Serialized Shipping Container Codes - SSCC use for STO

Does anyone used labels with Serialized Shipping Container Codes [SSCC] to be used for intercompany  STO's, in order to use scanning of SSCC in receiving plant WM to automate the warehouse process.
Did you have to use EDI / ASN's in order to accomplish this? or how did you do it?
My client wants to receive and use the same label [on the pallet in the receiving plant WM, since they will be full pallets going to SU managed Storage types.
Did you accomplish the same any other way. Please Help/explain.  Regards!

Hello again,
ok, meanwhile I have found all the answers myself:
- Several iDoc-types can be used, e.g. DELVRY05.
- The Idoc-field to be used is EXIDV in segment E1EDL37.
- The field in the delivery is EXIDV in table VEKP.
Just in case someone needs this...

Similar Messages

  • How do I go for SSCC(Serial Shipping Container Code) thorough PI sheet

    Hi Gurus,
    How do I go for SSCC(Serial Shipping Container Code) thorough PI sheet.
    Regards,
    Amol Kale

    Hi,
    can you please explain your business case in more details?
    Do you want to enter SSCC codes during PI Sheet maintenance (by user, via bar code scanner etc.)?
    Greetings
    Uwe

  • What is SSCC(Serial Shipping Container Code)?

    Hi Gurus,
    Can someone help me understand what is SSCC(Serial Shipping Container Code). We are to use the same in Process Industries.
    Regards,
    Amol Kale

    Hi Amol,
    The Serial Shipping Container Code (Handling-Unit-Code) is an 18-digit number used to identify logistics units
    (standardized international despatch-code EAN-128)
    This code is used for tracking and tracing in electronic commerce transactions in the supply chain.
    This reference can be added to the logistical units as a barcode.
    The SSCC is used in standard ERP applications and Warehouse Management Systems (WMS), of both suppliers and customers. These applications will exchange the SSCC codes in their EDI-communication.
    Upon goodsreceipt of a pallet in the warehouse the barcodes will be scanned and the WMS will display the pallet item-content.
    For further reference:
    http://help.sap.com/saphelp_em70/helpdata/en/d6/954841861af323e10000000a155106/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/9e/56c8ecaa83d311ae690060b03c9bbe/content.htm
    http://www.gs1.org/barcodes/technical/idkeys/sscc
    http://mdn.morovia.com/kb/Serial-Shipping-Container-Code-SSCC18-10601.html

  • What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO gnrly

    Hi all,
    What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    Help will be surely rewarded.
    Thanks and Regards,
    Creasy

    > What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
    > Help will be surely rewarded.
    &********************** Please read "the rules" if found usefull... ************************&
    Cheers,
    Julius

  • What mobile code is used for LiveCycle ES4?

    What mobile code is used for LiveCycle ES4?

    Hi
    SE84 - OBJECT NAVIGATOR
    The Object Navigator is a central point of entry into the ABAP Workbench. It is the successor of the Repository Browser, and you can access it using transaction SE80,SE84 & SE15
    To help you in your work, the Object Navigator provides a comprehensive set of navigation functions.
    Reward Me Points
    By
    Pari

  • Which T code is used for entring the pricing condition P101 for purchase or

    which T code is used for entring the pricing condition P101 for purchase order

    Hi jitendra ,
    if you are looking for T-codes use:
    SE16 and scan table TSTCT.
    Regards Mario

  • What are the algorithem and container to be used for this problem?

    Say I have a class with the following properties:
    groupMonth //String (jan,feb,mar�)
    accumulatedLasyYear //double
    accumulatedThisYear //double
    What will be the best container/algorithm to use for objects from the class above so I can have them sorted by month (I know it�s a string) AND GROUP the months together (and the accumulated as well)
    Example:
    Jan 4 8
    Feb 2 3
    Mar 5 2
    Jan 3 5
    Feb 4 2
    Mar 9 3
    The output should be:
    Jan 7 13 //(4+3, 8+5)
    Feb 6 5
    Mar 14 5
    Thanks for any thought�

    I'd suggest a java.util.Map<String, Set<WhateverClassYouveDefined>>. The keys are the year, the values are Sets containing all objects of that year. Iterate through your list of objects and group them into the right set using the map.
    Then I'd suggest looping through the keys to get each month's worth. Since you know what all the keys will be in advance, and there's only twelve of them, create an array of the twelve month strings. Loop through that array, and for each value grab the corresponding Set from the map.
    Then for each set you get, iterate through its contents, get the values, and add them.
    Then just print the month and the sums of values from the set, and go on to the next month.

  • What Message type and Process Code to use for Purchase Order Change in 4.6C

    I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
    I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
    I can not imagine this functionality does not exist in 4.6C.
    Any suggestions for my problem are welcome.

    Hello,
    In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
    Function module    BAPI_IDOC_INPUT1
    Idoc Type              PORDCH01
    Message Type      PORDCH
    So check carefully the following OSS notes:
      [Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
    [ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
    Regards,
    Andrea
    Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

  • Variant config can be used for STO orders

    If the object dependecy assigned in super BOM , when we create a sale order for config material ( header material ) the characteristics field will appear based on that we can select accordingly
    The similar concept can be applicable for STO orders also or not
    During creation of STO for the supplying plant whether the characteristics field will appear or not

    There is no need for the Characteristic value entry screen pop-up on ur STO. The STO will be a result of some Order, where the pop-up would already have been configured using the char's.
    Your STO is just the vehicle to replenish the demand against an order.
    Let me know if you have more questions
    cheers

  • Transaction code against used for BADI BAPI Details

    Hi Gurus,
    How to find in Particular transaction Active BAPI and BADI  used Details.
    Pls, Advise me.
    Regards,
    Jeevan.

    Hi Jeevan,
    Your question is not clear. Please elaborate more on the requirement. As far as I understand BAPI are independent of any transaction and those are mainly used for communication between SAP and Non-SAP system.
    BADI's are transaction dependent. You can use SE18/19 to find out active implementation for BADI.
    Thanks,
    Augustin.

  • Urgent pls ! Error during Container code generation using weblogic.ejbc

    HI all,
    Iam using weblogic6.1 and EJB 2.0. I have to communicate session and entity ejb's and iam using local interfaces for entity beans and access the entity beans thru session ejb's. After creating my programs and jar files, when i use java weblogic.ejbc code.jar Containercode.jar, i get the following error....
    --------- Error -------------
    C:\Sathish\Ejb\wl6.1\LocalInterfaces\Code\ejbcgen\CodeBean_tvm2r0_ELOImpl.java:34
    0: cannot resolve symbol
    symbol : constructor EJBException (java.lang.String,java.lang.Exception)
    location: class javax.ejb.EJBException
    throw new javax.ejb.EJBException("Unexpected exception in " +
    ^
    1 errors
    Exec failed .. exiting
    Can anyone say why this error is occuring......
    regards
    sathish

    In J2EE 1.3, EJBException added a third constructor of the form:
    EJBException(java.lang.String, java.lang.Exception)
    WebLogic contains a file called j2ee12.jar in the lib directory that when placed in front of the classpath, disables J2EE 1.3 features and replaces them with J2EE 1.2. In J2EE 1.2 this constructor did not exist.
    So in order to compile using J2EE 1.3 features, you must make sure that j2ee12.jar is not in your classpath.

  • Vendor code in EKKO for STO (Doc UB)

    Hi,
    I was checking the POs in table EKKO having document type UB i.e. STO within a company code between two plants.
    What I have observed is, there is supplying plant which is correct. But for some POs, it is showing plant code (which is my vendor code as a supplying plant) & for some POs it is not.
    And this is not for any specific plant. Say for Plant A, it is showing vendor code for one item & not showing for another item.
    In which case, vendor code gets updated in table EKKO & in which case , it is not?
    Regards,
    Piyush

    I asked about the order date.
    usually UB orders do not need vendors, as it is for intra company transfers only.
    however, if your plant starts to do stock transfers (NB) with plants belonging to another company code then a vendor master is needed. And this vendor gets assigned to a plant (in vendor master purchsing data view  via menu Extras)
    Once this assignment is made, any order will get the vendor number.
    Thats why I asked if all orders for the same supplying plant with vendor numbers  are younger than the order without vendor number.

  • Serial nos not to appear only for STO delivery

    Hi All,
    We have set up serialziation for Finished products. We have set up the serial no. profile so that serial no. entry is mandatory during delivery (only).
    Now the client doesnt want the serial nos. to appear for deliveries created for stock transfer process. 
    How can this be done?
    Can we set up some contol the the delivery type level?

    Hi,
    There is no such direct solution for control serial number assignment on basis of delivery,but I think still we can fulfill this requirement.
    In OIS2
    For serialization procedure maintain serial usage none or optional,so it will not be mandatory/required
    Then now incompleteness procedure is based on delivery document type and delivery document item
    So through this you can make it mandatory for required delivery delivery type/item and exclude it from STO
    Kapil

  • Would like help with treeset ,the codes that using for sorting, please ?

    hi every body. i faced a problem while writing this program, everything worked properly except this one. The program is related to Jframe and it asks the user to add three labels , three text field , one text area and three Jbuttons which are add sort and exit. i could deal with add and exit but sort, i couldn't do it properly because i don't know the codes that should be added in actionperfomed?
    These codes are :
    package gui;
    import javax.swing.SwingUtilities;
    import java.awt.BorderLayout;
    import javax.swing.JPanel;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import java.awt.Rectangle;
    import java.util.ArrayList;
    import javax.swing.JButton;
    import javax.swing.JTextField;
    import javax.swing.JTextArea;
    import sun.misc.Sort;
    import domain.Student;
    public class StudentFrame extends JFrame {
          * This method initializes btnAdd     
          * @return javax.swing.JButton     
         private JButton getBtnAdd() {
              if (btnAdd == null) {
                   btnAdd = new JButton();
                   btnAdd.setBounds(new Rectangle(13, 135, 59, 27));
                   btnAdd.setText("Add");
                   btnAdd.addActionListener(new java.awt.event.ActionListener() {
                        public void actionPerformed(java.awt.event.ActionEvent e) {
                        btnAddClicked(); // TODO Auto-generated Event stub actionPerformed()
              return btnAdd;
         protected void btnAddClicked() {
              // TODO Auto-generated method stub
         String name = txtName.getText();
         String id = txtID.getText();
         String age = txtAge.getText();
         Student s = new Student(name , id , age);
         txtArea.setText(String.valueOf(s ));
          * This method initializes btnSort     
          * @return javax.swing.JButton     
         private JButton getBtnSort() {
              if (btnSort == null) {
                   btnSort = new JButton();
                   btnSort.setBounds(new Rectangle(95, 136, 62, 25));
                   btnSort.setText("Sort");
                   btnSort.addActionListener(new java.awt.event.ActionListener() {
                        public void actionPerformed(java.awt.event.ActionEvent e) {
                             btnSortClicked(); // TODO Auto-generated Event stub actionPerformed()
              return btnSort;
         protected void btnSortClicked() {
              // TODO Auto-generated method stub
          * This method initializes btnExit     
          * @return javax.swing.JButton     
         private JButton getBtnExit() {
              if (btnExit == null) {
                   btnExit = new JButton();
                   btnExit.setBounds(new Rectangle(173, 134, 61, 23));
                   btnExit.setText("Exit");
                   btnExit.addActionListener(new java.awt.event.ActionListener() {
                        public void actionPerformed(java.awt.event.ActionEvent e) {
                             System.exit(0); // TODO Auto-generated Event stub actionPerformed()
              return btnExit;
          * This method initializes txtName     
          * @return javax.swing.JTextField     
         private JTextField getTxtName() {
              if (txtName == null) {
                   txtName = new JTextField();
                   txtName.setBounds(new Rectangle(79, 11, 60, 23));
              return txtName;
          * This method initializes txtID     
          * @return javax.swing.JTextField     
         private JTextField getTxtID() {
              if (txtID == null) {
                   txtID = new JTextField();
                   txtID.setBounds(new Rectangle(73, 55, 65, 26));
              return txtID;
          * This method initializes txtAge     
          * @return javax.swing.JTextField     
         private JTextField getTxtAge() {
              if (txtAge == null) {
                   txtAge = new JTextField();
                   txtAge.setBounds(new Rectangle(74, 96, 61, 24));
              return txtAge;
          * This method initializes txtArea     
          * @return javax.swing.JTextArea     
         private JTextArea getTxtArea() {
              if (txtArea == null) {
                   txtArea = new JTextArea();
                   txtArea.setBounds(new Rectangle(138, 5, 154, 128));
              return txtArea;
          * @param args
         public static void main(String[] args) {
              // TODO Auto-generated method stub
              SwingUtilities.invokeLater(new Runnable() {
                   public void run() {
                        StudentFrame thisClass = new StudentFrame();
                        thisClass.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                        thisClass.setVisible(true);
          * This is the default constructor
         public StudentFrame() {
              super();
              initialize();
          * This method initializes this
          * @return void
         private void initialize() {
              this.setSize(300, 200);
              this.setContentPane(getJContentPane());
              this.setTitle("JFrame");
              return jContentPane;
    }Edited by: hypocrisy on Apr 26, 2009 6:51 PM

    There are three actionPerformed in that program.One for add Jbutton , Sort , and Exit
    the codes that i have added for add button after action performed are
    String name = txtName.getText();
    String id = txtID.getText();
    String age = txtAge.getText();
    Student s = new Student ( name , id , age);
    System.out.println(s);
    the codes for Exit button to make it works properly was :
    System.out.println(0);
    But when i came to Sort Button and i tried to enter many codes but it didn't sort properly so would you like to help me with the right codes :)

  • How can same vendor code be used for domestic & import purchases?

    Hi
    We have a vendor who was initially supplying domestic goods but now we are also going to import goods from him.
    The Client doesnt want two separate vendor codes since they cannot get composite balance for domestic as well as for imports under one vendor code.
    I do understand we cannot have two different Reconcilliation accounts for one vendor code even and if we have just one reconcilliation account we cannot bifurcate domestic and foreign purchases.
    Please suggest.
    Regards
    Kapil

    Hi,
    It is not possible to change the reconciliation account (SpGL or alternative account) in MIRO transaction. Of course you can make some modifications in MIRO in order to open for changes field "G/L account" on "Details" screen, but if you should not foget to modify MR8M.
    Another alternative is to repost the MIRO documents (vendor oen items) to the alternative reconcilation account with FB01.
    Regards,
    Svetlin

Maybe you are looking for