Serialized v3 update and setuptables

i have 2 questions regarding LO extraction
<b>Question 1.</b>
while going thru the Lo cockpit step by step
i found there is a certain point where we select serialized v3 update for an initilize delta load. As per my knowledge, i read that serialised v3 is not used any more and is replaced by direct,queued and unserialized v3 update prcocess. if i am wrong where can we find the option to select serialized v3 update in LO cokcpit.
<b>Question 2</b>
when i tried to delete the setup table , the message shown Setup table deleted but i can see data for the same module in RSA3 after the process...hows is it possible.
i appreciate if anyone can reply me and points will be assigned for suitable answers..
thanks and regards
Abhilash Muraleedharan

Abhilash,
Follow the following steps
Q1. In transaction LBWG there is an option to change the V3 delta to "Direct Delta". This should solve the problem. Make sure that the Queue is empty or else you willl not be able to change
Q2. Make sure that you are selecting the right application hen you delete the data. Follow the follwing steps for filling the setup tables and seeing data in RSA3
Run T-code MCNB for 2LIS_03_BX setup
Run SETUP for 2LIS_03_BF AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
Thanks.

Similar Messages

Serialized V3 update

Hi Experts,
Can someone please explain to me the functions of serialized V3 update, and when can we use it?
Thank you in advance

Hi..
V3 Update Modes in LO Cockpit
Transaction data is collected in the R/3 update table
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
Records in transaction tables and in update tables
A periodically scheduled job transfers these postings into the BW delta queue
This BW Delta queue is read when a delta load is executed.
the above is summary ... further
search for this
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Message was edited by:
shiv

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was going to buy the one advertised on the website until I discovered it's only for students and teachers, which I am not. What should I do next as I need to use PDFs on a daily basis. Thanks! I would like to be able to download this and pay online. Possible? I currently have Adobe Acrobat XI Pro. I have a Windows 7 system. Please help!

As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly

I updated and now my serial number's no good. HELP!

I just ran Software Update and now my Pro Apps won't open without filling in the registration info. But it tells me my serial number is no good. How do I get them to work again?

It is quite possble that the "Final Cut Studio System ID" file has been corrupted, in which case you simply go to: Library/Application Support/Pro Apps and delete it. When you start one of the applications, enter the serial number again and you should be good.

Updates and serial number

After I download the updates FCS (Color), it ask for the serial. I put in the serial that I used to install it, but now it says the serial number is invalid.
Any thoughts?

Hi,
I have the same problem. After going through loads of forums did not find a solution that would work.
I recently updated to proapps 2008-03 as well as some other updates (incl. quicktime 7.5.5) with Software Update. After that the FCS2 applications ask for a serial nr., but will not accept the original one (Live Type works without serial nr. though). I'm absolutely sure that the serial nr. worked when I first time installed FCS2. I've updated before as well without problems (proapps 2008-001, I think)
I have tried deleting the Final Cut Studio System ID in library/application support/proapps, but didn't make any difference. Only thing I could think of is that I don't remember exactly what name and organization I typed when I first time licensed the FCS2. I guess that should not be an issue though. I have not moved any of the applications from the applications folder at any point.
Hope someone could shine some light on this problem.
BTW, re-installing the whole suite will not work for me as I'm working on another side of globe from the original discs and I really need to get things done here, and soon.
Maybe there is some way of uninstalling the update and going back to previous version?
MM

I bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.

i bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.

The message is correct. You can only register a product once... there is no need to register again after you do it the first time. You can re-install and activate with the serial number, but there is no need to re-register.

Hi, i purchased and downloaded the lr6 desktop app (update), and used my serial number from the email from adobe but it said it was only eligible for lr5. thanks, rich

hi, i purchased and downloaded the lr6 desktop app (updating from lr5, paid 80. for the update), and used my serial number from the email from adobe sentbut it said it was only eligible for lr5. thanks, rich

If you purchased an upgrade from LR5 to LR6 then after you enter your LR6 serial number, you will need to enter your LR5 serial number, unless LR6 finds LR5 on the computer. This also assumes that you've purchased the perpetual license of both LR5 and LR6, not a cloud license for LR5 which doesn't use a serial number for licensing. If entering a LR6 then LR5 serial number into LR6's serial-number area isn't working, then is there something special about the LR5 that would make it ineligible for an upgrade?

What is the difference between qued delta update and serialized delta upda

what is the difference between qued delta update and serialized delta update?

Hi Ks Reddy,
Queued Delta:
In case of Queued delta LUW's are posted to Extractor Queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. Generally we prefer Queued Delta as it maintain the Extractor Log which us to handle the LUW's which are missed.
Direct Delta:
In case of Direct Delta LUW's are directly posted to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUW's are directly posted to Delta Queue (RSA7) the application is kept waiting untill all the enhancement code is executed.
Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
https://websmp102.sap-ag.de/~sapdownload/011000358700007535452002E/HOWTOCREATEGENERICDELTA.PDF (need id)
http://help.sap.com/saphelp_bw33/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Business Intelligence Performance Tuning [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
How to load data
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Delta Types and methods;&#57245;
Hope this helps.
****Assign Points if Helpful*****
Regards,
Ravikanth

Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. This is an APPLE Itunes issue. Help!. HPPavillion DV6 64 bit, windows 7

Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community, I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0043AC7C0368E428
Current user is not an administrator.
The current local date and time is 2012-07-24 23:43:08.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
For example, here's what I get:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire X3400
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CAD7C0A1258F8
Current user is not an administrator.
The current local date and time is 2012-07-26 10:42:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16008)
Video Display Information
ATI Technologies Inc., AMD Radeon HD 6570
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d6a87ba725121aa1240b1ce936c23470
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ATAPI DVD A DH16ABSH, Rev YA12
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

Hello,
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

I just ran Software Update and now many applications crash on launch

Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro5,3
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.66 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    3 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    MBP53.00AC.B03
SMC Version (system):    1.48f2
Serial Number (system):    W89421D764B
Hardware UUID:    7BB966CD-37F8-5BAC-A3F0-4291C12873E3
Sudden Motion Sensor:
State:    Enabled
System was working fine. I ran software updates and got these three updates:
Safari 5.1.5
Apple Software Installer Update 1.0
iTunes 10.6.1
Now when I attempt to launch software, many applications crash. All crashes have the following error:
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
Referenced from: /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
Reason: no suitable image found. Did find:
    /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Any ideas? Thanks in advance for any help.
Scott

OK, well I solved my own problem by replacing this file with one from a recent TimeMachine backup. Looks like the update must have damaged this file ... strange.

How to install this update and solve USB and touchpad issues?

I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
Driver revision history:
Twinhan VP704A Driver Release note
Note:
1.In case the system crashes while running with VP704A, Please install ULI
USB 2.0 host driver in \ULiUSB20Driver
2. For XP/SP1, please update with the patch in
<http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
3.In XP/SP1, updating driver will crash the system, while new install is ok.
The trick to update driver in XP/SP1 is shown in the following steps,
a. Uninstall the driver
b. Unplug and plug the USB device
c. Install the driver
4. To support remote controller, please launch Agent.exe in \Agent.
Further details can be found in \Agent\Readme.txt
Known issues:
1. Multi-instance is not supported
2. Remote wakeup is not supported
3. High CPU usage in Analog audio/video capture
4. Bad VBI Signal using YUY2 color format
5. AV out of sync if audio captured from wrong filter.
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
6. Noise with analog-TV and FM Radio
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
Driver revision history:
2005/10/24, Version: 1.0.2.8
Bugs fixed and new features:
1.Crossbar not properly set.
2005/10/21, Version: 1.0.2.7
Bugs fixed and new features:
1.Firmware version read from FLASH OK!
2005/10/14, Version: 1.0.2.6
Bugs fixed and new features:
1.Mutil-Access driver blank part below part screen when VBI!
2.Mutil-Access driver HCT driver verify crash fix!
2005/10/07, Version: 1.0.2.5
Bugs fixed and new features:
1.Tuner Power off when S-Video,Composite.
2005/09/30, Version: 1.0.2.4
Bugs fixed and new features:
1.Agent.exe updated for repeat bug!
2.TI5150 Register for Video Format fix!
2005/09/29, Version: 1.0.2.3
Bugs fixed and new features:
1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
Note: "USB Audio device" filter provided by system does not support mutil-Access.
2.Reset TI5150 when a new frequency is set
2005/09/27, Version: 1.0.2.2
Bugs fixed and new features:
1.Fix I2C unstable access on some devices.
2005/09/23, Version: 1.0.2.1
Bugs fixed and new features:
1.Analog TV becomes darker sometimes.
2005/09/15, Version: 1.0.2.0
Bugs fixed and new features:
1.Fix INF for Windows 2000 installation.
2.FM radio scan policy changed!
2005/09/13, Version: 1.0.1.9
Bugs fixed and new features:
1.USB serial number string not visible with USBView, firmware update required.
2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
2005/09/13, Version: 1.0.1.8
Bugs fixed and new features:
1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
2005/09/12, Version: 1.0.1.7
Bugs fixed and new features:
1.Improve channel lock status check performance
2.Pinnacle INF Fix.
2005/09/09, Version: 1.0.1.6
Bugs fixed and new features:
1.Add some audio initialization function.
2005/08/31, Version: 1.0.1.5
Bugs fixed and new features:
1.NTSC & PAL mode resolution separation.
2005/08/30, Version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2.Frame Drop.
3.Pinnacle inf file HCT chkinf fail.
2005/08/22, Version: 1.0.1.3
Bugs fixed and new features:
1.Add Remote controller interface in digital source filter.
2.A new Remote controller test tool with source code in \Test_RC.
2005/08/16, Version: 1.0.1.2
Bugs fixed and new features:
1.Reorg Pinnacel & Twinhan's driver & folder.
2.VP704A_BDA_Test tool, add system code test.
3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
4.Firmware update
2005/08/15, Version: 1.0.1.1
Bugs fixed and new features:
1.Serial number function is lost while adjusting TV audio volume
2.RC6A CIR support
(This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
EEPROM should be flashed with \Firmware\M9207.bin )
3.Serieal number, MAC address and OEM device name supported.
Please refer to further details in \Firmware\readme.txt.
4.Ioclt sample source code included.
2005/08/08, Version: 1.0.0.10
Bugs fixed and new features:
1.Analog TV audio volume increase.
2005/08/04, Version: 1.0.0.9
Bugs fixed and new features:
1.Analog TV Video mode set failure.
2005/08/03, Version: 1.0.0.8
Bugs fixed and new features:
1.Off-centerf requency scan +/- 125Khz
2.Fix duplicated program scanned in MCE.
2005/08/02, Version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
2005/07/28, Version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
2.Improve I2C communication stability.
3.Unify Signal strength & quality indication as THBda ioctl interface.
4.Capture filter Lock status check.
2005/07/28, Version: 1.0.0.5
Bugs fixed and new features:
1. The same signal strength & quality indications as VP7046.
2. Debug build driver
2005/07/21, Version: 1.0.0.4
Bugs fixed and new features:
1.Update INF.
2005/07/20, Version: 1.0.0.3
Bugs fixed and new features:
1.Improve performance in PCM4
2.Switching from Analog TV Mode to FM Mode failure
2005/07/04, Version: 1.0.0.2
Bugs fixed and new features:
1.Production Tool FM test OK!
And here is the readme from the other file within the update ?
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
INTRODUCTION
This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
and Windows XP.
CONTENTS OF THIS DOCUMENT
1. Installation Instructions
2. Uninstallation Instructions
1. Installation Instructions
(Windows 98 SE & Windows ME)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system,then restart your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows 2000)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows XP)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- Click "NEXT"
- This program will install and load the driver and you don't have to reboot the
computer.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller", continue to install.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
Notice:
If you can't setup driver successfully. Please reboot your system and then follow
above steps to install driver again.
2. Uninstallation Instructions
1. Open "Control Panel" folder.
2. Invoke "Add\Remove Programs" icon.
3. Choose "ULi USB2.0 Driver" item.
4. Click on "Add/Remove" button to remove drivers.
Change List:
1.74
1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
2.support all USB2.0 Host Controller.
1.73
1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
4.fix issue that wirless lan will disconect when plug-in usb device.
1.72
1.Fix issue that system will crash when USB HD copy large file.
1.71
1.improve Power management function in Win98/ME.
1.70
1.Improve the function of devcie detection.
1.62
1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
1.61
1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
1.60
1.To support power management functions when a HUB with USB device plug into
a root HUB.
1.57
1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
2.Fix issue that audio can't display smooth when USB device attach to system.
3.Fix system can't detect USB dvice when USB device attach to system in
suspend mode.
4.Fix issue that when USB root HUB have full loading, USB HD sometimes
transaction fail.
1.56
1. Fix issue that DVD decoder device can't display properly.
1.55
1. Fix OTI USB 2.0 hand drive can't be detect issue.
2. Fix USB mouse can't use after resume from suspend.
1.54
1.Improve driver security.
1.53
1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
1.52
1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
automatically fix file system errors
2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
v.1.51
1. Improve USB 2.0 cardreader compatibility.
2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
v1.50
1. Improve bulk transfer
v1.48
1. Fix USB 2.0 LAN driver installation hanging up
2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
3. Fix some laptops Win98SE booting hanging up
v1.47
1. Improve bulk transfer performance.
2. Fix USB 2.0 bulk webcam preview failure.
v1.46
1. Support USB 2.0 and 1.1 Isochronous devices
2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
4. Improve device detection capability in Win9X/ME
v1.45
1. Fix system hanging up when resuming from ACPI sleep mode.
2. Fix mouse sometimes doesn't disappear when it's unplugged.
3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
v1.44
1. Support composite device
2. Improve device detection
v1.43
1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
2. Fix high-speed device detected as full-speed device
3. Fix some USB mouses detection failure problem
4. Fix some USB 2.0 hubs detection failure problem
5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
v1.42
1. Fix PC Card ejection hanging up in Win98/ME
2. Fix suspend/resume hanging up in Win98
3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
4. Fix some PC Card USB 1.1 device detection failure
v1.41
1. Add new feature that system can install driver before device is plugged.
2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
v1.40
1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
v1.32
1. Fix issue that driver can't detect Microsoft driver in Windows XP
if OS path is not c:\windows.
2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
v1.31
1. Fix issue that driver can't install on Windows 2000.
v1.30
1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
3. Fix issue that sometimes when you click "Scan for hardware changes".
to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
file can't be found.
4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
verison of ULi EHCI controller devices are plugged and unplugged.
5. Support installing driver for more than one ULi EHCI controller devices existing on
system at the same time.
6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
v1.20
1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
ULi Coporation. (ULi) web sites:
http://www.uli.com.tw/ (Taiwan)
CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

How to ensure a smooth update and smooth running mac

Hello all. First off this is not a 'help' or 'query' post, thanks to everyone in this Discussion who has helped me in the past for various mac problems, thought I "give back" and post some good tips and usage on "ensuring a smooth update and smooth running mac" in the long run.
Altogether I have 3 Macs at home to "maintain" (my iMac G5, MacBook and my sis's Mac mini Intel) and in the office my own G5 Tower and 2-3 other same G5s. So far I have "dare to say" (touchwood ) I have not run into any major problems while performing any major OS or Security Updates; I know some of these steps are mentioned and even "preach" many times, but by doing them, you avoid all the inconvenience in the long run:
Always Backup:
1. Whatever you do, invest in a 2nd hard drive and perform regular back ups!
2. If you have a G5 Tower or Mac Pro, get a 2nd drive or 3rd and install internally, if you have the other Macs, get an external FireWire Hard Drive.
3. Use SuperDuper, and pay the little shareware to get the additional automatic and scheduling functions to help you perform auto backups, or if you prefer doing the backup manually
4. For home users, I would recommend you perform a Backup once every 2 weeks. Heavy office/work use, I say once a week
Performing Updates:
1. Before Starting Up, unplug all external devices like FW drives, USB hubs etc, leave only your wired keyboard, mouse and internet connection (unless they are all wireless)
2. Start Up your mac, quit all running applications and Repair Disk Permission
3. Restart again and Repair Permission again
4. Quit all other running apps and also turn off Norton Anti-virus, run Software Update
5. Whether or not you have the Restart option after the update, Restart your mac
6. Repair Disk Permission
7. Shut down the mac, fix all the external devices etc
8. Start up your mac, Repair Permission again
9. Use your Mac as usual
I have been doing these since all the 10.4 updates and I have not encounter any problems with all my macs.
When a Kernel Panic occurs:
1. Restart the mac and boot into Single User Mode (fsck)
2. Run fsck and Repair the mac
3. Reboot the mac, Repair Permission
Regular Maintenance:
1. Get a Maintenance Utility like Cocktail, and pay for the shareware and schedule regular maintenance cycles.
2. The Mac OS also has a "built-in" maintenance script that runs in the wee hours (local time), so it is actually encourage that you at least leave your mac on overnight for at least one or two nights in the week.
If you do not wish your mac to be left on till the morning, you can always schedule in Energy Saver's Schedule options for the mac to turn on and off at your designated times.
I always leave my office mac on till about 4-5 am in the morning and I set things like Cocktail and NAV scans to run in those hours so they won't disrupt your day time operations, I do the same to my own home iMac.
These tips and pointers are not new and have been mentioned many times in these posts, but if you just take that extra little time to follow through, you will be ensure a better and healtheir running mac.
Cheers

You can enter your Mac's serial number at this site. Information, based on the serial number, will be shown. http://www.chipmunk.nl/klantenservice/applemodel.html Then tell us what model PB you have.
Usually, you get a blinking ? when no OS is installed. The startup tone (bong) you heard indicates the PB passed the startup hardware test.
 Cheers, Tom

SHPCON serial number updates item on delivery but not item in HU

I am using SHPCON to update the item on delivery with serial numbers. After that I use SHPCON to pack that same item in a handling unit. From the pack screen I should be able to select the item and hit the serial number button and see the serial number. Instead it says there is no serial number on the item. I populated E1EDL11 under E1EDL24 to get the serial number on the item. I also tried during packing populating E1EDL46 under the HU item E1EDL44 but that doesn't work either.
Anybody run into this issue?

Hi,
If your Sloc is HU managed then need to maintain serial numbers in HU only.
i think you are doing packing at shipment level, HU should packed and serial numbers assigned then finally assigned to shipment document.
Rgds,
Kris.

Serialized v3 update and setuptables

Similar Messages

Maybe you are looking for