Serial VISA - without installing all drivers

Dear friends, I want to build my serial (RS-232) application with serial VISA but I do not want to install the softaware VISA, because then I would  have all the files resulting after an installation of VISA, because I need to run my app. in a PC where LabVIEW is not installed. Also I do no like to install NI MAX. 
Regards:
Kike

Answered here. If you want to develop with VISA, there is no choice except to install the VISA run-time. The serial only run-time is much smaller than the full VISA or run-time.

Similar Messages

  • How to download and install all drivers on my laptop..plz help

    how to download and install all drivers  on my laptop..plz helpthe pre installed OS was ubuntu but now i havve installed Windows 7 64 bit...i m not able to use internet through ethernet,my wifi is not working..and many such problems related to drivers.

    How did you post this? Download the drivers to a memory stick. See Paul_Tikannen's post here: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/windows-7-drivers-for-hp-1000-1336TU-notebook/td-p/4852732

  • Installing 10.4 upgrade without installing ALL previous versions first

    Just replaced the hard drive in my iMac. When I tried to reinstall 10.4 I was prompted that it was an upgrade and I would have to install 10.3 first. So I put in 10.3 and got the same message looking for 10.2.
    I do have all the previous OS disks but am wondering if there is a quicker way to install 10.4 without first installing all the previous versions first.
    Thanks

    I don't know if this could help, but in the past it solved some installation problems for me: reset the PRAM, it is innocuous anyway. To do it you'll need to reboot while pressing cmdopt+"P""R", then you'll hear a new dong sound, keep'em pressd for a new dong and so up to a third one, then release and try 10.4 install again.
    PS: If your imac is the latest G5 you'll not able to install 10.4 with the original tiger disks since its minimun bootable OS is 10.4.2. You'll need the restoring disk then.

  • Install all drivers + vNIC/vHBA configuration on W2k8R2 on B200M3 server

    Hi everybody,
    I am a network engineer and rather a newbe on system…
    I have just installed a w2k8R2 64bit on a B200M3 in our new UCS architecture (local storage; W2k8 as bare metal OS)
    3 questions:
    What is the best way to install all W2k8R2 drivers for this B200M3 server ? At present, I have many unknown hardware; I have just install manually the drivers for VIC 1240 by using ucs-bxxx-drivers.2.0.3b.iso or/and ucs-bxxx-utils-windows.2.0.3.iso. I looked for a exe to apply all W2k8R2 drivers for B200M3 but I could not find it.
    The Service Profile of this server allowed 3 vlans : 1 natif + 2 tagged. In the properties of the network card under W2k8, I could not have any option to active the tagged. How can we do that?
    The Service Profile of this server has 2 vHBA. How can i configurate the failover between fabricA and FabricB
    Many thanks in advance.
    Nicolas.

    Hello Nicolas,
    You are on the right track. Mount the ucs-bxxx-drivers.2.0.3b.iso image via vmedia and browse it from Windows OS.
    1) Intel Chipset
    2) FNIC ( HBA )
    3) ENIC ( Network )
    Currently, there is no one-click option to install necessary drivers based on server model. The following link helps you to navigate the ISO folder
    http://www.cisco.com/en/US/docs/unified_computing/ucs/os-install-guides/windows/BSERIES-WINDOWS_appendix_0100.html
    If you have many such installations to do, then you might want to create custom W2K8 image with necessary drivers built into it.
    2) VLAN tagging
    I assume you have single vNIC that allows 3 VLANs and want the OS to tag the traffic. I do not see VLAN tagging in ENIC driver properties. I will find more information on it.
    If not, you can create three nics and UCS vNIC will tag the traffic as defined in the service profile.
    3) HBA failover is handled by Multipath failover driver in OS( MPIO ) . Depending upon the storage array, you can install appropriate MPIO driver.
    HTH
    Padma

  • Boot camp XP, does OSX CD install all drivers?

    When i load the boot camp drivers off the OSX CD after first booting into windows, does that take care of everything? or should i go out and download updated chipset, wireless nic, etc drivers from somewhere to get the most current?

    Hi,
    the BootCamp Drivers on the OSX disc should have everything you need.
    However, depending on the version (and oldness) of your OSX DVD you might wanna run the "Apple Software Update" utility while in Windows after installing the drivers from the OSX DVD.
    There could be minor updates available.
    Regards
    Stefan

  • New T400 but nothing much works... Installed all drivers but...

    It is starting to feel a bit strange. New install Vista Business and Office 2007.
    Downloaded every last bit of drivers from Lenovo but nothing but crap.
    * Wireless card is not seen by system (switch is turned on)
    * Power Management does not work, only on and off...
    * Fingerprint reader is not seen by system
    * ThinkVantage-button does not work at all
    * No Fn-keys show on-screen (battery, sleep, wireless etc)
    I get about four-five error messages after booting and logging in, all from Display (default), Communication-driver.
    Yesterday I called Sweden, closed for Lenovo calls, referred to USA who said "Sorry, no support, must call Sweden...." NOT COOL AT ALL LENOVO!!!
    Has anyone got one of these T400 to actually work?? Will consider return if not fixed this week..
    Please guide me if you know what's wrong!
    Regards,
    Markus

    Do not panic:
    http://www-307.ibm.com/pc/support/site.wss/MIGR-70439.html

  • Running a labview installer without installing drivers

    Ouch. I have to install multiple LabView programs onto the same machine and they were all compiled with different versions. I don't have the luxury of rebuilding them. When I try installing some of them, the program won't let me install because newer drivers are already installed on the machine. Is there a way of running an installer to install the program without installing the drivers?
    Solved!
    Go to Solution.

    The folder where the installer was placed into should have a bunch of folder in the "bin" folder all starting with "p". These contain the various installers that are run. The actual installer for your executable should be in there somewhere, so you could try running it directly.

  • [GE70 PC2 APACHE] - 2 Devices left in Device manager but all drivers installed

    After I installed all the drivers that I found for this Model (GE70 2PC APACHE) I still have 2 things left in my Device manager. But I have no idea whats missing. And Windows cant find any fitting driver. Anyone know maybe what it could be ?
    Installed Drivers for Soundcard, Nvidia, Intel Display Driver, Touchpad, Card Reader, Bluetooth, Wifi, LAN. Whats left that could be those 2 devices in Device Manager ?
    Cheers
    Wolfseye

    Hi,
    I i don't know what drivers are missing if you have installed all drivers.
    What you can do is, install this software " Driver Booster ". This software can detect the missing drivers and install them.
    Cheers

  • Installing chipset drivers vfrom WDS

    Hi there. I have some computers and WDS server installed. I imported all drivers from vendor's disk to WDS. VGA, LAN, Audio drivers was installed from WDS, but OS alaways install default drivers for chipset drivers and SATA/ACHI drivers, not from WDS.
    How to make OS to install all drivers from WDS? 

    It's probably because of the driver rankning.
    Read more about it here:
    http://technet.microsoft.com/en-us/library/hh825697.aspx#DriverRanking

  • Suggestions to updating all drivers? New Owner (used GT70 0NC)

    Hello,
    Now that this XenonBen already helped me to find the right MSI page to download drivers, the question is, do you suggest to download and install all drivers, BIOS, Firmware, etc. to make sure I have the latest drivers installed? I do not know how to find out if the drivers, etc. that I have are updated or not, or if there is any utility out there that can check if new drivers are available.
    I will appreciate any recommendation from the experts.
    Thank you.
    Luis.

    Quote from: Luis Alberto on 21-January-14, 07:19:49
    Thank you for the suggestion darkhawk
     .....I was going to update everything including BIOS/EC....It was good to ask first.
    I really appreciate the help that I am getting in this forum. Hopefully, with time and experience, I will be able to help others as well.
    Luis
    No Problem. We're here to help, if we can. I try to keep the notebook forum taken care of. Others do other areas of the forums.

  • How i install Windows 8 on my iMac whit, How i install Windows 8 on my iMac with all drivers working well?

    Hi,
    I just want to know if bootcamp allready supports windows 8 with all drivers working like magic mouse gestures, the optic drive, sd card, USB ports, bluetooth al patches are working fine and if all is working ok how to intall, if is a normal bootcamp installation or requires other procedure
    Thank you

    The Windows 7 drivers worked perfectly for me on my Early-2011 Core i5 MBP.
    It's not officially supported by Apple yet as it's pre-release software, but you can install it without any problems.

  • Epson Stylus Pro 7700 will not work after installing Mountain Lion, I have update all drivers and firmware

    This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?

    Checked RoaringApps App Compatibility Table.  These are apps not drivers but.. 
    All I see listed is:
    - Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
    - Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
    - Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
    http://roaringapps.com/apps:table/tags/_e/index_tags/_e
    On the Epson Website.  Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
    Drivers:
    - Printer Driver v8.63
    Utilities:
    - Remote Panel 2 Utility v1.30
    - Uninstall Center v1.1.0
    Firmware:
    - Firmware Update version KND14BA
    Epson Stylus Pro 7700 Printer - Drivers & Downloads
    Did you download and install all of these from the Epson website?

  • HT1386 The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

    The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

    If the answer to the above question is "yes", FIRST, set up a backup of your new computer before you do anything else so the next time your computer breaks you will not be in the same situation. Backup solutions are numerous and inexpensive, and there is absolutely no excuse in the Third Millennium not to have one.
    Then see this tip: https://discussions.apple.com/docs/DOC-3141

  • HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

    There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
    I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off.  How can I solve this problem please?

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • My computer was reimaged and iTunes was deleted, now when I try to sync my ipad it says it is synced with another library?  How do I sync with the newly installed iTunes without losing all of my data on my ipad?

    My computer was reimaged and iTunes was deleted, now when I try to sync my ipad it says it is synced with another library?  How do I sync with the newly installed iTunes without losing all of my data on my ipad?

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

Maybe you are looking for

  • Open multiple indd docs through SDK

    Hi guys How can I open multiple indesign documents found in a folder chosen through a folder chooser? I need to open each indesign doc in that folder and do some modification on each. Here is what I have already written. Now how do I proceed please S

  • Damsel In Distress: Embedding Sound Clips in Fillable Forms

    I embedded sounds (WAV files) in my professional 7.0 pdf with both the sound tool and the button tool. I also customized these with my own icon (JPG and PNG images). PROBLEM: once I open my pdf as a fillable form to add comment boxes, all the sound c

  • Audigy 2 ZS Platinum Pro Microphone Probs

    Hello, I have had a frustrating time getting my microphone to work consistently using this card and Windows 7 x64. Here is what is happening: Usually when I first boot up, my microphone will not work with Ventrilo or Windows Sound Recorder (no bars i

  • Substitution of account(HKONT) when posting in MIGO/MIRO

    Issue: Need to change account(HKONT) when posting in MIGO/MIRO example:       HKONT(GL Account)       KTOSL(Transaction type)                1000000001              XX1                1000000002              XX2                1000000003             

  • "not a valid Win32 application" message when trying to install iTunes 7.0

    I have downloaded the new iTunes 7.0 setup file. When I click on the icon on my desktop, I get the message, " C:____\iTunesSetup.exe is not a valid Win32 application". This problem doesn't seem to be specifically addressed in the troubleshooting sugg