hour concerning how they'd handle this. Still no word from them.
    I called MSI tech support & they confirmed that I should have received both the D Bracket 2 & the external dual-port Firewire PCI bracket. The MSI tech took my name & address & said that he'd FedEx them to me. Wow, that's great! 
    I also asked the MSI tech about support of the new AMD Athlon 64 Venice E3 core processors. He said that MSI Taiwan is currently testing the Venice core processors to evaluate their compatibility with MSI motherboards, & will issue BIOS updates as necessary. He told me to watch the MSI BIOS update web page.
    I read a review at xbitlabs.com that stated that the Venice core processor (3800+ model was tested) worked with the K8N Neo2 Platinum & K8N Neo4 Platinum SLI, with only a few issues that should be fixed with BIOS updates.  PC Perspective reviewed the 3200+ Venice core processor & reached 2.8 GHz on the standard 1.4v, with standard AMD air cooling! That's impressive! I want one!!!
    So today's call to MSI US tech support was all positive.

  • My 3rd iphone. 3GS I did not buy from an apple store, how do I register this serial number with my apple account? it is already sync to it and will preform every function except email to my home computer. It says apple ID disabled

    My 3rd iphone is a 3GS. I did not buy this one from the apple store, how do I register this serial number with my apple account? it is already sync'd and it and will preform every function except email to my home computer. It says apple ID disabled, also will not update my apps, same promt apple id disabled.
    anyone know where I can go to register this phone? Thanks

    https://register.apple.com

  • I have bought Adobe Photoshop Elements 13 and I try to get my serial number with my activation ID but I get a message that my ID is not good. What can I do?

    Where can I get a serial number with my activation ID if it dosen't work on the ADOBE site?

    Well, for your ID just use the ID and password you're using here. If you meant your redemption code rather than your ID, try this:
    Redemption Code Help

  • Need formula to take text from one cell, add that to a serial number with leading zeros

    I'm trying to create a spreasdheet cell that simplifies creating videotape Numbers from a job name in cell and appends a serial number with leading zeros, and that would survive an export to EXCEL.
    The result would look like
     A Column
    Job Name
    B ColumnTape #
    Formula needed for B
    ClientName-TapeType-
    ClientName-TapeType-001
    =
    ClientName-TapeType-
    ClientName-TapeType-002
    =
    I've tried using a custom cell format that had the text in front of the (Integer) drag and drop, with three integers and leading zeros.
    That worked, but requires recreating the custom cell format for each client and tape type.
    So, I've used the formula =A2& in order to play around with different things, but haven't hit on something that adjusts for increased numbers and retains the leading zeros.
    I don't mind doing a starter for the first row and then adding +1 in the formulas for the rows below.
    I've done that using the custom cell formats for the first B cell and then using =Bx+1 in the following cells.  It works, but I'm hoping to find something simpler or that can be copied and pasted in multiple rows on one paste.
    Thanks in advance.
    Suggestions much appreciated!
    Ted

    Ted,
    This expression in B will give you the pattern I believe you are looking for:
    =A&RIGHT("00"&ROW()-1, 3)
    Here's a screen shot...
    Jerry

  • Hi,  I lost my serial number for PS Elements11 following computer crash. Os is W7. I have the cd installation disc but there is no serial number with it or in the envelope  ..  How can I obtain the serial number please?     Thanks

    I lost my seriel number for PS Elements 11 following computer crash. Os is W7
    Peter Jones Aug 27, 2014 5:36 AM   
    Hi,
    I lost my serial number for PS Elements 11 following computer crash. Os is W7. I have the cd installation disc but there is no serial number with it or in the envelope
    How can I obtain the serial number please?
    Thanks

    If you registered the software you should be able to find the serial number thru your Adobe account online.
    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • I'm trying to associate my iphone serial num with my apple profile, but the system say that the number is not good !

    I'm trying to associate my iphone serial num with my apple profile, but the system say that the number is not good !

    it is correct in this link;
    but in the https://supportprofile.apple.com/PramAddRegisterProduct.do
    the message indicate the (same) number is not valide

  • Adobe wont update my CS 5, it says i have the wrong serial number.  I have 2 serial numbers with my account, how do i switch the serial number in CS 5 to the other number?

    Adobe wont update my CS 5, it says i have the wrong serial number.  I have 2 serial numbers with my account, how do i switch the serial number in CS 5 to the other number?

    David,
    To switch, I am afraid you will have to reinstall using the other one.
    But that should hardly be necessary.
    If you can find no way, you may try a chat here,
    Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html
    or Adobe Support (phone) here,
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

  • Migration from Serial polling to Serial queue with event handler

    Hi, I am trying to migrate from classical serial polling communications to serial queue with "event handler" for the buttons pressed by the user. I have placed four while loops, one for the event handler, a second one for serial reading, a third one for serial writing (depending on what button was pressed) and the last one for processing what was read from the serial reading while loop, via a queue.
    My attached device reads the signals from 8 sensor ( 4 temperature and another 4 temperature plus humidity in the same sensor ) and send them via serial to Lavbiew.
    First of all, only once just after running the LV program, I must turn on my attached device with an ON command plus a carriage return after that the device will respond with the number of sensors plugged to it, disabling the corresponding buttons in the front panel. Then labview must wait until I pressed Acquire Button (event handler) and send a CF command plus what sensors to acquire plus a carriage return, then the device will respond continuously to labview with the sensor readings until I press the stop button (event handler), there is also another button to exit the program, also with event handler.
    I am having problems using the event handler and the queues because I am new using these structures, I have looked at  the LV examples but there is nothing concrete on using serial with event handler and queue.
    Take a look at my VI and you will soon notice what kind of problems I am having, any suggestions will welcome.
    Thank's in advance.
    Regards.
    Attachments:
    serial queue.zip ‏76 KB

    Hi Luisete,
    Maybe the problem arise because you are En- and DeQueue in parallel. You do a lot of things in parallel, that is nice if you are sure that one loop doesn't have to wait for another loop. Make sure you don't dequeue before enqueue.
    Hope this helps
    I never knew that the standard error cluster output could be wired directly to the loop control of a while loop.
    First time I see this

  • Link Serial Number With Batch Number

    Hi Gurus,
    I need to link the material serial number with the batch number.
    This link needs to be created in advance of the GRN.
    Then at the time of goods receipt the processor can select the serial numbers relevent to specific batch number.
    Please advice.
    Thanks in advance.
    NalindaR

    while config the serial number profile check if batch number field is there

  • I BOUGHT LIGHTROOM 5 IN LAREDO TX AND I TRIED TO GET IN MONTERREY MEXICO THE SERIAL NUMBER WITH THE REDEMPTION CODE BUT APPEARS AN ERROR. MY PC IS WINDOWS 8. COULD SOMEBODY HELP ME?

    I BOUGHT LIGHTROOM 5 IN BEST BUY LAREDO TX AND I TRIED TO GET IN MONTERREY MEXICO THE SERIAL NUMER WITH THE REDEMPTION CODE FROM THE BOX, BUT APPEARS AN ERROR. MY PC IS WINDOWS 8, COULD SOMEBODY HELP ME??

    I don't know that you can purchase Adobe software in the US for installing and using outside of the US.
    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Serializing text with component

    (Serializing text with component)
    The text is just ascii text, but it could be a considerable size (like 64k). The purpose would be to serialize, and then de-serialze all of this custom information I need for that component (and some other stuff). An example would be to save a list of names with my 'Name' component.
    I don't see any evidence that it is possible...
    Thanks,
    JR

    Well, imagine if we had to do serialization in this
    manner (i.e. manually). Not a pretty picture in my
    opnion...sure, that's why the API exists... don't take it the other way round and apply serialization to every single piece of data
    why do you think that serialization is easier btw ? here's the non-serialized version :
    Writer writer = new FileWriter(filename);
    writer.write(value); // I assume your text is available in a String named 'value'
    writer.close();and here it is with serialization :
    JButton container = new JButton(value);
    FileOutputStream fos = new FileOutputStream(filename);
    ObjectOutputStream outputStream = new ObjectOutputStream(fos);
    outputStream.writeObject(container);
    outputStream.close();Serialization helps you serialize complex objects (like graphical components) easily. It's a relatively heavy mechanism (compared to regular file writing) and shouldn't be used as a standard way of writing text to a file.

  • Can i get my iphone 4 serial number with the IMEI number?

    My iphone is missing/stolen (probably stolen).  I'm trying to use the find my iphone app but need to add my iphone to my apple profile because it's a new phone and I hadn't done it yet.  I have the IMEI number but I don't have the serial number and I guess that is what apple wants because it keeps saying the number I give them is not valid.  Does anyone know if there is a why of cross referencing so that with my IMEI number I can get the serial number? OR is there anyway other than that to add my phone to my mobile me profile?

    With iTunes on your computer assuming you have synced your iPhone with iTunes and/or backed the iPhone up with iTunes.
    http://support.apple.com/kb/ht4061
    You shouldn't need the serial number with taking it to an Apple Store unless it has changed. Your cell phone number should be enough.

  • Include batch/serial numbers with Count Sheets

    When performing a cycle count for items that are managed by batch or serial numbers, it is necessary to record the count by batch or serial number, since discrepancies must be entered with this information.  There should be an option or alternative PLD layout that would include a list of batches or serial numbers with quantity > 0 in the warehouse.  Users could then enter the count for each batch, or check off the serial numbers that are counted.

    Hi Marcia,
    I just made a query to pull that data.  I had the item and item group table in there because we were filtering by item group.
    SELECT
      T0.[ItemCode]
      ,T0.[ItemName]
      ,T0.[BatchNum]
      ,T2.[ItmsGrpNam]
      ,T0.[Quantity]
      ,NULL as 'Counted'
    FROM
      OIBT T0 
      INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode
      INNER JOIN OITB T2 ON T1.ItmsGrpCod = T2.ItmsGrpCod
    WHERE
      T0.[Quantity] > '0'
    It will give you the list of all batches with quantities to count.  Then you can make a PLD query layout and print that.  Problem is you have to aggregate the items into a total by item code anyways for doing the counting, but then you need to have the batch data when posting.
    Hope that helps,
    Mike

Maybe you are looking for