Serialized stateless session and bmp entities

I have a situation in which I am doing a stateless session method
call, which does a Select specifying the primary keys of some bmp
entities in the where clause.
Are calls to the bmp entities EJBLoad() method serialized with respect
to calls to the session method?
Thank you in advance...
dAmOn

Hi, I just have some project with transactions for all methods. Now I have
to remove all transactions and check improvements. But it seems that there
no differences.
Alexander.
Rob Woollen wrote:
Alexander Shvets wrote:
Hi,
I have to make some research - how efficiently transaction support is
implemented in WebLogic application server. I need some source example
or statisticsabout such efficience.Transaction efficiency is a pretty broad area. What are you reall
interested in?
Personally I don't really buy the performance comparison between
transactional and non-transactional behavior. Transactions certainly
involve some overhead, but they provide a lot of benefits as well. If
your application requires transactional behavior, you will need to use
transactions. If you don't require transactions, then don't use them.
FWIW, WLS 6 provides a much better JTA engine than 5.1. You may wish to
investigate it as well.
-- Rob
For example, I have an Enterprise Bean and all methods are not ivolved
into taransactions. I have time1 for that. After that I make some
changes in deployment desacriptor, say I specify TX_REQUIRED for all
methods. I have time2.
My examples didn't show any differences between time1 and time2. That
means that my test is unappropriate or WebLogic is smart enough, or
WebLogic supports transactions all the time, even when you said not
support them.
Question 1: how to determine the real status of transaction with CMP?
The following example:
int status = context.getUserTransaction().getStatus();
works only for BMP.
In other words I need to have access to EJB container's managed
information. Maybe some public API for access to container?
Question 2: how to build adequate sample test for investigation of
WebLogic's transaction support.
Thanks in advance.
Alexander.

Similar Messages

Rollback a transaction in a session bean BMP?

The following code would work correctly if executed in a stateless session bean BMP?
InitialContext ic = new InitialContext();
javax.sql.DataSource dataSource = (javax.sql.DataSource) ic.lookup("java:comp/env/jdbc/OracleDS");
Connection conn = dataSource.getConnection();
conn.setAutoCommit(false);
Statement stmt = conn.createStatement("UPDATE TABLE_A SET NAME = 'Duke' WHERE ID = 7");
stmt.executeUpdate();
if (someCondition) {
conn.commit();
} else {
conn.rollback();
My question:
It�s possible to rollback a transaction using rollback() from Connection class in a stateless
session bean BMP?

Dear JDC member:
With EJB, you can gain the benefit of transactions without performing any transaction programming. That is, your enterprise beans never explicitly issue a begin, commit, or abort statement. The container performs it to you. But you have to tell the container how to do it. As you might know, the deploment descriptor is the place for it.
But nothing prevent you to do do programmatic transaction as you want.. For that case you have to know JTA (Java Transaction API) and more.
Suppose the transaction aborts, you have to throw an exception back to the client or try it again. The issue here is with stateless sesssion beans, there is no in-memory conversational state. You might think to implement javax.ejb.SessionSynchronization interface with your business methods....
You see there is a lot to know. You can take care of transactions in the client code, but it is a bad design.
You have to understand today most application servers (Websphere, Weblogic...) are designed to minimize those issues in order to make developers' tasks easier. The container takes care of transactions.
Be careful when you write stateless session beans BMP (BMP are for entiti beans)
Regards,
Armand Komenan

Stateless session's one method to call two bmp's create method

JSP calls one stateless session's one method and the method calls two bmps'
          create method.
          However, When the second bmp run the create operation, the exception
          happens.
          But the date that the first bmp insert is not rollbacked.
          How can I rollback all data, when the exception happens?


Use JSP actions.
<jsp:useBean id="shoppingCart" class="com.package.Cart" scope="session">
<jsp:setProperty name="shoppingCart" property="userName" value="Guest" />
</jsp:useBean>

How to use jta in toplink and stateless session bean EJB 3.0?

I have an application with techologies jsf,stateless session bean, adf, toplink
generated by toplink workbench.
In web side ı want to use two methods in stateless session bean which are updated
different tables. I call these methods in my page backing bean.
I also want to JTA in web side. My first methods is done correctly, but second method has an error. I wanto to rollback all transaction.
How can ı do that? with using JTA in Toplink...

Yuichi
Did you manage to solve this? I'm doing something similar and seeing the same problem, although they're up to 7.3 SP7.
Any help greatly appreciated.
Lewis

Hot delpoyment with TopLink and Stateless Session Beans

What is the recommended procedure for making hot deployment of Stateless session beans work with toplink in WLS 7.0sp1 and oc4j (9.0.3)
My current setup is as follows using WLS 7.0sp1:
A stateless session bean is accessing toplink enabled persistent java classes via the SessionManager. I'm currently using the class loader of the stateless session bean:
* Method in stateless session bean
* Return the TopLink Session (based on the wls stateless session bean demo)
public Server getSession() {
return (Server)SessionManager.getManager().getSession("ejb_sessionbean", this.getClass().getClassLoader());
Everything is working as such. My session bean can read and write the persistent java classes. However if I redeploy the stateless session bean jar file the toplink session is not reinitalized. This means that new settings in the session.xml are not used. I addition I get other errors.
I'm having toplink on the server classpath. The toplink enabled persistent classes are in the stateless session bean jar file.
Thanks
Henrik

What is the recommended procedure for making hot deployment of Stateless session beans work with toplink in WLS 7.0sp1 and oc4j (9.0.3)
Everything is working as such. My session bean can read and write the persistent java classes. However if I redeploy the stateless session bean jar file the toplink session is not reinitalized. This means that new settings in the session.xml are not used. I addition I get other errors.
I'm having toplink on the server classpath. The toplink enabled persistent classes are in the stateless session bean jar file.Henrik,
This is a recent post note I found on the same topic:
It all hinges on whether the TopLink ServerSession class has
been loaded by a classloader which is actually thrown away
during the hot deployment process. If this is the case, then
hot deployment causes the ServerSession to go out of scope
and finalize methods take care of logging it out properly.
If you deploy your TopLink Project on the Sytem class path then
it definately won't work. You'd have to restart the server every time.
But if the TopLink Project is deployed inside of an .ear file
and if you pass the correct ClassLoader to the
SessionManager.getSession( .... ) call then TopLink Session will
be re-started when you hot deploy the .earBased on this, the solution might be to deploy your EJBs in an ear file. Everything else looks OK. Can you try this and let us know?
Thanks,
Pete Farkas

WLS10 and Stateless Session Bean

I tried to create EJB3 application example.
1. Created Stateless Session Bean that implements Remote and Local interfaces:
Session Bean code:
package com.session;
import javax.ejb.Local;
import javax.ejb.Remote;
import javax.ejb.Stateless;
import javax.ejb.TransactionAttribute;
import javax.ejb.TransactionAttributeType;
@Stateless(mappedName="SessionBeanService")
@Remote(ISessionBeanRemote.class)
@Local(ISessionBeanLocal.class)
@TransactionAttribute(TransactionAttributeType.REQUIRED)
public class SessionBean implements ISessionBeanLocal,
ISessionBeanRemote
public String reply(){
return "MySessionBean - success !!!";
Remote Interface code :
package com.session;
public interface ISessionBeanRemote
public String reply();
Local Interface code:
package com.session;
public interface ISessionBeanLocal
public String reply();
application.xml:
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://java.sun.com/xml/ns/javaee"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
          http://java.sun.com/xml/ns/javaee/application_5.xsd"
     version="5">
     <display-name>EJB3 Sample Application</display-name>
     <module>
     <ejb>beans.jar</ejb>
     </module>
</application>
weblogic-application.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-application PUBLIC
     "-//BEA Systems, Inc.//DTD WebLogic Application 8.1.0//EN"
     "http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<weblogic-application>
          <classloader-structure>
               <module-ref>
                    <module-uri>beans.jar</module-uri>
               </module-ref>
          </classloader-structure>
</weblogic-application>
2. I packaged classes into EAR file and deployed to WLS10.
I didn't include any weblogic specific XML descriptors besides weblogic-application.jar.
My client code lookes as follows:
public void test(){
Context context = getMyServerContext();
// THIS JNDI NAME I SEE ON MY SERVER JNDI TREE
String jndiName = "sessionbeansbeans_jarSessionBean_ISessionBeanRemote";
Object obj;
obj = context.lookup(jndiName);
System.out.println(" obj class : " + obj.getClass().getName());
ISessionBeanRemote remote = (ISessionBeanRemote) PortableRemoteObject.narrow(
obj, ISessionBeanRemote.class );
String res = remote.reply();
System.out.println("res : "+res);
I get an Exception:
Exception occurred!
java.lang.ClassCastException: Cannot narrow remote object to com.session.ISessionBeanRemote
     at weblogic.iiop.PortableRemoteObjectDelegateImpl.narrow(PortableRemoteObjectDelegateImpl.java:242)
     at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:137)
     at ca.cgi.mvest.test.server.wms.GlFacadeTest.runTest(GlFacadeTest.java:91)
     at ca.cgi.mvest.test.server.wms.GlFacadeTest.<init>(GlFacadeTest.java:53)
     at ca.cgi.mvest.test.server.wms.GlFacadeTest.main(GlFacadeTest.java:151)
java.lang.ClassCastException: Cannot narrow remote object to com.session.ISessionBeanRemote
My server console have the following output:
Root cause of ServletException.java.lang.NoClassDefFoundError: com/session/SessionBean_7pp7ls_ISessionBeanRemot
eIntf
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
4)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericCla
ssLoader.java:338)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:291)
Truncated. see log file for complete stacktrace
Server logs a problem already on the line when I do lookup
on JNDI name even before narrow();
It looks like my EAR was missing something. But server never complained during deployment.
May be someone can direct me to a real sample of Weblogic10-ejb3.0 application, since examples that come with WLS 10 intallation combersome and do not follow
docmentation.
Thanks in advance for any suggestion.

Hello Freind
The main different b\w stateful and statless is that stateful maintain state of method conversation means it has record that which method call before this method
but in case of stateless conversation state does not saved second different we can say that create method in stateless having no parameter but statefull having parameter I think u can understand easily
With Best Regards
Rajesh Pandey
email :[email protected]
url :-- http://www.sixthquadrant.com
Mob :-- 9811903737
Delhi India

JCo 3.0 Server and Stateless Session Bean

Hello,
I use JCO (3.0) and I need to integrate SAP with JBoss.
The SAP Module is calling EJB-Services over JCo.
How would the architectur looks like?
I start with using an MBean to start and stob the native JCO-Server over JMX.
This still works.
But it doesn't work:
The Client(SAP) calls the JCoServer (works fine).
But the call off the EJB failed.
What solutions do you have to share?
Do you use a stateless session bean?
Best regards
Peter

The program ID should be with length 8 max

How to get stateful and stateless session bean in second jsp

I create stateful session bean in the first jsp, then how can I get the stateful session bean in the second jsp? I find that somebody store the bean in HttpSession.
If I store the stateful session bean in HttpSession, then I can get it in the second jsp. My problem is that I can store the stateless session bean in HttpSession, and get it in the second jsp. Then, both stateful and stateless can maintain the state in the second jsp. What is the difference between stateful and stateless session bean in this case ?
I understand the definition of stateful and stateless session bean, but I'm confuse how to use session bean. Can anyone provide sample jsp to show difference of stateful and stateless? How the stateful session bean can maintain the state for the client?

Greetings,
I create stateful session bean in the first jsp, then how can I get the stateful session bean in the
second jsp? I find that somebody store the bean in HttpSession.Which is the correct scope for sharing client-specific data when 'request' scope is insufficient.
If I store the stateful session bean in HttpSession, then I can get it in the second jsp. My problem is
that I can store the stateless session bean in HttpSession, and get it in the second jsp. Then, bothWhy is that a "problem"? Does your application not require the stateless bean to be shared? If so, then don't store the EJBObject reference in the session...
stateful and stateless can maintain the state in the second jsp. What is the difference betweenWhat do you mean by this exactly?..
stateful and stateless session bean in this case ?Statefulness of session beans is in regard to maintaining client state (er, in all cases). If your "stateless" bean is receiving information from the client (i.e. its caller) - either through a create method or a business method - and that information is available (retrievable from the bean) on subsequent method calls, then that bean is, in fact, stateful - regardless of how it is deployed.
I understand the definition of stateful and stateless session bean, but I'm confuse how to use
session bean.The correct question, it here seems, is "when" to use which type... Use a "stateful" bean when information about (from) the client (i.e. the caller) must be maintained across method calls of the bean. Use a "stateless" bean for general business methods that do not depend on "prior knowledge" of the client (i.e. the caller).
Can anyone provide sample jsp to show difference of stateful and stateless? How the statefulA "sample JSP" would yield nothing additional... The semantics of calling, using, and "persisting", bean references are always the same - regardless of type or class. However, the reason(s) for using one over the other depends entirely on the needs of your application.
session bean can maintain the state for the client?I recommend that you spend more time learning about EJBs generally. In particular, it seems you require more fundamental understanding of their scope and lifecycle. Refer to sections 4, 6, and 7 of the EJB 2.0 Specification.
Regards,
Tony "Vee Schade" Cook

Stateless session Bean - xml and ejb-jar.xml file ???

Dear Experts,
Stateless-session bean
For Creating an ear file
we need ejb-jar.xml and weblogic-ejb-jar.xml files
Is these files are already available
or we have to type these files ??
Advance Thanks
Rengaraj.R

My best advice: surrender to use an IDE.
You wonder sometimes at how much productivity (read as 'time') could be wasted by doing something that could be done automatically. For a learning experience or a once only exercise is fine but as a routine thing, not worth it.
Cheers

Stateless session beans and idle timeouts (weblogic 10.3.1)

Need clarification about stateless session beans and the idle-timeout-seconds setting.
Situation is this – we have a process that is timing out due to an API call to a very slow Authentication server.
I am trying to resolve this with a code change, but need to further other understand what the server is actually doing.
We have a session bean which calls another which is calling a util class that does all the work and returns the results back up to the initial session bean. I have left out the ejbName in these examples (it’s irrelevant here).
Example:
SessionBean1 // basically called just once a day
@Session(defaultTransaction = Constants.TransactionAttribute.SUPPORTS,
enableCallByReference = Constants.Bool.TRUE,
type = Session.SessionType.STATELESS,
transTimeoutSeconds = "0",
initialBeansInFreePool = "0",
maxBeansInFreePool = "20")
Methods
@RemoteMethod() public boolean getUserList(String adminGroup) {
Map usrList = getUserList(adminGroup);
Private Map getUserList(String adminGroup) {
     return SessionBean2.getUsers(adminGroup);
SessonBean2
@Session(defaultTransaction = Constants.TransactionAttribute.SUPPORTS,
enableCallByReference = Constants.Bool.TRUE,
type = Session.SessionType.STATELESS,
transTimeoutSeconds = "0",
initialBeansInFreePool = "3",
maxBeansInFreePool = "20")
Method
@RemoteMethod() public Map getUsers(String adminGroup) throws RemoteException {
return javaUtilClass.getUsers(adminGroup);
JavaUtilClass
Method
public Map getUsers(String adminGroup) throws RemoteException {
     // This is where the work happens, calling the Authentication server to get a complete
     // list of users for an admin group. When the user list is around 1500 entries, this can
     // take an hour. Did I mention this server is very slow? It’s about this threshold of 1500
     // that causes the timeout.
     return Map of users
First thought, just bump the idle-timeout-seconds setting for the session beans (from the default 600), but that would be a temporary solution until the user list grew larger.
Second thought, refactor the call to the Authentication Server API to get the user list in blocks of data (say 400 at a time) and decreasing the call/response time between the method getUsers and the API call. This would still occur in the JavaUtilClass, so I am unsure this would make a difference. The session beans would still be idle and subject to timeout, correct?
Would setting initialBeansInFreePool to 1 in SessionBean1 make any difference?
Or should I be looking at replicating the re-factored method from the JavaUtilClass in SessionBean1 where the user list is being used so that the API calls come back to it and keep it 'active'?
Thanks for any advice you could give me on this.

Hi
regarding timeouts, there are two ways:
1.- Changing the settings in the JTA WebLogic domain , called "Timeout Seconds". This will affect globally to all EJB deployed in the domain.
or
2.- Specified directly in the bean with a weblogic annotation, like this:
@TransactionTimeoutSeconds(value = 300)I hope this will help you.
Regards.
Felipe

Stateful session and stateless session

i want to use session pool, but in document being stateful session or stateless session are one of standards.
i do not understand the difference of them. who can tell me something about this?
thanks! and the session we commonly used is stateful or stateless ?

A stateful session is one that must maintain a state across requests; such as one that may require package states and the like. As such, it cannot be reused by other requests until it is completely finished.
On the other hand, a stateless session is one that performs somewhat like a singleton action (statement cache for example) which, upon completion, can be reused in the pool for any other request as it does not require the state to be maintained.
The most commonly used depends on the application, but I would say stateless is more common as it's used for performing small simple things (queries or small transactions) without requiring procedural-type processing overhead.
Not sure if that description really helps you though.

Difference between stateful and stateless session beans

can any body explain simply what is the difference between stateful and stateless session beans? also in what kind of situations we can use these.

Hi
This is the classificatio os Session Bean.
(1) Statfull
(2) Stateless
Stateful means u will persists the state of the object.
USESE:
In a Banking system u can use the statful session just for maintaing the
state.
(2) STATELESS: that's mean u do't want to persists any state of the object. that's mean a single Request is coming ,do the desire and give the output.
EX: A Credit Card System is the Example of Stateless.
May it will helpfull to understands u. if any need write here
saM

It's a WebService and a Stateless Session bean

Ok,
I have a Stateless Session Bean that have annotated as a @WebService.
@Stateless
@WebService
public class TravelAgentWSBean {
I only call it as a WebService, never as a StatelessSessionBean. Do I get the exact same transactional behaviour as if it was a Stateless Session Bean?
Thanks.

You could try it like this
<c:catch var="formatError">
<fmt:formatNumber value="${row.payment}" type="currency" currencySymbol="" var="pay"/>
</c:catch>
<c:if test="${not empty formatError}">
Error formatting value <c:out value="${row.payment}"/>
</c:if>

How many ejbCreate() can be in Session and Entity Bean???

Hi,
How many ejbCreate() method can be in a Session and Entity
Bean???
How many can be in Stateless and Stateful SessionBean???
How many can be in CMP and BMP SessionBean???
Thanks,
JavaCrazyLover

How many ejbCreate() method can be in a Session
ion and Entity
Bean???For Stateful Session Beans and Entity Beans, as many as you'd like.
Stateless Session beans can only have one, since their ejbCreate methods can not take any parameters.
>
>
How many can be in CMP and BMP SessionBean???If you mean CMT/BMT(Container-Managed transactions / Bean-Managed Transactions), then
the answer is the same. The create method requirements are independent of the transactional nature of the bean.
If you really mean CMP/BMP(Container-Managed Persistence / Bean-Managed Persistence) , it doesn't apply to session beans, only entity beans. However, even for entity beans, CMP vs. BMP has no bearing on the rules regarding # of create methods.
--ken
>
>
Thanks,
JavaCrazyLover

Trying to call stateless session bean from MDB

Folks,
Am working on RAD and WAS 8.
I have an MDB. And a stateless session bean (AOBean under EJB project).
While the listener listens to the messages from queue, it also tries to persist to db. I want to achieve this via a method of AOBean (through instantiating session bean or by injection).
I have been sucessful by invoking a method from AOBean class - that method just returns a string (without any objects being passed)
Problem:
I am getting IllegalStateException when I try to invoke a method of AOBean class, that has an object as a parameter
For eg:
MDB
@EJB(name="ejb/TransactionMgrAOBean", mappedName="ejb/TransactionMgrAOBean")
ITransactionMgrAO tranAO;
    public void onMessage(Message message) {
     TextMessage textMessage = (TextMessage) message;
     boolean status = false;
try {
   TransactionVO tranVO = getTransactionVO();//Here building the object to be passed to session bean
   String status1 = tranAO.getVersion(tranVO);
}catch(Exception e){
AOBean
@Stateless
@Remote({ ITransactionMgrAO.class })
@WebService
public class TransactionMgrAOBean {
public String getVersion(TransactionVO tranVO) throws Exception{
try{
//business logic
} catch(Exception e){
throw e;
return true;
TransactionVO implements Serializable has also inner static classes that are not Serializable.
EXCEPTION: At runtime we are getting exception saying that the inner classes are not serialized.
REASON why we are invoking session bean from MDB? We found that if we invoke any service from AOBean the transaction management was successful. We are using sessionContext.setRollBackonly when an exception occurs. Tranasactions are not rolled back when any db exception occurs if we invoke business logic methods from Model layer of another NON-EJB package.
Hope I have provided enough information!

My concret problem is that I want to call an ejb session contained in an ejb project from a session bean in a different web project. When I include the code in my web session bean I get the error adjunted:
- Code:
@EJB
private UserRemote userSessionBean;
- Error:
Exception Details: javax.naming.NameNotFoundException
pac.UserRemote#pac.UserRemote not found
Possible Source of Error:
Class Name: com.sun.enterprise.naming.TransientContext
File Name: TransientContext.java
Method Name: doLookup
Line Number: 216
Any suggestion?

Serialized stateless session and bmp entities

Similar Messages

Maybe you are looking for